How to replace/install Flyscreen Mesh | DIY
ฝัง
- เผยแพร่เมื่อ 29 พ.ย. 2022
- How to replace / install Flyscreen Mesh. The process for a screen door, window etc are the same.
For more DIY videos please LIKE, COMMENT and SUBSCRIBE.
Disclaimer:
Project Lex assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not Project Lex. - แนวปฏิบัติและการใช้ชีวิต
Thanks heaps for explaining properly ❤
You’re welcome
Thanks for uploading this. Wasnt sure if I needed to take the flyscreen door off to replace the mesh
No problem
That’s what I was worried about. I have to do it myself. I’m not strong enough.
Can replace without the need to take door off
Thanks! This video helped heaps!
You’re very welcome
Great video!! Gonna save me some cash, instead of getting a "professional"
Thanks. It’s very easy to do, enjoy
Nice job - how easy is it to make sure the wire is taut enough and not too loose??
Thanks. The mesh will tighten nicely when you push the spline into the grooves
For example, if you've rolled the spline into the left channel, then you've done the bottom, and now you're rolling the right channel, look at the mesh on the left side near the spline and see if it's lifted. If so, pull the mesh a little when rolling the right side, careful not to pull to much because it can warp window frames if that's what you're doing.
Makes sense thanks @@CrispyHulk1