Home Theater Receiver Menu Settings Explanation for Onkyo & Integra | Dolby Atmos, DTS X
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Tutorial for Dolby Atmos and DTS X Receiver menu settings. Explanation to configure Onkyo and Integra. This walkthrough is for home theater receivers. In particular Onkyo and Integra because they do share similar menus and options.
The TV inputs and outputs will be covered which will include Dolby vision and 4K upscaling settings. Zone 2 End Zone 3 through HDMI. The on-screen display settings .
Analog video input settings which include the game input, cable satellite, Stream box, PC, CD, TV, phono, Blu-ray and DVD. speaker configuration which starts at 2 Channel and goes all the way up to 11.1.4. subwoofer settings.
front height channels and rear height channels as well as overhead High channel speakers. Setting the speaker impedance. And subwoofer settings.
Setting the crossover which will include setting the speakers to full band with or too small and choosing the crossover frequency. Low-frequency effect filter and double bass explained.
Setting the level calibration which is the volume settings for each speaker. the graphic equalizer setting. Thx audio settings including loudness Plus. settings for mono Source signals, Multiplex. DTS and IMAX settings. Setting the volume. HDMI pass-through.
Power management such as the receivers Auto standby and sleep timers. And also a few of the quick menu features of the Onkyo TX - rz840.
#hometheater #onkyomenu #receivermenu If you would like me to consider reviewing your product please send a email to OldTradesAudio@Hotmail.com. All other product related questions should be posted in the comments section of the video.
I appreciate everyone's help and support in keeping this channel going. By clicking on the links, and making a purchase the same day, I may receive a small commission. This does not affect your purchase price. Many of these locations I have purchased from in the past. Some will have more advantages then others. Thank You for your channel support.
Brands Direct
SVS fxo.co/CilZ
Polk Audio fxo.co/Cil5
Marantz fxo.co/Cil6
Sennheiser fxo.co/CilD
Logitech fxo.co/CilF
Denon fxo.co/CilI
Monoprice fxo.co/Cilb
GoPro fxo.co/Cilf
Bose fxo.co/Cili
Sonos fxo.co/CixW
Multi Brand Stores
Best Buy fxo.co/Cilj
Ashley Homestore fxo.co/Cilk
Adorama fxo.co/Ciln
Abt Electronics fxo.co/Cilp
Ebay for used and new ebay.us/bGz5x6
GameStop fxo.co/CixX
Misc
Cinemark Theaters fxo.co/CixG Sideshow Collectibles and Statues fxo.co/Cj0K
If you would like me to review your product please send a email to OldTradesAudio@Hotmail.com Bowers and Wilkins www.pntrac.com... Definitive Technology www.pntrac.com... ..... Klipsch www.pntrs.com/... Crutchfield www.pntra.com/...
![อยู่คนเดียวกับเขา - ส้ม มารี (Zom Marie) [Official MV]](http://i.ytimg.com/vi/gq1cWAIQDLg/mqdefault.jpg)
Oh, my God! I feel overwhelmed trying to set this Onkyo receiver.
How did it go?
I used to run for while older integra with double bass sounded good had it plug to Cambridge tower 1 and pair of velodyne subs
Thanks for sharing that. Looks like a good combination.
Very good and thorough information. Thank you.
You are welcome!
Thanks for this, I really appreciate it!
Helped me out alot.
Glad to hear it!
very nice now i no how to use it.
The thing about the EQ is it can correct for a bad room. I have an old TX-SR608 and it just died so I ordered the TX-NR6050. I liked your video though I do not agree with all of it. You did give me an idea though. I will go through ALL my current setting and WRIGHT THEM DOWN before setting up the new unit. I have an SPL meter so the speakers will be set to a balanced level, I may run the Onkyo EQ mic calibration for frequency to see how that works.... It may correct for the room. I was not prepared to for $1200 (NR7100) or $1600 (RZ50) both come with Dirac live which I am told is a miracle worker.
I agree with you, I thinks equalizer it is very important, and onkyo it is the receiver I am looking for simple because has equalizer, I had one receiver with no equalizer built in and notice is nesesary
The 6050 didn't have any imax settings, not in LCD mode anyway. Got some 2006 Onkyo 7.1 for it, real good deal, got the old soundblaster Rx for the toslink because the motherboard has this blue plug with no label, it started to bother me alot, but the reciever only has eARC.
Svs Ultra Center enough power with Old Onkyo Tx N-3008??
Why doesnt this receiver have room correction to compensate for the nodes and reverb? My 8 year old pioneer had that and it did a good job.
I just picked up a used integra drx 5. Mix feelings
I dont know. Its well loaded for the price though
Great video ! Thanks my Dirac Life not working error message network connection.
(Error code: DU1001) I reseted the WiFi, the Onkyo 7100, MacBook, and iPhone and Nothing. Any suggestions? I was getting ready to return it, this unit just became available at Best Buy was waiting for 7 months, I also tried the Denon 3700 and the 4700 both had to go back 3700 was shutting down, 4700 left channel blew up incredible.
I am not able to get the quick menu up while watching live tv from Verizon Fios digital box. How do you bring it up? Iwould like to do like you did with isolating certain speakers. I am using the onkyo TX NR 838 receiver.
Which Onkyo Receiver do you use ?
My onkyo receiver TX-nr585 isn't connecting to my Samsung smart TV. I am looking to use the arc function. Not connected the sources to the receiver. They are connected to the TV. Pl can you assist
I got this receiver but I can’t get the center channel, back left and right surround to play any audio when playing movies/music. But when I tired the setup input in the receiver each channel played audio perfectly fine. I have everything plugged in correctly I can’t find an answer.
I can't get this screen to be on the TV. I guess I have to get an engineering degree. Does anyone know if I can set up only 2 speakers with my Onkyo 7.1? I've connected my receiver to the TV using an RCA to 3.5mm cable.
I just hooked up a tx-nr 727 onkyo. I had it for 6 years. Brand new. Back up for when Sony es 5300 failed. It failed. The hybrid standby light came on. Stays on. Is this ok?
Wait, why would you need to set distance? doesn't it have a calibration option?
I have a NR6100, will never never buy another receiver that I must hook up to a TV. My unit is in another room all wired up. Am I to get a 50ft HDMI cable to use my receiver?
My new Onkyo 6100 sends audio to the projector and not to the speakers (the speakers are connected correctly and working when playing via wifi ). what do I need to change in the configuration to send the audio to the speakers instead of the projector ?
Does it speakers indicators change on AVR display when different audio format is playing? For example for playing stereo only two indicators and for 5.1, 7.1 more speakers indicators, please let me know.
And one more thing. When pushing info button on remote control, does it show information about audio format type on AVR display? Thank you sry for my bad english typing...
Please help me my friend how you can get that menu on tv?
Do you know when the optimized audio will be available on older Onkyo models, like the RZ-730? Thank you in advance
Thank you for the video. I picked up an Onkyo TX-NR727 receiver. I am using it with Bose Acustimass speakers (5.1). After several attempts to refine the sound, I am struggling with how different TV channels send different signals. I hate to have to adjust the sound settings for each channel I watch. Is DTS the way to go or All-Room Surround? I would think these receivers could auto-switch to reflect the best sound for the signal it receives. Any advice?
How to fix volume setup fix. After power of receiver it’s automatically come zero
I have an issue where my klipsch rears are super quiet the tweeters sound like there going bad they don't distort there just quiet I have to turn the levels on the sides backs all the way up plus max out the eqfor sides rears. the front and center sound amazing the kevels one em are turned down we and treble bass is too I can't get to the speaker drivers in sides rears to replace em drivers in the dolbly atmos fronts and mains and center is fine its all klipsch rears and sides tweeters are just quiet I think its partially cuz mains Dolby atmos are new and center sides rears are are older but center sounds fine do ya know who could take a look at sides rears tweeters
Can we set it up the settings without speaker connection Sir? Because mine is in the repair shop and I leave my speakers in home.
I just purchased the 6100. Not sure what AV receiver you’re using in your video, but will I be able to do the set up on the TV screen like you’re doing?
I have 19 years old onkyo Receiver will it work with App?
Only in Jurassic Park.
This video is older but maybe you will respond, I'm using a Kicker L7 15" Pushing 1800 Watts peak with My home theatre system its obviously powered not with receiver it's already insanely loud but I'm wondering what you think I should be using for lfe for more bass? I'm just wondering if I could be getting even more then I have you can see my videos of the sub in the house and how it's powered
Does the sub channel EQ also starts with 25Hz?
i came to discover about the equalizer settings 10:32 but you said is not necesary ... i think it is because inspite of the quality of the speaker you can improve the audio that goes trough ... but at the end i am very disapointed because Netflix content is 2.0 they don't have any content on pure 5.1 so all this configuration is for nothing i play Netflix content the 80% of the time... is a shame the quality of Netflix is so bad.
What device are you playing netflix on? The audio output will vary for netflix per device. The best netflix will do is Dolby Digital + Over Atmos.
@@OldtradesReviews i use a Sony Android TV ... Over there is HD all digital 2.0 and i download the app for Windows as they suggest but is also 2.0 :( my home theather sounds horrible ...
Thats a shame audio is so bad.
@@fredyescape128 you may need to adjust the audio output settings of your tv. You may be outputting PCM which will give you 2.0 channel to your receiver. Change it to Auto 1 if it's set to PCM.
I have a Sony x900h Android TV and the setting is:
Settings/Display and Sound/Audio Output/Digital Audio Out
Rewatching Sandman right now through my Onkyo RZ820 in 5.1 and it sounds great.
I agree with the video creator that EQ shouldn't be used, and that you should set up an AVR by yourself.
I've always run systems like this, and still run my Onkyo 605 without EQ and with manual adjustments.
I respect your opinion on EQs, but the truth is that sound is somewhat subjective, additionally depending on age, heating impairment and different hearing acuity in people the ability to fine tune the sound is a welcome option. Also another time I would use the EQ would be to create my own kind of "night mode" or "quiet mode"- I know many receivers have a function like this, but usually they don't always work well. For instance there will be times where I want to cut below 90hz and increase dialogue mid frequencies if I'm trying to keep the volume down. Also sometimes the default settings do not correspond with you taste on the inputs. There are many reasons to use an EQ or not depending on your taste, the default might be great- but it's better to have one and not use it than to need one and not have it.
Never got an alert that someone responded to my post; sorry.
Of course, it was my personal opinion; some EQ systems will benefit certain rooms. I am of the school that suggests you should get your setup and speakers right before using auto setup and EQ systems.
Actually, I broke from my tradition of buying nothing but Onkyo AVRs and just bought a Denon X2800; I just can't get past Onkyos stupid decision to leave off the sound mode indicator on the front panels of the receivers. I hope the Denon works out for me...
Will this work with the Onkyo TX NR 6050?
Hello sir,
Please help me my speaker crossover setup (all speaker polk audio,av receiver marantz sr6015)
Polk audio- RTI A9 30HZ-26KHz hai -
RTI A1 50HZ '27KHZ -
CSI A6 45HZ 27KHZ-
RC 80I 35 HZ 20 KHZ
Subwoofer-
Lower and Upper Audio Quality -3dB Limits
25 Hz → 125 Hz
I think 80 hz would be fine. For all. Although the RTi a1 may do better with something higher like 90 or 100 hz. Depending on what the reciver has. Listen to it and see what you think. I have the Marantz sr7013 which the next setting lower is 60hz....but that will be to low for those speakers
@@OldtradesReviews Your advice has helped me a lot. Sir
Glad to help.
what volume should i use on my receiver when i set my LVL´S ?
I set it to about where I would normally listen.
Sadly not for my onkyo 360 av receiver. it's a network receiver thats useless as a network device.
So you didn't show your decibel level for you subwoofer in level calibration. What do you keep it at?
Ever figure it out?
Hi, I just got the onkyo tx-nr6050. I have it hooked up with energy take home classic 5.1 surround sound speakers. Do you know by any chance what the best settings are for the crossovers? I have it set to 80hz on all speakers.
I would look for the owners Manuel for those speakers.
@@OldtradesReviews That's what I ended up doing. I found out that my speaker were made by klipsch and vox. Couldn't find the model name to them. I was thinking they might be close to a setting in the receiver that I could set them to. Oh! by the way. Do you think that 100w per channel is more noticeable than 90w
@@darkliquid6388 10 is not enough to realize.
He skipped the one part i wanted to check out, the impedance settings
not much info on it. Only 4 or 6 ohm
You generally wanna run 6 and higher on most receivers although a decent receiver can handle 4ohms no problem as long as you don’t crank it or play loud for long because it tends to run your amps hotter, I have added fans sucking the hot air out the top and have never had one issue on my Onkyo.
5:52
вечер. Я не по теме, но может подскажите, у меня телевизор+ресивер с подключёнными к нему 9 колонок+сабвуфер, ресивер подключён к телевизору через ARC, к телевизору подключаю жесткий диск через USB 3.0, и проблема в том что не проигрывается дороги DTS:X и долби атмос хотя ресивеи, DTS:X еще как-то начинает играть секунд пять но потом звук пропадает, а долби атмос вообще не воспроизводится. И в чём причина я не знаю. Остальные форматы долби и простой dts проигрывает нормально.
Ресивер onkyo rz730.