Just ordered the 6100. Just gonna run it as 2.2 channel system. I like the 100 watts to make sure the 2 speakers get plenty of sound to fill up the 12x24 ft room.
(Onkyo TX-NR5100 + LG C1 + Klipsch Ref 5.1.2) I Finally set it up all today using Klipsch Mode in the Onkyo TX-NR5100 Menu. It sounds and feels insane! R-820-F R-52C R-51-M R-41-SA R-120SW
I HAVE A YAMAHA TSR-700 THE SOUND OF THE YAMAHA IS NOT AS GOOD HAS THE ONKYO HAS MORE POWER TO TI MY YAMAHA IS 100W BUT THE ONKYO HAS ALL SO 100W TO BUT I LOVE THE SOUND OF THIS RECEIVER IT SOUNDS AMAZING.WITH MY KLIPCH SPEAKERS R-620F WITH A CENTER RP-400C I HAVE ATMOS SPEAKERS TO R-41SA THIS A SETUP 5.1,2 WITH 2 SUBWOOFERS FORM KLIPCH.THIS A ONKYO TXNR-6100 RECEIVER.
Hi Dan, I read your comment and configuration of speakers used by you with onkyo 5100 I planning to buy these following speakers and use it with Onkyo 5100 Two R-820F floor standing One R-34C center Two R-51M surround Two R-41SA Dolby atmos One R-120SW The only difference between yours and mine is the center channel speaker 54 C vs 34 C I would like to know how this set up is performing for you for the last 2 years since you posted your comment. Has the power been enough with this 5100? Any issues so far? Recommendations? Thanks in advance
Bought the TX NR-6050 from costco on sale for $399, honestly a stupid value for a receiver which actually has 40 gbps 8k60/4k120 ports (looking at you Yamaha (and I think Marantz/Denon as well)). I'm a simple 2..1 man but went AVR to be able to use my speakers with my TV, Apple TV, and Series X, + the phono input for my turntable. This thing is seriously a ridiculous value. Also the ability to bi-amp using this amp is super cool being able to try it out without needing to buy anything beyond a couple more speaker cables.
Costco sells the tx-nr6100 as the tx-nr 6050 for $499. The only real difference is 10 watts less two channels driven @ 90 watts instead of the 6100's 100 Watts
My 7100 is being delivered tomorrow…I needed the 2 extra channels and the built in Dirac seems promising. I’ll be running a 7.1.2 system with the JBL Studio 2 series speakers. 290 fronts (Bi-Amped), 235C center, 220 surrounds, 235 rears, 550 powered sub.
Beautiful AV Receivers, all of them. I like how even the 5100 has Net / Internet Streaming available, as well as Bluetooth. Basically they are modernized 4K / 8K versions of what I have- a TX-NR616 7.2 Chnnl AV Receiver. // The 5100 / 6100 / 7100 are at great price-points for what you get.
I agree. I have the TX-NR686 and the 7100 is just an 8k version of it. Went from a TX-SR676 THX to the NR686 just for 4k and Atmos. TrueHD on both, but the NR686 seems a little more crisp.
How are they now on build quality/service ?!? When I found out (the hard way, back in 1999) Onkyo wasn't supplying needed parts to their authorized repair shops, i walked away from their products...and into the arms of Yamaha.
Gentlemen, as I was told by Mr. Lee Young, a contemporary of James B. Lansing while interning when I was a new minted millenial: Calm down, you'll get there. :) And be thankful to God, you don't have to choose between a reference audio systems and a wife/home/car, etc. I was lucky and got in on the royalty wagons of the analog era and could have it all. And I went INTO the "business". Onkyo was/is a mid brand, I was a Carver, D'Angelo, SCS, Hafler, Adcom, JBL kinda guy. Class A, of course. Just my 16core, RTX Quadro PC can do 8k uhd at 144hz on a 32" freesync monitor. Pro gear on the workstation, and the B&O out front. For home gear I like NAD, Accupahse too. Last thing, I actually have two pieces of Onkyo gear myself. The old TX-SR304 receiver and the TA-RW111 cassette deck. I'm selling the receiver for only $25.00 to a lucky person at a yard sale, making someone new to this game plenty happy. I'm keeping the cassette deck, it STILL smells new! :)
It is not only about 8K devices. 4k 120Hz VRR will only work on 8K input. So if you have Xbox X and PS5 and decent PC, you need 3 8K HDMI inputs already.
Back in the late 60's-early 70's Popular Electronics Published a two part article on a Solid State Crossover Network that had its own Built-In Power Supply. The crossover was engineered to drive the Bass,Midrange and Tweeters individually of each other.The article included a P.C. Board Print and the parts list for each frequency of the Speakers. The following month, it showed the specs for building a Speaker Enclosure for the Cross-over Boards to fit it and how to make the Enclosures Corner-Less. I have been searching for these two P.E. Articles for years?? Does anyone have any/remember any of the information on this project. This Cross-over System is nothing like what the cross-overs of today!?
Is Onkyo a reliable and a long term investment now? For quite some time, they were the red-headed step child of the AV world...prone to many problems with no solution. Yamaha and Denon were the go-to systems for a while. Lightning strikes are less of a problem when you have EVERYTHING connected to 1 or more quality UPS/battery backups.
Make sure you have adequate cooling as my TX-NR757 is burning up in my equipment cabinet so I have a burnt component smell that I can't use it and will replace.
The 6100 hooked up to my PC is giving me a pain in the ass. My previous Denon did not go blank when switching from youtube video to video. Earc and CEC is not working right either. I'm holding onto it for a while because I spent the money, but I'm going back to Denon after this unit.
What is the best choice of av receivers for listening the music in stereo, and do they have a loudness or something else that is replacement for loudness?
I miss the old 1975 Pioneer Receivers ( analog dial AM / FM pre-digital tuning ) , , I loved the black dial and the blue numbers and glass bar indicator . . .
Ok, so we have the electronics specs... But what about the sound quality? I mean we can mince decimals and numbers... But what is the difference in actual music and theater sound quality between the RX 50 and the NR7100?? Is one acoustically/to the ear better or is it all about the bells and whistles, This's and that's??
So I bought the Onkyo NR6050 (NR6100 w/o thx certification) and it sounds a little "hollow" until you turn the volume up to "65" I am not sure why this is? My TXSR608 (12 yrs old) always sounded full. Both were SPL leveled and room corrected with their AccuEQ. I have also purchased the NR7100 because with the Dirac I thought it would sound better? If it does I will be returning the 6050. If it turns out my speakers are the cause than that will be a whole new can of warms.....
Question about the new models. Do the new units support network playback of DLNA media? I see in the manual for the TX-NR6100, that the unit will work with "home network functionality". I currently have the TX-NR616 (looking to upgrade), that has the "DLNA" app and the "Home media" app that both play DLNA content. Does the 6100 have the same "Home media" app installed? I want to make sure the TX-NR6100 will play the DLNA content from my NAS unit. I do not see the DLNA logo on the units. Thanks!
Question for your upcoming Q & A Video. What is the difference between turntables since all turntables go round & round and have a stylus. Some of the turntables are $2K and WHY are they so costly?? Thanks for your time !!
good TTs need a steady 4 pole motor,, 3 pole motor that adds a whoosh and rumble to the speaker sound,,annoying,,,the 4 poleis are more quiet,,,,,the platter,,should be all metal, somewhat weighty for even and accurate speed,ought also to have a rubber mat,,,,a tone arm that adjusts the weight in grams and fractions,it should balance,,float when the cartridge plus the shell are joined,,adjusting the tracking weight dial at the tone arms' rear,,the cartridge should be of the magnetic variety,,they deliver high quality FM like signals from the record grooves,, a pre amp is a signal booster,necessary for the tiny bit of electromagnetic current to sound plump and loud,ceramic cartridges by comparison,deliver tinny, flat sound into the amplifier,their greater weight wears high frequency waves in the records it plays,small pieces of the vinyl are quickly worn off because of the greater weight of ceramic cartridges,,4 grams and more,,,,,vs the mag cartridge whose weight in the groove path is a gram and a half often less,= longer playing life for the records,,which you also need to keep clean, a cover for the player also keeps room dust from falling on the records,,,,a lot of this older equipment was a lot cheaper 30 years ago,,vintage items such as my set up, 70s receiver cost 30 bucks from a resale shop,I did have to spend another 50 bucks for repairs,the identical reciever several are up on ebay, go for 6 to 700 bucks,,,,,,your other choice keep meandering through thrift and resale shops learn to recognize good equipment it does take patience and learning what to look for,carry a sound device w an 18 in stereo plug w 2 rca phono plugs on the end,,so you can test equipment out in the field
I had the 6100. HDMI CEC didn't work if the unit was powered off for longer than two minutes. Return it and got another...then returned that one. It's a shame, it sounded so good.
Hi, I currently use the Denon AVR-X550BT with a 5.2 Klipsch surround sound. I have 1 12 inch subwoofer though. I want to keep increasing my sound system because I'm a maniac. What receiver do you think I should buy? I want at least 210W per channel.
@Just Audio thanx for the quick reply, having trouble finding if the pioneer lx305 supports dolby vision, also found Q1 2022 will be adding hdmi 2.1a, is that something to consider? Looking for something to use my series x at full potential. I also have klipsch speakers and saw the 7100 has a "klipsch mode", is that a gimmic? Like the vids btw
So question I have a Yamaha reciver rx 373 that's 10 years old and I'm looking to upgrade because I just recently upgraded my speakers in the front from the quintet.klipsch, to the m41 and 52c center so I'm looking for a budget friendly receiver. So amazon has the oynko 6100 on sale 499, been looking at Wi-Fi ones
Hi from France ! Do you have some informations concerning Onkyo and their new line-up, if there will coming to Europe soon ? Or not at all ? Can't wait to have a TX-RZ50.
I have three pioneer pieces that I bought in 1978 while in the USAF. Wondering if you may be interested in purchasing them ? CT-F1000 Cassette , PL-630 Turntable and TX-7800 Tuner. Let me know, thanks
Hello there - good comparison. I think made right choice by getting Onkyo NR7100. I connected 5.1.2 in Main zone and 2ch in Zone 2 - but I'm unable to play same audio in both zones when the source is TV. My TV is connected to the receiver's HDMI OUT using eARC, I'm trying to play TV sound in all zones (like a party mode). Do you know how to get it work? Not sure if Onkyos zone 2 takes HDMI audio.
Thanks for your helpul video introduction! I have a question reg. 7100; can I use the LINE OUT for a analog Vintage tapedeck (e.g. Sony TC-K 909 ES ) to record e.g. Music from TuneIn, Phono analog turntable , etc. playing over the 7100 ?
Sorry to hi jack this, but does any know if i run the onkyo tx sr674b avr in my garage with my tv, and run the zone 2 (obviously with another amp) and i have the sub in the garage, which channel will the sub operate with? the tv sound or the outside speakers playing zone 2 music in my pool area.....
I had that Addcom 3 Channel Surround Amp. It was great to pair with the GFA555 (which I still have). The sound tracking on that was phenomenal for the time (early 90's). I remember watching Speed and there was a scene where the vehicles went under a bridge. The sound started out in front of me (really behind the front speakers, then it went under me as the vehicles passed under the bridge, then back out level with me behind me. Too bad it died about 3 years into ownership.
I think this was the first time I saw that exact model. The Adcoms always work and sound great but do have issues from time to time. But typically fixable!
Would have loved to see you crack open these Onkyo units and the Pioneer ones in part 3 to compare them to your part 1 of the series and the Yamahas! Nonetheless, thanks for breaking down the latest and greatest 👍🏼
Hi there, just confuse to choose between Onkyo Tx Nr7100 or Marantz Sr6015. Fyi, I own Onkyo Tx Nr676 for now, but since it had problem with the HDMI board (according by Onkyo technician), and the part isn't available anymore, so I have to replace it with either one I mentioned. And I afraid if I choose Onkyo , is that possible the same problem will occur again with the tx Nr7100? I see on Onkyo official web, they stated that it has been refined for chassis, HDMI board, DAC, Digital/Analog inputs, power-amp grounds and power lines. I use the Tx Nr 676 only last for approx 2 years and HDMI board got problem. I really like Onkyo especially from how it sounds, really great. But I've traumatic because of the HDMI board issue. From people who I asked, they say Marantz is very close to Onkyo for the quality of sound, and I search the equivalent is Sr6015 with similar specs, except Marantz has Pre-Out but the Wifi still using Wifi 4 (a/b/g/n), and Onkyo has not pre-out, but it has THX certified and already Wifi 5 (a/b/g/n/ac). Both of them I-MAX enhanced. Thanks for your advice...
@@LennyFlorentine I'm wondering what brand and type of DAC in these ONKYO receivers ? I search in their official website, still can't find the details. It stated the DAC is 192 KHz / 24-bit only, no other details. My former ONKYO tx nr 676 has AKM AK4458 384 kHz / 32-bit DAC. Is tx nr7100 DAC downgraded from nr676 in case of that?
I just received my nr7100 today. I have dual SVS SB16 ultras. How is the calibration for dual subs? I’ve read they set it up as one and not separate subs.
But, I don't need 9 channels. Maybe I just want the pre-out section expanded. I think we should be able to customize our choices straight from the company..
My HT-R990 took a dump .. no sound guy at shop can not fix says there are no DTS chips to find >.?? So i guess i junk it and look for a nice up grade ... Might just look at other makers on receivers?? wish me luck..
I am interested in buying from you the Onkyo 6100.. My question is this.. I have a Pioneer 53tx that I am upgrading.. I can control my front, center rear and sub volume outputs from the remoter separately.. Can I do this on teh 6100. Very handy feature if for examle a movie has hard to hear center channel volume in a certain scene. I can quickly adjust as needed...
@@LennyFlorentine Wow, that was a fast response. Much appreciated.. I am leaning more toward the pioneer PIONEER Elite VSXLX105 but getting educated on that. Spent a fortune on the 52tx, but lacks a lot of needed features.
Thank you for a very awesome video, question, can I run a wide range of speakers off the 6100? For six or eight ohm speakers? Keep up the great work I love your channel.
@@LennyFlorentine thanx for the quick reply, having trouble finding if the 305 supports dolby vision, also found Q1 2022 will be adding hdmi 2.1a, is that something to consider? Looking for something to use my series x at full potential. I also have klipsch speakers and saw the 7100 has a "klipsch mode", is that a gimmic? Like the vids btw
I bought this Onkyo TX-NR787 (I think it looks like your 7100) 2 years ago and like I have posted elsewhere, it don't do ZIP. It has the same issue as yours displayed. SET UP TV. What makes anybody think there is even a TV involved. Suppose you just want it for a sound system to play your CDs? Cannot get this thing to do anything. Hooked up a speaker, managed to turn it to Tuner, a station came up that I'm familiar with. And nothing, no sound. So there is not much hope if I hook up my old CD Player. I spent a lot of money buying this at Best Buy. It's just junk, I'm currently looking for some vintage electronics that I know will turn on and work. Even my old Sony unit, that I was replacing because there is more room on this Onkyo for speakers, is at least reliable. I haven't had music in the house for over two years. I had disconnected my working Sony and stored it away. I was trusting that this Onkyo would make things better. I was wrong. It turned me into a poorer, frustrated, angry guy.
Sorry to hear about that. These are meant for use with tv, I would recommend a 2 channel receiver for 2 channel music. The employee at best buy should have never sold you an avr for 2 channel music. Check out ShopJustAudio.com theres lots of vintage gear that will get you fixed right up. Then, when you stop buying audio from best buy, and get it from us, you can be happy... not angry
I just got a TXNR7100,having problems getting rid of ARC,its connected to a projector,i disabled ARC but if i shut off the projector,the audio disapears as well,cannot set it up to listen to music only.I tried the second video output (Without ARC) set up video HDMI output to mai+sub =no output,to sub only= no output,At one point it worked (on main only) projector shut-off then after 10 minutes,the sound shut off,Think its defective,What do you think ?
hello, i own a set of klipsch black reference theater pack 5.1 speakers with additions ceiling speaker with I use as atoms ,I am looking at the Onkyo NR7100, or pioneer elite Lx 105 which AV system to buy for this speakers , i watch movies a lot and I like listening to music on streaming services.. pls advice thank you
@@LennyFlorentine thanks for the reply , LX305 are 9.1 , so I will have to get extra speakers right ? and I own an exiting Sonos system at home how do I connect the LX 305 to the Sonos system ?
Hi Just Audio. couled you PLEASE HELP me ? I've just bought TX-NR6100 and have annoying problem with passthrough. Is it possible to setup it well or I have to back my Onkyo to the store ? Problem - passthrough works randomly. When I turn on SAT BOX or Chromecast I would like TV to turn on only and use TV speakers till I do not turn on NR6100. In practice sometimes it works but usually receiver turns on itself and automatically external speakers are used. I HDMI options I have only OFF / Auto / Auto (Eco). No any other option to manually force particular source for passthrough. Any solution ?
I get weary of Onkyo after having two units only last a few years before the HDMI boards went out. Onkyo did warranty the first unit. What is a person to do? Shops say that they may or may not be able to get boards now with Onkyo Japan not playing nice with Onkyo USA. Is there anything true about that? I really liked my nr777 and it looks new.....just no HDMI anymore..... :(
Hello from Havre de Grace. Just found your channel…pretty awesome. Do you know if these receivers will work with all the features on my Xbox series x and LG C1? I want to make sure I find a receiver that passes the Dolby vision, 120 refresh, atmos, etc. my old atmos sound bar doesn’t. Thanks. I look forward to stopping by your shop!
@@LennyFlorentine Sounds great. I’ll definitely be stopping by in the next few weeks. I’ll need the receiver, speakers and whatever else you guys recommend for my basement. Thanks! Good to know there is a local store that can provide expert advice.
@@LennyFlorentine Yes, but that gets me to C$1800 instead of C$1350, just to use less power from a receiver. What is frustrating is that the Asia and Europe version of the 7100 have front left and right pre-outs.
can anyone confirm if the NR7100 displays the volume bar/volume overlay at 4K60? current AVR only shows at 4K30 and AVR is in cabinet so need volume feedback on screen
I have the 6100 hooked up to my PC is giving me a pain in the ass. My previous Denon did not go blank when switching from youtube video to video. I get clicking when transitioning. Earc and CEC is not working right either. I have great cables but have switched them out. I'm holding onto it for a while because I spent the money, but I'm going back to Denon after this unit.
Do you recommend using 7.2 setup with the onkyo 6050/6100 or 5.2.2 for gaming. I'm thinking that for gaming the better surround and positioning is more important than height since I don't think most games have height data anyway.
Thanks for the quick shipping on my 7100. Now I just need time to set it up 😉 (after the holidays)
Thanks for your support in buying one from us! I just put the same model in my house and setup was a breeze (and I'm not very techy haha 😅)
Just ordered the 6100. Just gonna run it as 2.2 channel system. I like the 100 watts to make sure the 2 speakers get plenty of sound to fill up the 12x24 ft room.
any problem with passthrough ? Please check my problem description
(Onkyo TX-NR5100 + LG C1 + Klipsch Ref 5.1.2)
I Finally set it up all today using Klipsch Mode in the Onkyo TX-NR5100 Menu. It sounds and feels insane!
R-820-F
R-52C
R-51-M
R-41-SA
R-120SW
I HAVE A YAMAHA TSR-700 THE SOUND OF THE YAMAHA IS NOT AS GOOD HAS THE ONKYO HAS MORE POWER TO TI MY YAMAHA IS 100W BUT THE ONKYO HAS ALL SO 100W TO BUT I LOVE THE SOUND OF THIS RECEIVER IT SOUNDS AMAZING.WITH MY KLIPCH SPEAKERS R-620F WITH A CENTER RP-400C I HAVE ATMOS SPEAKERS TO R-41SA THIS A SETUP 5.1,2 WITH 2 SUBWOOFERS FORM KLIPCH.THIS A ONKYO TXNR-6100 RECEIVER.
Hi Dan, I read your comment and configuration of speakers used by you with onkyo 5100
I planning to buy these following speakers and use it with Onkyo 5100
Two R-820F floor standing
One R-34C center
Two R-51M surround
Two R-41SA Dolby atmos
One R-120SW
The only difference between yours and mine is the center channel speaker 54 C vs 34 C
I would like to know how this set up is performing for you for the last 2 years since you posted your comment. Has the power been enough with this 5100? Any issues so far? Recommendations?
Thanks in advance
Bought the TX NR-6050 from costco on sale for $399, honestly a stupid value for a receiver which actually has 40 gbps 8k60/4k120 ports (looking at you Yamaha (and I think Marantz/Denon as well)). I'm a simple 2..1 man but went AVR to be able to use my speakers with my TV, Apple TV, and Series X, + the phono input for my turntable. This thing is seriously a ridiculous value. Also the ability to bi-amp using this amp is super cool being able to try it out without needing to buy anything beyond a couple more speaker cables.
Costco sells the tx-nr6100 as the tx-nr 6050 for $499. The only real difference is 10 watts less two channels driven @ 90 watts instead of the 6100's 100 Watts
Yes there is the Costco version out there if you are on a budget.
@@LennyFlorentine the real clincher though is if they ever have it in stock lol.
@@arena_rock_man9030 That sucks.
@Ohio Biker YES 2,1 TI WORS FOR ME.
Yeah, I just got that one as well. it seemed like a really good deal for 440$
My 7100 is being delivered tomorrow…I needed the 2 extra channels and the built in Dirac seems promising. I’ll be running a 7.1.2 system with the JBL Studio 2 series speakers. 290 fronts (Bi-Amped), 235C center, 220 surrounds, 235 rears, 550 powered sub.
Excellent! Let us know how it sounds, seems like a great setup!!
Beautiful AV Receivers, all of them. I like how even the 5100 has Net / Internet Streaming available, as well as Bluetooth. Basically they are modernized 4K / 8K versions of what I have- a TX-NR616 7.2 Chnnl AV Receiver. // The 5100 / 6100 / 7100 are at great price-points for what you get.
I agree. I have the TX-NR686 and the 7100 is just an 8k version of it. Went from a TX-SR676 THX to the NR686 just for 4k and Atmos. TrueHD on both, but the NR686 seems a little more crisp.
@@kriswingert1662 - IMO, they are great receivers. Congratulations and enjoy.
How are they now on build quality/service ?!?
When I found out (the hard way, back in 1999) Onkyo wasn't supplying needed parts to their authorized repair shops, i walked away from their products...and into the arms of Yamaha.
Gentlemen, as I was told by Mr. Lee Young, a contemporary of James B. Lansing while interning when I was a new minted millenial: Calm down, you'll get there. :) And be thankful to God, you don't have to choose between a reference audio systems and a wife/home/car, etc. I was lucky and got in on the royalty wagons of the analog era and could have it all. And I went INTO the "business". Onkyo was/is a mid brand, I was a Carver, D'Angelo, SCS, Hafler, Adcom, JBL kinda guy. Class A, of course. Just my 16core, RTX Quadro PC can do 8k uhd at 144hz on a 32" freesync monitor. Pro gear on the workstation, and the B&O out front. For home gear I like NAD, Accupahse too. Last thing, I actually have two pieces of Onkyo gear myself. The old TX-SR304 receiver and the TA-RW111 cassette deck. I'm selling the receiver for only $25.00 to a lucky person at a yard sale, making someone new to this game plenty happy. I'm keeping the cassette deck, it STILL smells new! :)
It is not only about 8K devices. 4k 120Hz VRR will only work on 8K input. So if you have Xbox X and PS5 and decent PC, you need 3 8K HDMI inputs already.
good to know. Thanks
Back in the late 60's-early 70's Popular Electronics Published a two part article on a Solid State Crossover Network that had its own Built-In Power Supply. The crossover was engineered to drive the Bass,Midrange and Tweeters individually of each other.The article included a P.C. Board Print and the parts list for each frequency of the Speakers. The following month, it showed the specs for building a Speaker Enclosure for the Cross-over Boards to fit it and how to make the Enclosures Corner-Less.
I have been searching for these two P.E. Articles for years?? Does anyone have any/remember any of the information on this project. This Cross-over System is nothing like what the cross-overs of today!?
Very interesting, I don't know about it, anyone else?
Is Onkyo a reliable and a long term investment now? For quite some time, they were the red-headed step child of the AV world...prone to many problems with no solution. Yamaha and Denon were the go-to systems for a while.
Lightning strikes are less of a problem when you have EVERYTHING connected to 1 or more quality UPS/battery backups.
Make sure you have adequate cooling as my TX-NR757 is burning up in my equipment cabinet so I have a burnt component smell that I can't use it and will replace.
The 6100 hooked up to my PC is giving me a pain in the ass. My previous Denon did not go blank when switching from youtube video to video. Earc and CEC is not working right either. I'm holding onto it for a while because I spent the money, but I'm going back to Denon after this unit.
What is the best choice of av receivers for listening the music in stereo, and do they have a loudness or something else that is replacement for loudness?
Is there better sound coming out of the high priced one.
I miss the old 1975 Pioneer Receivers ( analog dial AM / FM pre-digital tuning ) , , I loved the black dial and the blue numbers and glass bar indicator . . .
Ok, so we have the electronics specs... But what about the sound quality? I mean we can mince decimals and numbers... But what is the difference in actual music and theater sound quality between the RX 50 and the NR7100?? Is one acoustically/to the ear better or is it all about the bells and whistles, This's and that's??
For AV the Outlaw RR 2160.
For non AV use the Cambridge Audio CXA81.
So I bought the Onkyo NR6050 (NR6100 w/o thx certification) and it sounds a little "hollow" until you turn the volume up to "65" I am not sure why this is? My TXSR608 (12 yrs old) always sounded full. Both were SPL leveled and room corrected with their AccuEQ. I have also purchased the NR7100 because with the Dirac I thought it would sound better? If it does I will be returning the 6050. If it turns out my speakers are the cause than that will be a whole new can of warms.....
Is the 6050+ any good?
I still use my Kenwood 250 watt receiver and Marantz SP 1515 speakers, both from years ago...And my JVC turntable from the 80s as well...
Question about the new models. Do the new units support network playback of DLNA media? I see in the manual for the TX-NR6100, that the unit will work with "home network functionality". I currently have the TX-NR616 (looking to upgrade), that has the "DLNA" app and the "Home media" app that both play DLNA content. Does the 6100 have the same "Home media" app installed? I want to make sure the TX-NR6100 will play the DLNA content from my NAS unit. I do not see the DLNA logo on the units. Thanks!
Nothing matched the 70's stereos, they were a work of art.
Love this video and love Onkyo. Wish we had a store like yours in our area.
Is the 6100 good for Dolby Atmos 7.1 channel setup? I also want 120hz and Dolby Vision
Question for your upcoming Q & A Video. What is the difference between turntables since all turntables go round & round and have a stylus. Some of the turntables are $2K and WHY are they so costly?? Thanks for your time !!
good TTs need a steady 4 pole motor,, 3 pole motor that adds a whoosh and rumble to the speaker sound,,annoying,,,the 4 poleis are more quiet,,,,,the platter,,should be all metal, somewhat weighty for even and accurate speed,ought also to have a rubber mat,,,,a tone arm that adjusts the weight in grams and fractions,it should balance,,float when the cartridge plus the shell are joined,,adjusting the tracking weight dial at the tone arms' rear,,the cartridge should be of the magnetic variety,,they deliver high quality FM like signals from the record grooves,, a pre amp is a signal booster,necessary for the tiny bit of electromagnetic current to sound plump and loud,ceramic cartridges by comparison,deliver tinny, flat sound into the amplifier,their greater weight wears high frequency waves in the records it plays,small pieces of the vinyl are quickly worn off because of the greater weight of ceramic cartridges,,4 grams and more,,,,,vs the mag cartridge whose weight in the groove path is a gram and a half often less,= longer playing life for the records,,which you also need to keep clean,
a cover for the player also keeps room dust from falling on the records,,,,a lot of this older equipment was a lot cheaper 30 years ago,,vintage items such as my set up, 70s receiver cost 30 bucks from a resale shop,I did have to spend another 50 bucks for repairs,the identical reciever several are up on ebay, go for 6 to 700 bucks,,,,,,your other choice keep meandering through thrift and resale shops learn to recognize good equipment it does take patience and learning what to look for,carry a sound device w an 18 in stereo plug w 2 rca phono plugs on the end,,so you can test equipment out in the field
I had the 6100. HDMI CEC didn't work if the unit was powered off for longer than two minutes. Return it and got another...then returned that one. It's a shame, it sounded so good.
TX-NR6100 ist my favourite😀👍
So, the 7100 is 100W per channel (9channels) but would that wattage increase for someone with a 5.1 setup? Thank you, and great videos!!
Hi, I currently use the Denon AVR-X550BT with a 5.2 Klipsch surround sound. I have 1 12 inch subwoofer though. I want to keep increasing my sound system because I'm a maniac. What receiver do you think I should buy? I want at least 210W per channel.
Perfect timing I just got home
Why is the 6100 worth $350 more than the 6050? ($439 at Cosco)? Why pay $599 for the 5100?
@Just Audio thanx for the quick reply, having trouble finding if the pioneer lx305 supports dolby vision, also found Q1 2022 will be adding hdmi 2.1a, is that something to consider? Looking for something to use my series x at full potential. I also have klipsch speakers and saw the 7100 has a "klipsch mode", is that a gimmic? Like the vids btw
can you tell me if onkyo 7100 is quiet or have some humming from transformator or vents is lound or not when listen in lower volume?
So question I have a Yamaha reciver rx 373 that's 10 years old and I'm looking to upgrade because I just recently upgraded my speakers in the front from the quintet.klipsch, to the m41 and 52c center so I'm looking for a budget friendly receiver. So amazon has the oynko 6100 on sale 499, been looking at Wi-Fi ones
Hi from France ! Do you have some informations concerning Onkyo and their new line-up, if there will coming to Europe soon ? Or not at all ? Can't wait to have a TX-RZ50.
Onkyo Support said that it will be released 2.Q 2022
Is there a max length on the calibration cable going back to the AVR?
How reliable are they? I remember them from 15 yrs ago being not so great
Very helpful video! Greetings from Japan!
Fantastic video!! You guys are the best!!
Jammin my Onkyo TX-NR809 today. Wondering if i should use the bi amping option? 135 watts, will it make a difference? Polk Monitor 70 II.
I've been looking at the Onkyo TX-NR696, any thoughts?
Has Onkyo solved the issue of its hdmi inputs going out?
I have three pioneer pieces that I bought in 1978 while in the USAF. Wondering if you may be interested in purchasing them ? CT-F1000 Cassette , PL-630 Turntable and TX-7800 Tuner. Let me know, thanks
Can an external amp be added to tx-nr7100? And if so what amp would you suggest?
sound quality compare to yamaha A2A avantage?
Hello there - good comparison. I think made right choice by getting Onkyo NR7100.
I connected 5.1.2 in Main zone and 2ch in Zone 2 - but I'm unable to play same audio in both zones when the source is TV. My TV is connected to the receiver's HDMI OUT using eARC, I'm trying to play TV sound in all zones (like a party mode). Do you know how to get it work? Not sure if Onkyos zone 2 takes HDMI audio.
2nd Zone is analog input only right?
Totally agree. Onkyo delivers the goods.
Thanks for your helpul video introduction! I have a question reg. 7100; can I use the LINE OUT for a analog Vintage tapedeck (e.g. Sony TC-K 909 ES
) to record e.g. Music from TuneIn, Phono analog turntable , etc. playing over the 7100 ?
Sure can! ShopJustAudio.com
Sorry to hi jack this, but does any know if i run the onkyo tx sr674b avr in my garage with my tv, and run the zone 2 (obviously with another amp) and i have the sub in the garage, which channel will the sub operate with? the tv sound or the outside speakers playing zone 2 music in my pool area.....
Is it possible to do 2.1.2 Atmos setup with TX-NR7100?
I think you do a great job on your videos
Keep up the good work cheers Doug.
😁😆😂
Thanks Doug!!
I had that Addcom 3 Channel Surround Amp. It was great to pair with the GFA555 (which I still have). The sound tracking on that was phenomenal for the time (early 90's). I remember watching Speed and there was a scene where the vehicles went under a bridge. The sound started out in front of me (really behind the front speakers, then it went under me as the vehicles passed under the bridge, then back out level with me behind me.
Too bad it died about 3 years into ownership.
I think this was the first time I saw that exact model. The Adcoms always work and sound great but do have issues from time to time. But typically fixable!
The TX-NR7100 has Dirac Live and supports IMAX enhanced over the other two.
Is the IMAX enhance even worth it?
Would have loved to see you crack open these Onkyo units and the Pioneer ones in part 3 to compare them to your part 1 of the series and the Yamahas! Nonetheless, thanks for breaking down the latest and greatest 👍🏼
Since Pioneer had bought Onkyo, they are kinda the same.
Nicely Done.
Lookin at the 6100 and haven't heard anyone talk about the chips used for the amp/dacs or it's sound signature?
Thanks in advance :)
If Im only running 5 channels on the 6100, is it still the same watt output???
Hi there, just confuse to choose between Onkyo Tx Nr7100 or Marantz Sr6015. Fyi, I own Onkyo Tx Nr676 for now, but since it had problem with the HDMI board (according by Onkyo technician), and the part isn't available anymore, so I have to replace it with either one I mentioned. And I afraid if I choose Onkyo , is that possible the same problem will occur again with the tx Nr7100? I see on Onkyo official web, they stated that it has been refined for chassis, HDMI board, DAC, Digital/Analog inputs, power-amp grounds and power lines.
I use the Tx Nr 676 only last for approx 2 years and HDMI board got problem. I really like Onkyo especially from how it sounds, really great. But I've traumatic because of the HDMI board issue.
From people who I asked, they say Marantz is very close to Onkyo for the quality of sound, and I search the equivalent is Sr6015 with similar specs, except Marantz has Pre-Out but the Wifi still using Wifi 4 (a/b/g/n), and Onkyo has not pre-out, but it has THX certified and already Wifi 5 (a/b/g/n/ac). Both of them I-MAX enhanced.
Thanks for your advice...
That problem can and does happen with all of those brands, so if you like Onkyo go Onkyo.
@@LennyFlorentine I'm wondering what brand and type of DAC in these ONKYO receivers ? I search in their official website, still can't find the details. It stated the DAC is 192 KHz / 24-bit only, no other details.
My former ONKYO tx nr 676 has AKM AK4458 384 kHz / 32-bit DAC.
Is tx nr7100 DAC downgraded from nr676 in case of that?
Just having trouble deciding if the nr6100 would be the best choice instead of Denon s970h. Any comments to help me decide¿
What happened to ONKYO’S INTEGRA line?
Going to answer this one in our upcoming Q&A video :)
New subscriber. Would the onkyo 6100 be an upgrade to the denon 960H?
How is the power stage on these with 5 speakers running?
I just received my nr7100 today. I have dual SVS SB16 ultras. How is the calibration for dual subs? I’ve read they set it up as one and not separate subs.
Haven't tried it, let us know how it goes
This was good information, made me decide on the 7100.... which is out of stock😣, any idea when you'll have that available again?
Hola, que AV RECEIVER me recomiendan, tengo unos parlantes Polk TSI 100. Saludos desde Argentina.-
But, I don't need 9 channels. Maybe I just want the pre-out section expanded. I think we should be able to customize our choices straight from the company..
Hey - I just bought a Onkyo TX-303PRO and was wondering how good it is - ? I'd appreciate your thoughts! Thanks
Missed a couple letters: TX-SV303PRO Reciever/Amplifier. Thanks
My HT-R990 took a dump .. no sound guy at shop can not fix says there are no DTS chips to find >.?? So i guess i junk it and look for a nice up grade ... Might just look at other makers on receivers?? wish me luck..
Any brand can take a dump, but yeah look for a replacement
I really need to take the drive from Jersey for you guys can repair my Yamaha DSP-A1
I am interested in buying from you the Onkyo 6100.. My question is this.. I have a Pioneer 53tx that I am upgrading.. I can control my front, center rear and sub volume outputs from the remoter separately.. Can I do this on teh 6100. Very handy feature if for examle a movie has hard to hear center channel volume in a certain scene. I can quickly adjust as needed...
Ken, will find out on the 6100. I know on the new Pioneers there is a vocal control to turn up the voices and it works great!
@@LennyFlorentine Wow, that was a fast response. Much appreciated.. I am leaning more toward the pioneer PIONEER Elite VSXLX105 but getting educated on that. Spent a fortune on the 52tx, but lacks a lot of needed features.
Do you ever come across mid 70s H.k amps I really luv there build quality & sound?
Have one coming soon!
Thank you for a very awesome video, question, can I run a wide range of speakers off the 6100? For six or eight ohm speakers? Keep up the great work I love your channel.
Yeah but I would keep them the same. Sometimes its not great to mix them
@@LennyFlorentine sorry for the miss understanding. Can I run speakers as low as 4omes
Will be running 5.2.2. Bi-amped fronts. Was planning on getting the highly rated rz-50. Should I reconsider the 7100. How's the sdmi 2.1?
Go with the 7100 or the Pioneer lx305
@@LennyFlorentine thanx for the quick reply, having trouble finding if the 305 supports dolby vision, also found Q1 2022 will be adding hdmi 2.1a, is that something to consider? Looking for something to use my series x at full potential. I also have klipsch speakers and saw the 7100 has a "klipsch mode", is that a gimmic? Like the vids btw
you guys want to sell those Sansui sp-x8900 speakers ? i have a set need another pair though!
Still love my 686 bought in 2022.
I bought this Onkyo TX-NR787 (I think it looks like your 7100) 2 years ago and like I have posted elsewhere, it don't do ZIP. It has the same issue as yours displayed. SET UP TV. What makes anybody think there is even a TV involved. Suppose you just want it for a sound system to play your CDs? Cannot get this thing to do anything. Hooked up a speaker, managed to turn it to Tuner, a station came up that I'm familiar with. And nothing, no sound. So there is not much hope if I hook up my old CD Player. I spent a lot of money buying this at Best Buy. It's just junk, I'm currently looking for some vintage electronics that I know will turn on and work. Even my old Sony unit, that I was replacing because there is more room on this Onkyo for speakers, is at least reliable. I haven't had music in the house for over two years. I had disconnected my working Sony and stored it away. I was trusting that this Onkyo would make things better. I was wrong. It turned me into a poorer, frustrated, angry guy.
Sorry to hear about that. These are meant for use with tv, I would recommend a 2 channel receiver for 2 channel music. The employee at best buy should have never sold you an avr for 2 channel music. Check out ShopJustAudio.com theres lots of vintage gear that will get you fixed right up. Then, when you stop buying audio from best buy, and get it from us, you can be happy... not angry
What's better Onkyo or Pioneer Elite?????
I had an Onkyo stereo in my car in 1980. I out rocked all the cars in school 😀
I just got a TXNR7100,having problems getting rid of ARC,its connected to a projector,i disabled ARC but if i shut off the projector,the audio disapears as well,cannot set it up to listen to music only.I tried the second video output (Without ARC) set up video HDMI output to mai+sub =no output,to sub only= no output,At one point it worked (on main only) projector shut-off then after 10 minutes,the sound shut off,Think its defective,What do you think ?
Projectors and AV Receivers sometimes have handshake issues. Historically Onkyo's more than others. I would recommend trying the Pioneer LX305.
hello, i own a set of klipsch black reference theater pack 5.1 speakers with additions ceiling speaker with I use as atoms ,I am looking at the Onkyo NR7100, or pioneer elite Lx 105 which AV system to buy for this speakers , i watch movies a lot and I like listening to music on streaming services.. pls advice thank you
Both excellent choices. Maybe look at the LX305 though
@@LennyFlorentine thanks for the reply , LX305 are 9.1 , so I will have to get extra speakers right ? and I own an exiting Sonos system at home how do I connect the LX 305 to the Sonos system ?
Did onkyo ever fix there HDMI problems
Hi Just Audio. couled you PLEASE HELP me ? I've just bought TX-NR6100 and have annoying problem with passthrough.
Is it possible to setup it well or I have to back my Onkyo to the store ?
Problem - passthrough works randomly. When I turn on SAT BOX or Chromecast I would like TV to turn on only and use TV speakers till I do not turn on NR6100. In practice sometimes it works but usually receiver turns on itself and automatically external speakers are used.
I HDMI options I have only OFF / Auto / Auto (Eco). No any other option to manually force particular source for passthrough.
Any solution ?
I'd exchange it if you are having trouble.
What if I told you I still have the Onkyo SR606 😂 I was looking at getting a Denon av receiver though
How about 7100 vs RZ50?
Im looking for amp for CINEMA and STEREO - 50/50.
Which one is better solution to be paired with Oberon9?
RZ50 is better thah the 7100
@@LennyFlorentinethanks for the tip. I wilk share my experience after instalation.
I get weary of Onkyo after having two units only last a few years before the HDMI boards went out. Onkyo did warranty the first unit. What is a person to do? Shops say that they may or may not be able to get boards now with Onkyo Japan not playing nice with Onkyo USA. Is there anything true about that? I really liked my nr777 and it looks new.....just no HDMI anymore..... :(
Totally different company. No issues, they really cleaned up their act in the past few years. They have a large repair center that they use in the US.
@@LennyFlorentine Which repair center is that? My local shop used to be an Onkyo authorized repair center until Onkyo canceled them.
@@LennyFlorentine Do these 3 models have a FAN added to help the HDMI from failing?
@@123lenny135 no fans
My 8k enhanced isnt working to get 4k 120hz on my Xbox. Any idea what I’m doing wrong??
Hello from Havre de Grace. Just found your channel…pretty awesome. Do you know if these receivers will work with all the features on my Xbox series x and LG C1? I want to make sure I find a receiver that passes the Dolby vision, 120 refresh, atmos, etc. my old atmos sound bar doesn’t. Thanks. I look forward to stopping by your shop!
All the Onkyos and Pioneers will work. We have that exact setup at the store with the C1. Stop by and a see us!
@@LennyFlorentine Sounds great. I’ll definitely be stopping by in the next few weeks. I’ll need the receiver, speakers and whatever else you guys recommend for my basement. Thanks! Good to know there is a local store that can provide expert advice.
If I am going to buy a Japanese AV unit I want it MADE IN JAPAN!
7100 gets you Dirac Live!!! 😍
But still no pre-outs! 😟
Pioneer VSX-LX505 or Integra's for the preouts..
@@LennyFlorentine
Yes, but that gets me to C$1800 instead of C$1350, just to use less power from a receiver.
What is frustrating is that the Asia and Europe version of the 7100 have front left and right pre-outs.
@@LennyFlorentine
Pre-outs used to be common 10 years ago. Now they are only on high end receivers.
Hey man, if I have polk audio t50 , which receiver is better for it? , can 6050 or 5100 handle my speakers ? , appreciate it
Not sure what the 6050 is but any receiver should work fine with those speakers
Great videos. what do you think, Onkyo TX-NR7100 vs Pioneer Elite VSX-LX305?
Gonna find out cause I just brought home a 7100 to pair with my Lintons
I chose the 7100 over the LX305 cause it was open already. It's pretty much the same thing
Both get you Dirac Live
can anyone confirm if the NR7100 displays the volume bar/volume overlay at 4K60? current AVR only shows at 4K30 and AVR is in cabinet so need volume feedback on screen
Of you can find the 6050 at costco.
I thought they were getting out of the game. I'm still rocking a 2007 Pioneer Elite that I really want to upgrade.
I have the 6100 hooked up to my PC is giving me a pain in the ass. My previous Denon did not go blank when switching from youtube video to video. I get clicking when transitioning. Earc and CEC is not working right either. I have great cables but have switched them out. I'm holding onto it for a while because I spent the money, but I'm going back to Denon after this unit.
If i got 2 tvs side by side can i use 1 av reciever with surround sound, 1 speaker for left tv an 1 speaker for right tv (roblox on xbox son/daughter)
If you have analog out on both tvs, and put one tv in right channel input and one tv in left channel input, in theory it may work
@JustAudioHiFi thank you! I will try that soon as new tv arrives
Is there a Part 1???
Don't forget about Dirac Live on the 7100 :O
Do you recommend using 7.2 setup with the onkyo 6050/6100 or 5.2.2 for gaming. I'm thinking that for gaming the better surround and positioning is more important than height since I don't think most games have height data anyway.
Atmos is good on the series x
I got a 6100, plugged in the speakers. As soon as I plugged in power, I hear something pop and then smoke coming out of the top. 😰
awful
Great work!! Nicely done fellas…. BOOM
Thanks Joe!
I don't think this was mentioned. But the biggest difference the NR7100 has over the other two, is it has Dirac room correction.
Thanks!
The NR6100 doesn't have Dirac. Just the NR7100 and RZ50.
Ah yes! Hopefully we mentioned that at some point, if not great info!
You also neglected to mention the 7100 has a detachable power cord. This is important to some people. NBD