I had a 4x8 sheet of 1/8" sheared into strips (I didn't shear the unneeded half sheet and used it elsewhere) for the roof joint as it was cheaper than buying flat stock. A combo I find effective (I have five containers, including two 40' HC joined as a machine shop and two 40' HC with doors on both ends as motorcycle garages/shops) is a suitcase feeder for the wire welding and leaving my power source inside the container. I even put welder panel fittings (cheap) through one wall so I don't have to open any doors to weld outside. E71T-11 did fine for the sheet metal. For crusty parts like the corner fittings I ground out the joint and ran 6010 or 6011 (whatever box was closer, this ain't SpaceX) stick.
Oh no, I’ve never considered the weight of all the equipment on your head and the position of your body, dang, that does look really tough. What a tremendous amount of work it is dealing with steel, you and Viant are hard workers for sure. It is very good that you sit and admire what you’ve created because it is amazing!!
I think you both are doing a great job, most impressive. RE: welding I would of found it easier stick welding those flat bars, not so stopped over. With the right rods they can be dragged along in contact with the joint, no need to watch the arc.
Hey, how are you guys doing? I’m a welding student I would like to ask you guys what type of setting was your machine on and what type of one was this done with pul MiG or flux
When grinding it’s best to use a face shield as well as safety glasses. To cut down on the weight on your head, you might try a pancake shield like pipe liners use when welding. Thanks for the videos. Take care.
I paid my welders to weld and cut out and water proof each container i had a total of 8 containers needing welding. I paid around $14,000 and everything was done in two day's by three welders. My container house is a two floors with a basement. your house is very interesting i just wonder why you didn't want to build closer to the ocean for those views!
We built on the highest point of our land to maximize our views. Also the closer you are to the ocean the more windy and corrosive it is so it’s nice to be a little further back.
No we will have a structure above it. We welded the roof completely to make it water tight. I will be putting out videos in the future about our roofing structure so stay tuned for that! :)
Really glad to hear that! I am very far behind on editing so in real time we are almost dried in but as far as posting I am working on editing the videos of us converting the 7th container. :)
Thank you!! Yes some were pretty used and we had to refurbish almost all of them but we had to work with what was available. We got them from a few different places around Portland. 🙂
Awesome job, if interested I'm not sure how far along you actually are on this project, but I'm a plumber by trade and have accumulated tons of ABS pipe fitting, for the plumbing you are welcome to them for free, more than enough to complete your project, which will save you heaps of money all you will need to buy is the ABS pipe and glue.
@@PacificPinesRanch thanks just wanted to get an idea. I posted a couple of pictures of our build. I know what you mean it is like pushing a string up a wall trying to move forward. Lol
@@PacificPinesRanch I am VERY interested in your insulation plans... specifically: moisture "control" layer versus moisture*barrier* layer approach... I am considering either a Freezer semi trailer/Freezer marine shipping container - as they are spray foam in a compressed form in a vacuum process for consistency and control of curing & off gassing... according to at least one source... Or applying spray foam to the EXTERIOR to a depth of about R-50 on the sides and R-80 on the roof or just somewhere between... - then applying some sort of siding to protect foam (unless I can find a way to set up the siding or a secondary layer of shipping container wall and fill evenly and effectively bond to both so there is no trapping of moisture or pockets - this would be an ideal option) I plan/prefer to use Marine shipping containers/Corten steel... The idea of putting the spray foam on the exterior 360 is to safeguard any and ALL issues with off gassing of toxic chemicals from it, AND so as to be free to insulate to our hearts content WITHOUT losing valuable and quality of interior livability by sacrificing the dimensions inside to insulation....
@@PacificPinesRanch mold/ moisture is a major concern... As also is the damage that termites, ants, and mealworms and other can do to FOAM BOARD!!! - Something that I only recently discovered that ALL foam board is succeptible and the only ones that claim otherwise only offer an "aromatic scent deterrent" - which then begs the question of another chemical sensitivity/toxins AND how long before it fails and gets eaten anyway? And does it work on ALL crawling bugs that might devour it?
i appreciate all the hard work but i have to say all that welding is such a huge waste of time and money there are far easier ways to seal that seam and container. Stitch weld it together and use some type of silicone product
There’s definitely other ways to do it. That’s the beauty of it, there’s no “one side fits all”. One reason why we welded it all together was also for added strength.
That assertion is testable and I tested it. You're mistaken. Sealant can leak and wire welding is comparable in ease though not speed to sealant application. Welding is a better deal because (unless you spend megabucks and use something like Semkit aviation fuel tank sealant which would cost a few hundred bucks for that size joint) you only have to do it once. A major reason I use containers is recurring maintenance reduction and it's paid off. Welding containers is especially convenient because I leave my power source inside and ground to the shell then run my hot lead (I use a suitcase feeder) to the roof. Given the cost of quality marine/industrial sealants I'm money ahead running FCAW too. I used two partial rolls (.035 is best but I got away with .045" without burnthrough by starting the puddle on the container not the strip so I could use up the .045").
Silly... Why would you weld... Spray foam and sealant along with container clips is all you need you just spent money and did more work then you ever need too...
It’s not only to seal them, it’s to connect them together so they are one unit. Since we will have 3 levels and a rooftop deck it’s better for the strength. Also I’d rather completely seal them now and avoid any issues in the future.
@@PacificPinesRanchok:) but then you can't move them but I guess if your on unsure ground then you might want to make it stronger...I just know from experience you find really need to go through all that trouble... But I think if that works for you then go for it:)
@@PacificPinesRanch I'm sure your going to load up the inside with 2by 4 and think insulation and on and on and it would be cheaper to use ruff cut lumber I'm the end the idea of a container home is too use a container that take all the cyst out of the job.... Otherwise it's kinda a to waste of money to use old rusty containers....I was just trying to save you time and money but I also find want to get in the way of your ideas and dreams... So sorry just was calling it as I seen it on the way by...I didn't mean to....
@@ericjohnson8586 No worries! There’s definitely different ways to go about building & to each their own. Since we pretty much live in a temperate rainforest we have to be pretty serious about waterproofing, or our house will become a humidifier lol.
Welding is easy and leaves zero recurring maintenance is why I welded mine. Spray foam isn't even close to the durability of a welded joint. I speak from experience dealing with my spray foamed joints elsewhere (the end verticals) and I'm going to wire weld strips down those to cover them. Welding any of this stuff is so easy it barely qualifies as "work". It's also easy to make a structurally sound waterproof roof or side joint using angle instead of strips. Lay two sticks of angle back to back.. Tack weld the ends so nothing shifts (clamps can shift, tacks are precise). Drill bolt holes at your preferred interval through both. Insert bolts to snug them together after using formable automotive gasket maker (they sell large tubes) on the joint and anti-seize on the fasteners. I'd use stainless bolts (quite reasonable online) for corrosion resistance and (especially because stainless galls against other stainless) anti-seize the threads. The joint could be unbolted using any 12V cordless impact. I came up with that idea because three of my High Cubes are side-by-side on steel beams and I want to connect the most recent temporarily to the other two (which are welded together) for a few years until I'm ready to slide it outwards and erect a Steelmaster style container cover on that side.
One step at a time. Awsome example of what welding is all about.
Thank you!! 😊
I had a 4x8 sheet of 1/8" sheared into strips (I didn't shear the unneeded half sheet and used it elsewhere) for the roof joint as it was cheaper than buying flat stock.
A combo I find effective (I have five containers, including two 40' HC joined as a machine shop and two 40' HC with doors on both ends as motorcycle garages/shops) is a suitcase feeder for the wire welding and leaving my power source inside the container. I even put welder panel fittings (cheap) through one wall so I don't have to open any doors to weld outside. E71T-11 did fine for the sheet metal. For crusty parts like the corner fittings I ground out the joint and ran 6010 or 6011 (whatever box was closer, this ain't SpaceX) stick.
Love that idea! Thx for the suggestion!
Hello, living the dream I see.For self taught welding you are rocking it.I am a retired journeyman boilermaker admiring your welds.
Thx so much!! :)
Oh no, I’ve never considered the weight of all the equipment on your head and the position of your body, dang, that does look really tough. What a tremendous amount of work it is dealing with steel, you and Viant are hard workers for sure. It is very good that you sit and admire what you’ve created because it is amazing!!
Thx so much!! Yeah it’s definitely a long process! 🙂
I think you both are doing a great job, most impressive. RE: welding I would of found it easier stick welding those flat bars, not so stopped over. With the right rods they can be dragged along in contact with the joint, no need to watch the arc.
You are both hard woking...docent it feel good to work for your self? I want to be brave and build my own little house. Your house looks awesome.
Thank you so much!!
Hey, how are you guys doing? I’m a welding student I would like to ask you guys what type of setting was your machine on and what type of one was this done with pul MiG or flux
I can't remember the exact settings off the top of my head but I mig welded with flux core .035 :)
Way to go girl ,get your weld on,what more could a man want from his wife,mean job a+++
Thank you!! 😊
What threaded fixtures did you use to clamp the two together at the corners prior to sticthing em? I saw some threaded stock but coulsnt make it out.
They are called bridge fittings! :) amzn.to/3Zo8F2G
Hi your welding skills are awesome did you learn just for the project or are you a welder by trade , love your progress and commitment 👍
Thank you! I learned for this project.
@@PacificPinesRanch Amazingz! How long did it take you to learn welding, and what was that learning experience like?
When grinding it’s best to use a face shield as well as safety glasses. To cut down on the weight on your head, you might try a pancake shield like pipe liners use when welding. Thanks for the videos. Take care.
Thx for the advice!! 😊
What are the second level doors going to open up to? Are you going to put a balcony there?
A balcony.... eventually lol
What did you paint on the roof of your containers to seal it from all the moisture before the final coat of paint?
A marine grade zinc epoxy primer 😊
Is that 1/4 in gauge flatbar?
1/8" :)
I paid my welders to weld and cut out and water proof each container i had a total of 8 containers needing welding. I paid around $14,000 and everything was done in two day's by three welders. My container house is a two floors with a basement. your house is very interesting i just wonder why you didn't want to build closer to the ocean for those views!
We built on the highest point of our land to maximize our views. Also the closer you are to the ocean the more windy and corrosive it is so it’s nice to be a little further back.
Hi, awesome content! I have one question, how did you attach the ground hook in order to weld the metal sheet? Thanks!!
Thank you! I tack welded a small piece of tubing onto the container. 🙂
Can u show tutorial how to instal bolt..at the conner of contIner...
Great idea. I will try and include that in a future video.
Will this roof be exposed to the elements?
Is there any other waterproofing materials you will be using such as silicone or rubber roofing?
THANKS !
No we will have a structure above it. We welded the roof completely to make it water tight. I will be putting out videos in the future about our roofing structure so stay tuned for that! :)
This is really helpful ... thanks so much for posting it. How far along are you guys ...?
Really glad to hear that! I am very far behind on editing so in real time we are almost dried in but as far as posting I am working on editing the videos of us converting the 7th container. :)
@@PacificPinesRanch That is awesome to hear ...great progress!
These videos are amazing! Where did you buy your containers from? Were they heavily used?
Thank you!! Yes some were pretty used and we had to refurbish almost all of them but we had to work with what was available. We got them from a few different places around Portland. 🙂
Awesome job, if interested I'm not sure how far along you actually are on this project, but I'm a plumber by trade and have accumulated tons of ABS pipe fitting, for the plumbing you are welcome to them for free, more than enough to complete your project, which will save you heaps of money all you will need to buy is the ABS pipe and glue.
Wow thank you so much!! We have a little ways to go before we start plumbing but I will definitely let you know once we approach that step! :)
Was that fluxcore wire?
Yes
Nice!
Thank you!!
What is that Vulcan unit?
It’s one of the welders that Harbor Freight sells. Great machine for the price. 😊
How many feet a day were you able to weld
40’ if I remember well
@@PacificPinesRanch thanks just wanted to get an idea. I posted a couple of pictures of our build. I know what you mean it is like pushing a string up a wall trying to move forward. Lol
When you see s a light at the end of the tunnel it means get off the track a train is coming:)
You're nearly three years into this project and everything still looks the same as it did your first video in 2019!
I’m behind on editing. In real time we have all 7 containers placed and are almost ready to start the interior.
@@PacificPinesRanch
I am VERY interested in your insulation plans... specifically: moisture "control" layer versus moisture*barrier* layer approach...
I am considering either a Freezer semi trailer/Freezer marine shipping container - as they are spray foam in a compressed form in a vacuum process for consistency and control of curing & off gassing... according to at least one source...
Or applying spray foam to the EXTERIOR to a depth of about R-50 on the sides and R-80 on the roof or just somewhere between... - then applying some sort of siding to protect foam (unless I can find a way to set up the siding or a secondary layer of shipping container wall and fill evenly and effectively bond to both so there is no trapping of moisture or pockets - this would be an ideal option)
I plan/prefer to use Marine shipping containers/Corten steel...
The idea of putting the spray foam on the exterior 360 is to safeguard any and ALL issues with off gassing of toxic chemicals from it, AND so as to be free to insulate to our hearts content WITHOUT losing valuable and quality of interior livability by sacrificing the dimensions inside to insulation....
@@PacificPinesRanch mold/ moisture is a major concern... As also is the damage that termites, ants, and mealworms and other can do to FOAM BOARD!!! - Something that I only recently discovered that ALL foam board is succeptible and the only ones that claim otherwise only offer an "aromatic scent deterrent" - which then begs the question of another chemical sensitivity/toxins AND how long before it fails and gets eaten anyway? And does it work on ALL crawling bugs that might devour it?
It may seem a little out of date but sometimes a hand held face shield can give your neck welding in that position.
Thx for the suggestion!! I will look into that 🙂
Viant looks like a firefighter going up the ladder to rescue a damsel in distress
Lol that is a great perspective :)
Enjoy life that the Lord Jesus Christ gave you all .. it’s wonderful to see his gifts in others
Thank you!!
A stick welder would have been just as well, and easier. But nice job.
Thank you!!
👍👍👍👍👍
😊😊😊
Some knee pads are in order. Trust me on that one!
They do make a huge difference!
.
i appreciate all the hard work but i have to say all that welding is such a huge waste of time and money there are far easier ways to seal that seam and container. Stitch weld it together and use some type of silicone product
There’s definitely other ways to do it. That’s the beauty of it, there’s no “one side fits all”. One reason why we welded it all together was also for added strength.
@@PacificPinesRanch the container will never be as strong as all that welding.
@@Vegasoffgrid it’s more for the lateral support 🙂
That assertion is testable and I tested it. You're mistaken. Sealant can leak and wire welding is comparable in ease though not speed to sealant application. Welding is a better deal because (unless you spend megabucks and use something like Semkit aviation fuel tank sealant which would cost a few hundred bucks for that size joint) you only have to do it once. A major reason I use containers is recurring maintenance reduction and it's paid off.
Welding containers is especially convenient because I leave my power source inside and ground to the shell then run my hot lead (I use a suitcase feeder) to the roof. Given the cost of quality marine/industrial sealants I'm money ahead running FCAW too. I used two partial rolls (.035 is best but I got away with .045" without burnthrough by starting the puddle on the container not the strip so I could use up the .045").
Silly... Why would you weld... Spray foam and sealant along with container clips is all you need you just spent money and did more work then you ever need too...
It’s not only to seal them, it’s to connect them together so they are one unit. Since we will have 3 levels and a rooftop deck it’s better for the strength. Also I’d rather completely seal them now and avoid any issues in the future.
@@PacificPinesRanchok:) but then you can't move them but I guess if your on unsure ground then you might want to make it stronger...I just know from experience you find really need to go through all that trouble... But I think if that works for you then go for it:)
@@PacificPinesRanch I'm sure your going to load up the inside with 2by 4 and think insulation and on and on and it would be cheaper to use ruff cut lumber I'm the end the idea of a container home is too use a container that take all the cyst out of the job.... Otherwise it's kinda a to waste of money to use old rusty containers....I was just trying to save you time and money but I also find want to get in the way of your ideas and dreams... So sorry just was calling it as I seen it on the way by...I didn't mean to....
@@ericjohnson8586 No worries! There’s definitely different ways to go about building & to each their own. Since we pretty much live in a temperate rainforest we have to be pretty serious about waterproofing, or our house will become a humidifier lol.
Welding is easy and leaves zero recurring maintenance is why I welded mine. Spray foam isn't even close to the durability of a welded joint. I speak from experience dealing with my spray foamed joints elsewhere (the end verticals) and I'm going to wire weld strips down those to cover them. Welding any of this stuff is so easy it barely qualifies as "work".
It's also easy to make a structurally sound waterproof roof or side joint using angle instead of strips.
Lay two sticks of angle back to back.. Tack weld the ends so nothing shifts (clamps can shift, tacks are precise). Drill bolt holes at your preferred interval through both. Insert bolts to snug them together after using formable automotive gasket maker (they sell large tubes) on the joint and anti-seize on the fasteners. I'd use stainless bolts (quite reasonable online) for corrosion resistance and (especially because stainless galls against other stainless) anti-seize the threads. The joint could be unbolted using any 12V cordless impact. I came up with that idea because three of my High Cubes are side-by-side on steel beams and I want to connect the most recent temporarily to the other two (which are welded together) for a few years until I'm ready to slide it outwards and erect a Steelmaster style container cover on that side.