I have been studying different videos for days now...I am a costume designer and the brother is going to be the one...I saw the cricut but it looked complicated for what I need...same with the siloette...I don't want to have to buy special programs...not to mention the ease of the rhinestone feature which I need. I need to be able to scan in from my own drawings on embellishments...thanks to your well explained and easy to understand videos....thanks. You are very good at this☺️
All lot of us have been struggling cutting our vinyls on the half setting certain bits are just not cutting proper making weeding very hard . It just doesn’t weed as well as it did with cm range x
love my scan n cut dx 125 so much better than my scan n cut 350 just wish the mats were a little bit better the stick does not last long at all but tape does help keeps things down
A suggestion to #Brother is to enable the option of a numeric keypad for precise entering of measurements. This should be something you can do in software via an update. It helps to move your line of home crafting & sewing scanner digital plotter/cutter machines to the Prosumer level. Please also allow those of us who do not use Wi-Fi to have full access to the features we paid for! Downloading one pattern at a time is cumbersome at best. These can all be put into a .ZIP file for easy downloading and then unzipped into their own folders. Why do you make it so hard to get at the files? Is there a limit to the capacity of the USB Flash Drive? Can we use a self-powered USB Hard Disk Drive? Can the DX series read from USB powered external Hard Disk Drives like the WD My Passport?
What about the other two cord plugs or plugins on the other side of the machine from the power cord I didn't get a manual all I got was a quick start where would I get a CD operational manual and or a manual operation manual for this scanning cut
Great video I have been doing lots of research on these I am looking for something that will cut my patterns out for bag making such as cotton canvas vinyl water proof canvas ect… will this work for that?
The Brother SDX125E (and other SDX models) are able to cut paper with a thickness of 0.1 to 1.0 mm, fabric of 0.25 to 1.0 mm, and felt or a foam sheet (urethane foam) of 3.0 mm can be cut. These thickness values are approximate guidelines.
Do you know any way to safely remove some of the stickness from the Brother Scan n Cut SDX Standard Mat : CADXMAT STD 12? We love the way the machine works, but the mat is so sticky the left over paper sticks to the mat ver tightly and it takes a half hour or more to get the mat clean enough to use again,. I would like to know how to make the mat less sticky without ruining it. Thank you. Our Brother Scan n Cut is the SDX 125e. We just got it at Christmas 2020.
Hey I just got a new machine for the first time. I did the first craft that came with the machine it’s a little favor box. Is it normal for the outline to still be seen on the mat? Did I do something wrong? It looks like I basically cut through the mat even though I didn’t because it can’t be seen from the back.
It is normal for the mat to have cut marks from cutting the material/s but it should not cut completely through the mat that came with your Brother ScanNCut SDX125E or similar ones you may have purchased.
I got a brother scan and cut with nose operational manual it only had a quick reference guide and I didn't even get a CD instructional manual I've been trying to call brother and nobody will pick up their phone how do I go about getting these things the instruction manual not just a quick reference guide Andorra CD instruction manual
You are able to use tape that does not like strong adhesive properties when using thicker materials as long as the thickness does not exceed 3mm. Please see the video below for more information: th-cam.com/video/Adz0YXvSk3I/w-d-xo.html
I bought a brother cut and scan in April 2022 from Amazon but it didn't come with a mat so I ordered a mat and it won't recognise by the machine, I message on the website and was advised to call the number given but I live in Guyana the call rate is too expensive and so is shipping and duty paid. So I'm unable to return the machine or to contact anyone to help for my mat to be recognised. Any advice because I'm also a crafter and unable to continue to do things manually as before so hence the reason for my investment in the machine after months of research or does this machine not operational in Guyana?
Hello love all your work. Where can I get the blue brother tape? Also how do I activate (unlock)all the designs on scanncut canvas workspace? Thanks for your help Deidre
Deidre , you have to got to the Canvas website and register your email address and give your account a password, then you can register the machine you have, and then the projects are accessible for free and update each month with new projects. plus there is cards you can buy for different pattern collections from your brother store to unlock even more projects from Disney and Tattered lace for example. so go to canvasworkspace.brother.com/en/Home and sign up.
@@paulbailey207 Thanks Paul I have a account on canvas website.I registered my machine .I also registered the free card that came with my dx125 . Thanks again I'll go to the website in gave me.Deidre
@@deidresesker9284 I have found that the post-it tape works the best, it doesn't catch ahold of the paper like all the other tapes to and tear it when you remove it plus cuts it easily like it is part of the paper, not like the other tape where as sometimes it doesn't cut all the way thru.
I have been studying different videos for days now...I am a costume designer and the brother is going to be the one...I saw the cricut but it looked complicated for what I need...same with the siloette...I don't want to have to buy special programs...not to mention the ease of the rhinestone feature which I need. I need to be able to scan in from my own drawings on embellishments...thanks to your well explained and easy to understand videos....thanks. You are very good at this☺️
Great video. Got this for Christmas trying to learn all I can before I take it out of box.
Do you mind sharing the price? I wanted to know if there is a good deal if I buy during the holidays. Right now the price is $399.
Great video . I just got one , so this video is very helpful. Thanlylu.
All lot of us have been struggling cutting our vinyls on the half setting certain bits are just not cutting proper making weeding very hard . It just doesn’t weed as well as it did with cm range x
I am soooo gonna buy this on Black Friday y'all!
Love all your demos Julie
Well….I WAS decided on the Crucut Maker🤣
Can I please order the cut swatch?!!!!! 🙏🏾🙏🏾🙏🏾👏🏾👏🏾👏🏾
love my scan n cut dx 125 so much better than my scan n cut 350 just wish the mats were a little bit better the stick does not last long at all but tape does help keeps things down
Does this model scan 12x24?
A suggestion to #Brother is to enable the option of a numeric keypad for
precise entering of measurements. This should be something you can do
in software via an update. It helps to move your line of home crafting
& sewing scanner digital plotter/cutter machines to the Prosumer
level. Please also allow those of us who do not use Wi-Fi to have full
access to the features we paid for!
Downloading one pattern at a time is cumbersome at best. These can all be put into a .ZIP file for easy downloading and then unzipped into their own folders. Why do you make it so hard to get at the files?
Is there a limit to the capacity of the USB Flash Drive? Can we use a self-powered USB Hard Disk Drive? Can the DX series read from USB powered external Hard Disk Drives like the WD My Passport?
What about the other two cord plugs or plugins on the other side of the machine from the power cord I didn't get a manual all I got was a quick start where would I get a CD operational manual and or a manual operation manual for this scanning cut
Great video I have been doing lots of research on these I am looking for something that will cut my patterns out for bag making such as cotton canvas vinyl water proof canvas ect… will this work for that?
The Brother SDX125E (and other SDX models) are able to cut paper with a thickness of 0.1 to 1.0 mm, fabric of 0.25 to 1.0 mm, and felt or a foam sheet (urethane foam) of 3.0 mm can be cut. These thickness values are approximate guidelines.
Doing kiss cuts on SNC is much easier then cricut, I love all my cutting machines but SNC is my spirit animal...
Thank you for watching and we are glad that you love your Brother ScanNCut!
Do you know any way to safely remove some of the stickness from the Brother Scan n Cut SDX Standard Mat : CADXMAT STD 12? We love the way the machine works, but the mat is so sticky the left over paper sticks to the mat ver tightly and it takes a half hour or more to get the mat clean enough to use again,. I would like to know how to make the mat less sticky without ruining it. Thank you. Our Brother Scan n Cut is the SDX 125e. We just got it at Christmas 2020.
What’s the difference between the SDX125 and the sdx125E
Yea and the SDX125EGY
Hey I just got a new machine for the first time. I did the first craft that came with the machine it’s a little favor box. Is it normal for the outline to still be seen on the mat? Did I do something wrong? It looks like I basically cut through the mat even though I didn’t because it can’t be seen from the back.
It is normal for the mat to have cut marks from cutting the material/s but it should not cut completely through the mat that came with your Brother ScanNCut SDX125E or similar ones you may have purchased.
@@BrotherCraftsUSA okay, yeah it just leaves the outline of whatever I cut but doesn’t go through even when using half cut
I got a brother scan and cut with nose operational manual it only had a quick reference guide and I didn't even get a CD instructional manual I've been trying to call brother and nobody will pick up their phone how do I go about getting these things the instruction manual not just a quick reference guide Andorra CD instruction manual
What is the difference between the 125e and the 125egy?
@@BrotherCraftsUSA Thank you.
Can you etch on acrylic blanks?
would this be able to put print on tights or nylons?
Do I still need to purchase the rhinestone software upgrade for this machine?
I didn't notice if she changed mats. You aren't supposed to "cut" using the scan mat. Did I miss something?
Can i use blue painters tape on thick fabrics
You are able to use tape that does not like strong adhesive properties when using thicker materials as long as the thickness does not exceed 3mm. Please see the video below for more information:
th-cam.com/video/Adz0YXvSk3I/w-d-xo.html
Van you use the auto blade with the cmq600
Y
No you cant Hazelann, sorry The auto blade is only available for the dx series, not the cm series
I bought a brother cut and scan in April 2022 from Amazon but it didn't come with a mat so I ordered a mat and it won't recognise by the machine, I message on the website and was advised to call the number given but I live in Guyana the call rate is too expensive and so is shipping and duty paid. So I'm unable to return the machine or to contact anyone to help for my mat to be recognised. Any advice because I'm also a crafter and unable to continue to do things manually as before so hence the reason for my investment in the machine after months of research or does this machine not operational in Guyana?
Please contact Brother via email on Brother-usa.com for further assistance.
Hello love all your work. Where can I get the blue brother tape? Also how do I activate (unlock)all the designs on scanncut canvas workspace?
Thanks for your help Deidre
Deidre , you have to got to the Canvas website and register your email address and give your account a password, then you can register the machine you have, and then the projects are accessible for free and update each month with new projects. plus there is cards you can buy for different pattern collections from your brother store to unlock even more projects from Disney and Tattered lace for example. so go to canvasworkspace.brother.com/en/Home and sign up.
@@paulbailey207 Thanks Paul I have a account on canvas website.I registered my machine .I also registered the free card that came with my dx125 . Thanks again I'll go to the website in gave me.Deidre
@@deidresesker9284 I have found that the post-it tape works the best, it doesn't catch ahold of the paper like all the other tapes to and tear it when you remove it plus cuts it easily like it is part of the paper, not like the other tape where as sometimes it doesn't cut all the way thru.
Can I have google images on here and cut as well on vinyl
It cuts vinyl if that's what your asking.. and you can scan an image and cut around If that's what your asking.
Does this read PES Files?
The Brother ScanNCut SDX125E is able to read SVG and FCM files, but is not able to read PES applique files.
@@BrotherCraftsUSA thanks. Is there a scan and cut that reads pes files.
Where do you get the tape? Can you use painters tape?
I think I'd like to have one
I have had this machine year I hate it I can't use it I'm going to try one more time
Think machine doesn’t work as easy as as it does on here, even when you tape it and have a new mat
mejor compren un cameo o circuit. carisimas las navajas
I was so excited to get this machine, and then my computer started acting up, come to find out the software put a virus in my computer.
We want to help. Please contact Brother Customer Service at:
www.brother-usa.com/support
Mat doesn't work
Suggestion, don’t have another person talking on a demo. She kept interrupting and at times hard to hear plus very annoying.
Thank you for watching and for your feedback Sharon.
The valley-girl nasal voice is so IRRITATING
Personal insults. Do you like them?
mejor compren un cameo o circuit. carisimas las navajas
mejor compren un cameo o circuit. carisimas las navajas