ฝัง
- เผยแพร่เมื่อ 24 ม.ค. 2017
- Find out More: www.ft86speedfactory.com/brake...
------
Stop faster out on the street or on the track with these brake upgrades.
------
Snapchat - Ft86speed
Twitter - / 86speedfactory
Instagram - / ft86speedfactory
Facebook - / ft86speedfactory - ยานยนต์และพาหนะ
![[TH] VCT Pacific Stage 2 - Playoffs Lower Bracket Final // PRX vs DRX](http://i.ytimg.com/vi/5HwO1bQyAx4/mqdefault.jpg)
Please mention that it is recommended to wear gloves when dealing with brake fluid and brake dust. They are noxious things.
Should put the car on jack stands to get on the same level as us average Joe’s lol
At 4:28 someone drops something at 4:24 they realized how badly they ruined their day XD. Thanks for the video guys.
no shims on the brake pads?
you should carry the mu hc800 as well btw
Been watching these videos for about two hours now planning on buying an 86 this coming month
Did u buy?
Hello? Do you?
Very curious as to your purchase
Pro tip for cleaning up brake fluid - have a spray bottle handy with plain water. The water dissolves and stops the brake fluid from ruining paint of the finish on your calipers. We always spray everything down after bleeding brakes or replacing lines at the shop.
Will the car having abs influence the brake bleeding process? I heard that a scan tool will be needed to bleed correctly because of the abs
I'm coming close to a day I'll need to get new brakes and was considering the 499 stop tech setup you have. Are the ya similar setup / performance package you used in this video or more daily over part time track use? Also can you dispose this at the usual oil locations like Oreilys or Autozone?
Awesome video guys!!!
If you have the performance package, the ones that come with the Brembo brake kit, what brake pads can you use ? Is the Performance pack caliber a BBK?
I don't own a BRZ yet but these videos are very educational keep up the good work 👍🏻
do you have one yet?
How about now?
Had an 86 for 2 years now and absolutely loving it
@@blytzace Awesome! Happy for you. :)
@@Lusterredux thank you bro i really appreciate it ❤️ you have an 86 too?
how do you know what to torque down to?
Did you reapply silicone grease to those caliper pins?
Great video thanks!
Isn't some Loctite suggested to be put on some of these bolts
How can you tell when u need to changed them there’s no wear indicator
Why do you have to align the banjo bolt when you install it? The banjo bolt does not have to be in any direction and should just be tighten to spec. The brake lines are designed to fit the banjo in any orientation with the bolt properly sealed with the two crush rings. Am I missing something? Of all the brakes lines I have done, cars and motorcycles, I have never had to do this. Thanks in advance.
ur gay
I have never seen that done. I don't think factory manual specifies that either.
@@fontanasurron Ugh?
Came here to say the same thing. There's a reason the line is a circle around the banjo. The most important thing is the copper washers. Especially on a double banjo on a bike. 🤙
You should have listed links for the exact parts in the video
Do you need to reinstall the metal shims with install of the ns400?
you don't need to put back those back plates for the project mu brake pad?
Are you able to dispose the brake fluid at O'Reilly's or Advance Auto Parts?
how many bottle of brake fluid i need for change the front brake pad and brake line?
I need the best and strongest brake pad idc if its for racing would it be bettwr for street highway. Ect. Any help. And btw what spark plugs should i get for my frs the best for the engine. Everything stock. Just want best spark plugs
So what size is the rotors in front and in the rear??
Nice spoiler. Looks clean
Its the sard lsr. I have the carbom fiber version, looks so sexy
What performs best? This or the optional Brembos?
what would you suggest for my frs?
No greases or antisieze??
Pistons not needing to be repressed in ?
was this application only for the front only or front and rear? and what would be the difference of going either direction?
Front and rear. We didn't show the rear because the process is very similar to the front. If you did these upgrades to just the front, there would be too much braking bias in the front causing the front wheels to lock up a lot under hard braking.
can i have those Volks :,(
when should trans and diffs oils be serviced??
For the manual gearbox only whenit needs it. The LSD is every 2 years or 20k miles. You can just buy some dot4 oil and use it in both.
Is there any way to cover the brake pads? I want to be able to pick a calliper colour too, how would I do that?
Paint the caliper
Take the caliper out and paint it
Remember something he didn’t say always clean and grease the bolts !!!
Thomas is the best
Do you have to change the brake fluid if your just changing the rotors and pads?
Compressing the pistons on the calipers will cause air to be pushed into the brake lines, and it is therefore recommended to bleed or reverse bleed the lines to remove trapped air or else you might have spongy brake feeling.
Whats the best wireless torque wrench?
Shut up
Is their a review video for this brakes?
Sorry, not at this time. They will be a great street pad for your daily commute and spirited driving.
Can someone please explain to me what put it down to something pounds mean. Example put it down to 19 pounds.
I think you are referring to "torquing" it down to 19 ft/lbs. It means tightening the bolt/nut/screw to a certain tightness specification.
What kind of air tool is that and what kind of hose are you using to bleed the brakes
No air tools were used in the video, only a cordless ratchet and hand tools. As for the hose, it was just a random hose that we had laying around.
FT86SpeedFactory what brand cordless ratchet wrench is that? I feel like I'm stripping the bolts when I use regular hand tools on that 17mm.
It was a Milwaukee.
Sexy rotors, my next buy for sure
They are some pretty nice rotors.
Here's the link for more info - www.ft86speedfactory.com/dba-front-rear-slotted-t2-rotors-167.html#.WUqxMGjyskk
👍
Hmmm cool brake line trick but wouldn't that suck in air?
Gabzor not if you keep topping it off
@@KraveNPLUR how do you know when you’re bleeding the new brake fluid?
does this apply to old model 86? 2012-2013 toyota gts 86?
Yes it will work on older FRS and GT86 models
Here are all the brake parts - www.ft86speedfactory.com/brakes-42.html
whats the name of the rotors you introduced first? i’m not sure what DBA is it
will these rotors and pads fit over the stock wheels?
Yes they will.
Here's the link to the Rotors - www.ft86speedfactory.com/dba-front-rear-slotted-t2-rotors-167.html#.WOzkrIgrIkk
And here's the link to the pads - www.ft86speedfactory.com/project-mu-club-type-ns-brake-pads-2013-ft86.html#.WOzk5YgrIkk
how many set of pads does it come with in a box?
You'll need to order a box of fronts and a box of rear pads to do the whole car. Each box has four brake pads in it for a pair of wheels.
do you have to upgrade the break fluid when upgrading rotors? also is this rotor thicker than the stock rotor?
Worst brake pads from project-mooo👎🏻👎🏻👎🏻 why not get the bestop or b-spec?
Have you discontinued these rotors? If so why
Nope, we still have them
www.ft86speedfactory.com/dba-front-rear-slotted-t2-rotors-167.html#.WOZCRzsrIkk
project mooo hehehehehe
MU is a greek letter designating the company name
dope.
do all of them apply on 2013 toyota 86? :/?
Yes
Do not mix brake fluid!
たかちょん参 if your bleeding it all out it’s fine
sponsor me..
no.
Your intro is to long
And has the old name 😉