I have to get these off to do some rust repair on the doors but I’m terrified to break the bottom clips. Do you have a video on how to properly remove them? I don’t fully understand how the plastic springs work but I can tell they’re pretty brittle.
They will probably break they are brittle the doors are better then the quarter panel plus they have bolts on each side I do have a video on removing the door trim
Sup bro. My buddy is looking for the fuel lines off a 93 Fleetwood.. do u have any for sale?.. they curve up like the letter "J" up front.. should be a pressure n return like.. he needs both n they are discontinued..
Hey awesome channel, I put 14x6 wire wheels instead of 14x7’s cause it rubs in the back and the 14x6 works but when there’s weight in the back it still rubs hiw do you fix that problem
175/70/r14 it only rubs on the right side, and I have a 64 impala that does the same thing but I know with those you can shorten the rear end or get different ones but I thought the Caddy would be different
@@armandopatino8918 you can get some adjustable upper trailing arms and get it centered back up on the impala you can shorten your pan hard bar and pull the rear end back towards the driver side
![The Wall Song ร้องข้ามกำแพง | EP.213 | กรีน อัษฎาพร | 3 ต.ค. 67 [1/5]](http://i.ytimg.com/vi/3KrlLbCsadI/mqdefault.jpg)
Answer at the end 😂 💯
Goin thru this exact problem, thanks
Thanks for the vid bro!!💪🏽🙏🏽
No problem hope it helps
Are the rivets there or do I have to get a gun and put them in my self?
The studs are on the body already for the rear most clip the other clips the center pulls out and will allow the rivit to be removed
I have to get these off to do some rust repair on the doors but I’m terrified to break the bottom clips. Do you have a video on how to properly remove them? I don’t fully understand how the plastic springs work but I can tell they’re pretty brittle.
They will probably break they are brittle the doors are better then the quarter panel plus they have bolts on each side I do have a video on removing the door trim
th-cam.com/video/t2d2UN105f8/w-d-xo.htmlsi=SygVh_7O5eBXgl3P
I have a Cadillac 95 DeVille and I was trying to figure out how you take the back bumper off without turning the trim up
I'm not to sure on the Deville I only mess with Fleetwoods
Thanks for the info.
Sup bro. My buddy is looking for the fuel lines off a 93 Fleetwood.. do u have any for sale?.. they curve up like the letter "J" up front.. should be a pressure n return like.. he needs both n they are discontinued..
I got up with him hopefully I got him going in the right direction
Hey how can I take off dents off the rocker panel ?
I will search for a video and share it with you I dont remember who made on but I did see one about repairing stainless trim
@@thecadillacdanshow8658 thanks
@@tonyrose823 look up videos on how to do paintless dent removal and apply the techniques to trim or stainless steel trim repair on a 50's car
what number is that custom made clip? 6 or 9
9
Hey awesome channel, I put 14x6 wire wheels instead of 14x7’s cause it rubs in the back and the 14x6 works but when there’s weight in the back it still rubs hiw do you fix that problem
What size tire do you have also does it only rub on one side your axle may be shifted to one side
175/70/r14 it only rubs on the right side, and I have a 64 impala that does the same thing but I know with those you can shorten the rear end or get different ones but I thought the Caddy would be different
@@armandopatino8918 you can get some adjustable upper trailing arms and get it centered back up on the impala you can shorten your pan hard bar and pull the rear end back towards the driver side
What’d u do with the skirts
They are hanging out
The Cadillac Dan Show where’d u get the extended skirts or would u consider parting ways with yours
@@TheKansasfull they came with the car message me on Facebook and I can get you some pictures of them
Sell the the quarter panels
Sell me
They are in worse shape then I remembered I was talking to a guy today and dug them out and looked at them
Sell me that bent peace of metal
I have some available if you are still interested