Appreciate that. I’m making all my videos like this. No 10sec intro, no fancy graphics, no face time, no road trip footage, just straight to the point.
Highly underrated video. I'm a complete beginner and none of the videos I've watched on Holley's website came even close to making me feel confident. I feel like with this breakdown I can bring laptop to the garage and just keep hitting pause step by step. Thank you for this!
Ha ha. This guy's rough attitude is the best. Great freaking job on the information provided in this video. I guess I have to get an LS3 now so that my man card does not expire.
Hi great video! currently following along with my build. At 1:35 you write that the fans are triggered by default with the grey/red and grey/green, but at 3:31 you indicate using the grey/red and grey/yellow for the fan relay triggers. Could you reconcile which to use for the fans? Also wanted to clarify the difference in triggering for the fan and fuel pump relay--namely the difference in how ground triggering is set up. At 3:43 you note that the white connector should go to 12V key-on power and the black wire should go to one of the Holley fan triggers (i.e. grey/green or grey/red). However, if I understand correctly, the major difference with the fuel pump is that white is connected to the green Holley trigger (4:28) and black should be grounded directly to frame. Do I have that right?
Great video!! I’m doing a 68 Camaro. Where did you cut your hole to gain access to inside or recommend a location on my 68 to install the ecu ? Thanks in advance !
Where do I run the red and white wire for a constant while starting on a 86 Monte Carlo I have the painless 21 panel fuse box that I'm gonna rewire the cab with
I have paused this video @2:39 You should send this shit to holley bro, Best install video i have seen on youtube so far. More info in the first 2 mins than any other on youtube. Others talk about their damn cat and dog and all that shit we dont give two squirts of duck shit about.
this right here! I make all my videos straight to the point. I hate clicking on a video that says "how to do____" and its 20 min long and doesn't describe shit!
can you tell me what to do if i plan on twin turbos on my rebuilt forged junkyard engine? lol whats the difference??? what else do i need to worry about wiring in cuz this seems easy.
This is for 96-98 Cobra! " Don't use redline sensors / digital raising" "use stock sensors/ magnetic" now I'm only speaking for 96-98 cobra! His video is awesome but the Holley kit is not perfect and don't always use there instructions cause it didn't work for me 1: Holley pin for crank is pined wrong flip wires! 2: lower cam voltage to it's lowest! 3: don't use stock firing order! 🤔 No tuner figured it out! I did... and yes they are very experienced tuners! And I will be contacting Holley so they can rectify there instructions that don't mean anything for the 96-98 cobra! I hope this helps your welcome! SK COBRA
I don't even own a car and I just ordered a Holley Terminator X because of this video. This is guy is funny and straight to the point. great vid!
Lol
FINALLY!! A straightforward explanation for this system, and the humor was an added bonus, LMAO! Much appreciated man!
😂😂😂 all my videos are straight forward. No BS, no intros, no banter. Just info y’all want
If your girlfriend ordered your engine….
Son of a bitch lol
Best install video ON the HOLLET TERMINATOR X…
Bro! I appreciate this video. Straight to the point with no small talk.
Appreciate that. I’m making all my videos like this. No 10sec intro, no fancy graphics, no face time, no road trip footage, just straight to the point.
Highly underrated video. I'm a complete beginner and none of the videos I've watched on Holley's website came even close to making me feel confident. I feel like with this breakdown I can bring laptop to the garage and just keep hitting pause step by step. Thank you for this!
Appreciate that. If u need more help, I have a subscriber section on IG. I answer all questions and have better “how to videos” as well
Watched for the info, stayed for the comedy! Just subbed bro your pretty funny and get straight to the point of the video!
Ha ha. This guy's rough attitude is the best. Great freaking job on the information provided in this video. I guess I have to get an LS3 now so that my man card does not expire.
This is the best video on youtube regarding this lol
My dude kept it simple, love it!!!
Best video / sales men I’ve seen in a while 😂 I guess I’ll order the Holley now
jaja, if you followed me on IG you would see how anti-Holley I am lol
Love it brother!! Simple to the point with all the colorful words.
@@GordenAllen all the colors. Lol
One of the best videos that I have seen yet!
Appreciate that. My IG is even better, thanks though!
Appreciate. I’m trying to give the best, no BS, content out there
Your doing God's work my friend ...wiring up my harness looking to first start in 2 weeks time hopfully
Good luck! If u have issues, I have a chat on IG for subscribers where I help them diagnose their stuff
😂 bad ass explanation I’ve done 2 ls swaps and the hardest parts for me reading all the manual, but now I’m going to use this video 😅
awesome overview
Ayyy!!! Appreciate the feedback! I literally learned how to do LS Swaps by watching yalls videos when I started. 🫡🫡 ty for all y’all have done
Just got my harness and this video helped out a lot to understand. But I was gonna ask how do I wire up the alternator lol
depends on alternator. if you need specific help with this, subscribe to my IG. I can walk you through all the steps
Hey bro can you show how you wired it all up to the battery and starter inc alternator
There is more videos on my IG. But when I do the Chevelle I’ll cover that
Hi great video! currently following along with my build. At 1:35 you write that the fans are triggered by default with the grey/red and grey/green, but at 3:31 you indicate using the grey/red and grey/yellow for the fan relay triggers. Could you reconcile which to use for the fans?
Also wanted to clarify the difference in triggering for the fan and fuel pump relay--namely the difference in how ground triggering is set up. At 3:43 you note that the white connector should go to 12V key-on power and the black wire should go to one of the Holley fan triggers (i.e. grey/green or grey/red). However, if I understand correctly, the major difference with the fuel pump is that white is connected to the green Holley trigger (4:28) and black should be grounded directly to frame. Do I have that right?
🔥 video...not alot of videos point out the little things needed or not included.... 😎👍
Hey bro. You talking what the cuz understands bro. This is dope yeah.
Ty 🫡🫡
Well done. Been looking for his info & help for weeks.
Can you tell me how to hook the alternator and starter? Having some trouble with that.
subscribe to my IG and I got you! Thats where I answer all questions plus u get discounts on a ton of stuff
I just purchased this kit but with the 4150 throttle body for my chevy 350 !!
Great video!! I’m doing a 68 Camaro. Where did you cut your hole to gain access to inside or recommend a location on my 68 to install the ecu ? Thanks in advance !
Thanks bro very helpful and entertaining 👍
Where do I run the red and white wire for a constant while starting on a 86 Monte Carlo I have the painless 21 panel fuse box that I'm gonna rewire the cab with
subscribe to my IG and I got you! Thats where I answer all questions plus u get discounts on a ton of stuff
This video is exactly what I needed!😂
You are the man, no doubt💪💪💪💪
What’s your battery location in ur Camaro? And where did you put ecu?
Battery is in the trunk and ECU is under the dash. This was a customers car. Full build on my Instagram
I was able to pinch it, thanks for the video 👍
Great job!
What 30 amp relays did you use and relay for the fuel pump in this video?
a.co/d/9of6mDa
Dude you are hilarious! Loved the video.
Ayy… glad u get my sense of humor 🫡
Best video on the term for sure. Hey i relocated my battery to the trunk on my impala. Where did you get those pos neg nubbins on the firewall?
Amazon. Fastronix battery charging posts
This was great man. thank you
this guy funny as hell man
ty
personality win, I like it!
Thanks bro! 🫡🫡🫡
Flawless instructions your the best thank you
ty
Love all the info G! 🙌🏽💪🏽
🫡🫡
Do not require a transmission connector?
good explanation , good job
Great content you helped me out a lot man 👍🏾👍🏾
Awesome! I post more frequently on IG (Dame Name)
I have paused this video @2:39 You should send this shit to holley bro, Best install video i have seen on youtube so far. More info in the first 2 mins than any other on youtube. Others talk about their damn cat and dog and all that shit we dont give two squirts of duck shit about.
this right here! I make all my videos straight to the point. I hate clicking on a video that says "how to do____" and its 20 min long and doesn't describe shit!
About to watch this video a few times before I do my 64 rag 😂
Thanks for sharing the knowledge Bro! 👍
New subscriber 🔥🔥🔥🔥
Appreciate that 🫡
Great video‼️🤟🏾🤟🏾🤟🏾
Awesome video bro
Ty
Dude awesome
Rumor has it that you must use holley 02 sensor only,
aftermarket will not work. I saw this mentioned on several vids, just thought I'd drop it
What about alternator hook up?
you should hook it up. totally agree.
Great video 🫡🫡
can you tell me what to do if i plan on twin turbos on my rebuilt forged junkyard engine? lol whats the difference??? what else do i need to worry about wiring in cuz this seems easy.
What’s the link for that throttle cable
Lokar LS throttle body cable. If u search on Amazon I think only one comes up
Lol! You are funny......so if you had a throttle body that's drive by wire, is the IAC regulated by the computer?
drive by wire doesnt have a IAC
Best fucking video on youtube on the terminator x.....thanks
Bro you funny asf definitely got a subscribe from me
appreciate that!
Great video bro!!!
I have the dominator great products from Holley 😎
Well looks like im subscribin and irdering a termiator x. For what engine idk yet bet im sold 😂
What throttle body are you using?
Holley sniper 92mm
Mine went smooth but it has a rpm signal issue. Won't crank 😂 idk what to check. Everything was wired correctly
Whered u get ur relays?
What transmission do you have
tr6060 on the camaro
Now that was entertaining! lol
😂😂
Great stuff
😂😂😂..Good shit, covered all the basis.
You did that Cuz
🔥🔥🔥🔥🔥🔥
good video 👍
"If your girlfriend picked your motor you probably have a 4.8 " 😂😂😂
thats true right? lol
👍🏻👍🏻👍🏻👍🏻👍🏻
You don't like the Facebook LS group for beginners?
The amount of bad info I see on LS groups is amazing
I want to switch my BBC to the terminator system. Wish i had this in the first place.
😂😂😂👍🏽good stuff bro
🤣 great tutorial!
ty
Yo quiero ver la computadora aparte de la transmisión 5.3👍
Puse el secundo video
Thank you for being normal when explaining this shit
If you can’t install a terminator x after this video….give up!
Facts! 😂😂😂
Sometimes things aren't compatible specifically if you have to put LS things in a Ford to make it maybe work Terminator x is a piece of shit!!!
👌🏽👌🏽👌🏽👌🏽
ty
Thanks , love you break it down for dumbass like me
I can't get no spark
Is there a way to calibrate the touch screen? Meaning the touch points on mine are more messes up than Bruce Jenners sock drawer
This is for 96-98 Cobra! " Don't use redline sensors / digital raising" "use stock sensors/ magnetic" now I'm only speaking for 96-98 cobra! His video is awesome but the Holley kit is not perfect and don't always use there instructions cause it didn't work for me 1: Holley pin for crank is pined wrong flip wires! 2: lower cam voltage to it's lowest! 3: don't use stock firing order! 🤔 No tuner figured it out! I did... and yes they are very experienced tuners! And I will be contacting Holley so they can rectify there instructions that don't mean anything for the 96-98 cobra! I hope this helps your welcome!
SK COBRA
Man i lost fire to my car and its begin Three ways since i move it
Hell I read my owners manual lol
There’s always one! Lol
Soo what about the mx. Or the 4 8 5.3 🤣🤣
For those who rode the short but to school 🤣🤣
jaja, glad someone caught that
A1
You gotta be at 160 to set AIC
Wtf is an “AIC”?
Not going to lie the beeping is annoying had to shut this off
thanks for letting me know, I still dont care though
Been following you for a minute on IG glad you made a TH-cam subscribed 👍
🫡🫡🫡 ty
🫡🫡🫡🙏
Fuel sensor $175 WTF! ! !
😂 your man card 6.0 or 6.2 😂
lol at least someone caught that!
Pick me, rolli49
Pick me! @HornDogGarage
Pick me! Lsx_fooentes21
pick me vato @phatzchevy69
Pick me! @nbs_bryan_a
Pick me! @ls_swap_sd
Best video on the term for sure. Hey i relocated my battery to the trunk on my impala. Where did you get those pos neg nubbins on the firewall?
Amazon. Search “Fastronix Battery Charging Post”
@@LSSwapSD thank you very much