ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Audi EPC Light: How to Fix and Reset
ฝัง
- เผยแพร่เมื่อ 9 ม.ค. 2024
- Audi EPC Light: How to Fix and Reset. In this video you will learn the most common causes of the Electronic Power Control (EPC) light coming on your Audi.
Having trouble with your Audi shaking and the EPC warning light turning on? This common issue can happen without warning and leaves you stranded with a violently shaking car. In this video, certified Audi mechanic Brian from Honest Mechanic diagnoses what triggers the EPC system and limp mode to engage.
Learn what Electronic Power Control (EPC) means and how throttle communication faults cause your check engine light, misfires, and reduced engine power. We cover the leading culprits like failed camshaft sensors, bad coil packs, dirty throttle body and air flow sensors, carbon build up, worn spark plugs, injector issues, and more.
Read Guide here: thehonestmechaniccolorado.com...
Get straight forward DIY troubleshooting tips to determine root causes through on-board computer scans, diagnostics software data, and multimeter component testing procedures. Find out expected repair costs and best practices to get your vehicle driving smooth again while avoiding getting ripped off at the dealership. This detailed and easy to follow video provides insider clarity into why Audis shake when the EPC dash warning illuminates.
Whether you have an Audi A1, A3, A3,A4,A5, A6, A7 or Q5, Q7 the EPC light causes are the same.
KeyVideoTerms:
audi epc light, audi shaking, audi epc limp mode, vw epc warning, volkswagen electronic power control, audi throttle body, audi throttle position sensor, audi camshaft position sensor, audi accelerator pedal module, audi spark plugs, audi ignition coil
If you find this video helpful, please subscribe and share.
Disclaimer: This content is for educational purposes and should not replace professional advice. As an experienced mechanic, I aim to provide helpful insights, but I'm not liable for any damage or issues arising from the application of this information. Always consult a qualified mechanic for specific vehicle needs. Viewer discretion and responsibility are advised.
![CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!](http://i.ytimg.com/vi/Ldr3_fvTEXk/mqdefault.jpg)
Now its crystal clear! Thank you!
Glad it helped!
Very helpful thanks 🙏🏾
Glad it was helpful!
Petrol, 2.0 tfsi 211hp. EPC doesn apear every time when i put ignition. It s need to try beteeen 5 and 20-30 time to EPC apear . I noticed that after a longer trip, the EPC no longer appears when I try to restart. and gives me error TPMS, ESP, ABS, gear box and headlight adjustment. I have an error on almost all modules when I scan with VCDS. I'm interested if you experienced something like this, where the problem came from. when the car is started, it runs flawlessly, it doesn't jerk, it doesn't slow me down at speed.
I have an 2013 adui q7 and i changed the throttle body and i was still having the same problem. My q7 is supercharged so could it be that? I noticed a small throttle body in the supercharger but i haven't tested it yet
Hi Percy, can you provide more info please so I can give the best answer possible. are you getting any codes? what does your car do?
Can bad fuel quality raise epc warning? Im having same with my a5 2012 engine oil consumed very fast
Yes, bad fuel quality can indeed trigger an Electronic Power Control (EPC) warning light on your dashboard because poor fuel can affect the engine's performance and emissions. However, fast oil consumption is typically unrelated to fuel quality and may indicate other issues such as leaks (internal or external), worn piston rings, valve seals, or a problem with the turbocharger. Do you have an OBD scanner?
Been 2 month since i bought my a5 from a friend engine oil was topped up after 2 months ive been unlucky as there was a mixture of diesel in my fuel tank and when i went to a garage he said only 500ml of oil remained in the engine. Could this oil consumption have happened due to the diesel mixed with petrol
@@HonestMechanicChannel is their a specific code that the obd scanner shows for the worn out piston rings?
@@HonestMechanicChannel you think i should use a thicker engine oil since my audi is above 115,000 km
With mine if I hard accelerate the EPC light comes on and it shakes bad and misfires, the code I get is for cylinder 2 misfire.. however I can shut the car of and drive fine and the engine doesn’t shake.. it only does this when I put the pedal to the floor. I also replaced that cylinder plug and coil pack and still have the same issue.
Hi, The symptoms you describe suggest there could be an issue beyond just a faulty spark plug or coil pack in cylinder 2. Since replacing these didn't resolve the problem, you might be dealing with fuel delivery issues, a clogged fuel injector, or a more complex electrical or sensor-related problem. Given that the issue occurs under hard acceleration, it could also be related to inadequate fuel pressure or air intake issues. My bet is on a bad fuel injector on that cylinder
@@HonestMechanicChannel ok thank you, I believe it to be a fuel injector as well. It has 112,000 miles.
Hello
You can take out the fuel injector from cylinder nr-2 and place that to another cylinder
If the error code is on that cylinder then the problem is the fuel injector
Hey the epc comes on , on my C7 A6. It comes on sometimes when I turn the car on but not every time. Would could it be ? I do feel a slight decrease in power when it is on.
I'm having the exact same issue as you described, mine is a 2014 Audi A4. Took it to a mechanic who said it was the oxygen sensor (also called lambda sensor). Changed the one who was "supposed" to be faulty, only for the light to come ON again about 2 days later. Changed the other sensor (they're 2 lambda sensors), and again, about 2 days later the EPC light came ON again. I'm getting frustrated with this. I'm going to return to them tomorrow and see what they come up with. I'll let you know if I manage to have it sorted out and what they did to sort it out. I haven't taken to my local Audi dealership because they are ridiculously expensive.
I once was quoted R32000 (South african Rand) = USD1700, for rear brake calipers, that actually cost R7000 = USD380.
@@Alberto-qf7zh Did you get it fix and figure out what it was?
@@roned1nero579 Still no luck. I guess I'll have to save up and take it to Audi themselves 😒
My engine light came on and I have obd2 carista and codes are 21388 fault code - Exhaust door valve 1: Open circuit I’ve taken off the wire at the exhaust on both sides then the 2nd came up blown in them to clean desert and 1 open circuit driver side is still faulty not letting me reset EPC came on car was shaking and loud and kept driving engine light came on saying misfire as I kept driving for 5 mins only when in sports mode snd stopping the gas hard
Hello i have an a3 2011 s line epc comes on when I accelerate hard but goes off when normal.....what could be the issue?
Hi Mbach, how are your spark plugs?
@@HonestMechanicChannel I haven't changed them yet
I have an Audi s4 b8.5 and was driving home around 75mph. I went to pass a car and didn’t punch it but when my car downshifted is when it threw the code and started to shake. I turned it off and back on and I took it easy home. Any idea on this?
Hi, honestly, it's difficult to determine, but since the code disappeared after turning it off and back on, it might indicate something is starting to fail but hasn't completely gone bad yet, such as the spark plugs. The best approach would be to scan and check the code your S4 stored.
@@HonestMechanicChannel So it showed a misfire in cylinder 1 and 3 I just changed the plugs and coils for those and haven’t got anything yet. I think I’m going to change PCV soon.
Hello, my Audi Q5 2012 has this problem, the spark plugs and coils were changed and they scanned it and it doesn't show any faults, it vibrates sometimes other times it works well and it doesn't start well, it's time to accelerate
Hello, I recently had a fuel line come off on my car (weird issue) and after reconnecting the line, the epc light is on. Could this turn on simply from air getting into the fuel line/the car failing to start a couple times?
Hello,
I have codes p2293, p0343, EPC indication. I checked the camshaft marks, everything is fine. accelerates poorly at low engine speeds, after 2500prm, as if a second wind appears and the car begins to accelerate. Thanks
Hi Piligrim, managed sort it out? these codes can also be caused by the following
1. VVT Solenoid
2. Faulty fuel pressure regulator
3. Clogged fuel filter
4. Malfunctioning camshaft position sensor
5. Wiring issues related to the camshaft position sensor
Thanks a lot. I changed the fuel filter, changed the camshaft sensor, tried the working car, checked the wires, supplied 12 volts to the solenoid, it reacts. ordered another high pressure pump
@@HonestMechanicChannel Thanks a lot. I changed the fuel filter, changed the camshaft sensor, tried the working car, checked the wires, supplied 12 volts to the solenoid, it reacts. ordered another high pressure pump
@@HonestMechanicChannel I’m also thinking of checking the oil channels of the phase regulator control and the phase shifter
I solved the problem. there was a problem with installing the chain between the camshafts, one tooth
Hello, I have an Audi 6 2017. EPC goes and comes, I have taken it to two mechanics no codes are shown. Aside from the tips provided, any suggestions on what it can be?
Hello there, is the light comes and goes on startup or while driving? are there other symptoms alongside the light?
Hello, sometimes it comes on when I turn on the car, sometimes while I’m driving. Only when the EPC light is on, it will display Stop-start function non available.
I had the same thing at first check engine with cylinder miss fire and EPC light I changed fuel injectors and carbon cleaning for the check engine. For EPC I replaced a damaged cable that went to the gas pressure fuel. After that the car felt better but still had EPC going on in the high way. I had done an oil change at home and guessing by lifting the car up it activated the EPC so I did a EPC reset I seen on a website. After that no EPC light hope this helps!
It comes on when the car comes on and sometimes if it didn’t while the car is on. No other codes come on or any other signs of car destress
I have a 2015 A3. EPC has been coming on and off for about 350 miles. Same with check engine. I had codes read and got multiple. P0236 (said moderate issue). P0606, P0106, P0192 (said these were major issues). Any idea? Thanks!
Hi, Audi A4 2013 about 75000 miles, when the car is still cold it is no problem and the EPC light is off. If I drive for almost half an hour, stop and turn off the engine, if I turn it on back again usually the EPC light comes on and stays on. But there is no shaking or loss of power or anything noticeable in driving. Any advice what may the cause be?
Hi, Since this happens after a while, Since it only appears after driving for a while and restarting, it might be related to a sensor or electronic component that malfunctions when hot. Common causes include:
Throttle Body Issues: Dirt or malfunction in the throttle body.
Faulty Sensors: Issues with the mass airflow sensor (MAF) or crankshaft position sensor.
Let me know how it goes!
@@HonestMechanicChannel Thank you for your response. a basic OBD check shows engine fault 18062 Coolant Pump B control circuit/Open. Is that related?