YOU NEED THIS ON YOUR SIM RIG. Wheel+Adapter=AMAZING
ฝัง
- เผยแพร่เมื่อ 8 มิ.ย. 2024
- I felt like the small standard wheel that came with my Thrustmaster T300 wasn't enough, so I decided to take it a step further. I put a real NRG deep dish on the base of my T300 by only using a simple adapter kit I got from eBay. The result was pretty good. Let's take a look at it.
My Sim Build: • The BEST CHEAP Sim Rac...
/ mynametea
Patreon: / sometimesidrinktea
Insta: / sometimesidrinktea
The adapter I used(not affiliated with or paid promotion): www.ebay.com/itm/Custom-Wheel...
Thanks for watching! :) -Big TEA - เกม
At this point tea is just building a car that can’t move
You know it
That's a really awesome set up
Thanks homie 😁
2021 update: still seems to be holding up pretty well, subscribe if you want to see some more Sim VR content. I plan on dropping it soon!
does it mean no regret?
Thank You for the update.. could You please put the link where I can find the same wheel that You currently use.. fyi My Driving Simulator is Thrustmaster T300 Ferrari Integral
is it still good? doing it to mine tomorrow
hey buddy how's the wheel you still have it?
You still got the wheel?
My sims racing setup
I should be sleeping
Ultra-late comment energy🤣
My buddy pointed out that you mentioned me, and thus I appear. Thanks for watching my stuff, and yes the wheel does look good on there! Is it still holding up well, or have you moved up to a different wheelbase by now? Cheers!
Can i rig this for my t248. It could do with a larger rim for some sort of makeshift return and ffb gain. Wheel operates a little slow for rally but is a great gt3/f1 wheel. Incredibly precise for what it is.
Is that adapter can fit most racing wheels outhere?
Do i need to buy adapter for the new wheel? Or it will work with original one just remove the t300 wheel and just install the custom one
CAUTION ⚠️ 🛑
💥 When you pull out the cable connected to the stock steering wheel be EXTREMELY careful to not damage it, you need the original steering wheel plugged in for the buttons. If you don’t have it plugged in, it won’t even register the new wheel at all. 💥
I broke the clip on the end accidentally and it’s going to cost me $150 to fix 🔥
this is a t300 rs.... there is no problem when the wheel isn't connected...
In consoles I think you need it. In PC you can use it without buttons if you want..
@@Tsik.D.yeah believe thats a console thing. You just guide the end of the cable throught with a thick screw driver. Been a couple times i wanted to give up and rip it out but be patient it doesnt have much to get stuck on.
Can I use this on my console rig? As it will remove the buttons from the wheel on my TGT2? If so, does it have to have a controller connected?
So I actually used some L brackets stuck together to form an extension for the paddles which sit further out and forward now
Not a bad idea 😳
@@BigTea yeah it even added to the weight since I used very beefy ones and the clunk when shifting is very satisfying now
Do you think you need the hardware on there to fit the custom wheel on? I wanna just buy the base and fit a custom wheel and use controller for navigating menus. But 1. Will it fit like this 2. Will it not work cause it needs to recognize the wheel with the hardware. Idk any input?
How's the custom adapter holding up? The durability has always been an issue as I've noticed people have had them break before. I guess it's dependant on material too
Occasionally I’ve had to tighten a screw here and there, but otherwise it’s seemed to still hold up pretty good. Granted I don’t use it daily, but I’ve had multiple people put some use into it overtime and it hasn’t broken yet.
Will this work with tx servo base?
Does this adapter work for tsxw racer
Do you remember the name of that deep dish wheel might cop 1 myself.
Do you need to have the hardware of the original wheel on there? Cause I want to just buy the base and fit on a custom one like you.
Good question…I don’t *think* you need any extra hardware..maybe some screws..but I think the adapter comes with them.
i would prefer the to source an adapter that uses the standard t300 quick release so i can switch between a real wheel with no elecronics and the stock wheel. there are plenty of 3d printed adapters for sale, but they are pretty pricey for 3d printed parts, and being more complex/ fragile than the adapter shown in this video im worried it might break. hmmm. and it looks too complicated for me to figure out a way to make my own.
bro why even comment lol
@@jakemcgehee529 I dunno. It's just there are more options than shown in this video. Using the adapter shown you have to disassemble your stock wheel, it puts the wheel further out adding more stress to the shaft/ wheel base etc. But the adapter does not have to be as strong. If you buy the other adapter you can keep your stick wheel, switch between them etc.
Should I get the t300 base and buy t3pa pedals and diy invert and buy a aftermarket wheel for the t300 base or buy the Logitech g29
T300RS GT is probably the best deal for the money. I’d definitely recommend the t300 over a g29. I didn’t enjoy the feel of the gear driven wheel. It’s a good deal if you aren’t picky, but the t300 feels much more like a “real” wheel
@@BigTea yeah that’s what I was thinking I won’t be able to get pedals though cause I’m low on money so idk
Does this work fine till now?
Like the after market wheel does it make sound or the motors start making squeaky noises
No problems now. I’ve had to occasionally tighten the screws back to get rid of any of the play between the adapter, but that’s about it. The motor gets a little noisy after being used for a while, but it might just do that regardless.
@@BigTea
Okay:)
Sounds good
Thank you
Where can I get the 3d file
You sound so much like that popular Wow streamer. Can't remember his name off the top of my head. He does a lot of FF14 content now.
Do i need the buttons from the small wheel, or i can use only the new deep dish wheel with the adapter without any buttons?
You can use it with the buttons, they’re just hard to reach
Thanks!!! Any problems with the motor? Does it makes any sounds? Oveheating or something like that?
Im in a problem with mine I've putted the mod on it but the steering wheel wont start-up what's cause that problem? Sry for my bad English
I don’t think that should be a problem. It’s basically just a plastic spacer. The wheel doesn’t recognize it as anything weird.
@@BigTea ok and what about that little spring?
is it holding up as well? Any chance you could share 3d print files?
It’s been good so far. I bought the adapter from eBay but I’m sure you could find files for something similar.
@@BigTea thanks for the feedback. I'm trying to avoid long wait for shipping,and can't find 3d model NOWHERE
@@BigTea What was the actually adapter you got from eBay? What should I type in and search for?
Does g29 adapter work?
can you retrofit a fanatec BMW Gt3 wheel on the t300rs with his adapter?
Couldn't answer that tbh lol
@@BigTea did some research the answer is no sadly
Is the adapter compatible with a thrustmaster tx racing wheel?
Could be wrong so don't quote me, but I believe tx and t300 has the same fit, so this should work on both.
Will this work on ps4?
Bro, can you take off the adapter dimensions?)
Adapter is in the description homie
Anyone have any idea for t150
Hi , nice video, do you have the template for 3d printing
I bought it off of eBay, not sure where you'd find an STL. You'd probably need the metal hardware nuts like this one has though.
how many screws the adpater come with?
All that you need
@@BigTea does it come with screws for the other steering wheel that you put on the adapter
Can you give me the link to everything on your wheel please
Adapter link is in the description
Wheel is just a deep dish NRG
Hey! What game is it on 5:01?
+1 sub!
Assetto Corsa lol
Does it work for the t300rs?
Yeah, that’s what I put the adapter on haha
@@BigTea ohh ehh i just relised lol
How'd it hold up?
Very strong, sold the setup to a family friend a few months ago and it’s still going!
Sweet, im gonna have the neighbor print me an adapter, already have a wheel so figured might as well 🤙🏻
Why no one talking bout that mouse pad tho 💀
OMG who'd use a wheel that big lol 😂
It’s not even big it’s 350mm like what are you talking about 💀
the normal wheel is small af, this one is closer to an actual steering wheel people would use in an actual car
Update?
Still holding
are you ray's son?
Who
@@BigTea Ray Romano , Lol you sound like him!
Dont go for a cheap ebay they will snap 100%
No they won't lol. Update video soon