Replacing An Old Broken Window - New Construction vs Replacement Type Windows

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ต.ค. 2024

ความคิดเห็น • 29

  • @SourcePortEntertainment
    @SourcePortEntertainment  4 ปีที่แล้ว +2

    💡 Hey Guys! Thanks for watching. If you like this video please Subscribe and Turn Notifications ON, give this video a Like and Comment as well! Do forget to watch our Soda Can Battery - Power From Trash Video th-cam.com/video/0F8cE4N42NQ/w-d-xo.html and our Old Splitting Maul Handle Replacement video th-cam.com/video/4Wkte06UWnU/w-d-xo.html

  • @woodyg768
    @woodyg768 2 ปีที่แล้ว +1

    I too bought the wrong windows,and wasn't exactly sure how to do this. Your video explained everything i needed to know,simply and clearly,thank you very much! I'll be doing two of these today,i was dreading it until just now,thanks again.

  • @FixItYerself
    @FixItYerself 3 ปีที่แล้ว +4

    It looks great! thanks for the info.
    My only concern about installing it exactly the way you did would be having screws in the bottom of the window; personally, I'd feel better removing them and sealing the screw holes in the sill and window. Since screws are going into the bottom sill, which is usually where a window drains, I'd be worried water might find its way through the sill.

  • @angelisone
    @angelisone หลายเดือนก่อน +1

    So the window that has Nail Flange Strips (1:35) is called New Construction?
    Then given if they are the same size, which is cheaper to buy a New or Replacement?

    • @SourcePortEntertainment
      @SourcePortEntertainment  หลายเดือนก่อน

      New construction style was the only one Lowe's had in that size. Not sure if one is cheaper than the other normally. Thanks for watching and commenting!

  • @natetremblay8537
    @natetremblay8537 3 ปีที่แล้ว +2

    Couple things you may want to fix ASAP.
    The end grains of all your trim needs to be sealed with primer and paint, the water will soak right in like a sponge there.
    You should also pull the top header piece of trim and install metal drip flashing and then look into pulling all your trim and using flashing tape to seal up the spacing between where you added the foam sealer.
    Watch vids on those parts cause there’s a technique and sequence on how to do all that.
    Then after you out all your trim back on go around caulk any cracks spaces or gaps where the trim meets each other and where the siding meets the trim.
    If you do all that, then you won’t have anything to worry about for a few lifetimes, except maybe some touch up paint here and there to the wood trim.
    Nice job though!

    • @SourcePortEntertainment
      @SourcePortEntertainment  3 หลายเดือนก่อน

      How did I not see this comment before? Sorry for the delay and thank you for your advice. Please like and subscribe if you like my content.

  • @shyamdevadas6099
    @shyamdevadas6099 2 ปีที่แล้ว +1

    Very helpful video. Thank you!

    • @SourcePortEntertainment
      @SourcePortEntertainment  8 หลายเดือนก่อน

      Glad you found it helpful thank you for watching and commenting. Please remember to share this video and subscribe it really helps out our channel!

  • @danielcheng769
    @danielcheng769 4 ปีที่แล้ว +4

    Interesting... I'm doing renovation right now and mistakenly ordered 9 new construction type windows instead of replacement windows. So you're saying all I need to do is to cut off the nail flange then there's no difference between the two? Thanks

    • @SourcePortEntertainment
      @SourcePortEntertainment  4 ปีที่แล้ว +1

      Basically yes! Do your own research but that is what I have found. Window is still installed securely and working great. You make the decision, and let me know how your project went.

    • @lpzlpz8374
      @lpzlpz8374 3 ปีที่แล้ว +2

      No there is 3 types of windows new construction retrofits and block frame the window he got was the correct one all he had to do was cut the siding more so the fins would fit his installation was wrong but the way he did it it still works

  • @pksingh911
    @pksingh911 11 หลายเดือนก่อน +1

    So are you saying tbat all i need to do is remove the nail flange? Does that automatically make it a replacement window?

    • @SourcePortEntertainment
      @SourcePortEntertainment  11 หลายเดือนก่อน +1

      That is what I gleaned from window installers yes. Thanks for watching and commenting! Please Share and Subscribe.

  • @capttuttle2947
    @capttuttle2947 8 หลายเดือนก่อน +1

    NEVER use the 'regular' Great-Stuff expansion foam! Why? It will potentially cause the sides of the window frame to bow inwards, causing the window to be difficult or impossible to open/close.

    • @SourcePortEntertainment
      @SourcePortEntertainment  8 หลายเดือนก่อน

      Thanks for the tip and for commenting. Please share and subscribe!

  • @Lucas-pv2wn
    @Lucas-pv2wn 11 หลายเดือนก่อน +2

    Careful of using anything but the blue can of "windows and doors" spray foam. The other great stuff can actually move things out of place with expansion.

  • @LuisRamirez-iw2kj
    @LuisRamirez-iw2kj 3 ปีที่แล้ว +3

    Man you did a great job

  • @kimsallach7805
    @kimsallach7805 4 ปีที่แล้ว +5

    Working for a window company, we go to customers homes and have to replace lots of these DIY projects because they didnt do it right. Its not always the answer to cut off the nail Flange and install it still, now you just removed the proper way to install that specific window. There should never be screws in the bottom/sill of the window. Are you sure you didn't install it upside down? Lol. Oh boy...

    • @SourcePortEntertainment
      @SourcePortEntertainment  4 ปีที่แล้ว +3

      Thanks for taking the time to watch and comment. I just put the screws back in the same places that the contractor did years ago. It's all calked and sealed up tight so it should be good for many years.

    • @bedhead1903
      @bedhead1903 3 ปีที่แล้ว +2

      No one needs window installers anymore with TH-cam.

  • @sleewok
    @sleewok 2 ปีที่แล้ว +2

    Looks like you didn't flash the rough opening with rubber tape. I really hope you did!

    • @SourcePortEntertainment
      @SourcePortEntertainment  8 หลายเดือนก่อน

      I didn't remember to flash the rough opening with rubber tape. It is still holding strong with no leaks or damage, so far. What kind of rubber tape would you recommend?

    • @s.leegooding1827
      @s.leegooding1827 8 หลายเดือนก่อน +1

      You won't see it. The inside slowly rots as moisture builds up very time. There is nothing to keep the moisture away since you didn't flash it. You won't notice a problem for years most likely, but eventually you will. Or when you replace the window again you will have to replace the rough opening that rotted out. Any rubber flashing works. I prefer the flexible type.