Jeep Grand Cherokee Headlight Bulb Replacement - WK2
ฝัง
- เผยแพร่เมื่อ 3 ส.ค. 2024
- This is a how to and is the quickest and easiest way to change out the headlight bulbs on your Jeep Grand Cherokee, Works on WK2 Model Years 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Purchase LED Bulbs Here ► amzn.to/3tdNqmf
Visit Auxitos Website for LED bulbs and use my promo code for 12% off!
AUXITO Website ► auxito.com/?ref=KOT
PROMO CODE ► Kurt12
Commissions from sales financially support creators like myself, thank you! - ยานยนต์และพาหนะ
If you found this helpful consider sending me a Super Thanks with the icon below the video, ❤💰 I will buy a Coffee with it! ☕
Thank you
We absolutely could not have changed our Jeep headlights without this video!!!!! Thank you so much!😊
Thank you so much! This was incredibly helpful! I was able to successfully change the passenger headlight all thanks to your video! Ladies you got this!
It’s not that bad!
@@KurtofTrades Yes, IT IS. Jeep should fire their engineers that designed this.
I just changed my bulb!! Thank you so much. The video was absolutely perfect. The bulb cost 15.00 and I really did do it in just a few minutes. My husband was answering an email and I had it done before he even made it outside! Much appreciated,.
Being the least mechanically inclined person on TH-cam… I tried it and BOOM! Bulb changed. Discovered that on the 2021, the cap wasn’t a screw cap but more like a snap in place cover. If I can do it, anyone can. Thanks brother!
Great video! This lamp replacement is a real pain but your video made it a lot easier. Thank you!
This was sooooo helpful!! I was able to get my bulb replaced by myself today thanks to this video. Thank you thank you.
Just got it done thanks to you. Thanks for taking the time to post this.
I have relatively slim hands and was able to replace the lights without unscrewing a single part lol so not completely necessary but definitely is if you want more room to work with. Great vid man 🔥
Thank you! Nothing like doing a job blind and backwards. Your video helped make a difficult job easier.
Thank you very much. Followed your instructions and had it done in less than 15 minutes total.
Good video! Thank you for posting. And I agree with the others saying that changing these can be very challenging but your video helped a lot!
Thank you for this video man! Straight to the point and really clear I just changed
Both my bulbs and saved some money all thanks to you 🙏
It’s not too bad right
Took me about 30mins with nails, but this video helped out a tonnnnn. Thank you!
Thank you so much for posting this step by step video. It worked for me yesterday. Great video and the instructions were accurate.
Glad to help! They are accurate cause I’ve done it a few times haha
Thank you so much. It took me over 2 hrs the last time. 20 mins max this time, and that was with me stopping and talking to my neighbor.
It’s much easier the second time I agree! I’ve done both in under 5 min now
Thank you for this. Easiest headlight removal ever. Your video makes it so simple to understand
Glad to help!
Thank you very much! It took me about half an hour but we did it (My 14 yo daughter and me, the mommy). :) The guy at Advanced Auto Parts told me I had to take it to a professional. Hehe Thanks again!!!! Blessings!
Glad to help!
Thank you so much. This tutorial saved me time and money.
Changed it in less than 15 mins!!! Good looks!!!
I just changed my light… I’m really short 😂😂 so I had to put a chair so I could see what I was doing. Thank you so much for this video. With only one income right now I was able to do my part and help❤
Thanks buddy you saved me $300. Thanks a lot!! Very helpful video!
Thanks man! Just changed the bulb.
Man U made this video super easy I changed my bulb at night 😅 cause of da video ✌🏾
Great video! I tried to go through the fenders on my 2015 Overland, but my hands are too big. This way was easier for me! Thank you. Hey, if you ever flush your coolant, it would be great to see a how-to on that ! Just a thought…
Really helpful
Thank you 🙏🏼
Great video... thanks for your help.
Man you made this sound wayyyy easier than this is. You need micro hands to get in there. 2 hrs in still can’t get the new one in! Back to work.
It’s pretty easy if you’ve done it before, make sure you watch all the tips especially for the passenger side. Good luck
@@KurtofTrades Got it with 2 hrs of messing around. Just such a tight space. Fail to the Jeep engineers if you ask me! Your video was very helpful, was just way more challenging than expected! Passenger side is no fun at all.
Success for the engineering dept lol. They design new vehicles to be nearly impossible for the do it yourselfer. They don’t even have a dipstick for the tranny, they hope you’ll never service or check it so it’ll blow on you and you’ll buy a new vehicle that’s even harder to work on.
@brettsbits5379 I'm fucking stuck and ready to set it on fire. Almost at the 2 hr mark after a 10 hr day at work. What was the trick please! This video is doing nothing for me, respectfully
@@ticallianstallion9328 I feel your pain. It was a while ago already and I only remember it just taking forever and multiple attempts to manage to line up the bracket. I found the right angle to get my hand in and then just had to mess with it until it fit in perfectly. Check the grooves on the light and do your best to get it in by lining it up the best you can before going in. It will go, just takes time. I still can't believe how hard they made this. I also have small hands. If larger hands, it may be almost impossible.
Spot on buddy - thank you!
Glad to help!
BRO!! I almost let a reputable non-dealer Jeep shop change our bulbs last week for $300 (like u said) but I just could NOT fathom paying that!!
Why TF do they insist on removing the entire bumper cover???😤 I’ll be doing this job on Saturday, THANKS!!! ❤️🔥❤️🔥❤️🔥
Glad to help!
Able to change drivers side with your tips. I made a tool out of pvc pipe to get enough torque. I had to pull off the bumper and remove the headlight housing to change the passenger side.
Some models are harder with the reservoir tank in the way. Glad to help!
any tips on turning the gizmo hold the lamp, I've been trying longer than I should be to get it to turn. Any one else have an issue turning it.
FYI, if you have HID bulbs, they do not "twist out" there is a arm/tab/lever that you have to release, then the bulb pulls out straight, do not twist
Exactly this is a bad video
Mines as well
Thank God I found this comment, where is the lever?
@@andrewlion3361 did you find it?
This comment saved my weekend! Thank you!
NBEED HELP PLEASE. MY AIR FILTER BOX HAS THE 3 PINS AND ALSO A BOLT THATS BOLTED DOWN AND I CANT GET IT OFF
ALSO MY JEEP GRAND CHEROKEE LLAREDO
The key for the passenger side: go through the wheel well. Get a finger or two on the plug part of the bulb and pull down to TWIST THE BULB counter clockwise and it pops right out. This is the third video I’ve watched and no one has explained that critical step.
Did the auxito LEDs require a decoder?
Hi thanks for this. Will it work for the low beam that moves up and down?
It shouldn’t be any different as long as they are halogens. The hid beams are a little larger and have different connections but basically the same process to access them.
I couldn't change anything even with this tip.
FINNALY I managed to change those bulbs via factory opening in wheelwell but only with 3d printed custom wrench/adaptor.
So if you can't do that this way, try 3d printed wrench.
Thanks!
Hey Thanks! So glad I could help out! That means so much to me
Do you have a suggestion on what to do if the bulb will not come loose from the socket? I've used every bit of strength I have and it will not budge.
I find it best to go up through the wheel well to loosen the passenger side bulb, you can get a finger on it to loosen it, then take it out through the top
I have a 2018 grand Cherokee and the bulb doesn't just twist like normal. It appears to have some sort of locking ring around the bulb that's giving me fits, especially since my hands are large..
What do youmean pull it down to loosen it? Does it twist counterclockwise to remove? You have to pull then twist?
Twist counterclockwise to loosen yes
You can pull down on the bulb connector which will turn it counter clockwise
Don't wanna sound stupid, but my low beam went out. Are there a low and a high beam in the same housing? How would I know which one I'm removing?
High beams are closer to the center of the car lows are on the outside. Same housing I don’t think the hi beams have a cap covering them though can’t remember
Thanks for the tutorial! I had to replace the driver side lamp. Very little cussing! 20 minutes and only lost one grommet for the air cleaner box. 6 bucks at the dealer. I can’t wait for the passenger side to go! 🤪
Some people say it’s impossible, I say it’s more fun! Haha
Thank you
Glad im not the only one bleeding while trying to change this bulb out. lol. PITA! lol
Every single person tears up their knuckles 😂
Great video! My hands are jut too big. Damn!
I tried.... Would you mind flying to California and helping me? both bulbs are stuck and I can't get the leverage to loosen them. :-(
Try going through the wheel well on the passenger side. I’ve also heard people using an open end wrench on them. Not sure what size. Good luck!
I used a rag to get better leverage on the bulb housing to get it loose. Make sure you’re going counter clockwise (pushing down on it) to get it out.
So you do everything but change the light bulb, great.
It just unscrews the hard part is getting to it
👍
what are the bulb sizes?
H11 low and I thing 9005 for hi beams
Is there only one bulb for high and low beam?
2 separate bulbs, the hi beams are easier to access they are the inner bulbs
@@KurtofTrades
My hi Beam is not good is there a video how to change and what 💡 to use?
Thanks a lot
In the dealership now I ain’t about to do it myself 😂 also the way the set these cars up now is so dumb. The nicest and easiest ride at our house is a 2004 Silvarado. Just turn the latch and the whole headlight comes out in like 3secs😂
I can't seem to loosen the bulb from any angle my hands are too big, I think I'm going to have to loosen the bumper and get my hands in that way
Loosen it from the wheel well hole, you should be able to get a finger on it
It's Humiliating but I had to take it to a local shop because my hands were cut up and bleeding, I miss my WJ when all it took was an 8mm bolt and 3 pop clips. something is seriously wrong with engineers who designed this@@KurtofTrades
How tf did you get the light out though…my shit don’t turn at all and my hand sway too big
Bulb size??
Normal h11
Can anyone tell me the bulb #? Please??
H11 for low beams
Thanks but that passenger side is still a beast even with sliding the ECU out if I still have to go through that teeny little hole it doesn't really help
Agree completely glad I could help a little. Good luck
@@KurtofTrades you did. I was not at my best when I posted this. The bulb is replaced now thanks to you. I ended up doing everything from the top. I needed to walk away for 3 minutes and come back. Ridiculous design.
@@theniceneighbor I’m currently about to start this so I’m going in expecting to have to take a breather or two.
Helpful video but I would have loved if you actually would have moved the camera in a different position so we could see once you remove the airbox what everything looks like and what you're removing
Once the box is removed it’s very easy to see both bulbs, the low beam is the outside bulb, disconnect and twist counter clockwise to remove
What about the other side?
Which side? I show how to do both
i can barley get 3 fingers on the driver side bulb scared to pull it and not be able to get new one in 😂😂😂😂😂😂
You all must have really small hands because I can’t get in there with enough force to turn the bulb
I can only get a finger or two up on it to pull down, my whole hand won’t fit.
Your bleeding, I feel the struggle. lol
Tried this and my hands are just to big.
physically show me the passanger side light bulb because everyone who shows this way jist cuts to putting everything back in place
You can’t see it, it’s too tight to have the camera and your hand in there
Lame on the passenger side. Did not complete the change out.
Its NOT that easy trist me, spent 5 hours trying, getting those boxes out of the way is not hard, but the low beam is in a tube, this tibe has the bulb several inches inside this tube, i have normal size hands and i could not get my hand in deep enough to the bulb, almost need a little kid size hand, what he is showing is no way close to reality
If you can get the boxes out of the way it shouldn’t be hard to reach the bulb even with big hands. The passenger side is a lot more difficult for sure, but this is the easiest way
Man. Thats alot of plastic to come out. Id probably break half of it yanking on everything. Car is going to the dealer if a hl goes out. Lol
I just had to change mine and I cannot stress this next sentence with enough emotion to convey my feelings... "JEEP CAN GO TO HELL!" 😡 Who designs a headlight this? Grrrrr!!!!
They intentionally design vehicles likes this now hoping you'll just take it in and have mechanic fix /replace things instead of bring able to easily do it yourself.
There’s no way you actually changed the bulb on this vehicle. It’s one thing to demonstrate how it’s supposed to be done, it’s a whole other thing to actually do it. This is one of the worst designs to replace a simple part I have ever seen. And, I was in the middle of changing out my driver’s front fender so I had the wheel liner out and the air box. There is no way to get a man sized hand in the area provided while also being able to get enough torque to twist the bulb. You need Martian fingers to do this.
I’ve actually changed them this way like 6 times haha, I don’t have abnormally small hands. The best way to get the passenger side bulb loose is to reach up through the wheel well you can get a finger on it and loosen it, then go to the top to take it out. Once you do it a few times it’s not that bad. GL
Its like that so you say fuck this and take it to a dealership so they can charge you $300 to replace them
What a pain
Visit Auxitos Website for LED bulbs and use my promo code for 12% off! Or on Amazon here ►amzn.to/3tdNqmf
AUXITO Website ► auxito.com/?ref=KOT
PROMO CODE ► Kurt12
Discovered that if you have large hands
BS. It's not that quick and easy especially the low beam
It is! I can do it under 10mm
You're not going to change the "easy" side (the driver's side) in 10 minutes. Trust me.
Stupidest design ever! They either didn’t think this through when designing, or did it intentionally to try to get more people to bring them in for service. Either way, I will not purchase another Jeep product due to this insanity!
Most useless video regarding doing this job , it one video has actually shown it being done without cutting video.
You cannot see the bulb being removed with how little space there is.
Jeep why the hell did you do that
Thanks!
Thanks for the super!! Glad I could help!