Quick & Easy - Jeep D3S HID/Headlight Bulb Replacement
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- This is the best method I have found to replacing the HID's on a 2014 Jeep Grand Cherokee Summit without having to remove the bumper or pay a dealer hundreds of dollars.
Thank you, thank you the dealer wanted to charge me $450 to change his bulb. I search multiple videos and yours was the only one who told me about the tabs to move up and down on either side. I am a woman of 61 years old and I did it.
I'm a 37 yo male and can't fml
Yeah dealer be over charging. For one bulb $380 lol I click on them
Finally someone points out the tabs rotate and not the bulb. Thanks chum!
I spent an hour today and this is exactly what I was looking for. I could not get the passenger side bulb out and had to leave for work. One time the algorithm helped me out,
It took me 5 other videos and 30 minutes of bulb twisting to get here. Thanks Dillon.
Guys can you explain the tabs better. I was able to change the driver side with no issues. Its super easy to install it but for the life of me I cant get the passangers side bulb to rotate / engage. I am doing the same thing as with the driver seat
Eric came here to say the exact same thing
Amazing, than you for pointing out those tabs that aren't part of the bulbs. Checked out 5 other channels and none even mentioned. My Father in law also said thanks.
I appreciate the comment, glad it helped!
2014 GC Overland here, apparently these have HIDs as well, thank you so much for this video, best video online for sure🤝🏽
THANK YOU. As per all of the comments below, no one else tells you about the locking mechanism on the side of the light and not twisting the light itself!
Please explain the locking mechanism in another video.
Thanks for the info! I have a 2018 Limited with the Luxury Group II package with the OEM HIDs. Here is a summary of my experience.
Definitely remove the airbox and intake plenum for the drivers side, tons more room to work with. Twisting the locking collar around the bulb was tough but keep working at it and it will make sense. I removed the bulb with the electrical connector still on. Be careful when you twist/rotate the bulb out of the housing, go very slowly. There is enough length on the electrical connector wire to allow this method. Squeeze the end of the connector and pull to remove. Installation is reverse order.
The passenger side...I removed the ECU/bracket and moved it to the side. This gives you a little more room to get both hands in the tight spot in front of the fusebox and next to the coolant tank. I did the same method as the drivers side, removed the bulb still connected to the wire.
I replaced the factory Osram 66340HBI bulbs with the Osram 66340CBA (cool blue advance) bulbs. They are brighter and whiter than the HBIs...definite improvement. These are the same bulbs I had on a previous vehicle so I was familiar with them.
Hi can I ask where you got the bulbs from? I just had a whole ordeal . Buying two HID Xenon bulbs from Napa Auto Parts . They weren't blue or bright white at all. They were just yellow. Besides pay $144 each bulb. I paid $95 for someone to install them just to turn around , and return them. I just want the pretty blue lights. I have a 2014 Jeep Grand Cherokee .
Hey I am also curious to know what bulbs you got as a replacement (to get brighter) that fits our fancy HIDs? I find they are a bit too yellow and could be a bit stronger. Just got my Jeep a week ago so I'm learning about all of this now!
I have a 2015 Summit and there isn't enough length on the wire of the connector to change the bulb. I'm just trying to swap out for LED's and I'm scared to take the bulb off the plug.. Honestly I don't know if I can get the bulb off the plug without pulling the bumper cover. I'm trying to slide the old one back in and I can't get it to seat right. Its truly a PITA!
How did the leds look ( cutoff line and all)
I never would have figured out the tabs on my own. Glad I found this video before I damaged anything
Excellent video - the only one that mentions the rotation of the locking tab in the car, and not the bulb. Really helps when you're dealing with a spot that's really hard to reach and see. Really appreciated !!
These tabs don’t exist on my car and I can’t get my new light to fit in all the way
i have same problem, 2014 jeep cherokee limited, i cant find any sort of tabs that rotate. got the old one out (but i think i broke it doing so), but cant get the new one in and locked in position
The tabs / tangs should be one straight up and the other to the side - 90 degrees away from the top one - sorry, sitting now after having done it and the job itself meaning you're reaching blind and backwards I can't say where the side tangs are on each one - ie. which is 9 and which is three. THEY BOTH UNDO COUNTERCLOCKWISE AND LOCK CLOCKWISE - ie. 90 degree rotation.
The description of the "tabs" that must be semi-rotated to release the bulb assembly is huge! Saved me from buying another set of bulbs thinking one was bad after the passenger side didn't originally reseat correctly. Thanks about a $100 or so! FYI: This applies to any of the Grand Cherokees of the WK2 ilk with OEM HID.
This was an EXCELLENT instructional video! You managed to hit every detail. Those tabs though, what a pain
Best video for learning how to change the globe. Only video we found that says you have to rotate the tabs! Thank you 😊
Glad it helped Dawn! Thank you for the comment.
Thank You!! Great vid. My right headlight just died. With this tutorial I am going to change it myself instead of paying lots of money to the dealership.
Absolutely the best video on the web. Thanks so much for tje part about releasing and installing the bulb !!!!!
The best video I found!! Nice job man. I about torched the car in the process I was so frustrated!! Thank you Thank you!!
Thanks for the vid! The housing twisting and not the bulb assembly itself got me. Should've watched this before tearing my hands up trying to twist something that doesn't twist.
Thanks for the comment, happy it helped!
Thanks for the video. Helped me with my HID bulb replacement. On my 2014 Summit with Ecodiesel I had to remove two 10mm fasteners that hold the coolant reservoir in place. This allowed me to access the passenger side bulb. Still very tight, but enough room to get it done. I did not have to remove my ECU. My air filter housing was the same as yours. Thanks again.
Thank you! that was the most thorough explanation of the tabs i've seen.
Thank you for producing this video it was totally different doing one of these bulbs compared to other ones pull out and replace total time about one hour
Thank you, you saved me a ton of pain. Tabs rotate and not the bulb.
Thank You so much, i have changed them my self after watching tour vídeo, from San Miguel de Allende México !!!
You just saved me over $100, I knew nothing about the tabs holding the HID bulb. Ive been trying to force,twist, repeat for abOut 3 hours-will buy you a beer if you are ever in California
Glad it helped! Thanks for the comment.
Thanks this really helped, Yes the tab it turns about 1/4 turn up or down depending on side you feel it. You have to play with it a little as it might be a little tight. This tab is attached to the main light housing so it is just in front of the square housing on the bulb. It can be a little tricky getting the bulb back into the fixture. just have to line it up and play with it a little. Then it will seat and lock the tab once again. Saved alot of money for a little over an hour work.
This explanation has been the most helpful. Thank you!
Amazing vid!!! This helped alot....the switch inside was why i couldnt get it out.
Thank you very much, you saved me a lot of time and money!! How you explain the tabs is great!!
A lot of steps left unsaid but I was able to get it done. One thing I did extra was remove the fuse for the lightbulb so that it didn't shock me.
good stuff.. I appreciate the simplicity and great explanations.
Cant thank you enough for this .video. Helped me tremendously.
Very helpful tabs are very difficult to unbuckle. Had to make sure they were both secure on the top and bottom on both sides.
Thanks a lot you literally saved me $600!
Very useful, thanks. My 2011 UK model had a similar arrangement, but with a little lever to lift up and down to release or secure the bulb
NO NEED TO Disassemble Components , THERE IS ACCESS HOLE AT THE FRONT OF WHEEL WELL, YOU CAN REPLACE HID BULBS THRU THEM. Search TH-cam for right video, there are some.
That access hole is very small and difficult to maneuver in. I can’t see how I can get an HID in there (passenger side). My 2018 Trailhawk has a lot of cables bulging out when I open that access.
Spend most time installing aircleaner , there are these steel ribbons the case of the bulb goes in first , you have to position it perfectly to allow to insert and twist bulb . You should explain how to get the bulb line up perfectly .
Thanks man took me 20mins
Yup, did this myself with the help of this tutorial. Like others have said, those clips are a pain. In the end, apparently the HID D3S bulbs wasn't the culprit. I realized that the high beam "blue icon" on the dash didn't even come on so now I'm lost again. I checked all the fuses etc. but all seem ok. Anyone else out there had this issue with the high beam indicator not even coming on on the dash? Just happened absolutely sporadically and some items suggest the multi switch has gone bad but I don't even know where to start.
For others that had trouble finding the “tabs” locking mechanism, they’re attached to the car, not ON the bulb- felt that was a little unclear from this explanation. They’re about 1/2-1 inch each in diameter, so pretty noticeable if you feel around. You can see them a bit in this video- spent about an hour trying to feel for them until I saw this - then got it out easy. Good luck! th-cam.com/video/GoD8RA1tme4/w-d-xo.html
Great video. Helped a bunch but now my front turn signal doesn't work. Any ideas/suggestions how to replace that? Or does the entire lamp need to be replaced?
Anyone know which way the tabs lock in the bulb? I got the new bulb in place, but now can’t get it to lock in place. I’m not sure if I’m supposed to twist the tabs clock wise or counter clock wise. It might be possible that I damaged them a little bit. Twisting them clockwise seems to secure the bulb a little bit better than counterclockwise, but both ways I can still pull the bulb out. The light works. I’m just worried it’s going to vibrate out of position while driving. Thanks for the great video!
Seriously, death to whoever designed this headlight setup
Great video , thanks for sharing
The locking collars undo counterclockwise and do up clockwise - seems obvious I know, but in a car thats several years old the rotten things can be very stiff - and the headlight units are mirror image of each other so I ended up thinking maybe they lock/unlock accordingly - ie. one goes one way and the other goes the other way - but no, they both operate conventional way.
I purchases a set of underground lighting Ds3s which seem to be some of the best ones but they came out of the install very Dim! Extremely dim! The high beams really aren’t that much better! I have a 2014 summit. The pair of headlights I purchased before were dim as well! Any ideas on what could be causing this? I’d hate to have the dealer install and pay 1200🥲. Please help
I have never cussed a headlight out before. I guess there is a first time for everything.
This is an excellent video. ANYONE KNOW if this is the same on a '14 Jeep SRT with (steering) Adaptive Headlights? I assume there's an extra servo but not sure if the bulbs would be the same.
Very helpful thank you!
Can anyone give me pointers on the following. I’ve removed all the components on the driver side but the bulb is stuck
very detailed air box work but you did not remove the light
I really wish there was a better video on how to set in the bulbs. I have tried eveything to get them to clip into place but they just fall out. I can't see into the hole so I don't understand how the bulbs clip in. I can feel the metal clips but I am not sure how they work.
Did you ever figure this out? I am struggling a ton to get them back in place.
@@xXPrestianoXx11 was just doing mine last night twice bc I installed cheap aftermarket bulbs that ended up being worse. The small metal pieces form a square border around the headlight to hold it in place. I push in on the back of the headlight while rotating the plastic pieces to lock it in
I made the conversion to LED on a 2013 grand cherokke, they light up fine but after 10 seconds they turn off completely, can you help me?
And so the blinkers in the same spot or does it have screws
HEY. had to do this same thing. Nowy blinker went out on it. Please tell me you have a vid for front driver side blinker lol thanks. Without having to take the front clip and bumper off thanks
Did you get your blinker fixed? If so how'd you do it? Mine just went out also and can't seem to find anything anywhere on how to replace.
One of my bulbs went out. I read recommendations that you should change both so I did. Now, both bulbs are on, but my headlights are really dim and "dispersed" is the best word I can use to describe. And they're not any better when I turn on my brights, maybe even worse. It appears that the deflector that focuses the light and switches from dims to brights isn't work. My headlights don't do the autoleveling when you first start up the jeep. HELP!! Does anyone know if/how to reset the deflector? I have AlfaOBD if there is a way to troubleshoot and/or reset. Thanks, Craig
Thanks !! 😄
Guys can you explain the tabs better. I was able to change the driver side with no issues. Its super easy to install it but for the life of me I cant get the passangers side bulb to rotate / engage. I am doing the same thing as with the driver seat
Do you push both taps before taking out
The light strip that goes around the headlight has a section that blue on one of my lights. Any ideas as to how that happened or how to fix it?
Do you have to mess with the clips when putting in. ?
I have the same truck that you have did your lights go out or you just changing the light bulbs. My lights went out what you think that I am experiencing?
Not really easy but thanks for the video! Whoever designed this wasn’t thinking straight 🙄
Do you need to disconnect the battery first?
I did not, but always good practice to disconnect the battery.
Anyone know where to find the turn signal and daytime light bulb? Or are they all the same bulb?
Does anyone know if this would be the same on a 2017 jeep grand Cherokee summit. Also what is the exact bulb to buy? Just any DS3
Thank you
TY!!!!!
Could never fully understand instructional videos when everything is done off camera 😢
I agree. It would be nice to 'see' the light bulb actually being installed. The description is good, but without visuals, it is hard to follow.
Hi, what else did you changed in your Summit? I can say that I changed in mine 2015 Summit all the fluids, left control arm (driver side), power steering reservoir (by mistake I broke the mesh inside the reservoir while changing the fluid), next would be the radiator cap 😂 and a drive belt…(also rear left glass window which is laminated -our dog took care of it, then one call to insurance and service came to replace it for $250) glass from mopar service little over $500 would cost me. O and one more thing replaced is a seat belt buckle driver side, and oil, yes I do change the oil, engine oil😂 o and rotors plus brake pads😂 and filters😂that would be it, pretty long list at 107,000 miles😂
Soon I need to change the HID driver side🙂
One more thing, I did change a rear blinkers for LED, and planning to change reverse lights too🙂
Thanks for the video! Do you know what the difference is in the model you got from Amazon versus the original that's $150 per bulb? For such a drastic difference in price, I'm wondering what the downside is on the Amazon two pack.
Great question, my guess is Chinese knockoff vs Osram name brand. The Amazon pack has been great, bo problems to date and a great deal on comparison!
These bulbs can't be found for $40, never mine 2 of them and everyone buys from amazon .@@dillonpaulson7574
How the fuck do you turn the damn tab Idk if my hands are to big and I can’t get enough torque or what but shit I can’t find a tab to turn
Its definitely a PITA. You need to reach at least one finger in past the bulb, you will feel a distinct "tab" on both sides of the bulb. Think of a locking collar with two tabs sticking out, that's what you are feeling for. They are located at either 2 and 8 or 10 and 4 (clock reference). If you start on the high side tab, rotate it down. If you start on the low side tab, rotate it up. You are only rotating about a quarter turn to release the locking collar. I was able to get my hand/fingers inside by some miracle and rotate both at the same time on the drivers side. You can however rotate just one tab slowly and go back and fourth to each one separately. This is what I had to do on the passenger side. Good luck
@@radean9 When I am trying to put the new headlight in it doesn't seem to sit in all the way tight like the one I removed, It feels like it's lined up properly with the notches but when I go to turn it in tight it only turns maybe a 1/16th turn and seems like it's not fully seated in
@@radean9 also these tabs do not exist I don’t know why they aren’t shown in the video but they are nowhere to be seen on my car I have no goddamn clue how to get this light in
@@jonny5873 I assure you the tabs on the locking collar exist. How do you remove the D3S bulb in the first place??? When you press the new bulb into position, it wont actually fully fit into where the bulb housing. The metal tabs around the bulb housing squeeze the bulb when you turn the locking collar. What this video to understand the concept. I hope this helps. th-cam.com/video/zqbXjHz3Q8E/w-d-xo.html
@@radean9 The first bulb just came out normally I twisted left and then pulled it out, the 2nd one will go in and sounds like it’s locking in but only turns very slightly and it’s still loose
Thank You 🤝
Do you flip both tabs or just one?
When you only changed one light, was there a noticeable difference in color between the factory one and the new one? One of mine just went out
No, no difference in color but I went OEM the first time.
Can you link the knock-offs?
I’ve always found changing headlight bulbs is hit and miss some are simple to change.....while others are a nightmare 🤬
In the wk2 srt it is a frigging nightmare. I just spent over an hour cussing the engineers at jeep out. The bulb is a hundred dollars, long, skinny, and fragile. You have to blindly install that hundred dollar, let's not forget toxic if broken, bulb in a space not fit for the hands of a grown man. I didn't start soon enough and the sun went down. That coupled with the fact that it was my first time replacing the bulbs on this vehicle made for an interesting evening.
@@Kyle-xt8ip i was replaced both it didn’t take me no more than 40 minutes. But you’re right tough angles and it’s horrible on space clearance
Has anyone change the ballast mine burn out
Headlight is covered by a circle rubber cover?
Yes it is
Thank u so much
Hey man! Could you share the lamp model??
$30 on Amazon for a pack of two, here is the link: www.amazon.com/gp/aw/d/B07R1WT5XT/ref=ppx_yo_mob_b_track_package_o0_img?ie=UTF8&psc=1
@@dillonpaulson7574 What a crazy difference in price. Thanks for the link and the video.
2019 Jeep Cherokee OEM headlights anyone do a video on that?
It's so quick and easy, you weren't even able to do it on camera. Smh. It's not that quick nor easy. So how do you get the band back on, with the tabs.... ?
Do you have the Bi-Xenon light that turn with the steering wheel?
Yes, these turn when driving
$300.00 for a light bulb!
차를 개 줮같이 만들어서 리이트 전구 하나 교환하는데 미쳐버릴거 같다.
이게 뭐냐 진짜.
개짜증나네 그랜드체로크
Is there right and left bulb specific?
No, same bulb for each side