How to install the AAW Wiring Harness in my 1966 Mustang
ฝัง
- เผยแพร่เมื่อ 17 เม.ย. 2024
- Check out my new website for car parts and merch that I am selling - krusebuilt.com/
In this video I install the popular American Autowire Wiring Harness in my 1966 Fastback. I also purchased the AAW wire crimpers and I'm glad I did, it made the wiring job much easier.
American Autowire Wire Harness - Part number 510125 - Amazon Link: amzn.to/3JanSx6
American Autowire Crimpers - Part number 510587 - Amazon Link: amzn.to/3QfHkfR
Nylon Braided Wire Loom (various diameters) - Amazon Link: amzn.to/445b6tr
3/4" wide cloth tape (better than electrical tape) - Amazon Link: amzn.to/4aJvVwt
The car is a 1966 Mustang Fastback with a 347 Stroker and T5 transmission.
Shot with GoPro Hero 9 with the Media Mod, edited on Davinci Resolve 17.
Gear I use:
GoPro Hero 9 Black - amzn.to/3ZCTpP7
Media Mod for GoPro Hero 9 - amzn.to/3CPKOi2
Rode Wireless Go II mic kit - amzn.to/3iJrj4c
GoPro Hero 8 Black - amzn.to/3QLpj7V
Media Mod for GoPro Hero 8 - amzn.to/3ZCAeoA
GoPro Hero 5 Black - amzn.to/3XuKMUQ
GoPro Karma Gimbal for Hero 5 - amzn.to/3GIWa8P
Want to help support this channel, you can "buy me a coffee", check it out! www.buymeacoffee.com/krusebuilt
Credit for the music in the video:
::::::::::::::::::::
Epidemic Sound
Try it today! www.epidemicsound.com/referra...
::::::::::::::::::::
#krusebuilt
#kruseview
#Mustang
#1966
#fastback - ยานยนต์และพาหนะ
![fellow fellow - Proud [OFFICIAL MV]](http://i.ytimg.com/vi/9uZF7BlUQPE/mqdefault.jpg)
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 6](http://i.ytimg.com/vi/CVUx09Rx0-M/mqdefault.jpg)
Thanks for the video, you were right to go with the American Autowire kit, I used a Painless kit on a Dodge car that I had a few years ago and not nearly as good. Like a person commented on earlier, your next purchase should be fender covers!!! Watch out what you put on your fenders and don't lean up against the car with your jeans on..., that is some nice paint.
Yeah, the AAW kit was fantastic.
I don't care about the paint as much as others do. :)
In Houston we have summer projects, don't wanna be in a hot car in 106 degree heat with 90% humidity haha. Problem is the garage is even hotter.
We get those same temps and same garage problems where I'm at, but coupled with frigid, bone chilling temps in the winter. So really there's only about 4-5 months of manageable weather, gotta get it all done in that small window. :)
@@AndyKruseChannel I put my new 320hp 302 in today, it was only in the 80s but it felt like 100 with all the humidity. Gunna be a rough year.
Really helpful. You are the man Andy!
I appreciate that!
Thanks for this video Andy, interesting and enjoyable
Glad you enjoyed it. :)
Thank you for posting this. I am about to start my install with this kit tomorrow
You've got this! :)
Awesome Andy!! Another huge milestone checked off to get it closer to enjoying it again.
😁
I've used American Autowire for my two cars, great kits!!
Great kit, I'd do another one if I had to. :)
Great video! And great timing! My son and I are getting ready to do his 65 coupe. Already have the kit. Now thinking about the crimpers. Thank you!
Good luck, you’ve got this!! 😁
Looking good brother👍🏾
Thanks!
This is exactly what I’m doing now. Actually I’ve been doing it for a while. 😊
Look forward to see how you tackle it.
Hope you enjoy it!
Thanks I was going to go with the pain less but now i have changed my mind. My next project after the headliner.
I was very happy how it turned out, those instructions are nearly the best part of kit. :)
excellent video Andy, glad to see more on the mustang, keep them coming✌
Thanks, will do!
Nice work! That different style loom is the way to go! Glad you went with A.A! To me the harness in the mustang was easier compared to the harness I did in my 75 F250!
Thanks! 😊
I installed a firewall forward harness during my 2019 resto of my 66 2+2. I made it look good but like you.....not wild in hiding wires. thx
Sometimes the juice is not worth the squeeze. :)
Good wrk 👍
Thanks! 🙂
Doing the harness after paint work is great. Both times I've had cars bare metal repainted they've come back with an assortment of electrical gremlins
Yeah, it seemed like the best time to take this opportunity. :)
I’ll go with this kit when I re-wire my f100. Looks pretty simple.
I think the higher cost is worth it, especially for their included wiring instructions. :)
I went with the Painless for my 66 Bronco build which is waiting for the body shop. Now I kinda have buyer’s remorse after talking to others that have installed both Painless and AAW. They say the AAW is more complete and has much better instruction and diagrams. You’ve done a great job on routing your harness, it’s almost invisible!
Thanks!
Your next project can use an AAW kit. :)
I used the AAW 1970 update kit wiring harness in mine. Best upgrade you can do. Buying the crimping tools made for their terminals makes things a lot easier/faster.
Agreed. :)
Picked up the same for our 67 for the exact same reason. Too many hands have been in this car over the past (nearly) 60 years. Single wire alternator, no more voltage regulator, easier to run 12v to a pertronix, MSD, or HEI coil, extra relays, room to add more restomod goodies down the road. It's an upgrade all around.
Yeah, this kit is tough to beat. Good luck with your project!
Andy ik zeg het nog maar een keer je kleur keuze gewoon geweldig
Thank you, I appreciate that! :)
I did AAW on my 72. Definitely worth it. For the extra cost they give you a lot extra that others don’t. You pretty much need the double wire crimp tool. I got both, but there were better single wire crimpers.
I could have gotten by without the larger of the two crimpers, but here we are. :)
Looking good! The real test will be when you put power to it to make sure nothing got crossed…ask me how I know 😂
How do you know? :)
Just used the same kit on my 65 about 6 months ago? My back still hurts! 😂
Yeah, but the kit went it great and everything works, right?! :)
@@AndyKruseChannel yes, it everything works great, it’s expandable, and it’s great piece-of-mind knowing its new wire. FYI - I installed a Vintage Air HVAC system in my car when I rewired it. Really nice system. I would definitely recommend it.
I used the painless (10123) on my 67. The first thing I did was throw away the vinyl terminal kit that came with it and used heat shrink terminals instead. The worst thing that can happen is a terminal coming off of a wire and starting a fire. Take your time installing the kit and use a good braided wire loom for running your wires.
Good advice.
bros in my head.just started this the other day
Hopefully there's a nugget of helpful info in this video for you. :)
Andy I have this same AAW kit as well and wanted to pay someone to install, now from this video I might want to take on this task. I’d be interested in your AAW crimpers to buy or rent. I also would like to see your electrical fan/separate circuit installation video. Would be very helpful. Great video.
I'm not wild about renting out my tools, and for now I plan to keep them.
I have a few videos on the wiring and install of an electric fan, it's more or less the same. Using a temp switch in the thermostat housing to be the "ground" when a specific temp is reached, which completes the circuit in my relay, and powers the fan(s). In my most recent wiring of the fans, I had a single large fuse in front of the two fans, but I rewired it so each fan has their own fuse, nothing fancy. :)
@@AndyKruseChannel OK thank you. Let me know if you change your mind and decide to sell them. 😊
You might want to save your old harness. I'm putting in Dakota gauges. I think I can salvage color coded wiring to make connections with the Dakota module which would otherwise get confusing if trying this with one color from a spool. Plus, some of the connectors are unique. The ign switch connector, in particular. With my new harness, plugging it in was fussy. It works, but I wonder if one of the spades went in above or below its mate.
Thanks for the heads up.
You’ll be happy with this kit! Nice job, where did you source the headlight connectors? Cant say I’ve seen them with the wire coming out the side.
That was on the car already, I'm I saved them from the old wiring harness, the fit is so much better. :)
Did you video the process of drilling the holes in the wiper motor bracket and mounting the relay block?
No, partially because it's hard to get a camera in there and drill the holes. It was easier than drilling the holes for the main fuse panel. :)
Check out cobra automotive Andy, you should get the black head light covers for your headlight it would look cool. Or maybe the yellow ones and the deep wheel lug nuts they sell.
Don't tempt me! :)
Andy thx for the video! REALLY good..I'm doing the AAW kit in my car as well..... my challenge is my car is a shell...and I'm putting it together without an original or even good pics....like doing a puzzle without the picture on the box. .. Curious how your loom running is going..didn't see that in the vid. ..were the wires all long enough when you ran them in the fenders or did you have to modify?
I had more than enough loom, by like triple. I didn't even use the large diameter stuff.
The wire length is perfect for all of the circuits, you do not need to worry about making things fit because a wire was too short, or something like that, you'll have plenty.
The AAW instruction book does a great job outlining where everything goes, even for the more novice hobby people. :)
@@AndyKruseChannel cool thx!...great to hear. For a Canadian the AAW kit is over a grand and was hoping they weren't skimping on length (extended wires are problematic when shooting an issue a few years later)
Nice. Must have been a long video to edit being 40 minutes! The best time to do wiring is when the engine and interior are out. Definitely making great progress on it!
I trimmed a lot, despite not wanting it to be as long as it is. :)
Thanks for the video.
The Amazon link you have for this harness is about $200 cheaper than the list price at the AAW website? Do you know why? I want this harness and would love a $200 discount, but not if there is a chance something could be defective. What do you think?
AAW prefers to sell their products through vendors. The price on the AAW site is the suggested retail price. Vendors normally sell it at the suggested price, but they also offer sales and discounts from time to time. $200 is better than what I paid for it, grab it!!
The important thing is making sure it's new (which it is) and the correct part number for the car you have. The 510125 is the correct part number for the 1964-1966 Mustang. :)
Awesome video. I’m about to start this process on my 65. Are you willing to sell or loan your crimp tools? Thanks.
Cool, good luck with the wiring project, you've got this!
No, I do not plan to sell or loan my tools.
Can i make a suggestion? You said you have new carpet. Before you put your new carpet in, go to Lowes, and pick up 3 rolls of Frost King furnace duct insulation. You can put it down on the floor for a sounds deadener, and it will deflect heat from the exhause. You can buy Dynomat, but Frost King does the exact same thi g, at a fraction of the cost. Ive used it for years on my builds. Just a suggestion. You can thank me later.
Too late. :)
@@AndyKruseChannel figures. Well, remember that when you get ready to do the truck. It makes a HUGE difference in keeping the road sound out for sure. And the heat will be lower so you don't feel like your in a microwave in the summer.
Get some high density foam to lay on... especially over the rocker.
Nah, scratches add character. :)
I think I’ll need to do this to my 66 coupe project. Wiring is suspect
It's easier than I thought it would be. :)
@@AndyKruseChannel I have a lot to do on the project but I think wiring needs to be a priority. You forget it’s nearly 60 years old…I hate electrics so it’s reassuring to know it was quite straightforward. Thanks Andy
Looks like the manual is a lot nicer than my painless mustang harness.
Life changing. :)
Could I buy that carpet from you Andy?
Not sure what I'm going to do with it yet. :)
Get that box off your new paint job!!!
Nah, you and I have different expectations of the paint on my car. :)
First off.....i see you kicked the wife out of the garage to make room for the real vehicles. Lol. Just for conversation sake......why did you pick the fastback over the coupe? Not necessarily the coupe you had, but just a coupe in general. I have both 67 fastback and a few coupes. I personally prefer the coupe over the fastback. But won't ever get rid of the fastback. Lol. Just curious.
The 65-66 Fastback is one of my favorite cars.
Before you do the new carpet you should paint, seam seal and maybe put in some sound deadening on the floors.
Too late. :)
@@AndyKruseChannel oh I see! Well maybe in the future, there's always something else you can do to help preserve and improve the car.
Psssh. All of that just adds weight.