Hearing Bucking starting this "modern saw" reminded me of my parents when they started using a modern smartphone😂 Love your videos and kind nature, keep those vids coming. Thank you so much for sharing all these information and yourself
No matter what you run Buckin your a very humble PRO and with practice may I acquire a 10th of your skill,kindness and humility!! And to the Army of Kindness always remember our AXE OF KINDNESS!!
My grandpa was an old school timber-framer. He started as an apprentice in 1910. When I got home at nights he would put all his axes and hatches head-down in a bucket of linseed oil mixed with a little kerosene. The liquid mix was just deep enough to cover the wood exposed at the top maybe two inches deep. The end grain wold soak that stuff and swell the wood to keep his heads tight thru a week of tough work.
you are an amazing guy. you always make me feel loved. bud and I want to thank you personally for that. love your videos bud. and I want to say thanks also to your whole family
Buckin’, another great video as usual. You’re the freakin man!!! All Stihl equipment has the same starting sequence. Not sure about the newer M-Tronic stuff, but all of the pre M-Tronic stuff is throttle in, choke all the way down, pull till it pops, one click up, pull till it starts, blip the throttle! I’m a husky man myself but my dad is a stihl guy and I grew up running the legendary 041 Farmboss and the MS290 Farmboss. Great saws for firewood and light felling. In my humble weekend warrior opinion, the 372xp is arguably the best chainsaw man has ever devised!!! Peace and love brother!!!
tim smith the m tronic is even easier. I have one all you do is full throttle and push down locking on the choke/ high idle and keep pulling till it starts. Then let warm up and blip the throttle. Also the m tronics have the auto returning stop button so no more starting when the saws in stop.
That is thee freakin coolest floor covering in front of a wood stove in a Woodman's bunker possible! Smoking idea Mr Buckin! You need an axehead gong added go your drum kit.
I can smell the sawdust through my smellphone ! That’s a great little saw , man , it just starts and runs and cuts and isn’t fussy , won’t foul and isn’t needy - Love your videos, and your great attitude and respect the journey brother -
😁❤ hello from VT Buckin! Peace and love to you and to the Buckin army. Welcome to all the newcomers. You have found a sanctuary of kindness. And awesome content!
Great video buckin as always. As much as I love my Huskies, that ms261 is by far the best 50cc Saw around in my opinion. a lot more power than you would expect from a 50cc saw, and light enough where you can run it all day and not get worn out
@@nickl2268 Depends if its muffler modded/ported etc. If it is, it can handle 24 in hardwood, even 28 but the oiler isn't enough for that length. EPA really screwed the potential of modern saws sadly, kind of nuts to think that a 50cc modded saw cuts like a 70cc stock saw. Amazing machines.
Just ran across your video this morning. Had to subscribe. It's rare but anyone who "feels" the beauty of a Quality handmade tool with this much enthusiasm automatically gets my vote! I purchased a Stihl 261 several weeks ago but haven't had a chance to use it. I did not get the Mtronic. In this area most seasoned professionals would rather adjust the carburetor on the fly as opposed to dropping it off at a dealership so they can hook it to a computer for diagnosing.
Morning Buckin. You’ve probably figured it out by now. The Stihl M-Tronic saws are auto-tuning. The operation switch, has only three positions. For a cold start, you depress the trigger and put the switch in the bottom position, this is the start position. It’ll auto choke itself to start. Let it run a little, then press the trigger and the switch will move to the run position. Push up to shut off. Dunno why some people seem to dislike these saws so much, probably an issue to change... The one I purchased Xmas before last, has been working just great for me so far (ms362rcm). I kinda like the Stihl saws myself, and figure if I purchase another, I’ll wait for the ms500i to be released here in the states. All the videos I’ve watched on it so far, it seems pretty awesome...
because the Mtronics can run lean and blow up if you dont take care of them that is (clogged air filter) why we didnt grab a MS461 for slabbing and went Husqy 395XP instead - the local stihl dealer wanted me to pick up a 880 but i couldn't afford a divorce :P eventually we will get the saw ported and tuned for longevity my saw will run a a 56" chain with aux oiler ... they use the big 880 stihls at the pallet factories in town here..... that is a testimony Blessings and aloha T
I have one. Fallen in love with it. After using 460 all my life I'm like why?! Haha. I run an 18" on it and it rocks. Amazing to see your tuned one though, like wow! Ha I would never choose to log, ring or buck a log that size with mine. Mine is just a great little felling, limbing and firewood chunking saw on 18" or less. I do Bury its bar sometimes of course. 😉
Now we are talking. I just bought a Stihl MS-261-CM Great saw. Glad to see you showing some love to a Stihl. They are very popular here in Ohio. Happy New Year to the Buckin Army and the new subscribers.
So that's where my saw went. I got mine June 19 and love it. Have a torn rotator cuff and with the decompression valve I can pull the cord without pain
On stihl chainsaw you pull trigger to wide open postion push choke lever all the way down, pull starter cord till saw tries to start , then push choke lever up one notch pull till saw cranks up . Let saw warm up then good to go .
I LOVE SEEING YOUR NAME , I THINK ITS BECAUSE YOU CAME IN GANGBUSTERS AND ARE STILL HERE IN SUPPORT , I WOOD LOVE TO MEET YOU AT BUCKIN'STOCK IF IT WORKED FOR YOU ,,,,,,LOVE.....
Buckin' Billy Ray Smith I’m always here and try watch all the videos. No guarantees on Buckinstock, but I’d like to get down there if possible. Keep up the great message my friend Chris
I love that saw too. It is very light and quite powerful with a 20" bar. I had a McCullough Titan 50 that was a great saw with more grunt and a 3/8" chain but the ms261c has been a very good and reliable saw. I'm now working on a Mac 3-10 with electric start that I found. It's in great shape but has electrical problems. I'm really looking forward to getting it going, it's a neat saw.
@@rodavision A friend of mine just picked up a 5-10 a couple weeks ago at an old repair shop in town where im from. I had no idea until I saw the thing in person that it existed. So cool...keep us up to date on your progress with it !! 👍
@@famasmaster2000 I'll try but it's going slow so far. I have to admit I really know nothing about how the electric start works so I'm trying to figure it out as I go and then trying to figure out what's not the way it should be. A pull start saw is sure simple in comparison. I wish I had a repair manual to reference.
I've taken to doing the "sho sugi" thing to all my wood handled tools. Helps keep them from rotting and I just like the look. On the job sight, I never have to look at an axe across the job and wonder if it is mine or not. You talked about burning the end there with your dull sand paper. same principle I think to seal up the grain. I just do it to the whole handle.
NICE axe Bill ,dead nuts. Never had a pleasure axe myself. Seems to be alot of mass production regional axes on the web these days. Good to see quality tool steel made on this side of the pond.
Like always nice video and what a beauty throwing axe 😍 On the new Stihl there is a button on the top it’s for compression I guess and then it’s starts easily to start you can push it a couple of times Greetings from Hamburg Germany
@@skycorrigan6511 Get the 261cm, easier maintenance overall and more metal while 1 lb lighter than the 550xp mk2. Empty power head on my scale is 4.9kg on the 261, 6.5kg with 16 inch 325 and oil/fuel tanks full. It's light in the hand for limbing too but it packs a punch, I'm glad I got it over 241, a friend has it and its 6.1kg fully stacked, so 1lb less, but its 3.1hp while 261 is 4.1. I believe 550xp comes close to 7kg with a 16 inch bar and all tanks full.
Greetings, Bill. I see that you modified the muffler. The truth is that the new stihls are cutting edge technology but they are very restricted and must be rectified, the improvement will be noticed. There is nothing like the old school: robustness, simplicity and reliability. like a 034 av super talking about stihls and in its category. a hug
IVAN Yes Yes & Yes IVAN I couldn't agree more all this modern technology power to weight plastic ratio gizmo is just not my bag buddy I'm glad someone else agrees 💪❤️👍
Hey Buckin, just subscribed to your fantastic channel, big hello to all your army of fans, you’ve certainly kept me fully Entertained over Christmas break watching all your different stuff, so a big thank you, I’ve been encouraged through Your teaching to throw away that Freakin hand file guide and getting that Gullet, my chains are now much sharper As my technic improves, Cheers fella.
Scanvgt Holt, Welcome to the family, my friend. Glad you popped in to the comment section. Ole Buckin' sure does put out awesome video's. His love for his craft is obvious and his positivity is contagious. Mr. Rubish is quite right, go back to the beginning and see how BBR started his journey in creating this place we all love. Blessings to you and your.
@@BuckinBillyRaySmith yes lol will do cheers mate hope you and the family had a great Christmas and happy new year let's hope you reach the big 100k this year fella. Glad your doing well mate 👍
Welcome new subscribers, and a happy new year to you all, to a other safe and better to us all. Thanks for all the good vibes and info, also careful love from you all, most of all thanks to you buckin and be kind to all walks of life.
I swear every time you have a stihl I. Your hands I have to do a double take😂 little fella was a ripper I’d sa👌 I would be very surprised if there is anyone here who doesn’t feel the love! I’ve said it once and I’ll say it again...they broke the mold after you buddy. Love to you and the family❤️
They're both equally great, that 260 will do you good for decades to come if you take care of it and don't cheap out on gas and oil. I have a 261, 2020 edition but with a normal carburetor. It's a killer. Ran about 12 gas tanks through it so far and it's finally coming to life in it's final form power wise. I'll probably muffler mod it/remove limiters once out of the 2 year warranty. Can't wait!
My absolute go to saw outside of my day job is the little Husqvarna 550xp with a .325 20" and as long as you take good care of the chain it will pull a 20" all day. To many people say the 50cc saws can't do it but set the depth gauges right and put a good edge on it and you are good to go. I am even milling 17" shell bark hickory with the 550 sharpened at 10* semi chisle and it's doing alright. With that said I can't begin to explain what I would guve for a good splitting axe and a good 70+cc saw right now. Besides money cuz I just don't have that.
I normally press the throttle while engaging chock,let go and pull cord so it turns a bit. I then move it too fast idle(press throttle and it will jump out of choke) and pull cord and engine starts flawless everytime. Good saws.
The Walker's never leave a doubt if it cut's it can cut better, a trademark to live by for sure..Friend's have a great day and leave a smile wherever you go..Take care out there and will see ya right here the next time, Share your heart friend's there's alway's someone that can be uplifted..Love to you all..
I wanna see the one of your old Mac’s go against the little Stihl in a cutting contest! It’d be neat to see how they compare, love the Monkey Beaver shirt as well! Your enthusiasm is so addicting!
Spent a fair bit of time on a 261 and when they’re working they are great saw for coppice cutting but they have a notorious problem with clutch bearing failure and if ya don’t catch it straight away then the bearing eats the end of the crank which once it’s out of warranty will most likely write off the saw
I finally see you run a Stihl besides your toppin saw! I cut a lot of wood with an 044 Magnum trying to keep hours off my SP81. Great saw til it finally let go. I sent you another GoPro today, so keep an eye out for it. Use it up!
I have a classic 1998 model 261--from Husqvarna! Looks nice and comfy in the Bunker with the stove and Scooby fan going. I always imagine postal workers the world over marveling at the duct taped axes, LOL.
Man I got a little 261 I've had for 3 years now all I do is beat the crap out of that thing dropping out of trees getting run over by the machine but she just sluffs it off and keeps on kicking
Thank you sir. I have actually bought those exact wedges, but they don't have the sharp steps on the outside like the ones Buckin shows here in the video. Appreciate the help though.
Great job in building the axes. Bucken, I would live to see the saw that is up on the wall near the roof jack for the wood stove go rhrew some wood. Can ya? Never seen one of them cut Love ya from Maine
I haven't seen our lovely Ambassador Cynthia. Hope everything is well with her . We all send love and best wishes to her. One of the original true blues
![[TH] VCT Pacific Stage 2 - Playoffs Day 3 // DRX vs GEN | PRX vs TLN](http://i.ytimg.com/vi/CWM1Q-2-o3M/mqdefault.jpg)
Hearing Bucking starting this "modern saw" reminded me of my parents when they started using a modern smartphone😂
Love your videos and kind nature, keep those vids coming. Thank you so much for sharing all these information and yourself
No matter what you run Buckin your a very humble PRO and with practice may I acquire a 10th of your skill,kindness and humility!! And to the Army of Kindness always remember our AXE OF KINDNESS!!
STIHL💪 im glad to hear that you like it i love my little stihl ms180 with ported muffler and 16inch bar
I love my little 025!
That would probably be Hogans favorite saw!!!!! I 've got 4 of them! Small nice saws! Take Care & Stay Safe.
that 261 is NICE!!! I've got a 260... LOVE IT!!!! Have a Buckin Good Time BILLY Thank you for taking all of us along with your journey!!!
My grandpa was an old school timber-framer. He started as an apprentice in 1910. When I got home at nights he would put all his axes and hatches head-down in a bucket of linseed oil mixed with a little kerosene. The liquid mix was just deep enough to cover the wood exposed at the top maybe two inches deep. The end grain wold soak that stuff and swell the wood to keep his heads tight thru a week of tough work.
Looks great mr Billy !!! Learning a lot thank you. Spreading the love be KIND!!!!!!!!
you are an amazing guy. you always make me feel loved. bud and I want to thank you personally for that. love your videos bud. and I want to say thanks also to your whole family
Great to see how happy you are with your saws and axes!! Truly blessed!
Love my ms261 it’s perfect for what I do .
Buckin’, another great video as usual. You’re the freakin man!!! All Stihl equipment has the same starting sequence. Not sure about the newer M-Tronic stuff, but all of the pre M-Tronic stuff is throttle in, choke all the way down, pull till it pops, one click up, pull till it starts, blip the throttle! I’m a husky man myself but my dad is a stihl guy and I grew up running the legendary 041 Farmboss and the MS290 Farmboss. Great saws for firewood and light felling. In my humble weekend warrior opinion, the 372xp is arguably the best chainsaw man has ever devised!!! Peace and love brother!!!
tim smith the m tronic is even easier. I have one all you do is full throttle and push down locking on the choke/ high idle and keep pulling till it starts. Then let warm up and blip the throttle. Also the m tronics have the auto returning stop button so no more starting when the saws in stop.
@@FishFind3000 I really like the new style. When it's warm just grab it, give one pull and then start cutting.
All your videos are awesome!
THX
This guy is something special... God bless You, B-BRS! 🌲🪓🙏🏼
That is thee freakin coolest floor covering in front of a wood stove in a Woodman's bunker possible! Smoking idea Mr Buckin!
You need an axehead gong added go your drum kit.
IT SAT IN THE YARD FOR YEARS THX
Nothing more exciting than seeing a man who loves what he does.👍😃l
Gorgeous axes Buckin...Be careful out there...God Bless all
THAN YOU JOHN
I can smell the sawdust through my smellphone !
That’s a great little saw , man , it just starts and runs and cuts and isn’t fussy , won’t foul and isn’t needy -
Love your videos, and your great attitude and respect the journey brother -
I have a ms 260, great saw! Hello from Oregon! 👍
I LOVE that throwing axe.The style the look all of it.Beautiful
Great axes is always bucking beautiful work
😁❤ hello from VT Buckin! Peace and love to you and to the Buckin army. Welcome to all the newcomers. You have found a sanctuary of kindness. And awesome content!
You’re axe builds are insane! Not to mention the functionality of them. Welcome new folks!
Great video buckin as always. As much as I love my Huskies, that ms261 is by far the best 50cc Saw around in my opinion. a lot more power than you would expect from a 50cc saw, and light enough where you can run it all day and not get worn out
You need to try a ported 346xp then. 😁
I have a 260 and a 357xp I would take the extra 7 ccs any day about the same weight.
I have that same saw with 20" bar and love it! Great little saw! I really enjoy your videos! Keep up the great work!
it runs alot better with a 18", 20 is really pushing it on that saw
@@nickl2268 Depends if its muffler modded/ported etc. If it is, it can handle 24 in hardwood, even 28 but the oiler isn't enough for that length. EPA really screwed the potential of modern saws sadly, kind of nuts to think that a 50cc modded saw cuts like a 70cc stock saw. Amazing machines.
The wholesomeness of this channel is heartwarming
To the army let’s get the 👍🏻 and have a great day. Good video buckin!!!
Just ran across your video this morning.
Had to subscribe.
It's rare but anyone who "feels" the beauty of a Quality handmade tool with this much enthusiasm automatically gets my vote!
I purchased a Stihl 261 several weeks ago but haven't had a chance to use it. I did not get the Mtronic. In this area most seasoned professionals would rather adjust the carburetor on the fly as opposed to dropping it off at a dealership so they can hook it to a computer for diagnosing.
Morning Buckin. You’ve probably figured it out by now. The Stihl M-Tronic saws are auto-tuning. The operation switch, has only three positions. For a cold start, you depress the trigger and put the switch in the bottom position, this is the start position. It’ll auto choke itself to start. Let it run a little, then press the trigger and the switch will move to the run position. Push up to shut off. Dunno why some people seem to dislike these saws so much, probably an issue to change... The one I purchased Xmas before last, has been working just great for me so far (ms362rcm). I kinda like the Stihl saws myself, and figure if I purchase another, I’ll wait for the ms500i to be released here in the states. All the videos I’ve watched on it so far, it seems pretty awesome...
because the Mtronics can run lean and blow up if you dont take care of them that is (clogged air filter) why we didnt grab a MS461 for slabbing and went Husqy 395XP instead - the local stihl dealer wanted me to pick up a 880 but i couldn't afford a divorce :P eventually we will get the saw ported and tuned for longevity my saw will run a a 56" chain with aux oiler ... they use the big 880 stihls at the pallet factories in town here..... that is a testimony Blessings and aloha T
Nolan and I love the video!!! Hope everyone is doing great!! Love ya all!!
I have one. Fallen in love with it. After using 460 all my life I'm like why?! Haha. I run an 18" on it and it rocks.
Amazing to see your tuned one though, like wow! Ha I would never choose to log, ring or buck a log that size with mine. Mine is just a great little felling, limbing and firewood chunking saw on 18" or less. I do Bury its bar sometimes of course. 😉
now you have a lovely saw buckin .stihl saws the best
careful now! :) love and aloha
Now we are talking. I just bought a Stihl MS-261-CM Great saw. Glad to see you showing some love to a Stihl. They are very popular here in Ohio. Happy New Year to the Buckin Army and the new subscribers.
All that axe goodness, love it.
Happy New Year Buckin. Lovin my new Michigan Axe. Thanks for sharing
HOPE IT GIVES YEAR OF PLEAURE AND HELPS WITH SPIRITUAL , MENTAL AND PHYSICAL WELL BEING
Brilliant video!
So that's where my saw went. I got mine June 19 and love it. Have a torn rotator cuff and with the decompression valve I can pull the cord without pain
I'm the same, had two operations to fix it and can start the ms 390 and 461 no problem with the decompression system. Peace
On stihl chainsaw you pull trigger to wide open postion push choke lever all the way down, pull starter cord till saw tries to start , then push choke lever up one notch pull till saw cranks up . Let saw warm up then good to go .
My first saw was a mac! my second was an 026 pro, stihl around hehe that 261 is the new incarnation and man does it rip! Be Well Buckin' and All
Love my stihl saws got a ms250 and the good ol ms362
Beautiful axe the sound quality metal makes ❤️
Another truly beautiful axe Buckin.
At my job we have all stihl saws. And the 261 is a bad ass little saw.
Love your videos. Keep on making them
THX GOOD SIR
That stihl is #bucknasty !! Keep up the rad content and positive awesomeness !!! And that axe was diabolical!!
Thanks for that buckin I run a 261 back here in the uk and can see now that I need to port my saw, she’s a lil ripper!
Buckin... once again, I love the intro! The saw room is mint!
Keep up the good work buddy. 👍 up from Michigan.
I LOVE SEEING YOUR NAME , I THINK ITS BECAUSE YOU CAME IN GANGBUSTERS AND ARE STILL HERE IN SUPPORT , I WOOD LOVE TO MEET YOU AT BUCKIN'STOCK IF IT WORKED FOR YOU ,,,,,,LOVE.....
Buckin' Billy Ray Smith I’m always here and try watch all the videos. No guarantees on Buckinstock, but I’d like to get down there if possible. Keep up the great message my friend
Chris
Were in the 49423 Holland Brother ;) blessings and aloha
T D same to you.
I love that 261
Entry level forrestry model. Beauty job on that. She cuts really nice !
Love to all 💖💖
🇨🇦
I love that saw too. It is very light and quite powerful with a 20" bar. I had a McCullough Titan 50 that was a great saw with more grunt and a 3/8" chain but the ms261c has been a very good and reliable saw. I'm now working on a Mac 3-10 with electric start that I found. It's in great shape but has electrical problems. I'm really looking forward to getting it going, it's a neat saw.
@@rodavision A friend of mine just picked up a 5-10 a couple weeks ago at an old repair shop in town where im from. I had no idea until I saw the thing in person that it existed. So cool...keep us up to date on your progress with it !! 👍
@@famasmaster2000 I'll try but it's going slow so far. I have to admit I really know nothing about how the electric start works so I'm trying to figure it out as I go and then trying to figure out what's not the way it should be. A pull start saw is sure simple in comparison. I wish I had a repair manual to reference.
Love the look of the axes
Nice axes bud... great to see ya in the bunker again doing what you do :) Be kind peeps, all the best to ya :)
I've taken to doing the "sho sugi" thing to all my wood handled tools. Helps keep them from rotting and I just like the look. On the job sight, I never have to look at an axe across the job and wonder if it is mine or not. You talked about burning the end there with your dull sand paper. same principle I think to seal up the grain. I just do it to the whole handle.
Beautiful double bit brother….. I wish I had one to put my mitts on
NICE axe Bill ,dead nuts. Never had a pleasure axe myself. Seems to be alot of mass production regional axes on the web these days. Good to see quality tool steel made on this side of the pond.
Like always nice video and what a beauty throwing axe 😍
On the new Stihl there is a button on the top it’s for compression I guess and then it’s starts easily to start you can push it a couple of times
Greetings from Hamburg Germany
I just a bought a 261 couple weeks ago and having a blast with it!
Looks like quite the saw!
Me too,love it
I have the same saw, its a great saw.
How's it holding up? I'm on the fence between the 550XP Mark II and the 261 C-M.
@@skycorrigan6511 Get the 261cm, easier maintenance overall and more metal while 1 lb lighter than the 550xp mk2. Empty power head on my scale is 4.9kg on the 261, 6.5kg with 16 inch 325 and oil/fuel tanks full. It's light in the hand for limbing too but it packs a punch, I'm glad I got it over 241, a friend has it and its 6.1kg fully stacked, so 1lb less, but its 3.1hp while 261 is 4.1. I believe 550xp comes close to 7kg with a 16 inch bar and all tanks full.
Have a little 261c an love that thing.
Greetings, Bill. I see that you modified the muffler. The truth is that the new stihls are cutting edge technology but they are very restricted and must be rectified, the improvement will be noticed. There is nothing like the old school: robustness, simplicity and reliability. like a 034 av super talking about stihls and in its category. a hug
IVAN Yes Yes & Yes IVAN I couldn't agree more all this modern technology power to weight plastic ratio gizmo is just not my bag buddy I'm glad someone else agrees 💪❤️👍
Hey Buckin, just subscribed to your fantastic channel, big hello to all your army of fans, you’ve certainly kept me fully
Entertained over Christmas break watching all your different stuff, so a big thank you, I’ve been encouraged through
Your teaching to throw away that Freakin hand file guide and getting that Gullet, my chains are now much sharper
As my technic improves, Cheers fella.
Welcome to the community and go back 3 years or so for some great videos!
Scanvgt Holt,
Welcome to the family, my friend. Glad you popped in to the comment section. Ole Buckin' sure does put out awesome video's. His love for his craft is obvious and his positivity is contagious. Mr. Rubish is quite right, go back to the beginning and see how BBR started his journey in creating this place we all love. Blessings to you and your.
Scanvgt Holt, Welcome to the channel!
Welcome to the family Scanvgt, interesting name but I like it, love from Scotland buddy 💪❤️👍
WELCOME WELCOME WELCOME!!!!!!!!!!!!!!!!! blessings and aloha T
I done my windblown uprooted trees course with one of these lovely little saw fella
BROTHER LEIGHTON SAY HI TO HALEY IS IT? NO ,, IS THAT RITE ?,,,,LOVE ...
@@BuckinBillyRaySmith yes lol will do cheers mate hope you and the family had a great Christmas and happy new year let's hope you reach the big 100k this year fella. Glad your doing well mate 👍
Stihl running my 026 and having fun with it. Very good friend
Love my 261, I just recently modded the muffler and removed the spark arrestor.
Howdy Buckin great video
Cheers everyone
The Hurty Gurty Man! Oh yeah, us old timers know!! Love ya Bud
That bad boy should be Hurdy Gurdy Man! My bad!
YOU GOT IT
I wish I lived closer to you buckin. I could get ol Walker to do up my 029 super . It's just my firewood cutter but it would probably save some time
He's! !! A wood Mann! !!!!!!!!!😂👍👍👏👏love it
Good Day Leonard!
@@krustysurfer hi mate!!!
Freaking nice saw I love mine. I have a 391 homeowner farm saw as well.
Welcome new subscribers, and a happy new year to you all, to a other safe and better to us all. Thanks for all the good vibes and info, also careful love from you all, most of all thanks to you buckin and be kind to all walks of life.
RODNEY ,,ALWAYS GREAT TA SEE YER FACE ^PAL LOVE YA
Blessings and Aloha RT
Hihanne Wastelo Kola!
I swear every time you have a stihl I. Your hands I have to do a double take😂 little fella was a ripper I’d sa👌 I would be very surprised if there is anyone here who doesn’t feel the love! I’ve said it once and I’ll say it again...they broke the mold after you buddy. Love to you and the family❤️
HE HE HE ,, YOU NO ME FORD CHEVY DODGE WHAT EVER
she has some RPM's to her huh!
and we are a Husqvarnason ;)
Saw the Kelly Axe sign on your wall. I knew a guy who worked at Kelly Axe in Charleston WV.
Sporty little saw!
stihl ms 260 is the best saw ever in my opinion. Never gotten to try the 261 but it looks frickin' wicked
They're both equally great, that 260 will do you good for decades to come if you take care of it and don't cheap out on gas and oil. I have a 261, 2020 edition but with a normal carburetor. It's a killer. Ran about 12 gas tanks through it so far and it's finally coming to life in it's final form power wise. I'll probably muffler mod it/remove limiters once out of the 2 year warranty. Can't wait!
@@em4703 Sounds Great!
My absolute go to saw outside of my day job is the little Husqvarna 550xp with a .325 20" and as long as you take good care of the chain it will pull a 20" all day. To many people say the 50cc saws can't do it but set the depth gauges right and put a good edge on it and you are good to go. I am even milling 17" shell bark hickory with the 550 sharpened at 10* semi chisle and it's doing alright. With that said I can't begin to explain what I would guve for a good splitting axe and a good 70+cc saw right now. Besides money cuz I just don't have that.
Evening all from across the pond. Hi New freinds joining us your truly welcome here. Hi true blues stay safe and warm.
WooHoo! A new BBR video :) Made my day!
He made mine also girl ❤️U
I normally press the throttle while engaging chock,let go and pull cord so it turns a bit. I then move it too fast idle(press throttle and it will jump out of choke) and pull cord and engine starts flawless everytime. Good saws.
The Walker's never leave a doubt if it cut's it can cut better, a trademark to live by for sure..Friend's have a great day and leave a smile
wherever you go..Take care out there and will see ya right here the next time, Share your heart friend's there's alway's someone that can
be uplifted..Love to you all..
YOUR SEAT IS READY FOR YOU AT BUCKIN STOCK MY DEAR
@@BuckinBillyRaySmith Aww great to hear my friend, looking forward to it ..
Diggin the shirt
thats really nice ax
I like that saw.
Hey Bucking great video bro and I love my stihl chainsaws
I wanna see the one of your old Mac’s go against the little Stihl in a cutting contest! It’d be neat to see how they compare, love the Monkey Beaver shirt as well! Your enthusiasm is so addicting!
Brian Townsend I have a 325 sprocket and chain I could throw on an ol 10-10
Great little video as always, #BBR! (Might be a simpler hash tag😆)
Spent a fair bit of time on a 261 and when they’re working they are great saw for coppice cutting but they have a notorious problem with clutch bearing failure and if ya don’t catch it straight away then the bearing eats the end of the crank which once it’s out of warranty will most likely write off the saw
I finally see you run a Stihl besides your toppin saw! I cut a lot of wood with an 044 Magnum trying to keep hours off my SP81. Great saw til it finally let go. I sent you another GoPro today, so keep an eye out for it. Use it up!
AL YER A WILD MAN THX PAL
Love that ox head
cool wood stove
My ms261 is a beast nothing like ms261 with a full house grind
I was afraid for his safety. Those 261s are wild. Seriously i have one and it is a good saw, all 50 cc of it.
the 261 was sweet
Buckin! Hey buddy
I've got the same fan on my stove, they work well
RITE ON BRUCE
I have a classic 1998 model 261--from Husqvarna!
Looks nice and comfy in the Bunker with the stove and Scooby fan going.
I always imagine postal workers the world over marveling at the duct taped axes, LOL.
I love mine! I run .325, 24" bar on mine.
Man I got a little 261 I've had for 3 years now all I do is beat the crap out of that thing dropping out of trees getting run over by the machine but she just sluffs it off and keeps on kicking
Yeah we have a 261c wow for a small saw she runs great
Thank you sir. I have actually bought those exact wedges, but they don't have the sharp steps on the outside like the ones Buckin shows here in the video. Appreciate the help though.
Beautiful axes tho..I'm gonna have to get one
BUCKIN !!!!! I have the same Axe- Pen that you have in a cup on your work bench !! i noticed it and had to do a double take.. LOL
Great job in building the axes. Bucken, I would live to see the saw that is up on the wall near the roof jack for the wood stove go rhrew some wood. Can ya? Never seen one of them cut
Love ya from Maine
I haven't seen our lovely Ambassador Cynthia. Hope everything is well with her . We all send love and best wishes to her. One of the original true blues
SHE WAS UNDER THE WEATHER A BIT OL BOY BUT IS BACK IN THE SADDLE
@@BuckinBillyRaySmith morning from a very dark UK. Great to hear the great lady is on the mend. Thanks for the update.
COPY THAT TRUE BLUE PLEASE SAY HI TO YER ARMY
@@BuckinBillyRaySmith I passed on your Hi each one of the 10 farm crew wished you all happy new year said a big Hi back
I bought a 261 a best off a lil saw it ripps