GRINDING YOUR CHAIN SAW BARS TO KEEP YOU FROM CUTTING ON AN ANGLE AND BINDING IN THE CUT, IS AN ESSENTIAL PART OF THE PROFESSIONAL TREE CUTTERS BAR MAINTENANCE PROGRAM
Thanks Billy. I'm teaching with my wife in college, we teach forestry and conservation. Videos like this are great training aids for any age from 17-60 years old. Your videos are the best and only ones we use. Your an invaluable source of knowledge and safety for the next generation. They will grow up to respect and look after trees. Thanks again Billy you are shaping the future.
Bar maintenance is important, no doubt… Oh yes Buckin'...we are getting stronger, and if we all pull in the same direction, great things will happen :) Love and respect brother, love and respect :) Welcome to all the new friends, greetings to the golden oldies.. hope all of you will have a great week :)
I ran a 18” bar through twenty chord and few commercial jobs always dressed my bar out and kept the chains sharp.The day I retired that bar it still had 90 degree rails. It’s the only way to get your money’s worth! Good vid Buckin! Keep it up!
I'm a retired (just barely) music professor who grew up in the woods with that rhythm yer talkin' about. I decided to go whole hog into music. I loved teaching. The whole "higher" education situation, though, is a scam. It probably would have been better to stay in the woods, but I'm very glad that I became so involved with music. Maybe it's time to go back into the woods, singing as I go. Who knows what will happen? Not me.
Thank you for teaching us about Bar maintenance. It dont get no better in the Buckin Army. Always love the Video.Always learn something very important. Thank you my good and true Friend.
Evening Br,I learned a lot about saw maintaining when I lived up the Pacific Northwest on the Washington state/Idaho border from the old timers. I flip my bar every time I cut and I dress the bar up every time I have the side cover off to clean the clutch side or change chains. I have one of granddads 24” homelite bars that’s over 50yrs old and he was religious about flipping the bars and dressing the burrs off of his bars,that bar still cuts straight and true. I needed a 24” on my 267 hotrod saw and I seen the old homie bar hanging up,I cut s couple bushings because homelite studs are bigger and threw a square ground low raker chain on it and got in to some big cedars pines and that bar tracked like a new bar. Moral is,take care of your tools and they will not let you down.
I was going to fast forward through the exercise ball part... but it turned out to be The Best Part of the video!!! Love your view of life!! Let's change the world together!!! :-) Open doors for others, great passers by with a "genuine" Good morning/afternoon" and REALLY MEAN IT when you ask them how they're doing!!! I love... Good People!!!
Enjoyed your chainsaw bar maintenance demonstration. But when you were in the house balancing on the ball I couldn't hear you very well at all even though my volume was at 100 per cent. The music in the background was very nice and low enough it didn't interfere with hearing you talk. Enjoyed hearing you play your drums! Thank you for being so willing to share your knowledge and experience with your equipment so we can all take better care of our own. Welcome all new subscribers! Hope you all have a good evening.
Oregon drive link codes: 72 = 3/8" - .050" 73 = 3/8" - .058" 75 = 3/8" - .063" I think you're going to confuse a few people with that chain gauge info, what's written on the (Oregon) drive links is their code not the actual chain gauge. Every chain brand has their own different codes. Hope this helps, good day everyone.
I just finished editing and uploading a video where another truck driver did something dangerous. Typically, it's easiest just to call him a name and then move on. But I've been thinking about things you say about kindness. Even though he endangered my life, the life or another driver, and a handful of car drivers all around us, I stopped and pondered what sort of relationships he has with his special people, his boss, etc. Who knows his story? Not me. Your philosophical moments are the best parts of your vids (at least for me). I grew up in the woods of Oregon and I've noticed that we share a lot (about logging and life). I've already noticed that my vids have changed a little just in the brief time since I've discovered your vids. Keep buckin'. You're on the right path.
Brother Billy you are quite the music machine .I didn't know you had a talent to play all them instrument.I am really amazed with your playing carry on bro .You are dynamite.
Ha! The night I found this channel I had just come in from the work bench filing and grinding my bar. Learned a lot here, about what I can improve on! Thanks Buck'in! And thanks for all the positive energy. Keep it going !!!
And here I thought bar maintainance was sweeping up after bar close - learn something new everyday and you're well on your way to being a better person!
You don't care what folks think of you. But you sure as hell care about folks. Rock on man. The world needs to wake up and watch the love and kindness on this channel. Only good and great things will come of it. Thanks to you for cranking my days up to top gear. Dressing the bar shown superbly.
Super informative Billy....loved it !! I did my rails a few weeks back on an older bar and it took a ton of passes to even it up, I was shocked. Looks perfect again. Thx for all the effort you put in brother...it will never go unnoticed. Much LOVE to all you fine good people this Sunday 💖💖 We all got out daily dose of vitamin "B"ILLY today 😃👋👍
Today I had to go give price on a snow removal job on the way I was stopped at a red light and I noticed a man with a couple of small shopping bags in one hand raggedy dirtiest jacket on it's cold and wet in a little bit rainy today and I saw him picking up trash so I put my window down and ask them if he was just volunteering on his own will or if somebody asked him to do it he said no he was just doing it to be nice he said it helps him pass the time so I gave him a couple bucks for a cup of coffee it made me feel good that he was doing that without having an agenda. love wins
I have a old logging buddy who never maintained his bars. He would throw them out, I snagged up everyone he was throwing out. Hell I don't think I've bought a bar in 25 years. Now I just need to find a teeth stretcher so my chains last longer haha. My other logging buddies like to run that 404 chain, no clue why. To much Cerf for me. I like My 3\8. I think they like that thicker chain because they wedge every tree they fell. I'm a stump jumper. That's what all the very old school loggers call me. I have never broke a tree and I cut a lot of veneer. Billy's one hell of a feller. I been felling trees for almost 27 years and I seen Billy fell a few trees without a wedge that I sure as hell wouldn't have dropped with out a wedge. Great video's Billy. Keep up the great work.
After cutting my firewood and others for 44 years, I thought I knew a little about saws. You proved me wrong again Buckin. I have several bars I need to work on. Many thanks.
Just ground a few bars for a friend Thursday👍 it makes a world of difference. Good tips and tricks buckin! Thank you for sharing! Love to you and the family❤️
Great info for those of us just learning this stuff. I've been binge watching your videos for the past week and have learned lots. Thanks for doing what you do bud!
Thanks Bill.A subject that I was looking forward to, very important and that will help us to maintain and care for the bar and that I will now be able to do correctly thanks to your guidelines. a hug Bill and again thank you👍👍
You have saved many people a lot of angst and frustration by teaching this. I had no idea what was wrong with my crooked cutting and binding chain saw. Now I love using my chainsaw again. Thanks so much!!
Did the bar maintenance thing years ago when I worked at a farm equipment dealer that sold Pioneer chain saws (yes Chain Saws here in Ontario). I have seen them with so much roll over on the edge that you had to remove that first before they would sit flat. Buckin, you provide so much good and sound information. I am just starting to catch up with your videos. Love what you are doing. Glad to be parts of the Buckin army.
Guilty, thanks for this video. Although a novice the hurricanes Give my ms 250 a workout and I am always learning and getting better. Love your channel.
I'm sure it's been said before but buckin a I have learned a lot from your videos live in northern Minnesota I'm 60 years old have run chainsaws occasionally here and there deer stands whatever fallen trees I have learnt more from you in the short time I've watched your videos then I've ever known in my life I'm lucky I'm still alive take care and may God watch over you and your pursuit of life and happiness stay clean man
Just going back watching some of your old videos since I'm fairly new to your channel. So many people do not know anything about bar maintenance. I get it all the time here's my chainsaw get it running for me and while you're at it I brought this new bar and chain can you put it on when you're done it was cutting crooked last time I used it. I usually say well I can or I can file your old chain so it cuts better than new and maintenance your bar so that it will cut straight. Then you will have a spare bar and chain. Great tip on the belt Sander for normal people who wouldn't have a bar grinder.
i am learning so much from your channel. i greatly appreciate you taking the time to share your knowledge. im sure youre helping many people understand why a chainsaw cuts like it does(good or bad). 👍👍👍👍👍
Billy ray , thank you for these informational videos my friend , ive learned so much about saws & maintenance thru your knowledge . I will be with out a doubt one of your biggest fans on here . Thanks bud .
Never to old to learn. Thanks for the information. I have thrown bars away, because they did not perform like I wanted. Probably needing some love that I was to ignorant to know that. Thanks Buckin.
Thank you for the great video. I just did the bar maintenance on both of my stihl ms 290 bars and with my fresh ground chains I just did they both cut great. Thank you
Never flipped my bar cause I don't cut much wood but the chainsaw would stop cutting once the full bar was in the wood. Tomorrow the problem will be fixed. Big huggs and thank you.
man i love this channel!!!! just found you a few days ago and you do all the things i love. Saws and old trucks and things. And i love the drums in the background on a few of these vids.
I'm glad I found this video. I have an old bar that I thought was bent because it would not cut straight even with a new chain. I just went and looked at it and saw that the one rail was almost 1/6 higher then the other and has v grooved the center a little. Now I can fix it and have a spare.
ok i make a chicken dinner with all the trimmins and yorkshire puddings for me n the mrs [which went down well] with bread n butter pudding for afters..........i then think i,l watch a bbr vid on bar maintenance..........my stomach makes a gurglin noise when i see bbr on a space hopper in his underwear..............the bucket wasnt needed and as usual the buckin info was spot on. x have a good xmas folks all the best
Great video on bar maintenance friend. So important to maintain your equipment properly so it functions properly. I get excited when i see a new video from you pop up. I know im gonna learn something. You are the man!
Love ya bud. Change the world...its workin for sure. I'm workin with ya from the middle of the USA. I believe and your a heck of a drivin force my friend.
SWEET! Blessings and Aloha Soldiers of Kindness! looking forward to making some very sharp Chains- Thank You Billy Once again For the Great Video! #LoveWins
Hi, thanks for all your stuff but a special thanks for this one. The past few days i ve filing more than running my saw. But now! I enjoy again my saw. By the way you are very good on the yoga ball. Keep goin!
Been watchin ya for a while (Hunicke’s fault 😂) and it’s all gold, puts a smile on my face every time! HAD to subscribe after seeing your kindness/ball balance bit, you’re totally fun to watch at work. Love it!
Your such an inspiration billy I'm with you on the love .... I will be here to see the change looking forward to the great things the future will bring
@@BuckinBillyRaySmith a good man told me if you have knowlage share it and you do just that great full to have a freind like you Billy everyone who watches your channel is blessed!!!
Hello Buckin'! You are a true inspiration and motivator i look forward to your videos everyday, keep up the good work and positive vibes! I've actually been inspired build a few axes myself after watching your videos. I posted the axe builds and restoration up on my channel, and I mentioned your name a few times, ha just thought I'd let you know. And also i cant wait to get out and file up my chainsaws using your advice. Merry Christmas season, and love to you and your family.
Thank You ! I have learned so much on this video which will be a big help and answers so many questions I have asked myself and have not been able to figure out. Thank you Once again. :-)
Buckin' Billy Ray Smith 👍 yes sir...Merry Christmas to you and your family!! And remember friends, the greatest gift of all is Love!! (and more videos from uncle buckin!) BE KIND!
Hi Billy first all happy New Year be safe there are so many things could be said so many different ways to say them but it all boils down to from the bottom of my heart thank you for sharing your knowledge and this is a better world because of you
I just subscribed about a week ago. (I'm from Louisiana) I really enjoy your videos and they have helped me understand my chainsaws much better and how to use/maintain them. You're doing an awesome job! Thanks for the great content! P.S. You & Steve (Steve's Small Engine Saloon) are my to favorite Canadians!
i gotta get on the ball, literally. nice drumming in the background. I must maintain the bar, but my saw needs to see wood first..lol. There's no ridge here. tc & Merry Christmas Buckin'
![CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!](http://i.ytimg.com/vi/Ldr3_fvTEXk/mqdefault.jpg)
Thanks Billy. I'm teaching with my wife in college, we teach forestry and conservation. Videos like this are great training aids for any age from 17-60 years old. Your videos are the best and only ones we use. Your an invaluable source of knowledge and safety for the next generation. They will grow up to respect and look after trees. Thanks again Billy you are shaping the future.
Jo Bishop ! , arrrrm what did billy bunter teach your wife ?
My brother Bily Ray you are the man, thanks for teaching us younger guys! someones gota do it and you go above and beyond!
IM NOT TAKIN IT TO THE GRAVE BUDDY HAHAHAHA LOVE YA
Buckin' Billy Ray Smith where would one find a bar grinder like that one?
My Landscrapes ..., bucking billy bunter ...nice guy ....cuts down trees ( poor trees ) please dont think he's a god !
@@markdudley3831 he is a god, actually we all are..... Listen to Billy's wisdom friend 💙
Bar maintenance is important, no doubt… Oh yes Buckin'...we are getting stronger, and if we all pull in the same direction, great things will happen :) Love and respect brother, love and respect :) Welcome to all the new friends, greetings to the golden oldies.. hope all of you will have a great week :)
ITS HAPPENING FRIEND
I ran a 18” bar through twenty chord and few commercial jobs always dressed my bar out and kept the chains sharp.The day I retired that bar it still had 90 degree rails. It’s the only way to get your money’s worth! Good vid Buckin! Keep it up!
I'm a retired (just barely) music professor who grew up in the woods with that rhythm yer talkin' about. I decided to go whole hog into music. I loved teaching. The whole "higher" education situation, though, is a scam. It probably would have been better to stay in the woods, but I'm very glad that I became so involved with music. Maybe it's time to go back into the woods, singing as I go. Who knows what will happen? Not me.
Thank you for teaching us about Bar maintenance. It dont get no better in the Buckin Army. Always love the Video.Always learn something very important. Thank you my good and true Friend.
Evening Br,I learned a lot about saw maintaining when I lived up the Pacific Northwest on the Washington state/Idaho border from the old timers. I flip my bar every time I cut and I dress the bar up every time I have the side cover off to clean the clutch side or change chains. I have one of granddads 24” homelite bars that’s over 50yrs old and he was religious about flipping the bars and dressing the burrs off of his bars,that bar still cuts straight and true. I needed a 24” on my 267 hotrod saw and I seen the old homie bar hanging up,I cut s couple bushings because homelite studs are bigger and threw a square ground low raker chain on it and got in to some big cedars pines and that bar tracked like a new bar. Moral is,take care of your tools and they will not let you down.
I was going to fast forward through the exercise ball part... but it turned out to be The Best Part of the video!!! Love your view of life!! Let's change the world together!!! :-) Open doors for others, great passers by with a "genuine" Good morning/afternoon" and REALLY MEAN IT when you ask them how they're doing!!! I love... Good People!!!
Enjoyed your chainsaw bar maintenance demonstration. But when you were in the house balancing on the ball I couldn't hear you very well at all even though my volume was at 100 per cent. The music in the background was very nice and low enough it didn't interfere with hearing you talk. Enjoyed hearing you play your drums! Thank you for being so willing to share your knowledge and experience with your equipment so we can all take better care of our own. Welcome all new subscribers! Hope you all have a good evening.
Oregon drive link codes:
72 = 3/8" - .050"
73 = 3/8" - .058"
75 = 3/8" - .063"
I think you're going to confuse a few people with that chain gauge info, what's written on the (Oregon) drive links is their code not the actual chain gauge. Every chain brand has their own different codes.
Hope this helps, good day everyone.
You're a riot thank God for you Billy Ray! ❤🌲
I just finished editing and uploading a video where another truck driver did something dangerous. Typically, it's easiest just to call him a name and then move on. But I've been thinking about things you say about kindness. Even though he endangered my life, the life or another driver, and a handful of car drivers all around us, I stopped and pondered what sort of relationships he has with his special people, his boss, etc. Who knows his story? Not me. Your philosophical moments are the best parts of your vids (at least for me). I grew up in the woods of Oregon and I've noticed that we share a lot (about logging and life). I've already noticed that my vids have changed a little just in the brief time since I've discovered your vids. Keep buckin'. You're on the right path.
Brother Billy you are quite the music machine .I didn't know you had a talent to play all them instrument.I am really amazed with your playing carry on bro .You are dynamite.
Ha! The night I found this channel I had just come in from the work bench filing and grinding my bar. Learned a lot here, about what I can improve on! Thanks Buck'in! And thanks for all the positive energy. Keep it going !!!
The production value really goes up with that royalty free background music. Just amazing. I love the drumming 😀
HA HA LOVE IT
This is detail that not many show, but many inexperienced people really need, so thanks for that! Merry Christmas to you and the family!
YOU BET BROTHER ,,PEACE TO YER HOME THIS SEASON
The siding on your house is beautiful. Thanks for the tip and keep up the positive attitude. Your a wonderful person.
And here I thought bar maintainance was sweeping up after bar close - learn something new everyday and you're well on your way to being a better person!
Billy you're my hero, I just turned 40 and I'm starting life over and I'm emulating you good sir. Be good humans! 💙🪓
You don't care what folks think of you. But you sure as hell care about folks. Rock on man. The world needs to wake up and watch the love and kindness on this channel. Only good and great things will come of it. Thanks to you for cranking my days up to top gear. Dressing the bar shown superbly.
This is by far the most entertaining educating vidja. Crazy guy Billy
Super informative Billy....loved it !!
I did my rails a few weeks back on an older bar and it took a ton of passes to even it up, I was shocked. Looks perfect again.
Thx for all the effort you put in brother...it will never go unnoticed.
Much LOVE to all you fine good people this Sunday 💖💖
We all got out daily dose of vitamin "B"ILLY today 😃👋👍
Today I had to go give price on a snow removal job on the way I was stopped at a red light and I noticed a man with a couple of small shopping bags in one hand raggedy dirtiest jacket on it's cold and wet in a little bit rainy today and I saw him picking up trash so I put my window down and ask them if he was just volunteering on his own will or if somebody asked him to do it he said no he was just doing it to be nice he said it helps him pass the time so I gave him a couple bucks for a cup of coffee it made me feel good that he was doing that without having an agenda. love wins
I have a old logging buddy who never maintained his bars. He would throw them out, I snagged up everyone he was throwing out. Hell I don't think I've bought a bar in 25 years. Now I just need to find a teeth stretcher so my chains last longer haha. My other logging buddies like to run that 404 chain, no clue why. To much Cerf for me. I like My 3\8. I think they like that thicker chain because they wedge every tree they fell. I'm a stump jumper. That's what all the very old school loggers call me. I have never broke a tree and I cut a lot of veneer. Billy's one hell of a feller. I been felling trees for almost 27 years and I seen Billy fell a few trees without a wedge that I sure as hell wouldn't have dropped with out a wedge. Great video's Billy. Keep up the great work.
After cutting my firewood and others for 44 years, I thought I knew a little about saws. You proved me wrong again Buckin. I have several bars I need to work on. Many thanks.
Just ground a few bars for a friend Thursday👍 it makes a world of difference. Good tips and tricks buckin! Thank you for sharing! Love to you and the family❤️
Lots of attention to small details = good cutting, Thanks Buckin
INDEED WANGO
Great info for those of us just learning this stuff. I've been binge watching your videos for the past week and have learned lots. Thanks for doing what you do bud!
Thanks Bill.A subject that I was looking forward to, very important and that will help us to maintain and care for the bar and that I will now be able to do correctly thanks to your guidelines. a hug Bill and again thank you👍👍
Good Video Billy! So insightful and a beauty word on kindness. Thanks for sharing. Be extra Kind Friends.
Billy you and your attitude bring me joy!
You have saved many people a lot of angst and frustration by teaching this. I had no idea what was wrong with my crooked cutting and binding chain saw. Now I love using my chainsaw again. Thanks so much!!
Thanks for the tip about running the nest wider gauge chain on worn bars. That will save all your viewers $$$! Thanks for another great video!
Billy Ray, you are an inspiration!
Thank you.
HEY DAN THX
Did the bar maintenance thing years ago when I worked at a farm equipment dealer that sold Pioneer chain saws (yes Chain Saws here in Ontario). I have seen them with so much roll over on the edge that you had to remove that first before they would sit flat.
Buckin, you provide so much good and sound information. I am just starting to catch up with your videos. Love what you are doing. Glad to be parts of the Buckin army.
Every video puts such a big smile on my face. Love em!
Guilty, thanks for this video. Although a novice the hurricanes
Give my ms 250 a workout and I am always learning and getting better. Love your channel.
I like the way you hold the left drumstick, Billy. Old school, Gene Krupa style. I love that big old Ludwig drumset you have too. Too cool.
THX DAVID
I LOVE those old trucks! Thanks for the video!
Hi Buckin’ Hi All. BE KIND and flip your bars, loving the maintenance videos!
Thank you Billy this video had saved my power saw bars thank you so much for your kindness and your information
Another important lesson grateful learned, Buckin.
I'm sure it's been said before but buckin a I have learned a lot from your videos live in northern Minnesota I'm 60 years old have run chainsaws occasionally here and there deer stands whatever fallen trees I have learnt more from you in the short time I've watched your videos then I've ever known in my life I'm lucky I'm still alive take care and may God watch over you and your pursuit of life and happiness stay clean man
Just going back watching some of your old videos since I'm fairly new to your channel. So many people do not know anything about bar maintenance. I get it all the time here's my chainsaw get it running for me and while you're at it I brought this new bar and chain can you put it on when you're done it was cutting crooked last time I used it. I usually say well I can or I can file your old chain so it cuts better than new and maintenance your bar so that it will cut straight. Then you will have a spare bar and chain. Great tip on the belt Sander for normal people who wouldn't have a bar grinder.
I came here for chainsaw maintenance and learned valuable life lessons.
i am learning so much from your channel. i greatly appreciate you taking the time to share your knowledge. im sure youre helping many people understand why a chainsaw cuts like it does(good or bad). 👍👍👍👍👍
Billy ray , thank you for these informational videos my friend , ive learned so much about saws & maintenance thru your knowledge . I will be with out a doubt one of your biggest fans on here . Thanks bud .
Never to old to learn. Thanks for the information. I have thrown bars away, because they did not perform like
I wanted. Probably needing some love that I was to ignorant to know that. Thanks Buckin.
Thank you for the great video. I just did the bar maintenance on both of my stihl ms 290 bars and with my fresh ground chains I just did they both cut great. Thank you
Never flipped my bar cause I don't cut much wood but the chainsaw would stop cutting once the full bar was in the wood. Tomorrow the problem will be fixed. Big huggs and thank you.
Thanks for great info and an entertaining video Billy. I just love all of your content. Cheers mate.
Love the additude mate world would be a better place if there was more people like u in It love from australia
Bar maintenance... “groovy”. Har har har! Have a productive day every one.
Ahwooooo 👍
Grate video! I learn alot from the information you are giving it to us! Thanks!
man i love this channel!!!! just found you a few days ago and you do all the things i love. Saws and old trucks and things. And i love the drums in the background on a few of these vids.
I'm glad I found this video. I have an old bar that I thought was bent because it would not cut straight even with a new chain. I just went and looked at it and saw that the one rail was almost 1/6 higher then the other and has v grooved the center a little. Now I can fix it and have a spare.
ok i make a chicken dinner with all the trimmins and yorkshire puddings for me n the mrs [which went down well] with bread n butter pudding for afters..........i then think i,l watch a bbr vid on bar maintenance..........my stomach makes a gurglin noise when i see bbr on a space hopper in his underwear..............the bucket wasnt needed and as usual the buckin info was spot on. x have a good xmas folks all the best
HEY ROOFIN
Great video on bar maintenance friend. So important to maintain your equipment properly so it functions properly. I get excited when i see a new video from you pop up. I know im gonna learn something. You are the man!
kool brad
I think you are a great videographer and one most entertaining guy .
Love ya bud. Change the world...its workin for sure. I'm workin with ya from the middle of the USA. I believe and your a heck of a drivin force my friend.
Very important information
Amazing, thanks for taking time and effort and energy to share your knowledge and secrets.
Thank you, For teaching us and keeping us safe.
Good tips Buckin', keep em coming.
Great content and instruction from Your experience! I thank You for IT!
Well done Brother!
SWEET! Blessings and Aloha Soldiers of Kindness! looking forward to making some very sharp Chains- Thank You Billy Once again For the Great Video! #LoveWins
BAR MAINTENANCE IS KEY!!!!!!!!!!!!!!!!!!!!!!!!!!!!! we try to flip whenever its time to spruce up the chain - old timers advice! great stuff Billy Ray
111111w questions111q2 w acrotomophi
BILLY You are super talented man, is mind blowing to watch the videos. KEEP UP, Jacek from UK
l sharping all the chains for two disaster group,l have learn a lot from you about sharping and bar dressing , thanks
You are music to my ears ! Bravo:)
More great info, thanks Buckin! That Komatsu will be cutting like new, I can feel it!
Thanks for your educational and inspirational video. Keep up the good work👍🏼.
Hi, thanks for all your stuff but a special thanks for this one. The past few days i ve filing more than running my saw.
But now! I enjoy again my saw.
By the way you are very good on the yoga ball.
Keep goin!
Been watchin ya for a while (Hunicke’s fault 😂) and it’s all gold, puts a smile on my face every time! HAD to subscribe after seeing your kindness/ball balance bit, you’re totally fun to watch at work. Love it!
Your such an inspiration billy I'm with you on the love .... I will be here to see the change looking forward to the great things the future will bring
IT IS HAPPENING NOW , THX FRIEND
@@BuckinBillyRaySmith a good man told me if you have knowlage share it and you do just that great full to have a freind like you Billy everyone who watches your channel is blessed!!!
Thank you my man just the answer I was looking for keep up the good work
Thanks for sharing the knowledge you have helped me so much!!
Hello Buckin'! You are a true inspiration and motivator i look forward to your videos everyday, keep up the good work and positive vibes! I've actually been inspired build a few axes myself after watching your videos. I posted the axe builds and restoration up on my channel, and I mentioned your name a few times, ha just thought I'd let you know. And also i cant wait to get out and file up my chainsaws using your advice. Merry Christmas season, and love to you and your family.
Another awesome edutainment video Buckin'. Stay safe friend!
Another great great video thank u buckin 👍👍
Awesome ! Thanks Billy you are a great enthusiastic Teacher.
CUTTIN' WOOD SHOULD NOT BE A FRUSTRATING AFFAIR , AND IF I CAN HELP WITH THIS , IM GONNA LOVE TO YA
Your awesome and funny that's priceless I love it thank you for the positivity and knowledge
Awesome video thanks for the teaching lesson
great info i am going to clean up my bars and inspect them. thanks Buckin.
There u have it. Great job B.B.R. take care good people
Thanks for this great video buckin!
Thank You ! I have learned so much on this video which will be a big help and answers so many questions I have asked myself and have not been able to figure out. Thank you Once again. :-)
Friends, a chainsaw is now officially called a powersaw! Thanks for your corporation in advance! Good stuff! 👍
NOW YER GETTIN IT ,, MERRY CHRISTMAS
Buckin' Billy Ray Smith 👍 yes sir...Merry Christmas to you and your family!! And remember friends, the greatest gift of all is Love!! (and more videos from uncle buckin!) BE KIND!
Hi Billy first all happy New Year be safe there are so many things could be said so many different ways to say them but it all boils down to from the bottom of my heart thank you for sharing your knowledge and this is a better world because of you
Enjoyed learning more & more. & billy I’d like to add. You are out of your bar flipping mind haha. Have a good day friend
Hi Buckin great video hi to all the Buckin amy stay safe everyone
Great video, hello from Michigan. Thanks for sharing
HEY YOU GUYS ,, MERRY CHRISTMAS TO YOUS
Great attitude buddy ,and great advice.keep it up man....
I just subscribed about a week ago. (I'm from Louisiana) I really enjoy your videos and they have helped me understand my chainsaws much better and how to use/maintain them. You're doing an awesome job! Thanks for the great content!
P.S. You & Steve (Steve's Small Engine Saloon) are my to favorite Canadians!
awesome jake thx pal
Great message Buckin ...
Brother you are the man!
i gotta get on the ball, literally. nice drumming in the background. I must maintain the bar, but my saw needs to see wood first..lol. There's no ridge here.
tc & Merry Christmas Buckin'
Man your boy was jamming another great video can u show us the old school way to do your bars for people who doesn't have a grinder
YES
I just flipped my bar. Hahaha. 👍👍👍👍👍 love your ambiance buddy.
HEY MARCO POWER SAWS ARE LOVE LOL
Way to take care of that body, buckin. Good for you man. 10% of something is always better than 100% of nothing!