Buckin’ Billy - - - love your videos, and watch them a lot. You guys forget something regarding the 70+cc saws. For us older guys, particularly those with longtime, troublesome shoulder, or upper arm injuries, it’s VERY difficult, if not impossible for us to crank a 70cc saw. So, we use a smaller saw that we can handle - - rather than quit. I’m 80 years old, started running saws in 1953, when I was 10 - - - and I’m not ready to quit, so I use something in the mid-50cc range. Keep up the good work.
and that's exactly why I run a 32" bar on my MS 362 CARBURETED VERSION I also have a bark box on it, and a WC Saws Foam Air Filter.....I do run Full Skip Chisel Bit chain, and it RIPS !....I did buy the Stihl ES Light bar, which helps with the balance of the longer bar, and it's truely a joy to run.....I'm 75 now, and bending over is not much of an option any more ... I'm an old Orygun Faller and still enjoy the saws.....OnWard.....
Spot on my friend, my 362" is set up very similar and I love it. Been looking at the new MS400 as a nice upgrade in power but with nearly the same size an weight.
I have the 362 M tronic run the West Coast Bark Box and their air filtration system. I either run a 25” or a 20” due to cutting in tight places but all upright! I’m 63 and those days of bent over are long gone and it just doesn’t make sense for chains I run a full skip chisel sharp but I m always reaching for my 036 Pro as it’s way more torque to me.
This is a west coast mindset for sure. Ohio arborist that runs a 362, 461, and a 661 on the ground on a regular basis. I wouldn’t even think of putting longer than a 20” bar on my 362. I’ll run up to a 28 on the 461, but I’m not putting anything over 30” on any saw but the 661.
I’m curious as to why you capitalized “carbureted version”? Does the bar size make a difference on that particular model vs the m-tronic? I’ve been eyeing the 362 and/or 462 but am stuck on whether m-tonic is worth it or not. If I’m gonna spend money I wanna make sure I get the best bang for my buck and have the best setup.
@@rogerpowers3891 I recently bought some land and a new double wide that’s getting built. And I have never owned a chainsaw, now that I own a full wooded lot, I need one. I’m getting a carbureted model Stihl MS362, the main reason why is so I can tune the high speed and low speed needles my self. They are quick and easy to access, and it’s super easy. I have been back and forward all the time on the Mtronic models. I want to get an Mtronic, but look at the old saws in this video. Do you really want to go adding all these electronics to a chain saw? It’s another point of failure. I couldn’t find a consistent answer on Mtronic or non Mtronic. So I read the Stihl reviews on Stihl’s website, most of all the bad reviews “Very few bad reviews” are from people complaining about the Mtronic system. The chances are slim, but they are there. This saw MS362 saw brand new is like $900 bucks plus taxes. So $962 range out the door. We need it to just work and run without issues. I’d love to go Mtronic but I’m just not sure.
Billy Ray.. thank you man.. I have been watching and learning from a great teacher. Today I cut down 8 of my trees. I got them to fall where I needed them to go and I bucked them without killing my back. Best of all, I did a trick cut with a double wedge that rotated the tree on its base 90 degrees as it tipped and fell. That allowed the limbs to untangle from another tree and avoid powerlines..you are the best..
I got a 20" bar on my 362. Always loved it. I also got a 31" bar at home but never used it so far. I'll give it a try. My mother in law always used long bars on her Husquvarnas, just for the benefit of standing upright. Well, I must admit it has its benefits. Greetings from the land of explosive trees. P.S.: The oiler on my 362 runs the chain dry as a fart. With 20". I am upgrading it a piston from a 460 US model.
Hey Buckin', when I was growing up one of our neighbors who lived through the woods from us about 4 miles worked at the sawmill sawing logs. He was a big man, about 6'5'' and carried the biggest Stihl saw I had ever seen with a 5-6' bar on it! His name was Jesse Chriscoe ( he was a wonderful man like you). This was in the late '60's - early '70's. Almost everyone burned wood then and hardly anyone I knew had a saw with a 20'' bar. McCullochs and Homelites were the dominant saws! Great video and info! From Sophia, N.C. USA
Billy great video , i started running saw when i was 12 i am 63 now and need a new hip and have had two back surgery's , but i still run saw because i love it , last year i got a husky 562 xp with a 24 in bar great saw i was running a 044 mag stihl with a 28 in bar before that , great advice on running a longer bar ,it will save your back and the more you can stand up and not have to bend over all the time the better ,i run saw in northern idaho . like you i always watch the tip of the saw . God bless
You've given me a new perspective on sawing with longer bar with more power = stand up and save your back, I've been thinking about it all wrong with going light as possible with shorter bar
My heavens that P42 works great!..she sounds amazing!…I have a 362 and she’s a runner!..I have a 440 and she will hang with the 440 any day of the week!!
Buckin. As always your spot on with all the information. I thank you for everything you have taught me through this channel. Ive cut down trees that I normally wood have walked away from. But because of you and what I’ve learned I have made a few more stumps. Keep it coming. ❤
In this case he is not right with ALL his information regarding oiling. He is ~75% right about the oiler. If in large wood all the time, you need more oil otherwise the chain/bar load up with sawdust and JAMS and you have to continually clear it and likewise do not get oil to your tip bearing at end of bar causing heat/wear/jamming. Now 90% of everyone is NOT in large wood and never see this problem. This is essentially a bucking into firewood problem only in LARGE wood. Fallers will not see this problem. Likewise if you are in SMALL wood all the time, pouring expensive oil all over creation is also DUMB and a waste of $$$ and why you want to squeeze down your oiler on your larger saw if you know you will be running in a lot of small stuff. Most guys just have a smaller saw which comes from the factory... squeezed down and likewise never see this problem. Next point is if you use USED gear/transmission/engine oil(run it through a filter first). I do and therefore have to open my oiler up wider as it is LESS tacky than the commercial bar oil. Differences between transmission/engine oil necessitate this as well. But at ~$20/gallon oil currently, this saves a LOT of $$$.
I do trail work so am regularly spend more time carrying a saw more than I cut with it. Many folks go with the 261 and an 18" bar for weight, but for me, I like the 362 with a 20". Definitely worth the extra pound or two when you hit those oaks that need double barring. I will often run a 28" on it for limbing and bucking for exactly the reasons you demonstrate. If I am not hiking, the 660 with a 36" is always fun to run.
@@everythingnerd7168 Depends on where you are at. I work with a hiking group called Carolina Mountain Club. But there are also groups for mountain bikers and horse back riders that do similiar work. I used to work for the US Forest Service so already had the sawyer certs so it was easy to jump in.
@@BenKickert I didnt even know they offered certifications. I am on the east coast but most of the trails I would volunteer on are national forest land. There is also a lot of state land around here. How do you get those certifications? I just looked at the usda and nwcg websites. I am a little confused now
@@everythingnerd7168 Call your local Forest Service ranger district and ask about volunteer trail work opportunities. My training and cert was done by USFS but is recognized for when I work on NPS land. But, I can only work on those public lands because the organization I volunteer with has an MOU with those agencies.
I remember when I was a Wild land firefighter, I would help the sawyer. He would carry a MS 362 and it worked great. So that's what I bought, I have been using it since, Its a great saw.
You know I’ve never really given Stihl a chance but recently picked up a 361 and built a muffler for it. So far I’m extremely happy with it. Gotta get a 28” bar for it and really put it to work.
I have run this as my primary saw with a 28” thin Kerf cannon super mini bar for 8 years in hardwoods. It took me three years to track down a OEM wrap handle for it but I finally found one. I also did the bark box and wcs dogs on it. Been a great saw. For anything it can’t handle I run an 881 with a 41” bar. They say that the 362 has the highest power to weight ratio of any Stihl prior to the ms500… I believe it.
Did you get the longer clutch cover as well? Stihl sells a package with the 3/4 wrap, double dogs, roller chain catcher and longer clutch cover and chip deflector. Ordered through my dealer $150ish with tax in Europe.
Ya Buckin' I run a 362" it's a great saw but I agree with you on it's drawbacks 100%. If your gonna pack that much weight might as well just go up a 70-90cc instead. The weight difference is insignificant, but the power and bar length is huge. Great review!
You make an excellent point regarding going with the 70CC saw versus the smaller 362. In the lieutenant's barn , the shortest bar now is a 24"!!!! Love you all..❤❤❤ Lieutenant Bradley
Ive run my 362 for a few years with a 25" bar and full chisel in mostly oak and ash. In stock form it will pull that pretty decently but after I put a Bark Box and a better air filter on the saw it really woke it up. I have considered putting a 32 or even a 36 on this saw with a half skip for some of the big trunks we see from time to time. Ive found as long as I keep the RPMs up on this saw, but will cut pretty good. But the most important thing, I know how to sharpen a chain. My Dad taught me how to file, but seeing some of the stuff Buckin does really changed how I sharpen now.
I have done a 32" full skip buried in oak and you are right it will cut reasonably well but I think that is all it wants. You can't stop in the middle of the cut and restart you have to lift it up off the bottom of the kerf a bit and get it spooled up before putting it back into the wood but let it self feed.
Hey Bucking and hello to the bucking army as well hope you all are having a great day today. Staying warm out there on this brisk fall afternoon be safe be happy and be kind everyone viking out.
Jeeze I didn’t even realize the camera work until Buck’n said something. Thank you Kevin! I say thank you because your camera work was so good, I was “sucked” into the video so much I don’t think I blinked one time in 10min😄 Your distance, focus, everything was better than most videos I’ve seen👍 Really good job…..I mean it😉 Thanks again 🙂
I ran a 346 for years and learned to have a spare oiler that I changed on the back of a pickup many times, great saw. Now I am getting into this long bar thing and I like it, but for a long while a 14 inch bar was all you could get, anything else had to be ordered in. With this hurricane damage I have been running bigger saws, everything goes faster, I like it. Our wood here is shorter and smaller in the plantations mostly because we are catering to pulp mills, species and conditions play a role too, but there is big wood out there in private wood lots I've cut 70 to 90 foot trees in Nova Scotia on private land, crown land has been cut over constantly, so you won't find it there.
I have run 28" bars for cutting fire wood for many years, last year I bought the same saw as yours with 28". IAM 6'2" tall with long arms standing upright with arms down in a comfortable position the bar tip just miss the ground. You'll love it
My MS362 definitely needed an upgraded oiler. I put a 461 oiler in it as soon as I bought it, because even a 0.050" gauge 16" bar and chain was overheating due to lack of oil in 12" oak. Now the oiler can be turned down a little with a 25" 0.063" gauge bar. That 362 you have looks like it has been ported and modified looking at the way it cuts. One of these days I may get mine ported. I really don't do a whole lot of cutting like you do. Keep up the great work and thanks for the video.
@@michaelluft2732 What is your oil used??? If you are using commercial super expensive tacky oil @$20/gallon, you are right. If on the other hand you are using cheaper less tacky bar oil from say... Walmart or free used oil, then no, you are not right. At ~$20/gallon of commercial bar oil, one has to be dumb to not use used(filtered) oil which is free. This necessitates opening up the oiler as it is less tacky. Especially in larger wood when bucking. Likewise more oil = longer lasting bars which are by themselves ~$100. For these reasons, I will only buy saws with ability to vary the oiler away from VERY expensive tacky commercial oil.
I’m actually approaching the point of ditching the 59cc 361 and going the next step up as a go to ground saw. I’m not convinced that it’s actually necessary. I think I may just want an excuse to buy a new saw, but realistically the difference you get in power for just a couple extra pounds is a big deal. I haven’t thought much about whether I stand or kneel more than the other. I’m not real tall, so a 20 inch bar does pretty well, and I can buck medium to small logs while standing. I actually buck starting on the side of the log typically with the top of the bar, and that’s how I learned to feel the tip. Best thing I ever did was watch Jacob Wolfinger buck some logs…watched and learned. Great stuff, Billy Ray
For what it's worth, a 462 or 500i have the best power to weight of any of the stihl saws. I've gotten to work with a 500i and they cut like a dream, snappy power. I still love my 661 though.
Hey Buckin' thanks for all the great advice! I just bought a used 272 with a 32" bar from guy who does saw and other small engine repair in Oregon. It should show up in about a week. I'm excited. Oh, and earlier today I bucked (with my little Stihl 250) a 16" tulip poplar that had wind fallen across a little ravine on the property. I used your wedge trick to get the two ends safely on the ground. Thank you!
Perhaps only Aussies will get this but I have a 362 and a 660 magnum. Up to about 20" the 362 is a fantastic grunty saw and I'm very happy with it. But a lot of Aussie hardwood trunks have very thick stringy bark that can overwhelm the lubricant available in the bar. It will just dry out and lock up. So that's when I use the 660. Never had the bar freeze up on me with the 660. I don't think there is anything wrong with the oil pump on the 362 but it does have its limits on Aussie timbers.
That sucks hitting steel in a tree. One time I cut right through a bullet that was stuck in the wood. Didnt do near the damage as steel. Thanks for another awsome video. Good day to everyone!!
I ran a 362 with 28 inch bar for wood and fire prevention up until I could no longer walk due to my spine. I grew up PNW and did some professional work as well. The extra length saves a lot of back if you have a working noodle. The issue with the late model 362’s oilers is that they WERE(don’t know if they still are) restricted. Most of the stock ones can be modified to run properly.
@@OOOOOO12345 its been a while and im on a few pain killers so work with me and check out some forums as well. From what I remember doing to mine you can drill out the “outlet” of the oiler. I picked a bit that was the same size as another one of my saws oilers. I think it was 1/16 larger. But do not quote me on that. And i cant remember if it was mine or another from around the same time but the screw head fit into the plastics with a keyed fit. So it physically kept you from going too low or too high. Meaning you can replace that screw or modify with a file/dremel so you can simply turn it further. Very similar to some you find on carb adjust screws. Also just to point out. They moved the lil screw from where you would assume. Its way in there. Good luck
I bought a brand new 362 wrap with 24” light bar, really nice saw, torquey for its size. Only down sides I see is the anti vibe and stringer handle aren’t as well designed as a husky especially the 500 series that I’m most used too. Oil and fuel holes tend to let in more debris too but that’s very minor.
10:40 I have a ms363c-m with a 25” bar and it oils more then needed when turned to max. I turned it down otherwise it’s just pissing extra oil right out the bar where it enters it. I have it 70-80% open and it works great for a 25”
Ding Ding... but commercial boys just pass the costs along to the customer as they are more worried about getting the job done without hurting anything in the yard while making things pretty again rather than trying to save $1-->$10 of oil.
Thanks for another great video, BBR! It’s a bright part of my day when we get a new video from ya! Cannot wait to run my 372xp with 24” bar! It’s my first saw… I’m a little late to the game at 46 yrs old, hahaha!
Run a 28” on my 372 Xp and a 24 inch bar on my 572 ...always stand up as much as possible and do lean into the knotty ones too...shake blocking for years makes for proficient bucking .I do a lot of the things you do but I still learn lots from watching you ..and I enjoy it...that’s what it is about ..your recent trip looked awesome ...Thanks for all you do there...cheers ...oh and here comes de rain...
Although it’s not a pro grade saw, my MS 390 Farm Boss has been a beast for my needs. I bought it used 7 years ago for $270. I replaced the bar and chain with a 20” Rollomatic, and a full chisel chain. I modded the muffler and raised the rpm limit 500 rpms to 13,500. It’s a 64cc, slightly more than the 59cc 360-362 saws. It’s a pound heavier than the 360-362 saws and holds a little less fuel, but it’s a damn good saw, and has given me years of great performance, cutting mostly locust, cherry, maple, and ash, here in western PA. Just saying that for those that can’t afford a prograde saw, the MS 390-391-392 is an excellent option. Probably would be capable of driving a 28” too, although modding the muffler or air intake might be in order.
Nice video. My dad and uncle both logged. I like to run a 28. It seems to fit me perfect. I have 33 inch and it just little to long for me. I never have understood people and these 20 inch bars. I totally agree a 70 cc is the best not to heavy but good power.
I recently bought the 400 (67cc), it’s a big bore 362. Anyway it came with a 20” bar and I have been debating on a 25 or 28. I hear that it doesn’t pull a 28” bar, but if you only use half the bar I don’t see why it wouldn’t. That’s a lot of money to spend to be disappointed, I may try to borrow a bar before I buy one. Thanks for all your help and experience you share.
I run a 28 inch bar on my 362 . On the 362 you can increase the amount of oil by removing a small cover under the saw and turning the screw . I would recommend turning it up for the 28 inch bar .the 20 inch bar that came on the saw oiled perfectly but when running the 28 inch bar it really needs to be turned up.
Awesome video Buckin, your right 100% I have a 661 with 28” bar and I feel a lot better in my back then using a 22” on my 372. Love the jack Nicholas moment mate 😂.
ridiculous sound kool to say i guess but nothing could be further from the truth. folk need to learn how to sharpen and operate the beautiful powersaws. leaning on them is just weird , and what for , there an old sayin' " let em cut'
I run a 361 and an 038 Mag. With the 361 wearing a 24" bar and the 038 wears a 30". Very noticeable weight difference but the newer 70cc saws are lighter than mine. Need to probably upgrade from 038 Mag to a 660/661 to pull that 30 in the mostly Maple, Ash, and Oak trees i cut. The power difference from 60 to 72cc's is surprising even on the older 038mag and really shows up in hard woods. I see the 361 as my big in tree saw where a few lbs especially for smaller guys like myself can add up. Ive had the 038 working out of bucket truck and its a pain to reach out far with.
Hey Buckin’ Thanks for sharing your information about the Stihl 362. Being a Stihl man I have been contemplating on whether I should buy a 362 or 462. Thank you for sharing your thoughts about the 362 and the advantages of running a 70 plus cc saw. I now know that spending the few extras dollars and getting 70 cc plus saw will be worth the extra cash. Stay safe, be kind and love always wins ❤️🌲🪵🪓
I run a 362 now and was considering going to a 462 as well since they stopped making the 461 which was a wonderful bulletproof saw. But then I saw they just came out with the MS400. Look into the MS400 first I think you will be pleasantly surprised.
alot of husky buddies are switching from the 562 to that saw... unrelated but found an old walters double bit axe, taken out of the ground from an old timers site today. Great find.
Hey BBR! love your content! I'm in Michigan along the the shores of Lake Michigan so conditions here are quite different my friend. I see videos and I have been to dozens of safety shows, conferences and field operations. There's always a speaker who was a victim of some sort of accident and they really get on the bandwagon about safety practices and PPE. "Don't do what I did", is always their message, often they were severely injured or maimed for life. I wish there were more SME's (subjects matter experts) who weren't victims, who followed safe practices, used their PPE and were diligent and good at their craft, not just lucky. Friend I see you wearing Chainsaw pants which is great, BUT I sure would like to see some eye and hearing protection. Please don't take this as criticism, as I think you're awesome and I've learned some great things through your channel. May God continue to bless you with provision and protection, grace, mercy and answered prayers! Safe in , Safe out brother!
Great video, but I saw one thing that really didn't like I'm a retired arborist and back in the '90s I was cutting up a big elm log with a 046 with a 32-in bar, Unlike you did at the beginning with no hand on the top of the saw, I did have a hand but my arm was not locked, about halfway through the log there was a big spike my chain hit it and kick it back and luckily for me that I had my hand on it it caught the chain break just as it cut me, went to the hospital and got 16 stitches so that's why I hate to see anybody cutting a log in that way ; because you don't know what's in there.
Loved a couple of 361's in my day. Smashed the first with a big madrone. Still have the second, but honestly have only pulled it out a handful of times since I've owned the 462. It's just better... pretty much everywhere.
You can adjust oil flow on some models of stihl on bottom there is a flat head screw with a E n a line showing which way to turn to increase or decrease oil flow for different size bars Mostly on the Pro series saws but some none pro's have them husqvarna has adjustable oilers to behind oiler plate there is a small screw number 1 to 4 to increase decrease the Timman has a video on his channel showing it not sure if all husqvarna have them or not
I have a 362 and agree on the weight. I guess if you can only have ONE saw it's probably the one to have. A 261 is way lighter, and the 461 etc, is much more powerful (I've owned both). Doing it again I would have sold the 362 and kept the 261, and picked up another 461 down the road. Live and learn I guess.
I agree, I have a 362 with a 20" bar and I think it is a gutless turd of a saw. I would rather have a lighter saw for limbing and a bigger saw for bucking that actually has some power. My 362 never fails to disappoint.
I own a 362 among many other saws both bigger and smaller. I agree that the 261 461 combo is pretty hard to beat but I still like my 362 for a all around saw. At work it's typically my go to saw as I can run one all day and it's big enough for what I typically run into but small enough it doesn't wear you out to terribly. It isn't as fun as my ported 046 or 660 but I don't get nowhere as much fatigue if running for extended amounts of time.
Actually the cutting is a great example of how old timers get complacent with safety. Holding the saw one-handed with no safety gear. "I've done this a thousand times!" Yeah, and on a thousand and one it kills you.
I’m currently hot rodding a ms290 with 390 barrel etc and hoping it will take a 25-28inch bar for exactly this ….. also most oilers can just be turned up to give more oil
Two years ago I was shopping for my first professional saw, for 4 days, I shopped and researched the MS362 and MS461... on day 5, I picked up(to the amazement of the stihl dealer staff)the MS661 with a 25" bar and bought a 32" bar the same day... I always thought the 661 was huge!! at 91cc...until I bought my MS880, 6 or so months later.... I wish I could post a picture in comments, where I hooked both saw on their tree spikes to the huge maple I took down(5 foot across at the cut point)... the 880 dwarfs the 661 so much.... I guess the moral of the story is, I have no problems standing up to buck with the 880 and her 36" bar.... the power head weight isn't as bad as one would think when rolling the bar into the log on the tree spikes... Thanks for all you do, showing and teaching the kraft and trade of tree work.. :)
Sometimes I run the 881 just for a body workout. I find that two three several hour outings with it and I don’t think of it as heavy and bulky anymore. When I go to pickup the 362 after it feels like a scalpel in my hands
@@Bredddi the 47" bar(that came with the 880) is a little too much for me, its the one bar that I dont use very often, but is noce knowing I have it for when needed... and for some reason, the 880 always seems to intimidate people when I get her out...I'll ask, " do you wanna take a turn with her"..." no, I'm good"... 🤷♂️🤷♂️🤷♂️
That was Music to my hears to hear about the myth about the Oiler. Just wanted to see what you could do with a 362. Another informative Video. Thanks Buckin. The Chainsaw Forums have everyone worried about the Oiler.
Love the 2 stroke crackle n brap. Gotta ask, seen it a few times when you shut off various saws, whats the purpose of holding the pull cord out 6-8in when shutting down?
I have many macs but I do truly love to run but as buckin would say there not the production saw. I have a 462 and I absolutely love to run it. I almost bought the 362 but sure glad I got the bigger saw. But I think I will be buying a 362 for more of a play saw
I have fallen and bucked about 16 cord of wood so far this year using a 460. If I remember correctly the 462 is a lighter version of the 460. Same power but with the weight of the 362. That to me seems like an ideal saw.
I run a husky 55 rancher with a 24" bar and Oregon exl full house, I'm only 5'8 so it's almost perfect for me. P.s I know it's not the greatest saw and it's not the only one I run but it's the one I enjoy the most because it was my dads
Just used my 362 with 28"bar to cut a tree outta the road. Big dirty pondy pine. She ate that thing no problem! I'll never go smaller then a 28" bar! Ever!
Buckin’ Billy - - - love your videos, and watch them a lot. You guys forget something regarding the 70+cc saws. For us older guys, particularly those with longtime, troublesome shoulder, or upper arm injuries, it’s VERY difficult, if not impossible for us to crank a 70cc saw. So, we use a smaller saw that we can handle - - rather than quit. I’m 80 years old, started running saws in 1953, when I was 10 - - - and I’m not ready to quit, so I use something in the mid-50cc range. Keep up the good work.
and that's exactly why I run a 32" bar on my MS 362 CARBURETED VERSION I also have a bark box on it, and a WC Saws Foam Air Filter.....I do run Full Skip Chisel Bit chain, and it RIPS !....I did buy the Stihl ES Light bar, which helps with the balance of the longer bar, and it's truely a joy to run.....I'm 75 now, and bending over is not much of an option any more ... I'm an old Orygun Faller and still enjoy the saws.....OnWard.....
Spot on my friend, my 362" is set up very similar and I love it. Been looking at the new MS400 as a nice upgrade in power but with nearly the same size an weight.
I have the 362 M tronic run the West Coast Bark Box and their air filtration system. I either run a 25” or a 20” due to cutting in tight places but all upright! I’m 63 and those days of bent over are long gone and it just doesn’t make sense for chains I run a full skip chisel sharp but I m always reaching for my 036 Pro as it’s way more torque to me.
This is a west coast mindset for sure. Ohio arborist that runs a 362, 461, and a 661 on the ground on a regular basis. I wouldn’t even think of putting longer than a 20” bar on my 362. I’ll run up to a 28 on the 461, but I’m not putting anything over 30” on any saw but the 661.
I’m curious as to why you capitalized “carbureted version”? Does the bar size make a difference on that particular model vs the m-tronic? I’ve been eyeing the 362 and/or 462 but am stuck on whether m-tonic is worth it or not. If I’m gonna spend money I wanna make sure I get the best bang for my buck and have the best setup.
@@rogerpowers3891 I recently bought some land and a new double wide that’s getting built. And I have never owned a chainsaw, now that I own a full wooded lot, I need one. I’m getting a carbureted model Stihl MS362, the main reason why is so I can tune the high speed and low speed needles my self. They are quick and easy to access, and it’s super easy. I have been back and forward all the time on the Mtronic models. I want to get an Mtronic, but look at the old saws in this video. Do you really want to go adding all these electronics to a chain saw? It’s another point of failure. I couldn’t find a consistent answer on Mtronic or non Mtronic. So I read the Stihl reviews on Stihl’s website, most of all the bad reviews “Very few bad reviews” are from people complaining about the Mtronic system. The chances are slim, but they are there. This saw MS362 saw brand new is like $900 bucks plus taxes. So $962 range out the door. We need it to just work and run without issues. I’d love to go Mtronic but I’m just not sure.
I have been away for awhile. Great to be back and see some good cutting techniques. Pretty refreshing.
Awesome video. In my area 50 to 60cc saws were the most common for firewood cutting with 16 inch bars, 20 inch bars were considered a long bar.
LOVE that p42 runs great,THANKS KEVIN YOU DID A GREAT JOB FILMING ,,HOPE EVERYONE IS HAVING A GOOD DAY
Billy Ray.. thank you man.. I have been watching and learning from a great teacher. Today I cut down 8 of my trees. I got them to fall where I needed them to go and I bucked them without killing my back. Best of all, I did a trick cut with a double wedge that rotated the tree on its base 90 degrees as it tipped and fell. That allowed the limbs to untangle from another tree and avoid powerlines..you are the best..
I got a 20" bar on my 362. Always loved it. I also got a 31" bar at home but never used it so far. I'll give it a try.
My mother in law always used long bars on her Husquvarnas, just for the benefit of standing upright. Well, I must admit it has its benefits. Greetings from the land of explosive trees.
P.S.: The oiler on my 362 runs the chain dry as a fart. With 20". I am upgrading it a piston from a 460 US model.
Hey Buckin', when I was growing up one of our neighbors who lived through the woods from us about 4 miles worked at the sawmill sawing logs. He was a big man, about 6'5'' and carried the biggest Stihl saw I had ever seen with a 5-6' bar on it! His name was Jesse Chriscoe ( he was a wonderful man like you). This was in the late '60's - early '70's. Almost everyone burned wood then and hardly anyone I knew had a saw with a 20'' bar. McCullochs and Homelites were the dominant saws! Great video and info! From Sophia, N.C. USA
im in randleman lol
I run this saw/bar combo at work(road commission), great for what I do. I really enjoy it, gets the job done. Thanks for all of you videos.
I recently picked up a mint 1st gen 362 (made in ~2010) for $250 bucks, looks brand new. Can’t wait to try it out now, good stuff Buckin.
I can’t even begin to explain how much watching ur videos has helped me. Recently started sawing and you’ve been a big help
Same here, a couple of years ago. Stay safe and keep learning!
right on ben
Billy great video , i started running saw when i was 12 i am 63 now and need a new hip and have had two back surgery's , but i still run saw because i love it , last year i got a husky 562 xp with a 24 in bar great saw i was running a 044 mag stihl with a 28 in bar before that , great advice on running a longer bar ,it will save your back and the more you can stand up and not have to bend over all the time the better ,i run saw in northern idaho . like you i always watch the tip of the saw . God bless
You're still one of my heros Buckin! Keep doing what you do!
I'm from Gilmer Texas and my dad and lots of friends around here use small bars just bought myself a 660 neo tec clone with a 36" bar and love it
Love my 362 and you guessed it 28 inch bar .saves my back.
Thanks billy ray!
You've given me a new perspective on sawing with longer bar with more power = stand up and save your back, I've been thinking about it all wrong with going light as possible with shorter bar
My heavens that P42 works great!..she sounds amazing!…I have a 362 and she’s a runner!..I have a 440 and she will hang with the 440 any day of the week!!
What do we have here... a professional cinematographer...WOW!
Buckin. As always your spot on with all the information. I thank you for everything you have taught me through this channel. Ive cut down trees that I normally wood have walked away from. But because of you and what I’ve learned I have made a few more stumps. Keep it coming. ❤
In this case he is not right with ALL his information regarding oiling. He is ~75% right about the oiler. If in large wood all the time, you need more oil otherwise the chain/bar load up with sawdust and JAMS and you have to continually clear it and likewise do not get oil to your tip bearing at end of bar causing heat/wear/jamming. Now 90% of everyone is NOT in large wood and never see this problem. This is essentially a bucking into firewood problem only in LARGE wood. Fallers will not see this problem. Likewise if you are in SMALL wood all the time, pouring expensive oil all over creation is also DUMB and a waste of $$$ and why you want to squeeze down your oiler on your larger saw if you know you will be running in a lot of small stuff. Most guys just have a smaller saw which comes from the factory... squeezed down and likewise never see this problem. Next point is if you use USED gear/transmission/engine oil(run it through a filter first). I do and therefore have to open my oiler up wider as it is LESS tacky than the commercial bar oil. Differences between transmission/engine oil necessitate this as well. But at ~$20/gallon oil currently, this saves a LOT of $$$.
@@w8stral Sounds like you need your own youtube channel. Maybe show Buck how to do it right...🙄
@@ArkansasBigFootBeats Let the world know when you wish to engage your brain. Otherwise enjoy flushing money down the drain on bar oil...
I do trail work so am regularly spend more time carrying a saw more than I cut with it. Many folks go with the 261 and an 18" bar for weight, but for me, I like the 362 with a 20". Definitely worth the extra pound or two when you hit those oaks that need double barring. I will often run a 28" on it for limbing and bucking for exactly the reasons you demonstrate. If I am not hiking, the 660 with a 36" is always fun to run.
How do you get involved with trail work?
@@everythingnerd7168 Depends on where you are at. I work with a hiking group called Carolina Mountain Club. But there are also groups for mountain bikers and horse back riders that do similiar work. I used to work for the US Forest Service so already had the sawyer certs so it was easy to jump in.
@@BenKickert I didnt even know they offered certifications. I am on the east coast but most of the trails I would volunteer on are national forest land. There is also a lot of state land around here. How do you get those certifications? I just looked at the usda and nwcg websites. I am a little confused now
@@everythingnerd7168 Call your local Forest Service ranger district and ask about volunteer trail work opportunities. My training and cert was done by USFS but is recognized for when I work on NPS land. But, I can only work on those public lands because the organization I volunteer with has an MOU with those agencies.
@@BenKickert Appreciate the advice. Thank you. I will do that
I’ve had a stock 362 for nearly 10 years, with full chisel chain it wouldn’t be any slower than that one. Definitely a fan of standing up to buck. 👍
I remember when I was a Wild land firefighter, I would help the sawyer. He would carry a MS 362 and it worked great. So that's what I bought, I have been using it since, Its a great saw.
You know I’ve never really given Stihl a chance but recently picked up a 361 and built a muffler for it. So far I’m extremely happy with it. Gotta get a 28” bar for it and really put it to work.
I have run this as my primary saw with a 28” thin Kerf cannon super mini bar for 8 years in hardwoods. It took me three years to track down a OEM wrap handle for it but I finally found one. I also did the bark box and wcs dogs on it. Been a great saw. For anything it can’t handle I run an 881 with a 41” bar. They say that the 362 has the highest power to weight ratio of any Stihl prior to the ms500… I believe it.
Look at the 400 cm. Great numbers.
the 261 has that claim, not the 362
@@andybayliss2020 good to know, Andy.
Did you get the longer clutch cover as well? Stihl sells a package with the 3/4 wrap, double dogs, roller chain catcher and longer clutch cover and chip deflector. Ordered through my dealer $150ish with tax in Europe.
Good to see you again Buckin' this one must be hot off the press. Love to all
Ya Buckin' I run a 362" it's a great saw but I agree with you on it's drawbacks 100%. If your gonna pack that much weight might as well just go up a 70-90cc instead. The weight difference is insignificant, but the power and bar length is huge. Great review!
fine i'll just get a 660, u convinced me
You make an excellent point regarding going with the 70CC saw versus the smaller 362. In the lieutenant's barn , the shortest bar now is a 24"!!!!
Love you all..❤❤❤
Lieutenant Bradley
Ive run my 362 for a few years with a 25" bar and full chisel in mostly oak and ash. In stock form it will pull that pretty decently but after I put a Bark Box and a better air filter on the saw it really woke it up. I have considered putting a 32 or even a 36 on this saw with a half skip for some of the big trunks we see from time to time. Ive found as long as I keep the RPMs up on this saw, but will cut pretty good.
But the most important thing, I know how to sharpen a chain. My Dad taught me how to file, but seeing some of the stuff Buckin does really changed how I sharpen now.
Yea the 362 likes rpm it’s not a torque monster. Mine doesn’t like the dogs much with a 25” full comp bar.
I have done a 32" full skip buried in oak and you are right it will cut reasonably well but I think that is all it wants. You can't stop in the middle of the cut and restart you have to lift it up off the bottom of the kerf a bit and get it spooled up before putting it back into the wood but let it self feed.
@@danielbenedict9236 That was my thought too. Just keep the revs up and let the saw self feed when you gotta run something that long.
I have a 291 Stihl chainsaw and I can cut through that stuff all day with no problems Great video enjoy watching them
Hey Bucking and hello to the bucking army as well hope you all are having a great day today. Staying warm out there on this brisk fall afternoon be safe be happy and be kind everyone viking out.
362 , my first stihl. bought it used and a little beat up. still a strong runner. she gets its done.
You're a legend BBR! Got me looking forward to my trip to Nanaimo early November. Rain or shine, she'll be beautiful!
Jeeze I didn’t even realize the camera work until Buck’n said something. Thank you Kevin! I say thank you because your camera work was so good, I was “sucked” into the video so much I don’t think I blinked one time in 10min😄 Your distance, focus, everything was better than most videos I’ve seen👍 Really good job…..I mean it😉 Thanks again 🙂
Correction on my spelling Buckin’
I ran a 346 for years and learned to have a spare oiler that I changed on the back of a pickup many times, great saw. Now I am getting into this long bar thing and I like it, but for a long while a 14 inch bar was all you could get, anything else had to be ordered in. With this hurricane damage I have been running bigger saws, everything goes faster, I like it. Our wood here is shorter and smaller in the plantations mostly because we are catering to pulp mills, species and conditions play a role too, but there is big wood out there in private wood lots I've cut 70 to 90 foot trees in Nova Scotia on private land, crown land has been cut over constantly, so you won't find it there.
Mr. Smith the commentary on oilers @10:30 through the 11:30 minute marks were very interesting. Mr. Kevin did a fine job with the camera work...
I learned better prep and handling compression from you and it's helped my firewood cuttin 💯 love ya brother!
I own a MS362c and love it for the small jobs I have to deal with. Just has a 20" bar which works fine for the
I have run 28" bars for cutting fire wood for many years, last year I bought the same saw as yours with 28". IAM 6'2" tall with long arms standing upright with arms down in a comfortable position the bar tip just miss the ground. You'll love it
Yes go for the longer bar especially with those size sticks, it will feel like you bought a brand new saw!
My MS362 definitely needed an upgraded oiler. I put a 461 oiler in it as soon as I bought it, because even a 0.050" gauge 16" bar and chain was overheating due to lack of oil in 12" oak. Now the oiler can be turned down a little with a 25" 0.063" gauge bar. That 362 you have looks like it has been ported and modified looking at the way it cuts. One of these days I may get mine ported. I really don't do a whole lot of cutting like you do. Keep up the great work and thanks for the video.
I have a stock ms362 cm I just bought with a 25 inch bar it oils fine
@@michaelluft2732 What is your oil used??? If you are using commercial super expensive tacky oil @$20/gallon, you are right. If on the other hand you are using cheaper less tacky bar oil from say... Walmart or free used oil, then no, you are not right. At ~$20/gallon of commercial bar oil, one has to be dumb to not use used(filtered) oil which is free. This necessitates opening up the oiler as it is less tacky. Especially in larger wood when bucking. Likewise more oil = longer lasting bars which are by themselves ~$100. For these reasons, I will only buy saws with ability to vary the oiler away from VERY expensive tacky commercial oil.
I’m actually approaching the point of ditching the 59cc 361 and going the next step up as a go to ground saw. I’m not convinced that it’s actually necessary. I think I may just want an excuse to buy a new saw, but realistically the difference you get in power for just a couple extra pounds is a big deal.
I haven’t thought much about whether I stand or kneel more than the other. I’m not real tall, so a 20 inch bar does pretty well, and I can buck medium to small logs while standing. I actually buck starting on the side of the log typically with the top of the bar, and that’s how I learned to feel the tip.
Best thing I ever did was watch Jacob Wolfinger buck some logs…watched and learned.
Great stuff, Billy Ray
For what it's worth, a 462 or 500i have the best power to weight of any of the stihl saws. I've gotten to work with a 500i and they cut like a dream, snappy power. I still love my 661 though.
Yes sir I need a bigger bar on the old sthil 044. 24 inch bar is small for it. Love the shows, and knowledge bud , keep it up.
Hey Buckin' thanks for all the great advice! I just bought a used 272 with a 32" bar from guy who does saw and other small engine repair in Oregon. It should show up in about a week. I'm excited. Oh, and earlier today I bucked (with my little Stihl 250) a 16" tulip poplar that had wind fallen across a little ravine on the property. I used your wedge trick to get the two ends safely on the ground. Thank you!
Perhaps only Aussies will get this but I have a 362 and a 660 magnum. Up to about 20" the 362 is a fantastic grunty saw and I'm very happy with it. But a lot of Aussie hardwood trunks have very thick stringy bark that can overwhelm the lubricant available in the bar. It will just dry out and lock up. So that's when I use the 660. Never had the bar freeze up on me with the 660.
I don't think there is anything wrong with the oil pump on the 362 but it does have its limits on Aussie timbers.
Similar combo mate, 362 and 395xp. Downsized the 362 to an 18"bar and turned oiler up to full
Hey Buckin', I'm learning a LOT from your videos. THANK YOU, FRIEND.
very welcome
Great video it’s a lot of fun ripping through that softwood
That sucks hitting steel in a tree. One time I cut right through a bullet that was stuck in the wood. Didnt do near the damage as steel. Thanks for another awsome video. Good day to everyone!!
hey david, i was cutting my fence row and hit a screw in tree step they use for deer hunting. that really stinks
@@browndawg5872 That would stink. You are probably lucky your chain didnt break. I figured that bullet was fired between 25 and 30 years ago.
I ran a 362 with 28 inch bar for wood and fire prevention up until I could no longer walk due to my spine. I grew up PNW and did some professional work as well. The extra length saves a lot of back if you have a working noodle.
The issue with the late model 362’s oilers is that they WERE(don’t know if they still are) restricted. Most of the stock ones can be modified to run properly.
How do you modify them?
@@OOOOOO12345 its been a while and im on a few pain killers so work with me and check out some forums as well.
From what I remember doing to mine you can drill out the “outlet” of the oiler. I picked a bit that was the same size as another one of my saws oilers. I think it was 1/16 larger. But do not quote me on that.
And i cant remember if it was mine or another from around the same time but the screw head fit into the plastics with a keyed fit. So it physically kept you from going too low or too high. Meaning you can replace that screw or modify with a file/dremel so you can simply turn it further. Very similar to some you find on carb adjust screws.
Also just to point out. They moved the lil screw from where you would assume. Its way in there.
Good luck
I bought a brand new 362 wrap with 24” light bar, really nice saw, torquey for its size. Only down sides I see is the anti vibe and stringer handle aren’t as well designed as a husky especially the 500 series that I’m most used too. Oil and fuel holes tend to let in more debris too but that’s very minor.
10:40 I have a ms363c-m with a 25” bar and it oils more then needed when turned to max. I turned it down otherwise it’s just pissing extra oil right out the bar where it enters it. I have it 70-80% open and it works great for a 25”
Ding Ding... but commercial boys just pass the costs along to the customer as they are more worried about getting the job done without hurting anything in the yard while making things pretty again rather than trying to save $1-->$10 of oil.
I like the 362 they did a lot of changes on that model now it’s good all the new Stihl’s are great good job buckin
This guy is probably the only person on TH-cam Ide take advice from he’s real with everything he says
Thanks for another great video, BBR! It’s a bright part of my day when we get a new video from ya! Cannot wait to run my 372xp with 24” bar! It’s my first saw… I’m a little late to the game at 46 yrs old, hahaha!
You got a heck of a starter saw!!!!
You'll get it bud. Doing firewood? Logging? Land clearing? Fun?
@@mattfleming86 Firewood, Fun and making blanks for woodturning. Also harvesting occasional green wood for carving spoons and utensils.
Wear the ppe. And, hang on!
@@markatkinson9963 hahaha yes indeed, sir!
Run a 28” on my 372 Xp and a 24 inch bar on my 572 ...always stand up as much as possible and do lean into the knotty ones too...shake blocking for years makes for proficient bucking .I do a lot of the things you do but I still learn lots from watching you ..and I enjoy it...that’s what it is about ..your recent trip looked awesome ...Thanks for all you do there...cheers ...oh and here comes de rain...
Although it’s not a pro grade saw, my MS 390 Farm Boss has been a beast for my needs. I bought it used 7 years ago for $270. I replaced the bar and chain with a 20” Rollomatic, and a full chisel chain. I modded the muffler and raised the rpm limit 500 rpms to 13,500. It’s a 64cc, slightly more than the 59cc 360-362 saws.
It’s a pound heavier than the 360-362 saws and holds a little less fuel, but it’s a damn good saw, and has given me years of great performance, cutting mostly locust, cherry, maple, and ash, here in western PA.
Just saying that for those that can’t afford a prograde saw, the MS 390-391-392 is an excellent option. Probably would be capable of driving a 28” too, although modding the muffler or air intake might be in order.
If you run a skip tooth on the 28" it'd probably pull it fine
390 is a great saw
Nice video. My dad and uncle both logged. I like to run a 28. It seems to fit me perfect. I have 33 inch and it just little to long for me. I never have understood people and these 20 inch bars. I totally agree a 70 cc is the best not to heavy but good power.
Like how those Pioneer's sound....they have a unique tone to them, kinda crisp sounding. Good video brother, lotsa love!
Thanks Buck'in! Great vid and message!
I needed this one Buckin! Im running the same saw!
Hahahaha me too. I actually watched the vid before this and commented exactly that. BBR said, "Tomorrow". Yes!
@@danr308 Yea man, I've been running a 25 inch on mine and have always been curious about a 28 inch!
So informative love learning from you and your experience m. Thanks so much. ⭐️✝️
I recently bought the 400 (67cc), it’s a big bore 362. Anyway it came with a 20” bar and I have been debating on a 25 or 28. I hear that it doesn’t pull a 28” bar, but if you only use half the bar I don’t see why it wouldn’t. That’s a lot of money to spend to be disappointed, I may try to borrow a bar before I buy one. Thanks for all your help and experience you share.
That's a lot of money to spend and not know Stihl rates that saw up to 25" bar. Many users cite a weak oiler.
How are you liking it? Did you ever get the 28?
I run a 28 inch bar on my 362 . On the 362 you can increase the amount of oil by removing a small cover under the saw and turning the screw . I would recommend turning it up for the 28 inch bar .the 20 inch bar that came on the saw oiled perfectly but when running the 28 inch bar it really needs to be turned up.
Awesome video Buckin, your right 100% I have a 661 with 28” bar and I feel a lot better in my back then using a 22” on my 372. Love the jack Nicholas moment mate 😂.
661? 28”? Put a 32”-36 on it. Or get a 572 husky. Why run such a short bar on a 94cc saw. I run a 28” skip on a mild ported 371 from 99
@@rhyssutherland8937 run a 28” as that’s all I need for it. These two saws are my main saws. Nice Rhys long as it does the job and your back ok 👌
Wow almost missed this one ☝️ Nice touch showing what to do to avoid a pinched saw when bucking.
Nice shots Kevin 👍
Keep em coming Billy, another awesome video.
I won something? THAT'S A FIRST!
I absolutely love my 362.
Dude! Thanks so much for the oiler comments! I have a 362 and that talk is what was stopping me from going to a 28".
ridiculous sound kool to say i guess but nothing could be further from the truth. folk need to learn how to sharpen and operate the beautiful powersaws. leaning on them is just weird , and what for , there an old sayin' " let em cut'
P42 65cc with reed valves 1983 was running very well.
I run a 361 and an 038 Mag. With the 361 wearing a 24" bar and the 038 wears a 30". Very noticeable weight difference but the newer 70cc saws are lighter than mine. Need to probably upgrade from 038 Mag to a 660/661 to pull that 30 in the mostly Maple, Ash, and Oak trees i cut. The power difference from 60 to 72cc's is surprising even on the older 038mag and really shows up in hard woods. I see the 361 as my big in tree saw where a few lbs especially for smaller guys like myself can add up. Ive had the 038 working out of bucket truck and its a pain to reach out far with.
Great camera work here! I especially liked the walk around of the top while you were bucking the limbs. Stay safe, brother!
Hey Buckin’
Thanks for sharing your information about the Stihl 362. Being a Stihl man I have been contemplating on whether I should buy a 362 or 462. Thank you for sharing your thoughts about the 362 and the advantages of running a 70 plus cc saw. I now know that spending the few extras dollars and getting 70 cc plus saw will be worth the extra cash.
Stay safe, be kind and love always wins ❤️🌲🪵🪓
362 definitely requires some extra feel to run at peak torque without bogging down stock with a+25" bar
I run a 362 now and was considering going to a 462 as well since they stopped making the 461 which was a wonderful bulletproof saw. But then I saw they just came out with the MS400. Look into the MS400 first I think you will be pleasantly surprised.
@@beebester4106 thanks for the information. I will definitely look into the 400.
Stay safe 🪓🪵
alot of husky buddies are switching from the 562 to that saw... unrelated but found an old walters double bit axe, taken out of the ground from an old timers site today. Great find.
That Stihl sure does look good in your hands.
Injoy your videos learning alot.
Stand up and Buck!!!! Love it
makes a lil sense eh
Yes it does I love your content and cant wait until you are back to 100% health stay the corse my friend
Loved the buck!
Hey BBR! love your content! I'm in Michigan along the the shores of Lake Michigan so conditions here are quite different my friend. I see videos and I have been to dozens of safety shows, conferences and field operations. There's always a speaker who was a victim of some sort of accident and they really get on the bandwagon about safety practices and PPE. "Don't do what I did", is always their message, often they were severely injured or maimed for life. I wish there were more SME's (subjects matter experts) who weren't victims, who followed safe practices, used their PPE and were diligent and good at their craft, not just lucky.
Friend I see you wearing Chainsaw pants which is great, BUT I sure would like to see some eye and hearing protection. Please don't take this as criticism, as I think you're awesome and I've learned some great things through your channel. May God continue to bless you with provision and protection, grace, mercy and answered prayers!
Safe in , Safe out brother!
"Maybe I'm just used to them" commenting on the p42 - I think so buckin haha👍
I love how your saws sound they are friggen dialed! Tuned so well! Should make a video on tuning them? Any recommendations on oil ratios or anything?
Cut alot of second growth timber in the 80’s with the ole pioneer. Good ole saws 💯
I love that p42 lol . Thing barks .
Great video, but I saw one thing that really didn't like I'm a retired arborist and back in the '90s I was cutting up a big elm log with a 046 with a 32-in bar, Unlike you did at the beginning with no hand on the top of the saw, I did have a hand but my arm was not locked, about halfway through the log there was a big spike my chain hit it and kick it back and luckily for me that I had my hand on it it caught the chain break just as it cut me, went to the hospital and got 16 stitches so that's why I hate to see anybody cutting a log in that way ; because you don't know what's in there.
Loved a couple of 361's in my day. Smashed the first with a big madrone. Still have the second, but honestly have only pulled it out a handful of times since I've owned the 462. It's just better... pretty much everywhere.
Yes!!!!
I have an old school 036 going strong after 24yrs
I have a 038 Magnum bought new in 1987 cut at least ten cord every year, just cleaned it up till next year .
great work
Kevin the cameraman !
That's cool you are blessing with the opportunity to win a price like this.
You can adjust oil flow on some models of stihl on bottom there is a flat head screw with a E n a line showing which way to turn to increase or decrease oil flow for different size bars
Mostly on the Pro series saws but some none pro's have them husqvarna has adjustable oilers to behind oiler plate there is a small screw number 1 to 4 to increase decrease the Timman has a video on his channel showing it not sure if all husqvarna have them or not
I have a 362 and agree on the weight. I guess if you can only have ONE saw it's probably the one to have. A 261 is way lighter, and the 461 etc, is much more powerful (I've owned both). Doing it again I would have sold the 362 and kept the 261, and picked up another 461 down the road. Live and learn I guess.
I agree, I have a 362 with a 20" bar and I think it is a gutless turd of a saw. I would rather have a lighter saw for limbing and a bigger saw for bucking that actually has some power. My 362 never fails to disappoint.
I own a 362 among many other saws both bigger and smaller. I agree that the 261 461 combo is pretty hard to beat but I still like my 362 for a all around saw. At work it's typically my go to saw as I can run one all day and it's big enough for what I typically run into but small enough it doesn't wear you out to terribly. It isn't as fun as my ported 046 or 660 but I don't get nowhere as much fatigue if running for extended amounts of time.
Camera work was A+. As was the cutting. ❤
Actually the cutting is a great example of how old timers get complacent with safety. Holding the saw one-handed with no safety gear. "I've done this a thousand times!" Yeah, and on a thousand and one it kills you.
No issues with oiling on my 036 running a 25" bar. The trick as always is to get a grind that is hungry on there so you don't have to apply pressure.
I’m currently hot rodding a ms290 with 390 barrel etc and hoping it will take a 25-28inch bar for exactly this ….. also most oilers can just be turned up to give more oil
That Jack Nicholson is spot on buddy!
i wonder how many caught it? Cheers!
@Adam Magyar" Nurse Ratchet" Cheers!
Two years ago I was shopping for my first professional saw, for 4 days, I shopped and researched the MS362 and MS461... on day 5, I picked up(to the amazement of the stihl dealer staff)the MS661 with a 25" bar and bought a 32" bar the same day... I always thought the 661 was huge!! at 91cc...until I bought my MS880, 6 or so months later.... I wish I could post a picture in comments, where I hooked both saw on their tree spikes to the huge maple I took down(5 foot across at the cut point)... the 880 dwarfs the 661 so much....
I guess the moral of the story is, I have no problems standing up to buck with the 880 and her 36" bar.... the power head weight isn't as bad as one would think when rolling the bar into the log on the tree spikes...
Thanks for all you do, showing and teaching the kraft and trade of tree work.. :)
Sometimes I run the 881 just for a body workout. I find that two three several hour outings with it and I don’t think of it as heavy and bulky anymore. When I go to pickup the 362 after it feels like a scalpel in my hands
@@Bredddi the 47" bar(that came with the 880) is a little too much for me, its the one bar that I dont use very often, but is noce knowing I have it for when needed... and for some reason, the 880 always seems to intimidate people when I get her out...I'll ask, " do you wanna take a turn with her"..." no, I'm good"... 🤷♂️🤷♂️🤷♂️
Your a class act Billy. Keep up the good fight
That's the saw I want with big cuts aloft. Yours runs way better then mine.
That was Music to my hears to hear about the myth about the Oiler. Just wanted to see what you could do with a 362. Another informative Video. Thanks Buckin.
The Chainsaw Forums have everyone worried about the Oiler.
Love the 2 stroke crackle n brap. Gotta ask, seen it a few times when you shut off various saws, whats the purpose of holding the pull cord out 6-8in when shutting down?
Homeowner crushing the camera work.
right yeah buddy
I have many macs but I do truly love to run but as buckin would say there not the production saw. I have a 462 and I absolutely love to run it. I almost bought the 362 but sure glad I got the bigger saw. But I think I will be buying a 362 for more of a play saw
I have fallen and bucked about 16 cord of wood so far this year using a 460. If I remember correctly the 462 is a lighter version of the 460. Same power but with the weight of the 362. That to me seems like an ideal saw.
I run a husky 55 rancher with a 24" bar and Oregon exl full house, I'm only 5'8 so it's almost perfect for me. P.s I know it's not the greatest saw and it's not the only one I run but it's the one I enjoy the most because it was my dads
Nice Camara work Kevin 👍✊
Just used my 362 with 28"bar to cut a tree outta the road. Big dirty pondy pine. She ate that thing no problem! I'll never go smaller then a 28" bar! Ever!