GP Kompozit Crash Bars | HONDA NC750X 2023

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ก.พ. 2025
  • Do GP Kompozit Crash Bars fit NC750X 2023? How easy or difficult is it to fit them. This video goes some way to answer these questions and there are one or two surprises on the way. Please do let me know in the comments if I have missed anything. Thanks for watching.

ความคิดเห็น • 17

  • @massimozanardi6457
    @massimozanardi6457 หลายเดือนก่อน +2

    Thank you. My 2024 will be delivered in a couple of weeks and you videos will come very handy. Now if I could find a video on how to mount the GP KOMPOZIT panniers rack, life would be perfect😁 thanks again.

    • @McBasharit
      @McBasharit  หลายเดือนก่อน

      No worries. Glad it was useful to you. Thanks for watching.

  • @abjem1
    @abjem1 6 หลายเดือนก่อน +1

    I just fitted the same bars to my 2019X and they look great! I had to temporarily move the clutch cable on the engine housing on the top right hand side bolt and be careful not to pinch the fuel line on the top left left! Dont lose the spacers on the 2019 version but otherwise it wasn't too difficult to fit!
    If you had used the spacer between the supplied nut and the top bracket you wouldn't have the gap at the top!

    • @McBasharit
      @McBasharit  6 หลายเดือนก่อน

      @abjem1 I am pretty sure I used all parts, including the spacer. Initially I wasn't sure which side the spacer would go, I installed it in the way I did but was never too confident if it was correct. I'll have another look.
      Thanks for watching the video, and I am really grateful for your comments. Safe riding.

  • @shareknowledge365
    @shareknowledge365 8 หลายเดือนก่อน +1

    Well done. I'm encouraged to buy these for my bike. I hope they would fit the 2024 year model

    • @McBasharit
      @McBasharit  8 หลายเดือนก่อน +1

      Thanks. As far as I know 2024 model is more or less the exact same as the 2023 model, different colour options depending on the region, but overall the same. So they should fit. If you are still in doubt, I suggest get a confirmation direct from GP Kompozit website. I believe they are a Turkish company. Good luck.

  • @MrMalik786AM
    @MrMalik786AM 8 หลายเดือนก่อน +2

    Maasha Allah!

  • @tyam6483
    @tyam6483 6 หลายเดือนก่อน +1

    How did those "sliders" work as highway pegs? Were they in good position for resting your feet? What is your height or inseam length? Were they long enough to support your foot?

    • @McBasharit
      @McBasharit  6 หลายเดือนก่อน

      @tyam6483 These sliders are not long enough to work as foot pegs and they are also very slippery. You may rest your feet for 30 seconds or so but can't expect anything more than that.

    • @tyam6483
      @tyam6483 6 หลายเดือนก่อน

      @@McBasharit Thanks for your prompt reply.

  • @Richard-dh8ny
    @Richard-dh8ny 7 หลายเดือนก่อน

    Great looking guards. I'm considering adding them to my to my 2022 NC750. My only concern is the strength of the sliders. Can you tell if there's any reinforcement of the section of the bar where the sliders are mounted?

    • @McBasharit
      @McBasharit  7 หลายเดือนก่อน

      @Richard-dh8ny I think the sliders are more of a show piece. I didn't note any strengthening. Bars are solid though👍

    • @Richard-dh8ny
      @Richard-dh8ny 7 หลายเดือนก่อน +1

      Excellent, hope you never need to put them to the test. :) One last question, how comfortable is it to place your feet on the sliders? In any case you now have many options for mounting real highway pegs.

  • @SmokeyES350
    @SmokeyES350 5 หลายเดือนก่อน +1

    How did you remove the 4engine mount bolts that hold the crash bars in place??? I cannot get them off at all ive tried everything

    • @McBasharit
      @McBasharit  5 หลายเดือนก่อน

      @SmokeyES350 you will need a socket size that fits the bolt, a socket bar, which is then attached to the rachet. Make sure you have the tools because you do not want to mess up the bolt head with the wrong tools. Of course, they are tight because they hold the engine. Good luck.

  • @davehalliday6657
    @davehalliday6657 6 หลายเดือนก่อน +1

    Do they fit the nc750x dct

    • @McBasharit
      @McBasharit  6 หลายเดือนก่อน +1

      @@davehalliday6657 I have fitted the bars on NC750x.