Volvo 940 Aftermarket Radio Installation

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ต.ค. 2024

ความคิดเห็น • 19

  • @johnveroutsos
    @johnveroutsos 5 ปีที่แล้ว +1

    Thank you Robert Deptula. Very informative and useful. I have a 1992 Volvo 960 and I want to upgrade to a better sound system too. I have all the same connectors in my car as yours and this really helps me a lot. Thank you so very much!!

  • @stanf7862
    @stanf7862 3 ปีที่แล้ว +1

    All the wires are not in same place in these connectors, , been there. But this did help thank you.

  • @danielcostache
    @danielcostache 4 ปีที่แล้ว

    Thank you very much for taking the time to make and share this video. It is a great help.

  • @chazbganster
    @chazbganster 4 ปีที่แล้ว +1

    Hi - does anyone have a specific link to the DIN speaker plug? I bought one on crutchfield that plugged perfectly but did not work. Thanks for the vid!!

  • @andrewpeterkin4510
    @andrewpeterkin4510 2 ปีที่แล้ว +1

    I have a 1990 Volvo 760GLE. It only has a 6 speaker system, 2 on the dash top, 2 on the front doors and 2 on the rear doors. I have completely removed the Power Amplifier and plan to use it for another project in my home. I also plan to remove the 2 front door speakers to use with my project. (The Sanyo radio that I got from Crutchfield years ago only supported 4 speakers.) I do not have a schematic diagram. I hope I can glean from your 940 diagram and hoping that Volvo followed a similar wiring convention. This Amplifier is Labeled:" VOLVO 1384914-4969 Japan 9011". I am questioning as to how this works,: A 12volt signal when applied to the middle pin 6 of the DIN plug will signal the Amplifier to turn on. (Amplifier power being always present on pins 11 and 4 of the flat connector designated as 16/2. And I would imaging that pins 1,3,4 and 5 on the DIN connector are for Right and Left audio channel input to the Amplifier. Your comments I will appreciate, Thanks.

    • @robertdeptula2003
      @robertdeptula2003  2 ปีที่แล้ว

      I don't have any other diagram besides the one in the video.

  • @stevendwoodruff
    @stevendwoodruff 2 ปีที่แล้ว

    For the amplifier plug adapter there are four rca plugs and six points on the adapter. How does this work?

    • @robertdeptula2003
      @robertdeptula2003  2 ปีที่แล้ว

      At 5:58 you have all connections provided for the plug.

  • @danielcostache
    @danielcostache 4 ปีที่แล้ว

    By any chance, do you remember where you got the trim around the radio? Thanks.

    • @robertdeptula2003
      @robertdeptula2003  4 ปีที่แล้ว +1

      I used the trim that was already there from the Volvo CR-718 radio.

    • @danielcostache
      @danielcostache 4 ปีที่แล้ว

      @@robertdeptula2003 I see, my Cr-184 radio trim does not come apart like the Cr-718, so I am stuck with a bit less attractive adapter plate. Thank you for the clarification.

    • @robertdeptula2003
      @robertdeptula2003  4 ปีที่แล้ว +1

      You are welcome.
      Try junkyards, it should cost less than universal trims that are usually more expensive than the radio itself.
      Good luck!

  • @ChristopherBurtraw
    @ChristopherBurtraw 4 ปีที่แล้ว

    Robert, where did you find the amplifier signal to RCA adapter cable

    • @robertdeptula2003
      @robertdeptula2003  4 ปีที่แล้ว

      abra-electronics.com/ but I went there in person.

    • @ChristopherBurtraw
      @ChristopherBurtraw 4 ปีที่แล้ว

      @@robertdeptula2003 thank you! I was able to find it on eBay by changing the terms used for search.

    • @stanf7862
      @stanf7862 3 ปีที่แล้ว

      @@ChristopherBurtraw Please let me know what you typed in to find the plug on ebay and did it work ? thanks