How to drill hinge hinge holes in kitchen doors - Kitchen Warehouse UK LTD

A quick simple video tutorial howing how we drill our kitchen doors with the hinge drilling kit to fit standard 35mm Kitchen Hinges.
See more at:
Website: kitchenwarehouseltd.com
Facebook: / kitchenwarehouseltd
Twitter: / kitchenukltd

[@Kitchenwarehouseltd]

Hi Everyone! Thanks for watching, we just want to reiterate that the methods we are using a specific to our doors and measurements, you may find that your carcass measurements are different. I hope that the underlying technique helps with drilling. We do not sell the jig we are using directly as these are bundled with our kitchen doors.

[@bilalshahidkiyani817]

REALLY REALLY WELL DONE MATE. BY WATCHING THIS VIDEO I REALLY REALLY DO FEEL LIKE WORKING AS A KITCHEN FITTER I REALLY REALLY DO MATE. WORK CAN BE CHALLENGING AT TIMES BUT I REALLY REALLY LOVE DING CHALLENGING STUFF LIKE FITTING A KITCHEN AND OTHER STUFF AS WELL. AND ALSO IF I WORK AS A KITCHEN FITTER I CAN GET LOTS AND LOTS OF EXPERIENCE AS WELL

[@cabsandy]

Cheers for the videos, very informative.Also the one on the hinges was very helpful as well-most seem to go for the Blum ones but these ones seem just as good, but cheaper-and don't have the part on the top, as the piston is concealed?

[@TheEulerID]

Probably not recommended to do this on a kitchen worktop given a mistake on depth won't just ruin the door, but the worktop underneath...

[@Kitchenwarehouseltd]

Hi Steve sorry for the repl a few years after the original comment! Yes definetly drill into a scrap board. We are in our workshop here hence the worktop looking a bit worse for wear.

[@futurecarslondon1109]

Very Clever. Thanks

[@killiandunford9352]

that's a great video. well done.

[@MrDBSV8]

using a drill bit with an adjustable depth bar would prevent you drilling too deep

[@rickyrajive6666]

good video, but how to measure , install and adjust the plate on the frame thanks

[@sultanmehmood1726]

Nice kindly send the name of coy of this drilling machine and tool

[@freddythefrog70]

Can anyone help, ive bought a new base unit but the pre drilled holes are in the wrong place? Is there any east way of fitting them correctly? Makes it more difficult because the old base were 12mm but the new one is 18mm.
Shocked all aren't a standard setting.

[@Kitchenwarehouseltd]

Its difficult as if the holes are already drilled in the door the only other thing you could change is where the holes are drilled to take the crucible (part that goes on the unit)

[@diyeric4114]

I received my measuring blue
Jig, from kitchen warehouse UK, but in this video it shows Daniel using a piece of wood which is attached to the blue jig which means hinge will go 2mm further into the door ,do I attach a piece of wood or just use the blue jig ,

[@valkyrie4644]

The 35mm hinge hole cutter I have keeps bursting through the side of door destroying the panel, is it the melamine chipboard or should I try a softer chipboard

[@IamYourMaster1]

Please I need that kit. And I need it for yesterday. I haven't seen it anywhere online.

[@IamYourMaster1]

Or just that jig

[@Kitchenwarehouseltd]

Hi JN, if you contact us online or via email one of the team will be able to get you one posted out. [e-mail] www.kitchenwarehouseltd.com

[@phillipbaker2237]

do you sell the jigs...I need one

[@joseprotaciomanalo2659]

where to buy the hinge drilling kit?

[@Kitchenwarehouseltd]

Hinge drilling kits generally come free with our replacement doors, If you are only looking to buy a hinge kit you would be best to visit your local diy store and look for a 35mm hinge hole cutter.

[@dinosauraccounts1411]

cost?

[@RaulLopez-ke7be]

is this full overlap or half overlap?

[@Kitchenwarehouseltd]

Hi Raul, These are full overlay hinges we use

[@dunbustin]

The door for the built-in washing machine is just a cupboard door. It has holes but they are in the wrong places!

[@SureshKumar-hl1zl]

Krishna

[@shivarajukumar596]

.

[@trevordawson1947]

Thınk IF I bought one of your kıtchens, I would expect the doors to be pre drılled.Pretty poor advertisement.

[@Kitchenwarehouseltd]

Hi Trevor, These are mainly for people who are buying replacement doors. This is so your can drill your new doors to suit the previous crucible holes on your carcases. On full kitchens, we would always drill for our carcases so they can go straight on. There are also times when drilling the door needs to be done on site, the following link should demonstrate why. Many Thanks. th-cam.com/video/UxVsIn7_-lw/w-d-xo.html

[@echoinnovationltd4759]

the worktop looks ruined, do it in the shed on workbench not your kitchen worktop

[@Kitchenwarehouseltd]

Sorry for the reply a few years after the original comment! Yes definetly drill into a scrap board. We are in our workshop here hence the worktop looking a bit worse for wear.

[@janski30]

Doing this on the work surface is criminal poor practice. Got a thumbs down from me.

[@jas2819]

It's only a demo, for goodness sake. 🙁