Being a single mum living in a rental, this has been super helpful, thank you for your easy to follow instructions on how to fix the "holes" as yes....... my son leaned on the door and ripped it off making big holes inside the cupboard.
My father showed me 60 years ago how to solve this problem. Remove screw. Take a fireplace wooden match's and and fill the hole and break off. I have used this also on 80" solid core door hinges also and it works like a charm.
Really helpful. Solid information to attain more lasting repairs. Hadn’t thought of the masonry plugs in wood or more difficult material like particle board or MDF. Thanks!
Never thought of using Bondo for that application. Also never heard of touch-up paint for melamine. I'll need to look into that. Finally a reason to not (TOTALLY) hate particle board cabinets. Thanks.
Excellent no-nonsense video that moves along at a good pace. I hadn't thought of using masonry wall plugs on laminate cupboards before but I had a few wooden dowels lying around. Fortunately they fitted perfectly into the worn screw-holes (after a bit of persuasion with a hammer) and the hinges on my kitchen cupboard now work perfectly. I've since taken your advice and bought a small pack of assorted masonry plugs so that I'm well prepared for any future loose hinges which don't have perfectly dowel-sized holes. Thanks for taking the time and trouble to post this video.
One word of warning. If tapping a plug, dowel or anything else into a blind hole using a hammer in particle board, make absolutely sure that it's supported firmly on the opposite side or there is a significant danger of busting through and wrecking the laminate on the other side as there's often only a couple of millimetres of material. It's done properly here, but I can imagine some circumstances, such as using the same technique on the side of a cabinet, where this might not be the case and then you have to be very careful.
Great video, thank you. Our oldest daughter and family purchased a home with a huge kitchen bar area that has several doors not attached so this will help me make the necessary repairs. Our son in-law works quite a bit.
Good suggestions. Some hinges have those big fat screws. I used some of those plastic inserts used for license plates and they worked great. I just used a drill bit just smaller than the insert and tapped them in with a hammer and voilà! Hope that helps someone else! Thanks for the great tutorials!
Hi Bill, great tips there mate. Can you please do a video on how to fix a sagging corner cabinet door (the one with 2 panels joined by piano hinge. Thanks
Nice tips. if you don't have larger screws or anchors laying around you can also put a few toothpicks in the enlarged holes with a little glue, trim to length and just go right back in with your screw.....works for hinges on full size doors as well.
Much better solution than wall plugs. Hinges are subject to substantial movement and stress. Similarly 2 part filler is brittle when it sets and don't take too kindly to threads.
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? ( part : 1/2 ) [โกงไหมครับ ep.89 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
![How to fit concealed (Euro-style) hinges for overlay & inset cabinet doors [video # 348]](/img/n.gif)
Being a single mum living in a rental, this has been super helpful, thank you for your easy to follow instructions on how to fix the "holes" as yes....... my son leaned on the door and ripped it off making big holes inside the cupboard.
That mix and scrape technique is truly ASMR 👨🏻🎨✨
The third option was exactly what I was looking for! Thank you ❤
Thank you so much! Can't believe we lived with loose hinges for three years. Tonight I can sleep so well!
Superglue and cornflour….it’s instant and rock solid. You can drill and screw it easily and it’s white!
Genius!!!
Superglue and saw dust. Won’t decompose when wet or attract rodents.
My father showed me 60 years ago how to solve this problem. Remove screw. Take a fireplace wooden match's and and fill the hole and break off. I have used this also on 80" solid core door hinges also and it works like a charm.
Thanks for showing and explaining and not adding fluff.
You’re welcome 👍
best vid on repairing the chipboard. THANK YOU !!!
Bill is the ultimate arsenal to have at your fingertips!!!
Thankyou, Bill. Much appreciated.
Thanks Bill. You're like the Handyman Dad I never had!
You’re welcome 👍
I’ve used no more nails along with the thin dowels. It’s worked a treat for me on the doors that I’ve repaired.
Top man. I had this problem to solve...and you provided the exact solution (grade 8, 16mm screws). Cheers man.
Such good description of process.
The first two examples were known to me, but I'm glad of the third example.
Great work, dude!
Glad you enjoyed it 👍
Great information! I was able to fix my cabinet door by myself. Thank you!!
You’re welcome 👍
thanks, good simple advice all and in my case the third I trust will solve the problem. Now I just need to do some shopping for suitable filler
Thanks from the Netherlands
Really helpful. Solid information to attain more lasting repairs. Hadn’t thought of the masonry plugs in wood or more difficult material like particle board or MDF. Thanks!
Agree. I also fond the masonry plug suggestion to be a great tip.
EDIT: Not to mention using a utility blade to trim it.
Never thought of using Bondo for that application. Also never heard of touch-up paint for melamine. I'll need to look into that. Finally a reason to not (TOTALLY) hate particle board cabinets. Thanks.
Off to fix my daughters wardrobe! Thank you 👍🏻👌🏻
Excellent no-nonsense video that moves along at a good pace. I hadn't thought of using masonry wall plugs on laminate cupboards before but I had a few wooden dowels lying around. Fortunately they fitted perfectly into the worn screw-holes (after a bit of persuasion with a hammer) and the hinges on my kitchen cupboard now work perfectly.
I've since taken your advice and bought a small pack of assorted masonry plugs so that I'm well prepared for any future loose hinges which don't have perfectly dowel-sized holes. Thanks for taking the time and trouble to post this video.
The use of plugs is brilliant. Explains why I didn’t think of it myself. Ha!
Gr8 demo of the 3 fixes... !!!!
One word of warning. If tapping a plug, dowel or anything else into a blind hole using a hammer in particle board, make absolutely sure that it's supported firmly on the opposite side or there is a significant danger of busting through and wrecking the laminate on the other side as there's often only a couple of millimetres of material. It's done properly here, but I can imagine some circumstances, such as using the same technique on the side of a cabinet, where this might not be the case and then you have to be very careful.
Thanks for this! You just saved me having to get a whole new cabinet door.
Very helpful thank you!
Very nice job with the patching and painting!! I am very impressed!
Great video, I have all three examples in my kitchen right now
Never hesitate to give a like before watching video, confident the advice will be helpful.
👍👍
Thank you, method 2 worked for me.
Excellent fixes shown, for a annoying problem and very well presented
Fantastic vid with nice straightforward explanation. Thanks heaps mate!
👍
Champion welldone. Good tips and video. Thanks.
Thank you very much, really nicely presented info.
Great video, thank you. Our oldest daughter and family purchased a home with a huge kitchen bar area that has several doors not attached so this will help me make the necessary repairs. Our son in-law works quite a bit.
VERY good! I like the plugs too
the very job i need to do. terrific- thanks.
I find your handy hints and repair tricks very helpful. Keep them coming 👍
👍
Thank you! I'm going to try this out!
Thanks for this video bro! This is going to be the easiest $180 I’ve ever made on AirTasker 👍
Very helpful! Many thanks!
Bill brilliant solutions to a common problem nice work. Cheers.
Glad I can help 👍👍
Really good thanks mate
Beautifull , thank you very much .
Thanks for the useful tips ! …. Well done.
Good suggestions. Some hinges have those big fat screws. I used some of those plastic inserts used for license plates and they worked great. I just used a drill bit just smaller than the insert and tapped them in with a hammer and voilà! Hope that helps someone else! Thanks for the great tutorials!
I used wood filings from my electric pencil sharpener to fix my grate grandsons wardrobe mixed with glue worked well 👍
Hi Bill , another beautiful idea and smart way l love it . Thank you Bill 😊👍
👍👍👍👍👍👍👍👍👍👍👍👍
Nothing will give you wings but a 7 eleven $1 buck coffee!! 😆Great tips Bill. God Bless ya bud
Lol , god bless us all 👍
Thanks for the tips.
👍
Thank you. Super helpful advice. Greatly appreciated 🙏
Great tips Bill 👍🏻
👍
As always, another awesome video.
Glad you enjoyed it 👍👍👍
very good video thank you a lot !
Bill is the goat fixed the cabinet door. Now wife is happy and my reward is some sugar sugar 😊
Nice tips. I did try polyfilla with one similar to the third one which cracked over time. Adhesive filler was needed.
👍👍👍
Thank you!
Very handy tips...Thank u👍
You’re welcome 👍
Well presented. Good job!
Useful.Thanks.🎉
Thank you the 3rd idea was good 👍 thank you for uploading vedios they do help a lot
Hi Bill. So glad I came accross your channel. Your videos are so relevant and its so easy ti follow the instructions. You are a champion!
Glad you’re enjoying the videos 👍👍👍
Love it, Bill. Thank you. Yes, I always learn something from your videos.
Very helpful. Thanks for ur videos.
You’re welcome 👍
I have a cupboard doing that the hinge has come loose. Thanks for the video!
You’re very welcome 👍
that is a good one Bill, i use epoxy resin but i think the glue you have is better
👍👍👍
Great tips!!! 😍😍😍👏👏👏
Wow wasy fix. Thanks.
Thanks
Excellent!
Very helpfull. I will try
Always good tips 👌 thanks
👍👍👍
Brilliant tip👍👍👍👍👍
👍👍👍👍
Great tips very helpful video thanks Bill 👍👍👍
👍👍👍
Great video
Great tips why didn’t I think of that
Thank you
Soo usefull, thanks
Nice one Bill
My hero!
Thank you.
you saved my day
Much appreciated
This is brilliant Bill ! Keep up the videos. Love it
thanks mate
excellent video
👍
Brilliant.
Really great info, thank you.
Hi Bill, great tips there mate. Can you please do a video on how to fix a sagging corner cabinet door (the one with 2 panels joined by piano hinge. Thanks
Next time I come across one 👍👍👍
Great video billy nice tips and a nice saying "better then brand new" 👍
Super strong 👍👍👍 💪
Superb!!
Very helpful! Great hints!
Very helpful
Useful.
Thanks.
excellent
Excellent video bro!
Awesome 👌 brother.
Nice tips. if you don't have larger screws or anchors laying around you can also put a few toothpicks in the enlarged holes with a little glue, trim to length and just go right back in with your screw.....works for hinges on full size doors as well.
👍
Much better solution than wall plugs. Hinges are subject to substantial movement and stress. Similarly 2 part filler is brittle when it sets and don't take too kindly to threads.
Great Great!
Love your videos, always looking forward to when you put new ones out. Keep up the good work!