Interesting to see one built up from parts. Thanks for the video. You might want to turn your master link around, you put it on backwards 🙂 That wrap really makes it!
The linkage being upside down is pretty common. Would have liked to see more of the wiring harness install (dc to dc converter...etc) process. Mainly because there are a couple of connectors I'm a little unclear about. But great vid either way.
Thank you! I do have a build version of this build that I talk and say every part before I put it on and I went over the power system in it that I could post! Or I can aslo take everything out and make a detailed version going over it +install if that helps more
In the meantime I do have a quick little short of me going over everything in the power system while it was outside of the surron for better look that should be helpful on my TikTok (22-23 videos down)!
Thank you! And I actually haven’t tired the bike out yet hopefully will this weekend! they do feel like good quality but I haven’t tried them yet to have a opinion
@@electric_things_ loving the Talaria. I ride it almost daily on trails near my house. So fun. I upgraded the wheels and tires and next up is the suspension.
Do you have any like old Surron parts because im building a Surron from the litteral ground up im wielding a frame ect but im not really at the spot right now to afford parts to buy the electronics and I was wondering if u could send me some parts? ❤❤❤
I bought it when it was a stock Segwayx260! But I agree a fresh scratch build is a vibe, I got my parts from warp 9,ext racing and surronshop is the only place I know you could find a frame and odd plastic piece for a complete scratch build. I was going to buy another frame but honestly better just to buy a cheap used one and sell the old parts imo
Could have been cheaper if it wasn’t a Segwayx260 with a surron power train in it but with the trailer and stand included it’s right about 17k! Sadly still need to trow like 5k+ before she’s finished though
@@electric_things_ i was planning on doing a full surron build but i saw that the parts seperately bought would cost me a lot more than just buying one of the China versions, either way im dropping 2689$ for a fully built surron with a 60v40ah battery, but im 100% going to drop another 5k or more (hopefully less) and get a 72v or higher volt battery with a more powerful motor
@ yea I’m with you on that iv looked into building one from scratch and its definitely better to get the cheapest built one you can or even on ksl or Facebook marketplace and sell the stock parts or use them for different project!
@@electric_things_ thanks, im thinking to ride the normal battery untill it doesn't last even a mile then ill upgrade it to a 80v one with the sotion motor for triple the power. This is going to be my first build ever (not really a build since im just replacing components but still).
Is the hub in that warp 16” rim different from OEM hub? Because I got VMX racing 16 inch rear rim and my chain rubs the rear tire. Its hub is just like OEM. Just got non o ring chain and some spacers fir the rear sprocket and now the chain is almost cleared… need to find 1mm more from somewhere still… if nothing else I need to cut some knobs from the michelin star cross tire…
Yea it’s a wrap 9 hub that i got it all together as like a plug and play kit, wrap9 makes their surron hubs specially designed to be spaced over to have clearance for big dirt bike tires like yours or my tusk tires! Definitely would try to use spacers rather then cutting your traction making for a uneven ride might not be to noticeable but would be annoying if you could tell
Yea with stock power the 16inch rear wheel feels great, handles a lot better in the dirt and I didn’t feel anything to noticeable when I switched. Then this also used to be a Segway x260 but I switched the battery and controller to the new 2023 surron 34amp battery and wave controller witch was like a 1200watt upgrade+range, then I have a 20% power booster for little more acceleration and it feels great with that. Could still use 72v power!
@@electric_things_ I did a full light kit on mine... no problems after a few years. headlight is 3 X brighter , and the tail light is brighter, + turn and side ring lights. I stressed about it taking to many watts but no prob. cant remember what the total Watt consumption was...
Hey can you help me with info on the wolf tooth headset, I have a talaria and water gets in my bearings and its just not good. What do I need to do to get a headset like that
@@electric_things_ No i have not. Just keep water away from the area. and i just cant over tigthen it or its hard to move. it already doesnt move as freely as it should
Thank you! I have had this bike for 2 years now and have learned from TH-cam fixing anything that broke but learned a lot taking it apart and rebuilding it up for this video
@@electric_things_ heck yea that’s wassup bro, I plan on getting mines in February. I can’t wait. Im riding in the streets I just don’t want no problems with the police tho so I might get pedals like a nerd 🤓 lol
@@bigballa8220 nice their definitely worth it imo👌the pedal kit would definitely be smart if the cops care where your at! Lucky the cops haven’t messed with me so haven’t needed it yet lol
Yea I definitely agree I regret it little but with the wrap and new parts you only notice it on top swing arm! But I want all my blacks and everything to match and I still have a couple parts I need so I’m saving the color theme when I have everything!
@@deankruse-fx4qpI did start with a Segway x260 frame but upgraded basically everything including the bolts so it’s definitely possible to order everything including the main frame, does seem cheaper to go the used x160 rout though! Can send some good websites iv looked into pricing and what website I would need to build one with ordering the frame!
@@electric_things_I'm highly interested to see what frames and parts u saw online thinking about building me one as well. If u got a list of the parts available on websites I'd be super grateful.
So this was a complete Segwayx260 so I already had the main frame and wire harnesses but everything els I got from warp9 website along with ext racing and couple odd things from surronshop! I can help direct you in the right place if you’re looking for something pacific!
I ordered it off of warp 9s website! Forgot what the company that makes them is called but they make atv and other wraps but wrap 9 has a good selection of their wraps
Full version of this build with talking is posted!
Yo this was huge help rebuilding my sons with him. Big thanks!
Thank you I’m glade it helped!🤟 I aslo have a longer detailed one if you haven’t see that one it would help even more!
Interesting to see one built up from parts. Thanks for the video. You might want to turn your master link around, you put it on backwards 🙂 That wrap really makes it!
Aww that’s why it fell off lol didn’t even think about that,good to know! And thanks man appreciate it!
this is so sweet, looks sick
Thanks man!
Beautiful build my dude keep up the good work.
Thanks man I appreciate it!
The linkage being upside down is pretty common. Would have liked to see more of the wiring harness install (dc to dc converter...etc) process. Mainly because there are a couple of connectors I'm a little unclear about. But great vid either way.
Thank you! I do have a build version of this build that I talk and say every part before I put it on and I went over the power system in it that I could post! Or I can aslo take everything out and make a detailed version going over it +install if that helps more
In the meantime I do have a quick little short of me going over everything in the power system while it was outside of the surron for better look that should be helpful on my TikTok (22-23 videos down)!
Good job, I wish I could be your close friend, but it’s good to watch your videos , keep it up.
Hey thanks bro i appreciate you!
I may be wrong but I thing you put your chain lock key thing on backwards. Nice build.
Hey thank you! Your definitely right chain fell off super quick didn’t know that was a thing just been getting lucky putting it on right😂
Nice build. Now for 72v, ps the backwards linkage in the beginning was a bit funny and was a nice edit cut.
Thank you definitely time for 72v! And haha that’s when I realized I was doing something wrong😂
smooth and clean!
Thank you!⚡️
nice job dude👍
Thank you!
Killer bike! How are you liking the new fork and suspension? Considering getting the same for my Talaria. A pretty penny but apparently big upgrade.
Thank you! And I actually haven’t tired the bike out yet hopefully will this weekend! they do feel like good quality but I haven’t tried them yet to have a opinion
How are you liking the talaria?
@@electric_things_ loving the Talaria. I ride it almost daily on trails near my house. So fun. I upgraded the wheels and tires and next up is the suspension.
That Aviator song has me on edge. But nice stuff
Thank you! Do you think it would be better without the song or just a better one?
youre really missing out not having a torp tc 500 and an upgraded battery but start with the controller first
Yea I agree definitely will end up getting on eventually! Just looked up torp tc controller and that looks nice definitely a good upgrade
Was this the way you purchased it? If Soo how much was it ?
It wasn’t everything was stock on the Segwayx260 when I got it! But I’m in it $17k with the stand and trailer
Do you have any like old Surron parts because im building a Surron from the litteral ground up im wielding a frame ect but im not really at the spot right now to afford parts to buy the electronics and I was wondering if u could send me some parts? ❤❤❤
Where to buy parts please...im new to this
can put the url of the products?
pls
ngl you should've powder coated it while it was just a frame
But he didn’t powder coat it
Yee I’m saving it for round 2!
why would you lie? stop saying dumb shit
@@stereolababylol me?
@@electric_things_ you didn't say ngl
Where did you get the parts from or did you buy it like that? Cause I love buying parts and building from scratch
I bought it when it was a stock Segwayx260! But I agree a fresh scratch build is a vibe, I got my parts from warp 9,ext racing and surronshop is the only place I know you could find a frame and odd plastic piece for a complete scratch build. I was going to buy another frame but honestly better just to buy a cheap used one and sell the old parts imo
How much did this build cost you?
Could have been cheaper if it wasn’t a Segwayx260 with a surron power train in it but with the trailer and stand included it’s right about 17k! Sadly still need to trow like 5k+ before she’s finished though
@@electric_things_ i was planning on doing a full surron build but i saw that the parts seperately bought would cost me a lot more than just buying one of the China versions, either way im dropping 2689$ for a fully built surron with a 60v40ah battery, but im 100% going to drop another 5k or more (hopefully less) and get a 72v or higher volt battery with a more powerful motor
@ yea I’m with you on that iv looked into building one from scratch and its definitely better to get the cheapest built one you can or even on ksl or Facebook marketplace and sell the stock parts or use them for different project!
@ and nice you’ll definitely like it their a blast to ride!
@@electric_things_ thanks, im thinking to ride the normal battery untill it doesn't last even a mile then ill upgrade it to a 80v one with the sotion motor for triple the power. This is going to be my first build ever (not really a build since im just replacing components but still).
Is the hub in that warp 16” rim different from OEM hub? Because I got VMX racing 16 inch rear rim and my chain rubs the rear tire. Its hub is just like OEM. Just got non o ring chain and some spacers fir the rear sprocket and now the chain is almost cleared… need to find 1mm more from somewhere still… if nothing else I need to cut some knobs from the michelin star cross tire…
Yea it’s a wrap 9 hub that i got it all together as like a plug and play kit, wrap9 makes their surron hubs specially designed to be spaced over to have clearance for big dirt bike tires like yours or my tusk tires! Definitely would try to use spacers rather then cutting your traction making for a uneven ride might not be to noticeable but would be annoying if you could tell
How loud is this warp drive chain conversion kit?
It’s definitely louder then the belt but compared to the other brand it sounds pretty good, and 8:03 has little of what it sounds like
Send it to me now i want it more.
Stock battery and controller? How is it with the big rear wheel - is it enough power?
Yea with stock power the 16inch rear wheel feels great, handles a lot better in the dirt and I didn’t feel anything to noticeable when I switched. Then this also used to be a Segway x260 but I switched the battery and controller to the new 2023 surron 34amp battery and wave controller witch was like a 1200watt upgrade+range, then I have a 20% power booster for little more acceleration and it feels great with that. Could still use 72v power!
@@electric_things_no need to buy 72v, if you want capacity and power buy some 60v 60ah
What is the back tire
Their tusk emx tm35 soft terrain tires and it’s a warp 9 back rim/hub to be able to run that tire
do you know hoy many watts i can get from the 12v line? for a new lights... sorry for my bad english
I’m actually not sure on that!
@@electric_things_ I did a full light kit on mine... no problems after a few years. headlight is 3 X brighter , and the tail light is brighter, + turn and side ring lights.
I stressed about it taking to many watts but no prob. cant remember what the total Watt consumption was...
Hey can you help me with info on the wolf tooth headset, I have a talaria and water gets in my bearings and its just not good. What do I need to do to get a headset like that
Have you figured out your water issue yet? I’ll have to take a look at my bike to see what it would take!
@@electric_things_ No i have not. Just keep water away from the area. and i just cant over tigthen it or its hard to move. it already doesnt move as freely as it should
Sweet vid, I wish I knew how to build a bike. How long did it take for you to learn about all of this?
Thank you! I have had this bike for 2 years now and have learned from TH-cam fixing anything that broke but learned a lot taking it apart and rebuilding it up for this video
@@electric_things_ heck yea that’s wassup bro, I plan on getting mines in February. I can’t wait. Im riding in the streets I just don’t want no problems with the police tho so I might get pedals like a nerd 🤓 lol
@@bigballa8220 nice their definitely worth it imo👌the pedal kit would definitely be smart if the cops care where your at! Lucky the cops haven’t messed with me so haven’t needed it yet lol
The moment he realized that he put the linkage the wrong way😂
@@BGCH96706 my math was not mathing😂
You should have took the time to paint the bike when it was gutted
Yea I definitely agree I regret it little but with the wrap and new parts you only notice it on top swing arm! But I want all my blacks and everything to match and I still have a couple parts I need so I’m saving the color theme when I have everything!
howd you get all the parts and screws (i wanna build one)
Mainly just ordered it all from 3 websites!
@@electric_things_ you got every single piece online even the many frame parts! I need to know wich sites
@@deankruse-fx4qpI did start with a Segway x260 frame but upgraded basically everything including the bolts so it’s definitely possible to order everything including the main frame, does seem cheaper to go the used x160 rout though! Can send some good websites iv looked into pricing and what website I would need to build one with ordering the frame!
@@electric_things_I'm highly interested to see what frames and parts u saw online thinking about building me one as well. If u got a list of the parts available on websites I'd be super grateful.
Forreal bro you are dope help us out with some links I really wanna build one
🤟
🤟🤟
Where’s the powder coat ma boi
Saving it for round 2 along with the 72v power!
mad
Madly sexy😏
@@electric_things_ true
Ima pick up a second hand surron this week.
Can’t wait
where did you bought the parts from?
So this was a complete Segwayx260 so I already had the main frame and wire harnesses but everything els I got from warp9 website along with ext racing and couple odd things from surronshop! I can help direct you in the right place if you’re looking for something pacific!
Hahah u bought a complete Surron in parts except the frame 😅
Haha fr though sad part is it still needs a surron amount of money thrown at it still😅
where did you get the graphics from
I ordered it off of warp 9s website! Forgot what the company that makes them is called but they make atv and other wraps but wrap 9 has a good selection of their wraps