HOW TO: Fit a Chain Conversion Kit to your Sur-Ron Lightbee
ฝัง
- เผยแพร่เมื่อ 29 ม.ค. 2021
- The first of our How-To videos.
The Sur-Ron Lightbee Chain Conversion Kit replaces the Primary Drive Belt and Pulleys.
In this video, we'll show you how to replace the belts and pulleys letting you know what tools and torque settings we used.
You will need the Sur-Ron Axle Removal Tool...available on our website:
- www.surronsouth.co.uk/sur-ron... - ยานยนต์และพาหนะ
This is so clear and concise. it answered a lot of questions for me. Excellent!
Now THIS is how you make an instructional video! Really great job, thanks!
Thank you guys~
You have done such a good job making the video.
It will be a very good help for the future.
Thanks a lot and keep up the good job :)
Glad you liked it!
Great video
Thanks for the video. It was very helpful. Got my 420 chain on and I feel way more secure offroad. I had a rock go through my stock belt in the first couple hundred miles of owning the bike. I mostly offroad gnarly trails so the chain was an important upgrade for me. It is so freaking loud though! I heard a lot of people say it was loud but it is seriously as loud as a motorcycle at certain speeds. Thanks again.
how hard was this to do??
@@blakehegemann It was a bit of work. Nothing too crazy though. I’d say if your decent with mechanical stuff it is definitely doable. Most of it was easy and straight forward but there were a couple tricky parts of the project that just took a little patience and persistence. Getting the swing arm back on was the hardest part for me since I was doing it alone and didn’t have an extra set of hands. I’m decent with mechanical stuff and have a bit of experience but no expert. Hope that helps.
Nice video !
Very clear thank you
I'm getting my kit next week so this video is going to be really helpful. Thanks! Do you know the dimensions of the swing arm axel bolt? I'd like to replace it with an allen head bolt.
hi,how is the electric part ( motor -batary-controler-censores ) doing after a couple of thousend miles ???
What size are the flywheel puller and castle socket? At 258
I'm at my wits end trying to get the swingarm and intermediate shaft assembly back into the chassis. That special temporary bolt/shaft you made would be a wonderful item to get this done. Any chance you have that for sale? :). Actually, for us in the states, looks like a 3/8" dowel rod will work (9.9mm)
Yep, it's just a rod. We used metal rod that fit. Not sure if other materials would be suitable as they might break inside.
9:40 im missing the part that goes inside that hole where can I get one?
So My Motor Pully Basically Fell Off Without Any Effort 😅 Is That Good ?
You’ve made it look so easy been trying to do mine for 3 hours n still not even done
dont worry I just got this and like 3 minutes in im like how the fuck am I going to install it,, maybe in a couple of months but right now just nah lol
professional work! I would like to ask why you always say, for example, between 20 - 25 nm instead of saying the exact prescribed nm. What brand is your torque wrench? Thanks
We go on what is mentioned in the Sur-Ron technical documents.
👌👌👌
The rod used to hold the jackshaft was replaced with a 12" clamp, flexing the swing arm enough to grab the jackshaft.
Eyyy first comment and I'm the voiceover guy 👉😎 👉
Thanks voiceover guy...
good job!
How do you remove the nut from the motor pulley? Just keeps spinning for me.
You got to do that when the chain or the belt is still on. Once you remove the motor you're screwed
@@FreeMissionsi have my chain and belt on and it still wont come off how did you get yours off?
@@axeljoe4371i’ve heard it’s super easy with an impact gun i am doing mine right now and i can’t get it off with a normal tool so i’m going to try an impact gun and it should come off easy
@@bigjohnson69 u right tbh the only real way to do it is with an impact gun or it just will keep spinning.
@@axeljoe4371 my attempt failed with the impact gun so im going ot try and find a shop that can do it for me
Don't know but i think youbhave been loosing the nut for the motor pulli earlier, ornist it just the hammer drill tool?.Man why is it not spinning, you already took the chain off, whats it holding? Cant get the shit back together, gant get the nut loose. Could be so easy to make it loose as a step 1 😭
Sna mag ruon ako ng ganyan. Pra s work k
Dont take the swingarm off! Just pull the jackshaft out it is much looser than the swingarm and much easier to put in and out.