2007 - 2012 Nissan Altima 2.5L CVT Transmission - Fluid & Filter Service Guide! FULL Walk-Through!
ฝัง
- เผยแพร่เมื่อ 17 ก.ค. 2024
- BEWARE!!! The number of bolt holes for your transmission pan may be different!!! There are TWO different types of pans for these CVTs! So double check and count the number of bolts your pan has and order the correct gasket. Here are the links between the two:
19 Bolt Gasket & Filter - www.autozone.com/filters-and-...
18 Bolt Gasket & Filter - amzn.to/3rFmIAw
Welcome to the Trick Shift Garage! In this video, we go step-by-step to show how to change the transmission fluid and filter on our 2007 Nissan Altima with a 2.5 liter engine. This Nissan CVT transmission is known as JF011E or RE0F10A. There are TWO different types of pans for these CVTs. So double-check and count the number of bolts your pan has to order the correct gasket! This video shows how to drain the fluid (including some models that have a drain plug while others may not) and replace the mesh filter located inside the transmission pan. If yours doesn't have a drain plug, you will have to drop the pan and allow all the fluid to drain (have to drop the pan anyway so not a huge deal) other than that, the process is the same between these variations. Don't forget to verify which gasket you need because there are 2 different types!
This process can be applied for the following vehicles:
2007 - 2012 Nissan Altima w/ 2.5 L
2008 - 2016 Nissan Rogue w/ 2.5 L
2014 - 2015 Nissan Rogue Select w/ 2.5 L
2011 - 2016 Nissan Juke w/ 1.6 L
2013 - 2016 Nissan NV200 w/ 2.0 L
Amazon items to consider:
Castrol CVT Transmission Fluid (1 quart) - amzn.to/30ywGtU
Castrol CVT Transmission Fluid (1 Gallon = 4 quarts) - amzn.to/3ytYj3R
1/4" Drive Torque Wrench - amzn.to/3FVFGYG
3/8" Drive Torque Wrench - amzn.to/3E3Kkmm
Drain Pan - amzn.to/3E0MUcX
Shop Rags - amzn.to/3e3OBv3
Shop Towels - amzn.to/3mRx0dG
Brake Cleaner - amzn.to/3uyr8vT
Video Gear:
DJI Osmo Mobile 3 - amzn.to/32mHI39
GoPro Hero 7 Black - amzn.to/2U4mcvh
62" Camera Tripod - amzn.to/2JNEnne
GoPro Single Suction Mount - amzn.to/3kbbzl3
GoPro Three-Arm Suction Mount - amzn.to/3k6ke8h
Music:
"Lazy Aftermoon" by | e s c p | escp-music.bandcamp.com
Music promoted by www.free-stock-music.com
Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/...
"Eternal Springtime" by | e s c p | escp-music.bandcamp.com
Music promoted by www.free-stock-music.com
Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/...
As an Amazon Associate, we earn from qualifying purchases.
We get commissions for purchases made through links in this post.
Disclaimer:
Trick Shift Garage hosts are DIY (Do IT Yourself), not mechanics. Due to factors beyond the control of Trick Shift Garage, we cannot guarantee against improper use or unauthorized modifications of this information. Trick Shift Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Trick Shift Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Trick Shift Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Trick Shift Garage.
#nissan #cvt #fluid - ยานยนต์และพาหนะ
I've owned this car for 4 year's, 50,000 miles and was told that i couldn't CHECK the transmission fluid..
Thank you for teaching me how...
You're welcome, glad to help out! Thanks for watching and leaving a comment 🙂
The most work I've ever done to my car has been driving it to a mechanic, but this video gave me the confidence to replace the pan, fluid, and filter on my 200k mile Altima. Thanks a lot.
Best example of a complete transmission oil change I have seen. Thanks!
You're very welcome, thanks for watching Eric! 🙂
That is what I needed to because I did not know the torque specs. I don't want to strip anything and have problems. I also never had the pan off one of these and I fear leaks.
Yes, they are pretty simple to do. The only tricky part is keeping the gasket on top of the pan when you're trying to put it back on. Just takes some patience and persistence but you'll get it on. The torque specs for the Altimas bolts is 70 inch-pounds (5.8 foot-pounds) but I don't know what it is for the Rogue. I'd call a Nissan service/parts place and ask if they can help. Hope this helps!
Thank you it was very helpful 😊
Wow ! The quality of this video, which is awesome, is as good as your descriptions of the task, Thank you!
Thanks Guy! Appreciate it and thanks for watching! 😁
Thank you! You made a worried Mom a confident Mom! My son learned so much from your videos! Thank you
That's awesome! Thanks for watching and taking the time to comment! 🤟
Excellent Job and Video. You had all the torque specs and variations of pans. Thank you!
You're welcome Mark! Thanks for watching! 👍
Thanks for this great video! the dealership is charging me a fortune for this work that i can now do myself!
You're welcome Fernando! Glad you like it. Thanks for watching! 👍
You make absolutely fantastic content! It's almost hilarious you do it for free man😅
Thanks for this! You're good! I'm having this done right now as l watch you. I'll know what questions to ask when complete.😎👍
You're welcome! Hope everything went well! 😎👍
Excellent videos! Thank you for all the help!
Anytime! Thanks for watching! 🤟
Thanks a lot for this video! A bit of work, but it's gonna save us a bit on the $200+ dollars the mechanic wants to do this service!
Awesome video, was very helpful!
Glad it was helpful Mitchell. Thanks for watching! 👍
Lots of detail - thanks!
You're welcome! Thanks for watching! 👍
Super detailed thanks man 👍
You're welcome and thanks for watching James!
Thank you so much for this informative video❤
You're welcome! Thanks for watching Denise! ❤️
Nice video and demonstration
Thanks for watching Kiko! 👍
Awesome video good description 👍 thankyou
You're welcome, thanks for watching!👍
Great video helped a lot
Glad it helped! Thanks for watching 👍
Thanks for your video. ❤
You're welcome and thanks for watching! ❤️
I am about to do this on my 2012 - so I get the hard job without the plug. Hope it works or it will be headed to the trans shop! Thank you for the video
You're welcome! If you have any questions let us know! 😎
UPDATE: Pour 5 Quarts (NOT 6!) first when refilling with CVT Fluid, then check the fluid level and add more if needed!
2007 - 2008 and 2010 - 2012 Altimas with the 2.5L should have drain plugs! Easy-Peasy! 😉
If you have a 2009 model you'll have to drop the pan to get the fluid out. So sorry 😔
Yup you was about to get the your wrong buddy. Lmao embarrassed to say but I accidentally pulled the plug on my gf trans fluid on her 2012 bc I've never seen a drain plug on a trans and I was doing a quick oil change.
🤣🤣🤣 I almost did that, the first time I did an oil change on her. Loosened it and started seeing red fluid and was like OOOPS! Thanks for watching Daniel! 👍
Wouldn't I need to take the pan if I need to replace the filter? Or is replacing filter not that necessary? I have a 2007 Altima and am looking to do this.
Sweet! I gotta '07 Altima too! And yes, you'll have to remove the pan in order to replace the filter. Thanks for watching! 👍
i have a question when you said thigh up 70 inch pound that confuse me a lot.
Great Vid 👍
Thank you! And thanks for watching! 👍
A very very good video 👍🏻100
Thanks for watching! 👍
First off thanks for great vids.Ultimately,these 2009 altima cvt transmission’s have 2 filters?? Yeah? Thanks,Cheers!!
Yep! They have 2! The cartridge filter and the regular filter that all other transmissions have. Thanks for watching! 🤟
Hello! Thank you so much for taking the time to demonstrate how to replace everything step by step!! You're amazing!!!! I love all of your videos!! I do have one question, (anyone is welcome to answer please!, thank you!)
I have a 2007 Nissan Altima and ever since I purchased the vehicle she has never gotten a transmission change. Due to it being a cvt trans, is it best if I change the trans. fluid little by little so that my trans. will get accustomed to the new fluid or is it best to change all in one sitting?
I ask because I read incidents where a transmission will have a slight chance failing due to a fluid replacement.
Hi Nidia! Thank you so much for watching our videos. I'm glad it helps you maintain that Altima!
I think you should drain the fluid completely then drive it around for at least one month and drain the fluid again. Doing two fluid drains should get most of the old fluid out. If your Altima has the 2.5 liter, it should come with a drain plug which makes it much easier compared to unbolting the pan. I went almost 200k miles without changing my fluid and did this and have had zero issues with my CVT. If you have any other questions just let me know, thanks again for your support! 🙂👍
@@TrickShiftGarage still no problem for your gear till now ?
There is a chance of that happening on high mileage transmissions that've never had the fluid changed.
What happens is even though the transmission has a filter in it they only filter down to a certain size, with a high mileage transmissions there can be just enough metal in the fluid to help old clutch plates grip each other, by putting new fluid in you're losing that little bit of traction from the microscopic size bits of metal that old clutch plates need to help grip each other and your transmission will start slipping.
That being said the fact is if your clutch plates are that close to going out it wouldn't have been long anyways, so it's not like changing the fluid in a perfectly fine transmission will ruin one, if it happens it wasn't long for the world anyways.
Thanks!
You're very welcome!
It is also recommended to check all the bolts for the valve body to make sure they torque down because they loosen up overtime
I'll be sure to check them on the next fluid and filter change. Thanks for watching and commenting! 😊
NICE VIDEO MAN! i have a question how many liters it takes to fill up? and you didnt change the another filter of the transmision ?the cartrige one that goes in the front. cheers!
Thanks Luis! I would start with 5 quarts which is about 4.7 liters and then measure with the dipstick, add a quarter liter at a time until you get to full.
Lol, yeah I didn't know that cartridge filter even existed until after I did this video. I did change it though you can find that video right here:
th-cam.com/video/sZK0ob6KT1Y/w-d-xo.html
Thanks for watching! 👍
Do I check the transmission fluid while the car is running?
Good video and good camera work. Just curious if you really put 6 quarts in? Did it run ok? I may have slightly overfilled at around 5.5.
Thank you! Yes, mine took 6 quarts. I've heard from some viewers that it's causing them to overfill. So I suggest starting at 5 and checking the fluid level as you go. As long as it's in between the two notches your good! Hope this helps.
@@TrickShiftGarage Mine took 6 and took it about 60-70% up the dipstick mark lines.
My friend has 2012 Nissan Altima 2.5 and it has transmission drain plug
is it the same process for 2010 Altima hybrid? Thanks!!
Last video I watched the guy only used 5 quarts cvt fluid and it was full. But he only did a drain, didnt drop the pan. And temp needed to be at 160 degrees to accurately check level ??
Put a couple dabs of RTV on it and let it sit for a couple minutes it will help the gasket stay in place and then you don’t have to worry about it
That's a great idea! Thanks for the tip! 👍
Great tutorial! Unfortunately the sump filter housing was rusted so I broke one of the four bolts, I’m really hoping it doesn’t leak and that maybe it’ll be fine with 3 bolts on, I didn’t have any gasket maker so I used the same one it had since the box didn’t come with one
Excellent video. One thing I question is my 2012 Altima has a drain plug in the pan. You state that 2012 do not. I have 140K on the clock and I’m about to do this for the first time.
Hi Kevin! Yes, you're correct! I'll have to pin a comment to correct this mistake. Thanks for checking into it!
So, 2010 - 2012's do have a drain plug on the CVT pans. It was only 2009 models that didn't (I believe).
That being said, if you have a drain plug, you just need to loosen it (19 mm), let the fluid drain out, and tighten the drain plug to 25 ft lbs. If you want to change your filter, definitely drain the fluid before dropping the pan, makes it alot easier. Thanks again for bringing this to my attention! 🙂👍
@@TrickShiftGarageI have a 2011 and it does not have the drain plug. I thought it did and attempted this last weekend thinking it did. But I abandoned that and bought some more things to help me with attempt #2 tomorrow. Wish me luck
Good luck! Let us know how it goes 👍
My son has a 2008 Nissan Altima manual shift and we can't get it into gear. Is it a Fluid problem because I know it needs to be changed, A solenoid problem. I think it's a neutral but when I released the clutch pedal it wants to move.
I really like your videos
Thanks John
Hi John, thanks for commenting. Wish I had a manual clutch Altima, those are rare! That being said, I'm not sure what's going on exactly. I would drain the gear oil out and fill it with some fresh gear oil, that may clear up your issue, plus it wouldn't hurt to change it either way. I'd also check over the shifter linkage/ mechanism. Make sure the everything is moving freely and nothing is blocking it's travel path. Also, look into the clutch linkage, and make sure it's not low on clutch fluid. Sorry that my experience with manuals is pretty limited but these are some things you can check out that may help you. Thanks for watching! 👍
Is there no overfill drain plug? I have a 2017 Altima and it was recommended to fill and check fluid through the overfill hole. Also, what is the fluid capacity of doing a complete filter change and fill? Do you have the Nissan spec or did you just put back in what came out?
My 2007 Altima doesn't have an overfill drain plug, but I did find this TH-cam short that shows one for your 2017 Altima, it's right at the end of the video. Hope this helps! Thanks for watching 👍
I have a 2008 Altima and no drain plug. 19 bolt pattern
Hello, I really enjoyed your video. So I have a question please. I have a Nissan altima 2008 2.5 sedan, sometimes when I drive 100 km hours on the highway for a long time the engine engine causes it to stop and when I try to accelerate there is like a jumping and after stopping the engine completely 10 minutes later the engine returns to normal. And sometimes while driving I expect whistling. So please I really need your opinion do you think I should go and change the transmission oil and filter. Because Nissan had put me a new transmission 4 years ago now. Thanks
Hello! Thanks for reaching out. How many kilometers have you driven in the 4 years since you had gotten the new transmission from Nissan?
I'm wondering if you could possibly help me figure out how to replace solenoid A in a 2008 Altima? I'm so lost. My daughter just bought this car and it threw a code P0745. Can you possibly help me? We're going to have to fix it ourselves because she doesn't have the kind of money to take it to a shop.
Have you ever changed the fluid before? I have 2012 Altima 168,000 miles and never changed it. Thinking of changing it soon would you recommend it?
Honestly, I haven't changed it before until now. I should have changed it earlier because the transmission seems to be performing better now that I've driven it around. I recommend that you change the fluid and filter since you probably have to drop the pan anyway.
I might have posted this same comment somewhere else (but cant find it). My altima's at 185k with no fluid or filter changes. Always heard that waiting this long, I'd be better off not doing it at all due to possible slippage that could occur. In your vid, you indicated you're at 200k. Any issues with fresh fluid? I know these CVT's can be a bit tricky
Hi, yeah, I've heard of that too. I've had no issues with the CVT since changing the fluid and filter. It does feel like it "shits" better since changing the fluid. CVTs are very sensitive to high temperatures so changing the fluid is important. If you have any other questions just let us know! Thanks for watching Hawk! 🙂
Is this the same for an 08 rogue 2.5 awd?
That was awesome. Do you have to do anything to the rim (clean it with any chemical etc) before the new gasket goes in?
Thanks Ray! No, you don't have to. I just wiped mine down and it was already clean. Make sure there's no dirt or remnants of the old gasket left on, as that would mess with the new gasket sealing properly. You could spray some brake cleaner into a clean rag and wipe it down if you want it to be really clean. Thanks for watching! 👍
good work but i recommand Nissan CVT fluid
Can't go wrong there Hassam! Thanks for watching! 👍
I have a 12 and out pans look the same
I have a 2008 with no drain bolt. Little more messy but already done it a few times no prob
Ah ok, it's like Nissan said lets include half of the transmissions with drain bolts and the other half (of owners) can kick rocks! 😂
@@TrickShiftGarage lol exactly. Makes no sense. I have to say I won't buy another Nissan
I don't blame you one bit lol
I have the 2009 Altima w/146,000 miles. Every 6 months (3-4k miles) I syphon a quart of transmission fluid out from the dipstick opening then add a new quart. Only takes 10 minutes. May be right, may be wrong but my car continuously has old fluid flushed out and a new quart put back in every 6 months...
Thanks for your comment. That's certainly one way to do it! It's understandable that by continually doing that every 6 months the old fluid gets slowly pulled out and new fluid put in. Eventually, the internal mesh filter will need to be replaced, and you'll know how to do it with our video! Haha! 😎
@@TrickShiftGarage Oh yeah, I know but who knows how long I'll keep the car and it's running/shifting fine currently. Maybe when/if I hit 200,000 I'll drop the pan and replace the filter. Being in my 50s crawling under the car isn't as easy as it once was...lol. Good instructional video either way!
Thank
Thanks for watching and taking the time to comment! 🤟
Good❤
does it matter which type of cvt fluid you use? i read in the owners manual that you need a certain type that you have to buy from the dealer but i was wondering theres any difference between using that and the cvt fluid that you used
Yes, the type matters. This CVT requires the NS-2 type. As far as whether to buy Nissan's fluid or go with Castrol or any other brand doesn't matter. As long as the fluid is compatible with NS-2 you'll be fine. The reason I went with Castrol was money. Nissan charges crazy prices for the NS-2 fluid, while Castrol is much cheaper and gets the job done. 😉
For my 2010 Altima, while my transmission was under warranty, I took it into the dealership to change the fluid at 60000 and 120000. It was super expensive and I had them do the full fluid exchange (not a flush). It was close.to 12 quarts. I did this so as to not void my warranty, if it ever went south. Now the car is sitting at about 155000 miles so I'll be doing the drain and fills on my own (less than 6 qts). I'll probably do it every 30000-40000 miles (along with a filter), since all the fluid is not being replaced. I read somewhere that the fluid Nissan uses is made by Idemitsu, though I'm not certain about that. It has the same exact slight green tint. However, I'm not sure if this brand is considered synthetic. May just go with Castrol, but not sure.
Hello I have a 2012 Altima with 117000 miles on it not sure when the transmission fluid was changed last as I just bought it a week ago , my question is my friend said I should drain and fill it three times rather than get a transmission flush because of the miles I wonder what your thoughts on this was and how long should I wait between each fill to refill the second and third time or is twice enough ?
Hey Sciscokid! I think draining and filling is definitely the way to go, just to be on the safe side. I drained and refilled my Altima twice but three times is just fine as well. The fluid gets cleaner with each drain and fill that you do!
If I remember correctly, I think I drove about 500 miles (two weeks for me) between my drain and refills and it worked out well. Hope this helps, if you have any other questions , just let me know! Thanks for watching! 😎
@@TrickShiftGarage Thanks
I would just drain everything once and refill. Change all filters, wipe everything down. Just change it every 60k.
Cuando se deja escurrir por lo menos 24 horas, sale medio 1/4 de aceite mas.
The service manual indicates to never re-use the bolts for the transmission pan. Is there some sort of film on the bolts that breaks after using them once?
Hmm interesting... As far as I know, there isn't any type of film on them. The bolts looked pretty average to me when I cleaned them off before re-using them. Haven't had any issues with them since doing this job either.
@npolite22 - Nearly every single bolt according to the service manual on these cars are disposable. That would cost a fortune if you can even find the bolts anymore.
I have just booked in my 2008 XTrail for CVT service, they tell me they only change oil and reprogramme the system,, do I need to worry about this ?
Yes, they should be able to change the filter. I'm not familiar with the XTrail CVT but I'd think it has a filter too. Thanks for watching! 👍
Hello sir, my pan doesn’t have a drain bolt. What should I do to drain it?
Unfortunately, you will have to loosen all the bolts around the pan and let it drain through there, start on one side of the pan by removing bolts slowly and catch the fluid as it comes down. Bring lots of rags 😉
Im curious when you mention tightening to a certain amount of pounds how do you know its tightened to that many pounds ?
It's listed in Nissan's service manual. Thanks for watching! 👍
Just trying this job today. I cannot get the pan to drop and there's not much I can grab onto. I don't want to to hit it if I can help it. And....I can only find 18 bolt hole gaskets and I have a 19 hole - and e every store claims 18 will fit.
Hey Ray! Sorry to hear your having issues, try taking a flat head screwdriver and wrap it with some tape and try to use it to pry the pan off. And ... No, an 18 bolt gasket will not seal correctly to a 19 bolt pan. Here's a link to a 19-bolt gasket:
th-cam.com/users/redirect?event=video_description&redir_token=QUFFLUhqbTl2TlVfeV9Hd3daakJSQ0dkcXJyMThfTDZmZ3xBQ3Jtc0ttMlp5Q2ZNQkwyWWtkUFpza09oNnpzd1k1bHBOSXdYSVExdklYeUotNU5zZU90WklGYVRZam5obWZVTWVlSjQtQ3RSUlhfbFFRdzBMdURXUE0yODh3UG5RSVdjM2xuM2V5dndyVzVncTB6bnN6ZVNRYw&q=https%3A%2F%2Fwww.autozone.com%2Ffilters-and-pcv%2Ftransmission-filter-a-t%2Fp%2Fduralast-automatic-transmission-filter-tf705%2F247730_0_0&v=_aTZv3ocE7Q
Hope this helps, let me know if you have any more questions Ray! 👍
@@TrickShiftGarage Hi there and thanks for your help. What I did.....on the front of the pan there is a small lip and I grabbed that with needle nose pliers. I used some carb cleaner (and my fingernail) to remove existing gasket pieces. I also used just a touch of substance to hold the gasket in place, of which I found....52 miles away in the next state. I am glad this job is done. Next is to get to that little filter that you have a nice video about!
The first time u changed ur fluid was at 200k???
My 2009 Altima Hybrid doesn't have a pan
how important is the torque spec? if i didnt have a torque wrench could i just use best judgement as far as tightening things or is that going to cause issues someway or another?
It's important not to over-tighten, as it could cause the gasket not to seal properly and if it's not tight enough if it could loosen and fall out overtime.
If you're in a pinch, go ahead and hand tighten using your best judgement and keep an eye on the bolts over next week. Check the bolts to make sure they are snug and there's no fluid leaks. Harbor Freight sells 1/4" drive torque wrenches for around $20 (in my area) so pick one up for next time 😉 Hope this helps!
I will definitely pick one up when i get a chance, its my first year owning a car so I'm learning all i can about maintaining it well and building up my lil tool collection. I appreciate the response alot! Your videos helped me do my oil change the other day on my 2008 altima, this is what is coming up next!@@TrickShiftGarage 🤝
Sweet bro, congrats on your first car! We have plenty of Altima maintenance and repair videos. Tools are investments so don't shy away from buying tools as you need them. Once you have a good collection they will last your whole life (most of the time lol). Good luck and let us know if you have any questions going forward. 😁👍
Tighten the gasket bolts to what you can torque it with two fingers. In other words, very light torque. Just enough to snug, then give it an extra half a turn.
is it for the transmission to smoke a little under the hood after you change the fluid ? i finished and turned the car on and noticed some smoke coming out, but then i backed into my driveway and it felt a lot better
i think i have to put a bit more fluid in
just added more fluid, will check tomorrow😅😅
Hi Steve, if you are asking if it's normal for the transmission to smoke, no. But it's pretty easy to spill some fluid on the exhaust pipes (happened to me lol) and then have it burn off when you turn the car on. It shouldn't smoke anymore after that though 😉
@@TrickShiftGarage after a while the smoke did stop, hopefully it was just that 😅😅
😂😂 Agreed! Thanks for watching!
Dont need to apply RTV on the transmission pan gasket?
No RTV, the gasket is enough to seal it.
I would like to know why you're removing bolts with a torque wrench
Yeah, I'm not sure either, it's not like the bolts were that tight either lol. Thanks for watching and commenting! 👍
Any thoughts on Lubegard CVT Recharge?
Never heard of it but will check it out! Thanks for watching! 👍
Lubegard products are phenomenal!
Is the same case for altima 2015 2.4L ?
Probably not, 2015 is a newer generation of the Altima. Thanks for watching! 👍
Do you put any gasket sealer?
No, Nissan doesn't call for any gasket sealer, the gasket is designed to be used without it. Hope this helps, thanks for watching Ramiro! 👍
Hey, no links for those parts in the description. Can you provide them?
Here you go! 😀
19 Bolt Gasket & Filter - www.autozone.com/filters-and-pcv/transmission-filter-a-t/p/duralast-automatic-transmission-filter-tf705/247730_0_0
18 Bolt Gasket & Filter - amzn.to/3rFmIAw
Castrol CVT Transmission Fluid (1 quart) - amzn.to/30ywGtU
Castrol CVT Transmission Fluid (1 Gallon = 4 quarts) - amzn.to/3ytYj3R
1/4" Drive Torque Wrench - amzn.to/3FVFGYG
3/8" Drive Torque Wrench - amzn.to/3E3Kkmm
Drain Pan - amzn.to/3E0MUcX
Shop Rags - amzn.to/3e3OBv3
Shop Towels - amzn.to/3mRx0dG
Brake Cleaner - amzn.to/3uyr8vT
@@TrickShiftGarage hey thanks!
I forgot to add the magnets inside the pan !! Is it necessary???
Unfortunately, yes. The magnets are used to grab metallic particles from the transmission fluid so they don't circulate around and damage the internals.
I know you don't want to hear that, but I would go back and drop the pan to put the magnets back in. You can use a super clean drain pan or container to catch the fluid so you can re-use the fluid. Hope this helps! Thanks for watching! 💪
@@TrickShiftGarage for the mean time can I stick them outside the pan?
Sure! It wouldn't hurt anything, unless the magnet falls off, but it should help for the mean time.
Thank you for the info!
You're welcome!
What kind of transmission fluid goes back in a 2010 Nissan altima 2.5 ?
It should be NS-2 spec fluid. Double check your owners manual just to be sure. Thanks for watching! 👍
Thank you
Do you not need to use a sealant on the gasket when reinstalling?
No, you don't need sealant but it probably would have helped hold the gasket still to get the first few bolts on lol. Thanks for watching! 👍
Thanks for the fast response.
how about the hybrid. told there is no filter, just drain and replace...
What year hybrid?
So when your checking the level at operating temp you don’t lock the dipstick? You turn it so it doesn’t lock, and push all the way down?? Great video! Just swapped an engine into mine and I want the fluid to be at the perfect level, my scanner says my atf temp is 195-200 when at highway speeds, 190-195 idle
Why Nissan doesn’t recommend to replace the filter
Just my opinion, but the only other possible reason I can fathom is, they rather replace the whole transmission... 💰
Nissan could have promoted maintenance and replacing the filter would/could have brought in some business to the service shops. Granted, there's not as much money in routine maintenance compared to a full on transmission job, but it wouldn't have caused a bad reputation as they have now with the CVTs since they were telling us it was a "service-free" transmission. Anyways, just my .02 cents lol. Thanks for watching! 👍
How do you find all these torque values?
You can find them in a Haynes or Chilton manual! Thanks for watching! 🤟
Was that NS-2 CVT fluid?
Yes sir! Thanks for watching 🙂
You know the 2007 to 2010 are the same cvt?
Yeah, same CVT through 2012, though Nissan gave some of them different pans (with no drain plug) and bolt patterns. Not sure why they took away the drain plug and changed the bolt pattern for some of them but it is what it is, thanks for watching! 🙂
Is it fine if 1 out of 19 bolt holes is stripped?
If it doesn't leak, it should be fine temporarily. However, buy a new bolt as soon as possible and install it just to be on the safe side. Thanks for watching! 👍
@Trick Shift Garage thanks for the advice! But I think it's the screw hole of the pan or worse, the transmission. I've been keeping an eye on leakage, and it doesn't seem like it's leaking so far. Do you have any experience with tapping or helicoil? I'm not sure which one would be better in this case. Thank you
Ahhh ok, was hoping it was just a bad bolt lol. I don't have any experience tapping or using helicoils, sorry!
What I would do is keep an eye on it periodically and if it starts leaking you have two options, take it to a shop and have them deal with it or take the pan off and try using some RTV along the area of the pan-gasket-transmission and hope it sticks! It's a band-aid solution and will eventually need to be properly fixed with a helicoil.
@@TrickShiftGarage thanks again for the advice! I will try that
You're very welcome!
Do not put 6 qts like this video suggest.
Put 5 than check. I learned the hard way by doing it the same way as this video. I was a qt over when I checked the level. Also was told by the dealer that it's only 5 qts.
Thank you for letting us know! I will look into this and pin a comment informing viewers to start at 5 qts and then check level and add accordingly. 👍
Thank u. Also ,You should only use nissan transmission fluid ns2.
How is your altima doing since u put the Castrol in. Thanks for caring. Appreciate the info.
You're welcome! Yeah, I was worried about not using Nissan's NS-2 fluid in the beginning, but the Castrol CVT fluid has been good, running normally and smooth, no issues that I can speak of. The Nissan brand NS-2 is good to use too but at the time the video was made they were charging A LOT for that fluid so I decided to give Castrol a chance and I don't regret it. Hope this helps and thanks for watching! 😁
Here's a video showing the removal of the filters on a Jeep Compass
th-cam.com/video/Qae6rkoDa0k/w-d-xo.html
Gotta take out the battery and tray, starting around eight minutes.
th-cam.com/video/8h_i0zY4zGc/w-d-xo.html
Play this one up to two and a half minutes then skip to seven minutes where he takes out the battery tray and then replaces the filter.
Thanks man! I'll check it out.
Have a 2012 Nissan Altima it has a drain plug….
Awesome! Makes it so much easier to take the pan off without having to worry about fluid going everywhere lol.
This car needs 6qts of oil right??
I ended up using 6 quarts of trans fluid. But I would start with 5 quarts, measure the level, then add half a quart at a time until it shows full. Thanks for watching Antonio! 👍
@@TrickShiftGarage Thank you very much for the information, excellent videos 💪🏼😎
You're very welcome! 💪😉
Did you put a new paper filter in it? Don't the CVT have two filters.
Hi Paul! You are correct, there are two filters. When we were creating this video, we couldn't find one in stock. We will be creating a video for the paper cartridge filter soon, so stay tuned! 🙂
@@TrickShiftGarage I couldn't find anything regarding another filter. Do you know what it's called exactly?
Hey Bentley! I call it a cartridge filter lol. Here is a link off of AutoZone:
www.autozone.com/filters-and-pcv/transmission-filter-a-t/p/duralast-automatic-transmission-filter-tf246/555500_0_0
I plan on changing mine soon, so stay tuned! 😎
Video? Please they chance filter cooler transmisión
Hey Gerardo, here you go 😉
m.th-cam.com/video/sZK0ob6KT1Y/w-d-xo.html
Hi! How many quarts need to fill? I guess it should be 5 Quarts?
Hi Oleg! I'd start with 5 quarts, then measure and add 1/2 quart increments as necessary. Thanks for watching! 😎
@@TrickShiftGarage Thanks for the info. Confirmed!
I didn't reach the normal level with 5 quarts for my 2012 Nissan Altima coup 2.5S. Fluid lightly touches dipstick.
Add half a quart, then check again, make sure fluid is hot, car is warmed up and running.
Noticed you're not using air gun.
Yes, I prefer hand tools unless necessary. Thanks for watching! 👍
I wish I could pay you to work on my car
Haha!! Thanks for watching RJ! 👍
Here for specs 😂
Lol thanks for watching!
Sorry but that is not the catridg3
Here is the cartridge filter 😁
th-cam.com/video/sZK0ob6KT1Y/w-d-xo.html
B
Thanks for watching! 🤟
I do not recommend 70 inch-lbs that’s to much the aluminum inside the holes is super delicate you can strip it super easy
Agreed, you have to be very careful while tightening these bolts down. The 70 inch-lbs is what Nissan says to tighten them to and I haven't experienced any stripping while doing it. Thanks for watching Juicy! 👍
F NISSAN!
Thanks for watching! 👍
Didn’t do anything hard. You didn’t even have to make a video
Exactly Calebaker, it was no big deal haha, thanks for watching! 😎👍
Utube videos are for people who should not be working on cars/electrical/plumbing, etc... but think they can do anything
messaged on Facebook