most problem's with spark plugs particularly in connection with classic cars and motorcycles are caused by two things , over use of the choke and poor carb set up , this causes carbon build up on the insulator " this cannot be cleaned off with a wire brush , you need a media cleaner . if you have a air compressor you can get a cheap plug cleaner on line.
Thank you for the video. I tested my spark plugs. It shows 20k 4.06 ohm and 4.50-4.60 ohm. However, it does not show short circuit in buzzer mode, the buzzer does not beep. I do not understand what is good or bad.
Meters can't check plugs for cracked insulators, you have to put voltage through and view the spark. There is only one that can the Dechmont spark plug testing kit.
Ignition Coil Test: th-cam.com/video/zhS4u3vkn7M/w-d-xo.html
Finally you did it my friend
Congratulations BEST F VIDEO EVER . That’s how you do it .Great 300 % good.
short video , yet very informative . Thank you from Iraq
Thanks for watching !
Short
Precise
And
Conssice
Love it!!!!!
Thanks !
Very very useful. Focusing on the points 🎉🎉❤❤
Thanks for watching !
I have tested both used and new plugs for my car. neither new or old plugs have any resistance even though there should be. any comments?
Check for continuity
most problem's with spark plugs particularly in connection with classic cars and motorcycles are caused by two things , over use of the choke and poor carb set up , this causes carbon build up on the insulator " this cannot be cleaned off with a wire brush , you need a media cleaner . if you have a air compressor you can get a cheap plug cleaner on line.
Very, very good. I never actually thought about checking spark plugs.
Thank you.
Thanks for watching !
Awesome helped much! you rock
Thanks for watching !
Buen video, gracias, cuantos ohms deve tener un sesor bueno
Wow what a great video thanks.
Thank you very much ! :)
Best way in scantool showing misfires other ways not important
Thank you for the video. I tested my spark plugs. It shows 20k 4.06 ohm and 4.50-4.60 ohm. However, it does not show short circuit in buzzer mode, the buzzer does not beep. I do not understand what is good or bad.
A resistive plug
Meters can't check plugs for cracked insulators, you have to put voltage through and view the spark. There is only one that can the Dechmont spark plug testing kit.
Isnt a good reading should be 3k-5k ohms?
What if spark plug is weak ?
U just gain a new sub love the test will do mine soon just took out 1 Quick test it pass with Flying Colors Thanks Bro 💯👍🏽
Thanks for the sub!
I think you need a 50,000 volt megger, not a multimeter.
mas maganda sana kung may voice over para mas maintindihan