Hello sir I just brought ui12 and I want to use aux out as a in ear monitor and I also brought behringer pm1 but aux out signal goes to only left headphone not right side I checked everywhere to not doing pan left side and I didn't but when I checked master output it's hear left and right If you have any solution please let me know Thank you for advance
Shure it is ! No idea why he is doing it that way!? Since I see no advantage in missusing the FX channel 😳 HP1 and HP2 are equally affected by this, using solo function on a fx channel BS and to me it makes absolutly no sense, doing something else than routing A9 and A10 to one of the two headphone outs.
Additionally it is also possible to use A9 & A10 as a Matrix Stereo out, which would be even better for monitoring the master mix with seperated volume faders. Or if you want a different mix e.g. for stagemonitoring, just leave it an aux and also do it as said: Go to the patching bay 😅 hw outs are the answer
With the new firmware 3 'Cascade' feature, how can I sent a unique AUX on the remote unit from channels on the host unit? (i.e. I don't want to take up (or don't want to use 1:1) the extra input channels I can use on the host unit) I want to expand both inputs with a remote unit and also need to expand my AUX sends
You can patch any AUX to a SLOT (Cascade is 32 x 32 slots) and then just bring that slot to a channel and send it to the AUX or as a DIRECT OUTPUT to an AUX.
Hello sir
I just brought ui12 and I want to use aux out as a in ear monitor and I also brought behringer pm1 but aux out signal goes to only left headphone not right side I checked everywhere to not doing pan left side and I didn't but when I checked master output it's hear left and right
If you have any solution please let me know
Thank you for advance
Wouldn't you be able to just route aux 9 into the headphone output?
Shure it is ! No idea why he is doing it that way!? Since I see no advantage in missusing the FX channel 😳 HP1 and HP2 are equally affected by this, using solo function on a fx channel BS and to me it makes absolutly no sense, doing something else than routing A9 and A10 to one of the two headphone outs.
Additionally it is also possible to use A9 & A10 as a Matrix Stereo out, which would be even better for monitoring the master mix with seperated volume faders. Or if you want a different mix e.g. for stagemonitoring, just leave it an aux and also do it as said: Go to the patching bay 😅 hw outs are the answer
This was done before the software Update that allowed you to do that
With the new firmware 3 'Cascade' feature, how can I sent a unique AUX on the remote unit from channels on the host unit? (i.e. I don't want to take up (or don't want to use 1:1) the extra input channels I can use on the host unit) I want to expand both inputs with a remote unit and also need to expand my AUX sends
You can patch any AUX to a SLOT (Cascade is 32 x 32 slots) and then just bring that slot to a channel and send it to the AUX or as a DIRECT OUTPUT to an AUX.
So, can i use independient 5 stereo monititors without affect the main mix?
yes that is correct
In my firmware 1.0.7110 ui24 does not have the pre / post button in fx sends
That is correct, it is in BETA firmware to be released later this month