How To Dilute Detailing Products (10:1, 4:1) - Dilution Ratio Guide
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Here’s the dilution calculator: www.enviro-one...
A quick dilution chart:
32oz @ 10:1 = 2.9oz of solution / 29.1oz of water
128oz @ 10:1 = 11.6oz of solution / 116.4oz of water
32oz @ 4:1 = 6.4oz of solution / 25.6oz of water
128oz @ 4:1 = 25.6oz of solution / 102.4oz of water
32oz @ 1:1 = 12oz of solution / 16oz of water
128oz @ 1:1 = 64oz of solution / 64oz of water
Download The Ultimate Guide To Start Your Detailing Business: detailgroove.c...
- - -
// R E S O U R C E S:
📞 Book a one-on-one coaching session with me: detailgroove.c...
✅ Subscribe to Detail Core TH-cam channel for 100% business content: / @detailingbusinessclas...
📘 Download the 9-services you can offer in your detailing business: detailgroove.c...
⭕ List of all the tools/products I use: detailgroove.c...
💥 Follow the exact system I used to get my website on the first page of Google (SEO): detailgroove.c...
- - -
// F O L L O W:
📷 Instagram: @detailgroove ( / detailgroove ) - ยานยนต์และพาหนะ
0:25 - Explaining concentrate vs R2U / 3:43 - Different dilution ratios / 6:06 - Mixing a bottle / 10:28 - Foaming ratios. Did I cover everything you needed? Let me know if you have any questions. All links are in the description box :)
Hi Oscar regarding the McGuire all purpose cleaner, I have the same McGuire brand 10:1 diluted bottle with the markings on the side. Do i fill the remainder of the bottle to the very top with the all purpose cleaner after I filling the bottle up to the 10:1 marked line with water? Or does the math need to be applied manually to where you add a small amount that does not reach the top. I did not see any markings on the bottle to let me know where to stop adding the concentrate. I did not want to over do it.
A fast way to dilute without using a chart add the dilution ratio you want and divide it by oz of the bottle you have. For example if you want to dilute 8:1 in a 32 oz bottle. 8+1=9. Then divide 32/9 is 3.5oz of chemical 28.5 of water. After I found this out it saved me a lot of time compared to using the calculator
🤯mind blown, thanks man
I was about to type a very similar comment, lol! Glad I read yours first! Dilution ratios are super confusing until you figure out the equation, but once you know that equation, they become super simple!
Great tip!
that's how i calculated it when i heard of ratios. It really isn't hard, it's elementary grade math
@@Jay2423M agreed 😂
Why is everyone slaying him in the comments about his performance on explaining this topic. Nobody is paying for his expert profesionalism. We are hear to learn of someone who clearly knows what hes talking about. He did an awesome and entertaining job on explaining in the simplest way possible. This video made me laugh especially between 6:00 - 6:13. That was making me crease. Good job bro.
You win some, you lose some. It's apart of the game. Thanks Addy!
@@DetailGroove
Can I use the 10-1 for black leather?? It’s not too bad is not really that dirty
@@DetailGroovethanks man , it’s what I’ve looking for on what the mixes are for a first timer.
Not sure if someone commented to help him on ratio but here’s my explanation. 10:1 means 10 parts water to 1 part solution. 4:1 means 4 parts water to one part solution. 1:1 means equal amount of water to solution.
That makes alot of sense
But what do you mean by parts
@@luismariocampos4277 English way of using a neutral metric
Thanks for the short simple answer 👊
Thanks for letting us know
As someone who was completely lost when people mentioned dilutions, this video is great👍🏾👍🏾
Was having trouble with the ratio too . But I understand with ur help thanks 😅😅😅
Thank you for your explanation, great content as usual not sure why ppl can’t get the simple dilutions found on most bottles. I’ve been detailing my Sierra for the past year, I get compliments all the time about how clean my truck is all thanks to Oscar for teaching me. I have purchased most of his recommendations, detail buddy brushes to towels and the carry tote which I love! 🙏🏼😊👏🏼👏🏼
💯💯
Finally someone explained it appreciate it brotha!💯
It's good to have you back Oscar you've been away for a minute I have a question about super clean that I believe it's 32 oz bottle the one they sell in the local auto parts does that one come dilute or is it straight great video by the way thanks for sharing
I know we have calculators for everything today, but I don't think you explained the actual math, even though it should make sense if someone is following along.
You're dividing the bottle into how many total parts you need. So if your making a 4:1 [4 parts water to 1 part cleaner is 5 parts total] ratio for a 16oz bottle, 16oz/(4+1)=3.2 . You will pour (1) 3.2oz of cleaner into your bottle and (4) 3.2oz of water.
The ratio 2:1 is the only exception to this rule. A 2:1 only has 2 equal parts present but with your calculation it would turn into 3 parts divided by the medium used which would be inaccurate.
Therefore it can only be looked at as total medium used divided in half gets you the proper amount for both water and chemical.
@@obliviondio huh? 2:1 ratio for an 8oz mixture would be 2.6oz cleaner and 5.4oz water. That's still three parts.. 2.6+(2.6*2)
Agree with other comments - typically your videos are very well done and full of great information. This one was not your best, mostly because of confusing explanations on dilution ratios and how to achieve them.
Thanks for that. You win some you lose some 🤷🏽♂️
Awsome thanks for making these video i always wondered what it ment lol now i understand
You’re welcome!
I hardly mess with the bottle lines. 10-1 for 32 onz, 10+1=11. 32/11=2.9. 32-2.9=29.1 oz of water and your 2.9 of product. To make it more accurate I try to work with better numbers. 33 onz of solution is 3 onz and 30 onz of water for 10-1. For 4-1 dilution I make 30onz, 4-1=5. 30/5=6 . 30 minus 6=24oz of water and 6 of product. 2-1=3 for 30onz of diluted final product , 30/3= 10oz of product 30-10=20 oz of water. With this math you can add product before you fully ran out. Say 20 oz diluted if you have like 10onz left or less in your bottle and you need 4-1 dilution. 20/5=4. 20-4=16 that's 16 water 4 product. Boom. Whatever round number works you never need to be committed to a full bottle of product 😎 just add 1 to the part ratio, divide the full amount you want, subtract the ratio number from the full amount, the big amount is water the less is product, Boom.
I did a test yesterday between Purple Power and Super Clean, Super Clean destroyed PP! It got the gunk that PP wouldn't get! I've never seen a degreaser do what SC did! I'm going to buy a 5 gallon pale.
Thanks so much I am beginning my details on my own and i just do a vehicle that i was using to much chemical because I do not Learn how to dilute it
Oscar, don't listen to all the haters bro. Excellent video. Thank you!
Your the first person I’ve seen mention Malco products, which ones do you use?
What kind of water? Distilled water? Tap water? Or Water which has been filtered by those water filter purchased at costco? Or boiled water and cooled?
Super Clean at 10:1 dultion dripping on driveways asphalt, will it ruin/stain the asphalt driveway?
Gracias bro se te agradece mucho’ eres el mejor enseñando
Oscar...you can throw out the first 6 min. of video. You finally get to the point of the exercise at 6 min. where you show and tell, which was awesome in explaining how to fill the container (water first) and measuring in the measuring cup (emphasizing measurements can be rounded). Thank you for providing the link to determine the link for ratio computation, which will assist most questions. Only other thing I personally use instead of tap water is distilled water, but that's personal preference. Good job!
Yep, that's why I provided time stamps on the video and in the comment section since it was all over the place. Thanks for the feedback Bill!
Where did you get those spray bottles that have to 10-1 4-1 etc measurements
have you ever tried diluting the adams iron remover? If so how'd that go.
3:24 water always goes first. So if I need 10 part solution and 1 part water it would be 1:10 and if 10 part water and 1 part solution is 10:1
Demonstration
Detail Groove @ “demonstration”
What does that mean
this is really helpfull thanks a lot. GROOVE
finally i always did 1 oz of solution lol doing it wrong but now i know how thank you
What spray wax are you using now ? Still the Malcom?
I feel your pain on having to explain the ratios, it has been a long time asked question.
For ease of mixing I use the large number for my base (base is always first , because it is the base number) and the small number for my product/additive (adding to the base product).
Is Jay Lennon interior in the question?
Is it possible if I can use super clean on the exterior panels even if I want to remove water spots ?and what would be the best dilution ratio
Great video thanks for sharing 👌👍
Dear sir, after we dilute 4:1 or 1:1. Can we add some more ammonia or vinegar?thanks
Where can I purchase that 32oz bottle with sprayer?
Walmart, Target, Home Depot..buy locally
What is that container you use when you've already pre-diluted?
Where do u get the pumps u put over the bottles
OMG this is SO helpful!!!!
i think you should delete and redo this video bro!!! my honest opinion
Why is that?
FACTS !! YOU SOUND SO RUSHED AND IRRITATED. I HONESTLY HAVE LEARNED ALOT FROM YOU AND THIS VIDEO FELT/SOUNDED LIKE YOU DID NOT KNOW WHAT THE HELL YOU WERE EXPLAINING. I SAID THAT FROM A DAY ONE SUPPORTER. WHEN YOU ONLY 20K SUBS. JUST BEING A TRUE SUPPORTER NO SNEAK DISSING YOU I KNOW WHAT IT TAKES TO MAKE THESE VIDS AND I VERY MUCH APPRECIATE YOUR INPUT AND CONTENT.
@@jacquesjean2926 Well let's see you do better.... You run your mouth like you're a pro at this so show us what you can do. No need to hate on Oscar.
Have to say. The slamming the bottles was driving me nuts lol
What cups are you using to measure? Where can I get it ?
Thank you so much man this is exactly what I was looking for. Are these the products you recommend? I have a 1800 green works pressure washer. Became a below knee amputee a year ago. Started with my own car and next step is offering neighbors free jobs.
So u dilute it with water ? All interior chemical
Whenever I use a 4:1 dilution ratio for meguiars tire and wheel cleaner. I use a Home Depot manual pump sprayer. After a couple uses, I noticed the spray bottle no longer sprays. Is there any other sprayer will last longer and possibly not be harmed by the tire and wheel cleaner?
I’ve never used ONR cause I have a preference for ecoshine from shine supply or ech20 for waterless/rinseless washes. Have you use either of these two products? If so how do they compare to ONR?
10-1 for cloth/fabric ?
Thank you 🙏
You sound like some guy I know and his name is Oscar to lol Great Videos, Super Helpful!
where can I get that big container from, so I can store my chemicals?
Like 👍 before even watching
Quick question which pump attachments do you use to attach to a gallon container i want to use a pump to attach to a super clean gallon or a maguire hyper dressing container im trying to use a pump to avoid dropping material or wasting material when filling a 32 oz spry bottle any Amazon link you could provide that you use id appreciate it thank you
Thank you
I'm gonna miss Oscar when he hit's the big time and becomes to big for us little folk.
We are living in the era where we can ask him a question and he is likely to answer.
Give it a few more years and he will be too big to answer every question. i enjoy his videos.
Very good
Remember To Use Distilled Water Only!! Is This Correct Way Oscar!!
Dude thank you!
Nice info to know
Cool thanks 🤙
Remember to designate a 10 to 1 ratio is 10 parts water to 1 part product.
Distilled water?
Thank god
If it does say dilute it such as my meguiars apc, do I have to?
No you don't unless u want to. It might be too strong and it could stain surfaces if not diluted.
when you said won one too many times and get tongue twisted ahahahahahaha
I googled after 2 minutes thanks bro
1:22 did your car just crashed in the back?
Lol looks like it
Is that car canopy?
lol.....2.9 and 29.1. I don't measure precisely.. Super clean roughly 2/1 or 1/1, 4/1, 10/1.....seeing that it can be diluted in so many ratios as stated...whatever. Close is good enough. Strong,medium, light. Ya, it's best to put water in first....I keep forgetting that.
Still dont get it. Used the calculator.. Made it even worse. But thanks anyway.. We love you bro
20:1 ??
What's going on bro. I usually enjoy your video but this one made me feel like you was all over the place. I eventually got the information I needed from you. However, you could have rehearse what you wanted to say or do as many retakes as you needed to help provide a cohesive video. Just my non-professional thought. Good info though.
Yeaaahhh, the thing about all that is... life lol
if you dont know by now the dilution ratio of ONR..... wow.....
@@DetailGroove Is this a new garage?
When you have haters you know you're doing something right😉
🔥🔥🔥🔥🔥🔥🔥🔥🔥
I’m sorry I’m not trying to be mean but Lord help this guy! I’m more confused watching this video ☝️😂 I’m just going to figure it out myself!
It’s called division.
Video is awful
Confusing explanations
Lol what?!? Why dis so hard bruh
Too much talky not enough explainy
Hey guys if ur struggling figuring out what the ratios are this video will help you th-cam.com/video/p33BYf1NDAE/w-d-xo.html
you remind me of the david Blaine spoof guy
Thanks for trying, but you did not explain well. I couldn’t even follow along
Thank you