Huge help! My step dad recently passed and I've been doing my best to take care of my mom and her property. We have a 642b and until this video, I really thought I was in over my head. I really appreciate you sharing your knowledge.
Great instructional video. I have a 530 and it adjusts the same way. Thanks for taking the time to make this video. Also heard Mark Knophler music in the backgound and recognized the song immediately. One of my all time favorites.
Thanks! Yes Dire Straits or Mark Knopfler make up about 90% of the music that plays in my little shop when I’m working away in there! Went and saw him in Vancouver in 2019, very great show!
100% correct best video, no need to buy any parts. Between small amounts of ware and these bolts backing off on their own from vibration this is a repair you will have to get familiar with if you own one of these.
i bought longer bolts and put nuts on the back of them. between locking the nut and bolt together tightly and the threads inside the steering block, they should be tight till the machine dies for good.
Does the hydraulic fluid need to be brought up to operating temperature first? Its cold outside. My Allis tractor has a wet hand clutch and it creeps when its cold, then goes away. Wondered if cold oil has an effect on a Bobcat for creeping.
I watch your video I learned some from it thank you I have a 740 bobcat had a similar Problem but is making some buzzing noise I know that is not normal but could it be fixed?
I have a creeping 642b. When I'm going forward I need to constantly pull back on my right lever to keep her straight. Will this adjustment fix that as well? Total noob to these machines. Thank you for the video!
that was a great vidio.for the right side ,,,now show us how you adjust the left side which is way back under the metal plate where the fuel tank sets on. thanks @@77هيرتز
Thanks so very much, I just got my 743 adjusted to almost perfect!
Huge help! My step dad recently passed and I've been doing my best to take care of my mom and her property. We have a 642b and until this video, I really thought I was in over my head. I really appreciate you sharing your knowledge.
Great instructional video. I have a 530 and it adjusts the same way. Thanks for taking the time to make this video. Also heard Mark Knophler music in the backgound and recognized the song immediately. One of my all time favorites.
Thanks! Yes Dire Straits or Mark Knopfler make up about 90% of the music that plays in my little shop when I’m working away in there! Went and saw him in Vancouver in 2019, very great show!
Awesome stuff! I have the same model 743, same problem, now I can fix!! Thanks so much!
100% correct best video, no need to buy any parts. Between small amounts of ware and these bolts backing off on their own from vibration this is a repair you will have to get familiar with if you own one of these.
i bought longer bolts and put nuts on the back of them. between locking the nut and bolt together tightly and the threads inside the steering block, they should be tight till the machine dies for good.
Awesome video. I have a 642 and now know exactly how to fix it. My thanks.
Thanks!
Does the hydraulic fluid need to be brought up to operating temperature first? Its cold outside. My Allis tractor has a wet hand clutch and it creeps when its cold, then goes away. Wondered if cold oil has an effect on a Bobcat for creeping.
I watch your video I learned some from it thank you I have a 740 bobcat had a similar Problem but is making some buzzing noise I know that is not normal but could it be fixed?
Thank you for the tutorial, now I wont go into work looking like a complete idiot 😄
I have a creeping 642b. When I'm going forward I need to constantly pull back on my right lever to keep her straight. Will this adjustment fix that as well? Total noob to these machines. Thank you for the video!
No, most likely your linkage needs adjustment, or your steering lever bushings could be worn out. This adjustment is mainly for setting the neutral.
could you show the hose routing from the hydrostatic pump to each drive motors my 732 where missing having a hard time figuring it out
Yes, give me a day or two, just out of town. I'll do it once I get back.
did you ever get time to show the hose routing I in desperate need all help you be grateful
@@chrissadler8816 sorry no not yet, got sent out of town for work but I'll do it once I get back, should be back home by friday if all goes to plan...
@@chrissadler8816 video is uploading as we speak. Hope it helps get you up and running again. th-cam.com/video/6wNtfl35jvo/w-d-xo.html
Would this work for a 743?
Yes. I have a 743 that does circles when I don't hold the levers.
you are genius
👍🏻
that was a great vidio.for the right side ,,,now show us how you adjust the left side which is way back under the metal plate where the fuel tank sets on. thanks
@@77هيرتز
I need to do this to my 743...it doesn't creep...it leaves the community...lol