i guess i wasn't squeezing with enough confidence, i thought i was gonna break it until i saw your video. I put a little more pressure and it worked!!! Thanks a lot!!
About four years ago, I was also rear ended in my W212 E63S sedan. And that is when I too found out about the system. Works like a charm. I had no whiplash at all. Without it I sure would have
Thank you for the video. I watched others before seeing your video and they made it seem complicated. I watched your video 1 time and went to my Mercedes and popped the headrests back in in 20 seconds. Thanks again!
This just happened to me. They're re-paving a road and left a 3" lip in the road. On my way to work, 3 am, NO signage saying Bump, or whatever I hit this lip in the road at at least 35 mph. both driver and passenger head rests opened up, ( thought I lost my front end of my E350, it was soo loud) . Thanks sooo much for the tutorial on how to get them back together. You Rock!!
Dang bro that sucks! I hate when that happens. Especially when they use those metal plates when re-paving or doing road work. Well I’m glad you were able to reset the headrests and front is still in tack! 👍🏽
I couldn’t get my drivers side to reset. The pin fell down inside. I was able to retrieve it with duct tape on the end of a long slim screwdriver. It still wouldn’t latch and I realized the retention strap was folding between the pin and the locking mechanism. I was able to get it to lock when I had another person pull up on the strap, and then I was able to tuck the strap back in after it locked.
Bro, thanks a lot, short and well explained video. But the best part it's that i did exactly what and how you said, and tan-Tararan, FIXED in less than 5 min. Thank you again!
Hi, I'm looking for a technology that detects an imminent collision from the rear using a radar sensor to signal the active headrest (consisting of a motor and mechanism to adjust it). My question is: does this technology work? If yes, can we discuss it further?
TH-cam ❤. I swear Is the best! Thank you for this video. I took my jeep to jeep dealerships cause engine light and gas cap warning came on the dashboard. Few issues listed so I said I’ll pay for the diagnostic and pick up my jeep until I have enough money to get everything fixed. I don’t live far at all from the dealership and I didn’t go anywhere since picking it up. Few days later which is today I went to the market I noticed this issue with passenger headrest. So I went to the dealership to ask about it they said it’s due to collision . Ummmm what collision? I haven’t been anywhere since the dealership. I don’t see any signs of collision anywhere on my jeep. Something isn’t right and I’m going to have them check the cameras for this from the time I dropped off my jeep at the dealership up until I went to pick it up. Im so annoyed . I noticed the mileage went up as well. But at least it looks simple to fix as shown in your video . Thanks again. Subbed and liked!!
Thank you for leaving comment. Yeah, getting actually help from the dealership can be a challenge. That is what made me want to look into working on my own car when I can. Good luck 👍🏽
thank you very much Thanks to you, I saved $760. The repair cost in Korea is this price. Tonight I'm having a party thanks to you. Thank you very much. I hope you are always happy and everything goes well. thanks.
Unfortunately it happens yesterday but i got so upset that may my husband hit my car from back so i got mad but i ll try to make it tomorrow i ll tell you what happens thanks for this video
You’re a blessing to the e class community bro
Thanks man! I appreciate that. 🙏
i guess i wasn't squeezing with enough confidence, i thought i was gonna break it until i saw your video. I put a little more pressure and it worked!!! Thanks a lot!!
Glad I could help!
About four years ago, I was also rear ended in my W212 E63S sedan. And that is when I too found out about the system. Works like a charm. I had no whiplash at all. Without it I sure would have
Thank you for the video. I watched others before seeing your video and they made it seem complicated. I watched your video 1 time and went to my Mercedes and popped the headrests back in in 20 seconds. Thanks again!
This just happened to me. They're re-paving a road and left a 3" lip in the road. On my way to work, 3 am, NO signage saying Bump, or whatever I hit this lip in the road at at least 35 mph. both driver and passenger head rests opened up, ( thought I lost my front end of my E350, it was soo loud) . Thanks sooo much for the tutorial on how to get them back together. You Rock!!
Dang bro that sucks! I hate when that happens. Especially when they use those metal plates when re-paving or doing road work. Well I’m glad you were able to reset the headrests and front is still in tack! 👍🏽
I have a friend who needs help, to put it back, I loved it 😊 now I got clue 👊👊👊
I had the exact same problem on my w204 c class but i havent driven the car for 2 weeks and it popped up, well put video thanks for the help
I couldn’t get my drivers side to reset. The pin fell down inside. I was able to retrieve it with duct tape on the end of a long slim screwdriver. It still wouldn’t latch and I realized the retention strap was folding between the pin and the locking mechanism. I was able to get it to lock when I had another person pull up on the strap, and then I was able to tuck the strap back in after it locked.
Bro, thanks a lot, short and well explained video. But the best part it's that i did exactly what and how you said, and tan-Tararan, FIXED in less than 5 min. Thank you again!
Good deal bro! Glad I could help. Thanks for leaving comment!
Terimakasih videonya ❤, saya barusan mengalami , tapi tanla terjadi benturan apa2 di mobil saja, akan saya coba cara anda, tq 🙏🙏
Thanks a million you’re dope for my dodge grand caravan haven’t got it to snap in but the motion for it to close worked
I have the same problem, but i didn't hit anything, even didn't get any bumps or obstacol.
How do u release the lock
Mine too never hit anything
Hi, I'm looking for a technology that detects an imminent collision from the rear using a radar sensor to signal the active headrest (consisting of a motor and mechanism to adjust it). My question is: does this technology work? If yes, can we discuss it further?
TH-cam ❤. I swear Is the best! Thank you for this video. I took my jeep to jeep dealerships cause engine light and gas cap warning came on the dashboard. Few issues listed so I said I’ll pay for the diagnostic and pick up my jeep until I have enough money to get everything fixed. I don’t live far at all from the dealership and I didn’t go anywhere since picking it up. Few days later which is today I went to the market I noticed this issue with passenger headrest. So I went to the dealership to ask about it they said it’s due to collision . Ummmm what collision? I haven’t been anywhere since the dealership. I don’t see any signs of collision anywhere on my jeep. Something isn’t right and I’m going to have them check the cameras for this from the time I dropped off my jeep at the dealership up until I went to pick it up. Im so annoyed . I noticed the mileage went up as well.
But at least it looks simple to fix as shown in your video . Thanks again. Subbed and liked!!
Thank you for leaving comment. Yeah, getting actually help from the dealership can be a challenge. That is what made me want to look into working on my own car when I can. Good luck 👍🏽
Damm and the dealer wanted $900? You the man.
thank you very much
Thanks to you, I saved $760.
The repair cost in Korea is this price.
Tonight I'm having a party thanks to you.
Thank you very much.
I hope you are always happy and everything goes well.
thanks.
Thanks from Brazil
Very informative video. Thank you.. Would you happen to know how fast someone would have to be going for these to deploy when getting rear-ended?
Unfortunately it happens yesterday but i got so upset that may my husband hit my car from back so i got mad but i ll try to make it tomorrow i ll tell you what happens thanks for this video
Thank you, that did the job! A quick diy 👌🏻
Just happened to me today and all I did was break slightly hard exiting a 7/11. Thank you
Glad I could help. Thanks for leaving comment!
What do I do if my clamps are closed
i have the same problem. did u find out how to open them?
mine won’t click into place it keeps going back to the original position
Keep theses videos coming brotha !! Hell Yeah!!
Thanks bro!
Let me try it on mine and give feedback, thanks for the tutorial
Please do! You’re welcome
Thank you
Thanks man you just saved me some bread 💯
Bro big ups for you
Worked for me as you said, thank you that was so helpful
Glad it worked!
Bro, the clips that holds the metal bar are locked, so i can’t put back the headrest, what can I do?
Damn bro, that sucks. I think you will have to get new headrests. Maybe even get used ones from online.
Take off the back of seat, disconnect the plug to head rest. Connect pwr and ground to the 2 wires. It will open the clips
I appreciate this was very simple solution
Glad it helped. Thanks for leaving comment
Mine didn’t clip!! I’ll keep trying!
thank you that just happened to me. it just popped out! thank you
You’re welcome
Mine went off from a pot hole and some of the plastic broke 😢
Does the car, need to be on?
No, it doesn't.
Thank you for this,really!!
You're so welcome!
Thanks for your help
You’re welcome
Much appreciated man
Thanks this was really helpful
Glad it helped
Thanks a lot brother…it worked..
Glad to hear it worked!
I have c300 2015, is it can be rest?
I am not sure
I'll try it 2morow
Ours happened on a tire blowout.
Dang! I’ve heard of that happening
Nice... Now I know, thanks.
You bet!
Thank you 🙏🏿
You are so welcome
Wow amazing
Thanks men
You're welcome!
My shit broke like this but the plastic parts holding the metal rod broke. Fucking stupid extra shit now I’m down $150 for a replacement 😪
Damn. That sucks bro.
Ubersezen auf russisch 😊
You should have started the video from 3:15
Ubersezen auf russisch
too much bla bla
Thank you
You're welcome
Thank you !!!
Thank you