Thanks Kevin for this video - certainly it enabled me to replace the clutch on the same model which we have. As an amateur this ended up taking me a total of 24 hours after hitting a good few challenges, but got there in the end.
There are only a few people with such skills and determination, you are one of those. Total respect Sir and hope that you reap the rewards from your hard work - amazing!!
These videos show you how to change a clutch and the cars to stay away from or get rid if ya have one just incase the clutch might need doing one day, think I would rather do a mini clutch than one of these, my god the amount of work that went in to this respect to you Kevin 👍👍👍👍👍
You sir are a legend I just used your video as a guide to change the clutch on my galaxy spot on work one complaint you made it look easyer lol thanks for this video
Why am I fascinated by a man changing clutches ? maybe it is because I cannot do such a thing and respect this chaps hard work... looking forward to the next one sir x
I do them occasionally in the same manner, maybe like once a month over the non-winter months and I can tell you it's freakin hard work. Kevin does it day in day out, that's really tough.
Very well done and a great video 😊 The only thing I would have done differently is to use an ordinary manual torque wrench on the flywheel- and clutch bolts. My S-max is waiting for the same operation..
I also did it the same way after watching this a few times and hit plenty of amateur problems 😆 got there in the end though - after 24 hours worth of work 😂
I also bought the Milwaukee ratchet.. this was one of my best decisions ever made! Very nice tool! Milwaukee in generell is always a good choice Cheers ✌️
Enhorabuena. Quería preguntarte, cuando ves que alguna pieza esta mal, ¿le dices al propietario que tiene esa pieza en mal estado? Y si es el caso, ¿tu sueles cambiarla?
That regards bushes not balljoints and more specifically bushes which are mounted vertically . Tightening balljoints and horizontal bushes does not require suspension load only vertical bushes due to their movement.
great job Kevin, I think when ford put this one together they new only a ford specialist or a high spec garage can do this kind of work but they didn't think about Kevin-Albert Williams did they😁 say no more sorted👍👍
hi Kevin just another day at the office eh!! Looked very fiddly ford didn't make it to easy for the mechanic, but you always win through, great stuff,, keep up the great videos, and respect.
Makes my life in a shop look like a vacation, very nice work! What do you do if you find a large leak, faulty flywheel or slave cylinder or other damaged parts while doing these clutch? Say a broken or very worn out ball joint, CV shaft?
I'm going to do the same job on an S-Max 1.8, 2008 model. I assume it's pretty similar to what you've done? Some recommend taking down the entire subframe, but it looks like I don't need to? I'm also planning to convert to an SMF. I hope there won't be too much vibration. My local Ford workshop said I could do it, and that they have good experiences with it.
Getting horrible flashbacks to the worst job i've ever attempted on a car, our 07 2.0 S-Max! On our drive as well... took me about 3 days (half a day to work out how to disconnect the gear selectors!) to get the box off and I couldn't get it back on, called in a mobile mechanic instead I was knackered. I took the subframe completely off, didn't realise you could do it with it on! That would have saved some time.
What was this one Kev 2 hours to get to the clutch 10 minutes to change another 2 to put all back together lol .Nice job mate. Thats what put me off alot of jobs back in the day why couldnt they all be like the Vauxhall Astra and cavalier 20 minutes max😁
Oh wow Kevin you are like a SUPERHERO.. I’am amazed on what you have been doing.. and the impact drill.. could you please tell me Kevin what is the exact name and the brand of that Big and Small impact drill. Please please please.. you take care SUPERHERO 👏👏👏👏
new diesels have a very high torque on low rpms and the dmf does take away vibrations that causes. i have put smf in some cars and they gets some vibrations but they last forever.
Hi. I know this was awhile ago. Very interesting watching and thank you for sharing, I`am just about to do this on my 2007 Galaxy 2.0tdci, i have one question if you don`t mind, I noted that you didn`t use the special clutch plate tool, was this because the clutch pressure plate is brand new out of the box and was it already pre-set ?. Many Thanks.
Hi Kev I thought with all Ford subframes ( Mondeo Galaxy ) etc you have to use the Ford reline pins or else the subframe will be out of line afterwards...
Very true if you’re removing it completely. The trick is to leave one bolt firmly in place. Then it will remain exactly where it came down from when you push it back up..,, you’re with me
G'day Kevin I really like watching your videos it's remarkable how you have to on some cars remove so much to be able to get to the clutch, just curious as to how many cars would you work on in one week? Good to see you again stay safe kind regards John PS what was that hose for?
Hey Kevin have you done a clutch on a 2,2 Ford smax diesel ? Im half way through mine and im struggling for clearance for the removal of the DMF, thinking of just doing the clutch, DMF seems to be ok.
Kevin, the clutch pedal on my 2011 SMax sinks to the floor and doesn’t spring back. When the engine is running I can’t get it in gear, when it’s not running it goes into gear. Any tips would be greatly appreciated. It’s a Sunday and nothing is open.
that’s exactly the fault I had on my car and it turned to be the slave cylinder. Followed Kevin’s video to the letter but because my car is a 2,2 the gearbox is a lump compared to the 2,0 and I’ve barely got clearance. A couple of subtle differences. The slave cylinder/release bearing was shot (knackered). Good luck with whatever you decide to do, although I’m sure you’ve already done it.
why didn't you change the crankshaft seal? it is not an expensive part and since you changed the clutch it costs nothing to change it to avoid future oil leakage problems, hug
I would never replace a crank seal on its own as that’s bad practice. As it’ll be temporarily masking the issue., and deceiving the customer. If that seal leaks., equals = movement in the crank. Replace main and big end bearings. Then replace the seal = Job done correctly. Otherwise it shouldn’t leak. It’s constantly coated in oil so it shouldn’t go wrong. Simply = you wouldn’t have blisters if you’re wearing the correct size shoes.
He never has to bleed the system, And where's all the rounded off seized bolts that I always get ? And the wrong parts ? Some slick editing right there👍
@@WMCS fair enough mate , i didn't sit though it all . its my day job also . I would be concerned about the wear and tear on your body , at 43 and after 24+ years I'm feeling it and most my career has been inside garages . the wear to your spine ,neck, elbows and knees might catch up to you one day . Is it not time for a premises ?
@@WMCS One more question. LuK or Sachs as spare parts for replacing the clutch and dual mass flywheel? Or maybe Valeo? What is your ranking list based on your experience and practice?
I've got this to do, as well as afew other Jobs that need doing like rusting rear quarters on my 64 plate Smax unforgiveable really at such a young age. I've bought a 13plate Mondeo Estate to tie me over whilst im doing the work on the Smax and now my heart really isn't in it as I much prefer the Mondeo to drive.
Respect and few things, how you handle tools, are you army trained? How many hours in average one cars clutch takes to replace? My sef have repair hydraulic hoses in winter nights in forest,
That was some unmerciful strike on the steering knuckle for the ball joint, usually takes my 8 or 9 whacks of a hammer and even then I get an ouchie 😂😂
Kev respect to doing the TH-cam stuff , wished I'd got a camera lol the shit is the same day in day out lol last week all synchros Iveco Daily 64 plate today engine swap 66 plate fiesta . Tbh I hate Ford's but I'm mobile and work on folks drives , get the shit no one else wants ! I'd sooner work on plant and HGV's and used to convert trucks to LHD for 15 years for export
You want to get yourself your own number plate which has your business name on there, when filming stick out over the customer's number plate to disguise it.
@@WMCS you're not registering it to put on a car or your van, it'll just be for sticking on top of customers number plate whilst you film right. So you just need a plate made up for whatever you want it to read. Example online plates website www.ukshowplates.com/
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Thanks Kevin for this video - certainly it enabled me to replace the clutch on the same model which we have. As an amateur this ended up taking me a total of 24 hours after hitting a good few challenges, but got there in the end.
To carry out such task on the ground aswell as film! Respect!
There are only a few people with such skills and determination, you are one of those. Total respect Sir and hope that you reap the rewards from your hard work - amazing!!
Thanks John. Really appreciate the feedback.
I've done a few clutches in my time but never one like that! Your experience and professionalism came across quite well. Great video, thank you.
These videos show you how to change a clutch and the cars to stay away from or get rid if ya have one just incase the clutch might need doing one day, think I would rather do a mini clutch than one of these, my god the amount of work that went in to this respect to you Kevin 👍👍👍👍👍
It was a bit of a weird one this coming from Ford. But then again they are pretty much Peugeot now ...😁🍻
You sir are a legend I just used your video as a guide to change the clutch on my galaxy spot on work one complaint you made it look easyer lol thanks for this video
Why am I fascinated by a man changing clutches ? maybe it is because I cannot do such a thing and respect this chaps hard work... looking forward to the next one sir x
I do them occasionally in the same manner, maybe like once a month over the non-winter months and I can tell you it's freakin hard work. Kevin does it day in day out, that's really tough.
Very well done and a great video 😊
The only thing I would have done differently is to use an ordinary manual torque wrench on the flywheel- and clutch bolts.
My S-max is waiting for the same operation..
Basically a step by step guide to fitting a clutch to your S-Max I did it that same way and it went in without any problems
I also did it the same way after watching this a few times and hit plenty of amateur problems 😆 got there in the end though - after 24 hours worth of work 😂
I also bought the Milwaukee ratchet.. this was one of my best decisions ever made! Very nice tool! Milwaukee in generell is always a good choice
Cheers ✌️
Respect Kevin. Quiet holidays with your loved ones. Let's hear it and I will gladly follow what you post.
I’ll be taking my intimate machine for a drive ✨🥷😁.., right after a small morning repair.
You make it look so easy. Great job. To bad not in the Netherlands.
Every time I watch I learn something. Superb again thanks !
Thanks for the feedback and support John 🍻
Látszik ,hogy nem ma kezdted , nagyon nagy szakértelemmel szerelsz , grat !
Respect Kevin, I would end up with a box full of nuts and bolts😉
Enhorabuena. Quería preguntarte, cuando ves que alguna pieza esta mal, ¿le dices al propietario que tiene esa pieza en mal estado? Y si es el caso, ¿tu sueles cambiarla?
Respect, not to many can do it like this
Kevin great job, but tight the chassis parts only when they are loaded, you can use yours jack 1:12:00
That regards bushes not balljoints and more specifically bushes which are mounted vertically . Tightening balljoints and horizontal bushes does not require suspension load only vertical bushes due to their movement.
Wow was looking for a guide and you sir are a huge help ..... Gave me the confidence to do it myself thank you
Good of ford to make it so easy to do the clutch job what a pain well done
S-Max Titanium 2.0L what a great amount of work
Shit car to own,drive and repair
great job Kevin, I think when ford put this one together they new only a ford specialist or a high spec garage can do this kind of work but they didn't think about
Kevin-Albert Williams did they😁 say no more sorted👍👍
hi Kevin just another day at the office eh!! Looked very fiddly ford didn't make it to easy for the mechanic, but you always win through, great stuff,, keep up the great videos, and respect.
I believe it’s the Peugeot engine. Same as in the C4 ..,
Great video again👍👍
That ford needs new tyres too.
total respect you are a master at your job bro thanks for sharing your hard work
Thankyou.
Makes my life in a shop look like a vacation, very nice work! What do you do if you find a large leak, faulty flywheel or slave cylinder or other damaged parts while doing these clutch? Say a broken or very worn out ball joint, CV shaft?
You deserve every penny!!!
I'm going to do the same job on an S-Max 1.8, 2008 model. I assume it's pretty similar to what you've done? Some recommend taking down the entire subframe, but it looks like I don't need to? I'm also planning to convert to an SMF. I hope there won't be too much vibration. My local Ford workshop said I could do it, and that they have good experiences with it.
Merci encore pour la vidéo je suis vraiment fan et fière de toi encore bravo 👏👏👏
Salut 🍻🍻
Great work again Kevin . 👌👍
Getting horrible flashbacks to the worst job i've ever attempted on a car, our 07 2.0 S-Max! On our drive as well... took me about 3 days (half a day to work out how to disconnect the gear selectors!) to get the box off and I couldn't get it back on, called in a mobile mechanic instead I was knackered. I took the subframe completely off, didn't realise you could do it with it on! That would have saved some time.
What was this one Kev 2 hours to get to the clutch 10 minutes to change another 2 to put all back together lol .Nice job mate. Thats what put me off alot of jobs back in the day why couldnt they all be like the Vauxhall Astra and cavalier 20 minutes max😁
I see no logical reason why they can't have the removable cover on the bottom of all bell-housings like those Vauxhalls.
@@RustyShackleford66no money in it for the main dealers.
Очень крутая работа!!!
why's this so satisfyingggg
Nice work Kevin.
SEI UN VERO SUPER MECCANICO,, HO MAI VISTO UNO COME TE. COMPLIMENTI
Thank you.
Great video Kevin-
What is your release agent- acetone and hydraulic fluid or your own special sauce?
how old are you kevin and how long have you been doing this? you always know what to do on every car man! you are amazing!!
Kevin is amazing that he does not torque the bolt. Wow his hand must be amazing.
Bet you never forget a birthday hey 😅
Awesome as always 🔥 🔥
🍻😁🍻.,, photographic memory
Oh wow Kevin you are like a SUPERHERO.. I’am amazed on what you have been doing.. and the impact drill.. could you please tell me Kevin what is the exact name and the brand of that Big and Small impact drill. Please please please.. you take care SUPERHERO 👏👏👏👏
They’re not Milwaukee Fuel.
Certainly know your job. that impact wrench certainly excellent tool
DMF. How did we manage for all those years without them?
new diesels have a very high torque on low rpms and the dmf does take away vibrations that causes. i have put smf in some cars and they gets some vibrations but they last forever.
Very nicely!! One bit of tech that is truly unnecessary. Unless your the manufacturer.
Kevin, when will there be a video of the trip to the engine overhaul?!!
My van engine you mean ..,
@@WMCS Not!!! Clients !!!
Only clutches
@@WMCS Clear! Time is money!
Here it is 😁, was that the turbocharger above the driveshaft? How long was this job? So much dismantling. Cheers for the vid 👍🏻
That’s the one. A bit frenchy this one was.
🙏 thank you my friend.The clutch ninja 🍻🍻
Thankyou maverick .., always a great support of the channel..,, I’m gonna visit you in person one day 🍻🍻🍻😁
@@WMCS Awesome !!! I am not very very far from you (no calais).I'm going to learn my English right away 🤣🤣🍻🍻
I need a new dmf and clutch on my 2010 s max. How much do you charge?
www.williamsmobileclutch.co.uk
That was so involving. Respect!
Hi. I know this was awhile ago. Very interesting watching and thank you for sharing, I`am just about to do this on my 2007 Galaxy 2.0tdci, i have one question if you don`t mind, I noted that you didn`t use the special clutch plate tool, was this because the clutch pressure plate is brand new out of the box and was it already pre-set ?. Many Thanks.
All you need to do is use the clutch alignment tool. And be sure to tighten the bolts down in a figure 8 in increments of about 4 turns at a time.
Not another s max?? I know what’s involved removing all those plastic trims what a pain. Keep up the great work.
Better than a Haynes Manual 🤣
Hi Kev
I thought with all Ford subframes ( Mondeo Galaxy ) etc you have to use the Ford reline pins or else the subframe will be out of line afterwards...
Very true if you’re removing it completely.
The trick is to leave one bolt firmly in place. Then it will remain exactly where it came down from when you push it back up..,, you’re with me
@@WMCS
Thanks for the reply 👍
Bjrs si c étés moi je fait trois jours tu es un héros merci une belle vie et trés bon santé merci
G'day Kevin I really like watching your videos it's remarkable how you have to on some cars remove so much to be able to get to the clutch, just curious as to how many cars would you work on in one week? Good to see you again stay safe kind regards John PS what was that hose for?
at the near end of it ?it for fill up gear box oil
Great job. How Long you need in real for the Work ??
IM Enjoying watching this cuz when i do it myself i didnt notice how it looks from "GOD's" View :D
Молодец!👍
New subscriber and I’m gonna be your follower now and forever 👏👏👏
Thankyou
Well done sir. Nice and clean
Thanks
Hey Kevin have you done a clutch on a 2,2 Ford smax diesel ? Im half way through mine and im struggling for clearance for the removal of the DMF, thinking of just doing the clutch, DMF seems to be ok.
Plus that box weighs a lot more I think, or you are jacked and make it look light. 😂
how many miles has the car been driven before new clutch and flywheel
What a blinding tool the cordless ratchet is !
It’s excellent., life wouldn’t be the same otherwise
Just curious.......why do you start the Milwaukee ratchet, before putting it on the bolt?.........does that not sometime round the bolt head........
It breaks the seal a lot better than cracking it with the head already spinning.
Don’t drive the tool half committed otherwise it will slip.
@@WMCS thank you sir......
Hi . The construction is a same in ford galaxy?
Bravo!!! 💪🏻👍🏻👏🏻👏🏻
what happens when you need to program. relearn. purge.some carts is needed?
Kevin, the clutch pedal on my 2011 SMax sinks to the floor and doesn’t spring back. When the engine is running I can’t get it in gear, when it’s not running it goes into gear. Any tips would be greatly appreciated. It’s a Sunday and nothing is open.
Either the master or slave cylinder.
that’s exactly the fault I had on my car and it turned to be the slave cylinder. Followed Kevin’s video to the letter but because my car is a 2,2 the gearbox is a lump compared to the 2,0 and I’ve barely got clearance. A couple of subtle differences. The slave cylinder/release bearing was shot (knackered). Good luck with whatever you decide to do, although I’m sure you’ve already done it.
why didn't you change the crankshaft seal? it is not an expensive part and since you changed the clutch it costs nothing to change it to avoid future oil leakage problems, hug
I would never replace a crank seal on its own as that’s bad practice. As it’ll be temporarily masking the issue., and deceiving the customer.
If that seal leaks., equals = movement in the crank.
Replace main and big end bearings. Then replace the seal = Job done correctly.
Otherwise it shouldn’t leak. It’s constantly coated in oil so it shouldn’t go wrong.
Simply = you wouldn’t have blisters if you’re wearing the correct size shoes.
@@WMCS Always replace the seal. It wears with age, especially on a 2010 car.
He never has to bleed the system, And where's all the rounded off seized bolts that I always get ? And the wrong parts ? Some slick editing right there👍
That is the real deal. You’re looking at every nuts and bolts that I touch.
Bleeding is in there. Watch the full video🍻⛅️
@@WMCS fair enough mate , i didn't sit though it all . its my day job also . I would be concerned about the wear and tear on your body , at 43 and after 24+ years I'm feeling it and most my career has been inside garages . the wear to your spine ,neck, elbows and knees might catch up to you one day . Is it not time for a premises ?
Very professional
How many hours for an average mechanic?
I was quoted 7-8 hours work from local mechanic.
I have really loud flywheel rattle.
That’s the book time. And it’s correct.
That tyre has seen better days was down to the wires
Máquina...
❤KEVIN❤
Bro, Did u find the "Bracket" of the thrust bearing at 25:56 it happens to me so often xD
Hi Kevin. I know this was awhile ago. What grease are you using at 49:00?
Red rubber grease
@@WMCS One more question. LuK or Sachs as spare parts for replacing the clutch and dual mass flywheel? Or maybe Valeo? What is your ranking list based on your experience and practice?
Have u ever replaced an exo x transmission
Not as of yet .,, what are they like.
Witaj, co to za smar masz "ten czerwony"? :)
I've got this to do, as well as afew other Jobs that need doing like rusting rear quarters on my 64 plate Smax unforgiveable really at such a young age. I've bought a 13plate Mondeo Estate to tie me over whilst im doing the work on the Smax and now my heart really isn't in it as I much prefer the Mondeo to drive.
Respect and few things, how you handle tools, are you army trained? How many hours in average one cars clutch takes to replace? My sef have repair hydraulic hoses in winter nights in forest,
Hats off to you for tackling repairs in the night of winter.
Thanks for the feedback much appreciated 🍻🍻
36:17 where is that oil leak coming from? I have it on mine and seen it more or less on every 2.0.
I think from high pressure injector pump gasket
That was some unmerciful strike on the steering knuckle for the ball joint, usually takes my 8 or 9 whacks of a hammer and even then I get an ouchie 😂😂
That’s it. One hit wonder
👍👍
How to blead air for clutch chlinder
Super!!!
how much?
Long should that take in a workshop mate?
Book time says about 6hrs
Good job
Here comes the superman ...........................
🍻
Not bad lad but have you been on a big job ? 👍
How big of a job are we talking 🍻
Kev respect to doing the TH-cam stuff , wished I'd got a camera lol the shit is the same day in day out lol last week all synchros Iveco Daily 64 plate today engine swap 66 plate fiesta .
Tbh I hate Ford's but I'm mobile and work on folks drives , get the shit no one else wants !
I'd sooner work on plant and HGV's and used to convert trucks to LHD for 15 years for export
Always great to hear from a fellow mechanic. Sounds like you’re having all the fun out there .,
Much respect to you. 🍻🍻🍻
@@WMCS I'm 50 soon , looking for a new avenue lol
Loss the mittens lol 😆
Wow..... i wanted to change mine same way on the ground but i think i rather pay someone.😮😮😮😮
👏🏻
Top💪💪👍🛠️
👏👏👏👏🍺🍺🍺🍺
Byte av framhjulslager på ford s max
You want to get yourself your own number plate which has your business name on there, when filming stick out over the customer's number plate to disguise it.
That’ll be an idea. They cost a small fortune tho.
@@WMCS No shouldn't cost more than £20, probably get one for much less than that
I always thought it was for the rich and famous. I’ll have a look online. 🍻🍻🍻
@@WMCS you're not registering it to put on a car or your van, it'll just be for sticking on top of customers number plate whilst you film right. So you just need a plate made up for whatever you want it to read. Example online plates website www.ukshowplates.com/
I’m with you now. I will take that advice Thankyou.
top jobb :)
Thank you.
I had one of those ford powersh!t.
Had to get rid of it.
That Ford should be called "Bracketmax" instead. Brackets on brackets on brackets.
I think the bracket trophy might go vauxhall 😁… makes ford designers look professional., which are French really. 😂
Just wau
🛠NINJA10🛠👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻