Hei! Takker for hyggelig tilbakemelding. Her kan du se flere filmer til din bil: th-cam.com/play/PL49_oNMpZ73UeAsBJ_9WDiJZX5lorNewj.html Ha en fortsatt fin dag! Mvh Studio - Bildeler.no
You messed up the alignment of the strut mount and the bearing when impacting the nut at the end, this will cause a lot of steering issues for the driver.
I assembled both sides on my car like this and I am experiencing some issues that was not possible to adjust, probably need to take everything down. Any references to the correct procedure?
@@TheKrypt0000 bearing has to located into top mount In a certain way, there's a tab that goes up through a hole in the top mount. Then the tab on the side of the top mount needs to line up with the pinch Bolt area on bottom of strut, and the tab on the roller bearing needs to be 6 degrees to the right of the top mount tab for the right side. Or six degrees left for the left side
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
Perfect video. Thank you!
Super video,, Thanks you
Thank you very much for the great video.
It helped me a lot
i know I am kinda off topic but does anyone know of a good website to stream newly released movies online ?
@Kamden Cristiano Lately I have been using flixzone. Just google for it :)
@Elon Briar Yup, been watching on FlixZone for since march myself :D
@Elon Briar Thanks, I went there and it seems like a nice service :) I really appreciate it !!
@Kamden Cristiano You are welcome :)
Thank you
Hvordan bytte jeg starter for en Ford smax 2007 1,8
Hei, tusen takk for den videoen 👍👏👏👏
Hei! Takker for hyggelig tilbakemelding. Her kan du se flere filmer til din bil: th-cam.com/play/PL49_oNMpZ73UeAsBJ_9WDiJZX5lorNewj.html
Ha en fortsatt fin dag!
Mvh Studio - Bildeler.no
thank you 👍
Good job! A lot of rust visible, is this normal? I do not recognize at all with my Ford Galaxy from 2009!!
It's Norway, rough conditions here
You messed up the alignment of the strut mount and the bearing when impacting the nut at the end, this will cause a lot of steering issues for the driver.
I assembled both sides on my car like this and I am experiencing some issues that was not possible to adjust, probably need to take everything down. Any references to the correct procedure?
@@TheKrypt0000 bearing has to located into top mount In a certain way, there's a tab that goes up through a hole in the top mount. Then the tab on the side of the top mount needs to line up with the pinch Bolt area on bottom of strut, and the tab on the roller bearing needs to be 6 degrees to the right of the top mount tab for the right side. Or six degrees left for the left side