hi sir! can you help me with this: when I run the program it gets error shows that " no matching function for call to 'SoftwareSerial::SoftwareSerial(const int&, const int&)' " how can I can solve this?
While connecting my nodemcu with blynk in my robot car ....it connects and disconnects time to time...if posible kya reasons ho sakte hain please clear kijiyega......
Since u have mentioned about gsm based GPS tracker u must upload and if u have uploaded the link should be in description box. Otherwise it was quite nice tutorial
bhai apka bhot acha tutorial tha . koi esa project den jis me car wghera k liy gps system bna sken gsm gprs or gps k sath jo direct firebase pr location, speed, direction send kr skay ya agr apka koi esa project already bna hwa hay to please link share kr den . or please gsm gps module bhi suggust kren . thanks a lot of thanks from dubai
Sir. After i run the coding, it already connected to blynk and more. But the reading of latitude and longitude didnt show. it show " No GPS detected: check wiring. " . do you have any idea how I can solve this? Thanks a lot sir.
Hi, I have a uni assignment project like this. Can you please send me step by step instructions for this project. Especially the programming and how to add baterry.
@@santhoshthirunavukkarasu3929 unfortunately, I was unable to identify the problem. My suggestion for you is find another tutorial. P.S it works for a split second so I don't know if it was a bad GPS module or the code.
RoboShala good day sir do you have an email address? I do have some questions I was able to implement this project but im having issues because the map does not update as often as the data is gets
the status in satellites is "gps error", so it cannot read longitude and latitude in the blynk application, whereas in the serial monitor the status is "no gps detected: check wiring". so what do I have to do in order to function properly, I hope this message is replied. Thank you sir.
Go to board manager of your arduino software and search for esp8266 and before doing this add a json link which you get from github and paste it to preference and then install the board it will work fine .
Can you tell me which GPS is best for more accurate position, because we have lots of gps modules available in market like SKG13BL, ultimate, ublox neo 6M, NEO 6M, NEO M8N, ublox neo7M, sain smart neo 6M. Please help to find out best gps module that can work with either Arduino uno, nano, Node mcu E866 etc. Thanks waiting for your reply.
Can u please provide the link for tinygps++ library... sir its really urgent... iam doing this project and its not working because of the wrong library file.
@@RoboShala it cause an error ... If it is possible than pls can un check it... practically... Bcaz i trying number of times ... But error is same for every time...so pls request to uh...
+Vaibhav Dalmia Will share you some of the pdf files on Arduino and basic sensor...by sunday !! When i will start posting the Arduino programming tutorial series... So, wait for two more days...
Sir, with the help of this video.. i have done the project.. but the serial monitor is showing only unknown symbols. The gps module is reading data.. but it is not able to display it. And i did't get the correct library tinygps++. I think that's the problem. Can you please provide the link where i can get the required library
Greattttttt project sir.. we are thankfull to you for thisss... and we are waiting GSM based tracking system with blynk... kindly make aa video on it sirrr... pllz...
A ROLE OF A PERFECT ENGINEER TEACHER IS PERFORMED BY U. THIS SHOULD BE TAUGHT IN EVERY COLLEGES BECOZ THERE ARE ENGINEERS WHO ONLY KNOW GPS FULL FORM
You solved my 2 months problems. I am a subscriber of ROBOSHALA now. Very thank you
hahaha! DOSTO AP KO MERA LOCATION PTA CHAL GEA.... you are great buddy :)
Can i replace the wifi module with a sim800l gsm module?
Internet connection is required always?
Yes.
@@RoboShala thank you
Hi can you please make a Tracker video using the ESP32+Sim800L TTGO board and Blynk....thanks
Very good quality of video tutorials!
hello sir...my gps module showing data on serial monitor as well as on app also..but its not showing location in map
Sir is project mai Nodemcu ke sath Sim800l use ho sakta hai. internet ke liyen
sir when i am programinng eroor is coming "no matching function for call to 'SoftwareSerial::SoftwareSerial(const int&, const int&)"
sir....u din teach how to use nodeMCU...u din show your setting node mCu
Can I use esp01 module. It has the serial pins. And this device only needs it. If yes help me with the modification of the code*
No Gps Detected : Check wire connection
Please Help me
It could be the tx and rx swapped
Can we use our mobile instead of our laptop....
hi sir! can you help me with this: when I run the program it gets error shows that " no matching function for call to 'SoftwareSerial::SoftwareSerial(const int&, const int&)' " how can I can solve this?
I'm getting the same problem, please help thank you.
@@danish5202 sorry but i still don't know how to resolve it. If you get a way how to resolve it plss comment here. Thanks.
I have the same problem , the solution is... Go to board manager.. Remove nodemcu new version and install the old version... This will work
@@jpstudio-tamil797 Thank you for the solution, but what do you mean by old version? Is there a link I can download it from, it would be great help.
@@jpstudio-tamil797 thanks for the info. :)
Sir with engine off hota aur acha hota please 4 channel relay k sath kysy hoga help me thank u
vai, the code is showing error for gps++ library.. why ??
thank you sir .. very use full... bt waiting for gsm based tracker .... please make tutorial for that
im getting problem on code "checkGPS' was not declared in this scope" can you help me?
Compass module would help it show the proper directions
While connecting my nodemcu with blynk in my robot car ....it connects and disconnects time to time...if posible kya reasons ho sakte hain please clear kijiyega......
may i know. what baud that you use?
Excellent, good stuff !
Great project but it said that tiny gps ++ library not found and some other libraries also not found.
Please help because I have to make a project.
It will work if device WiFi and Mobile WiFi is different? Means I can setup this in vehicle?
Since u have mentioned about gsm based GPS tracker u must upload and if u have uploaded the link should be in description box. Otherwise it was quite nice tutorial
Can it be used with otg
Sir can in use sim 800l + gps module and arduino nano instead of nodemcu(esp8266)
Han han
Which board is selected to coding
as a shareholder a relay from the blynk application through the gps?
Will that work indoor?
bhai apka bhot acha tutorial tha .
koi esa project den jis me car wghera k liy gps system bna sken
gsm gprs or gps k sath jo direct firebase pr location, speed, direction send kr skay
ya agr apka koi esa project already bna hwa hay to please link share kr den .
or please gsm gps module bhi suggust kren . thanks
a lot of thanks from dubai
Does the nodemcu always have to be connected to a network?
do you know what is the range of the distance ?
can a dongle e attached to node mcu
Works when connect to pc and serial monitor but after connecting to powerbank it doesn't works
Sir. After i run the coding, it already connected to blynk and more. But the reading of latitude and longitude didnt show. it show " No GPS detected: check wiring. " . do you have any idea how I can solve this? Thanks a lot sir.
Hi, I have a uni assignment project like this. Can you please send me step by step instructions for this project. Especially the programming and how to add baterry.
The video explains everything..and you can visit my website www.roboshala.com for the written content.
ok thank you so much
on the blynk app I got gps error on satellite button on the bottom. can you please help?
@@idabagusnarayana9699 Even I am getting the same! did you resolved the issue uh?
@@santhoshthirunavukkarasu3929 unfortunately, I was unable to identify the problem. My suggestion for you is find another tutorial. P.S it works for a split second so I don't know if it was a bad GPS module or the code.
A very big Thank You from your new friend...!!!
please help me I use this program but I have a problem of No GPS detected: check wiring.comment I can solve it
hello always has to be connected to the computer?
No, anywhere it can get power - e.g: a battery pack.
I'm waiting your upcoming. Video gsm based /gps tarker
Tnankyou Very Much Sir...giving this Information
NICE WORK!!!
does the marker move real time? like if I move from one direction to another does it also change without any refreshing needed
+J L0486 Yes, it updates the loaction and direction in realtime.
RoboShala good day sir do you have an email address? I do have some questions I was able to implement this project but im having issues because the map does not update as often as the data is gets
Hello my friend your proyect is excelent i see box plastic that you use for gps could say me where to buy it
+giancarlo mejia The box is not a special one.
It was the ordinary box that i got with an earphone set.
the status in satellites is "gps error", so it cannot read longitude and latitude in the blynk application, whereas in the serial monitor the status is "no gps detected: check wiring". so what do I have to do in order to function properly, I hope this message is replied.
Thank you sir.
The device need to be connected to internet to send latitude and longitude??
+Leonardo Morales Yes, you are right !
Here i am using a Hotspot device naming " JIO" for the internet connectivity .
Hello. NodMcu is connected with my wifi network. How does it comunicate when unit is of my network range?
No such file or directory
#include
I am getting this error..!
I am using esp8266 and Arduino UNO..And NEO 6M GPS module..!
Please help.
Bhai, follow the getting started with nodemcu video and install the esp8266 boards ...
Go to board manager of your arduino software and search for esp8266 and before doing this add a json link which you get from github and paste it to preference and then install the board it will work fine .
how to do it on arduino uno or mega, they don;t have esp8266
Can you tell me which GPS is best for more accurate position, because we have lots of gps modules available in market like SKG13BL, ultimate, ublox neo 6M, NEO 6M, NEO M8N, ublox neo7M, sain smart neo 6M.
Please help to find out best gps module that can work with either Arduino uno, nano, Node mcu E866 etc.
Thanks waiting for your reply.
how to make a road navigator when their is a cut they alert you please help me about this
Can we do this using a GSM module instead of the wifi dongle
Can u please provide the link for tinygps++ library... sir its really urgent... iam doing this project and its not working because of the wrong library file.
Love ur channel and attitude!
🍉🍊🍋😎😍😘😄
i have connected this as shown in ur video but no led is blinking and no data is found
First, just upload the tinygps example code to see, if gpsmodule is working properly.
@@RoboShala okk
Node mcu blynk app se srevo motor ko kaisa control kiya jaya us k upar koi video bansia
+Debjyoti Roy Chowdhury Simple hai.. Next video me home automation using blynk app hai...usss se apko idea mil jaegaa
RoboShala lakin is project k liya jo codo cahiya wo kaha se mila ga......and next video jaldi upload kijiya
+Debjyoti Roy Chowdhury description me diaa hua hai...code !! Check kro...
Necessary ho tbhi cmmnt kro..
RoboShala kuch shamaj me nahi aaia..... kya app mujha srevo motor ka code mera what's app me de shakte hai???
RoboShala please sir
Coordinates are still showing even though gps isn't connected and no direction and speed some random character are there, what is the problem?
Bhai...hum yahan apne smartphone ke gps reciver ko use kar sakte hain kya?
what about the gsm + gps tracker?
sir what is the range?
Accuracy is around 5-20 meters
my header files are not changing its colour to orange. It remained only in black. Can u help me
is same hotspot connect with nodemcu and blynk ??
Not necessary.
Both are independent.
@@RoboShala it cause an error ... If it is possible than pls can un check it... practically... Bcaz i trying number of times ... But error is same for every time...so pls request to uh...
Can u plz suggest me any book or something by which i can know more about the uses of the arduino boards and their coding and their working principle
+Vaibhav Dalmia Will share you some of the pdf files on Arduino and basic sensor...by sunday !!
When i will start posting the Arduino programming tutorial series...
So, wait for two more days...
Sir, with the help of this video.. i have done the project.. but the serial monitor is showing only unknown symbols. The gps module is reading data.. but it is not able to display it. And i did't get the correct library tinygps++. I think that's the problem. Can you please provide the link where i can get the required library
Have you done the project
prathipaty noel yeah
I just want to print lat and long values on serial monitor can u please help with the code
More then 2 tracker laga sakte he 1 app me
Vai agar mai nodemcu ko bahar le jao out of wifi connection then what will happen?
very good presentation bro .
Sir gps tracker me wifi ki jagah kisi Sim ke through kaise kar sakte hain.
Really good work!
Is that necessary that mobile and nodemcu should be connected to same network
My GPS module doesn't light up when connected to 3v nd serial monitor doesn't show any values
Same issue. Can you help me out, if it is solved now?
Try to use the hardware in open space. And, make sure the Vcc and Gnd are connected rightway.
Mere paas ek gps tracker hai but jis shop se liya tha wo ab permanently band ho gyi hai kya hmara gps tracker fir se activate ho skta hai
Do u have tutorial adding ADXL335 in ur GPS tracking?
Sir 1. GPS module ta change kora jabe? Jate accuracy aro valo hoy.
2. Compass sensor add kora jabe?
3. Kotha theke kinte parbo?
Or isme Kya material lageha or manufacturerinh material Kha se milega
hi, how to pair with hotspot
excellent contribution Friend
keep going on brother...u r dong well..
Code is not opening please
Anduiuno nano jo tumne use kiya tha uska link do na
There will be one error come that is " 'checkGPS' was not declared in this scope " how to solve it???
Blynk is now upgrade
I unable to built it...
How to download the libraries
Can a node mcu be used without a server near it pls answer pls
Very helpful project sir
My GPS tracking device first 2month shows correctly but now the display shows ??????? Or shows ??0/ showing . Plz say the problem.
Could be add a geofence function and a button to activate a relay? Or even a speed notification or alarm notification. (I´m thinking in a car)
can i connect this module to +5V
Yes, you can connect.
Greattttttt project sir.. we are thankfull to you for thisss...
and we are waiting GSM based tracking system with blynk... kindly make aa video on it sirrr... pllz...
Thank you! Helped me a lot!
u can connect to the blynk?
Is there an offline map without internet? If so, what's the point of gps without offline maps?
I want to connect the gps module to arduino uno r3 where to connect the vcc of the gps module 3.3 v or 5v?
if u use neo 6m gps module it can work with both 3.3v or 5v bcs it have built-in voltage regulator
Hey hi, it was a good watch. I have one question for you, how did you connect the NODEMCU to’ WiFi?
what is the blynk library do I need to use? apparently it keeps on saying connecting to blynk
hello sir mera serial monitor main bas . ?????????????????????????????????????????? show kr raha hai problem kahan pe hain
can you share the code, please
I can insert sim card
Ek no. Bhai
getting this error..!
No GPS detected: check wiring.
No GPS detected: check wiring.