Great, but it doesnt make a sense to make a GPS tracker depend on the "static" Wi-Fi connection. That means you can use GPS tracker only when connected on your Wi-Fi - location will be always the same :)). Would be great the same with SIM800L etc. I mean real GPS tracker
Excuse me sir. I followed already all your instructions. Coding Run okey, The gps module blinking red which indicate connected to wifi. but why in my phone th blynk doesnt appear the latitude , longitude and all the readings. Help me sir.
it is nice work i would appreciate your help with gps module because in most time there is no signal have you any idea to get stable connection with gps in outdoor tracking please .
gps not blinking.have put outside for more than 1 hour still no.pretty sure connection ok.when i take out gps and put it back led turb on but then off again no blinking.can help?
Can Blynk map display more than one GPS signal ? my position and 3-4 more GPS signals from 3-4 arduino devices ? Or is it possible to gather all that GPS signals to one aruino and then send them all together to Blynk map? Thank you very much for your time. You have my respect.
Yes, it's possible... Just put the required amount of maps in blynk and change the pin of the map to some virtual pin and write the value from the GPS module to the map. Hope it helps.Regards
Bro can we send Gps coordinates to node mcu From the Mobile wirelessly over internet..? If it possible how? That received coordinates should be stored in nodemcu.... Or it can be displayed on olid display.
No sim port in this module so when we install this module in my vehicle and my vehicle go in other city so can i track the location of my vehicle from at home???
yes you can track your beloved car frame anywhere in the world as long as the esp 8266 is connected to a wifi or phone hotspot and even you can track it if it is in America also
On the part where we put network name and password can we put code that can be continuously try to connect to any open WiFi?? And how can we integrate a GSM module so that we don’t rely on WiFi connection?
Satelite is not detected. When I checked the serial monitor, it says no "GPS detected, check the wiring". I have already checked the wiring and there are no mistakes.
I think this circuit already want to connect with the phone via Nodemcu wifi connection. So when we fix this circuit to a vehicle, we can't get the location from home. So, Sir give a solution for that.
the node mcu is connected with the blynk server but in serial monitor i get "?????????????????" this kind of output and in blynk app i get it is online since some time n date but no output.. it doesnt show any output please help please
Sir suppose my friend lives in Mumbai and live in Kolkata if i give this gps to my friend can i connect my smartphone with the gps from kolkata to mumbai?
Indeed, your phone must be connected all the time at the NodeMCU's hotspot, otherwise the app will not be able to receive GPS data. Moreover, in order to visualize the map you must need a data connection.
@@ramraghu100 i used it directly i think it depends on the service provider but if your sim has a lock,,,it can unlocked by putting a line in the void setup:- // Unlock your SIM card with a PIN //modem.simUnlock("0000");
Make Women Safety system. Jab bhi push button per pesh karenge Ghar per live location Chala jaega + message Chala jaega ki main idhar hun mujhe help kar e a 🙏🏻
But in this way you can only track the location when the tracker is inside your home, otherwise the tracker will lose wifi signal and it will not work anymore. Any idea to solve this?
Hey brother nice work If I will place the GPS module to 10 -15 CM away from its original position will the serial monitor show different value What us the minimum distance in which the data of GPS changes
Hi, Anyone can answer my question pls. I need an explanation is that project still work even its in different place? Like the gps is in the car and the smartphone is in the house?
Hi, Great tuto!! Do you think it's possible to add something to put the tracker in sleep mode when not used? My idea is to connect the tracker to the vehicle's battery in order to charge it when the contact is ON and when it's OFF then a 18650 could take over. With that we could use the tracker 24/7 and when the vehicle start it can charge the 18650.
Sir sorry to interrupt, but I want to make it , But I am not able to make the map widget as it need subscription Can u provide a solution or a free version of the aap please ?
ALHAMDULLILAH, Your video helped us alot. Thanks for the video, You are just awesome. Keep it up. Really appreciate your work.
Great, but it doesnt make a sense to make a GPS tracker depend on the "static" Wi-Fi connection. That means you can use GPS tracker only when connected on your Wi-Fi - location will be always the same :)). Would be great the same with SIM800L etc. I mean real GPS tracker
This is what I commented
I agree with you, totally useless. waste of time.
this is not a realtime GPS tracker.
Without GSM module it's hard to call it a tracker...
SIR PLEASE TELL WHERE THE HEADER FILE IS??????????????????????
i tried it and it worked thanks from🇷🇺🇷🇺🇷🇺
Excuse me sir. I followed already all your instructions. Coding Run okey, The gps module blinking red which indicate connected to wifi. but why in my phone th blynk doesnt appear the latitude , longitude and all the readings. Help me sir.
sir thank you very very very much i wanted to make this progect for a long time
Thank you for your awesome work! Your video is the only one on TH-cam that helped me!
it is veru cool but i have a question can we see about location by computer not a phone
You need to add an GSM module if you want to use it in real world otherwise is just to be use around the house if you are in the coverage area.
That's the confusion here
Thank you very much, very helpful to me and I am grateful to practice it once again thanks
Thank you bro, Its work fine in terrace only bro.
Just curious - once it's out of range of your wifi, how will it update its location for push notifications when there's no onboard gsm chip?
yes bro I have the same question about that.... plz answer......
Great project but to transmit the GPS signal it is necessary that l4esp is always on the Wifi so I do not really see the interest!
it is nice work
i would appreciate your help with gps module because in most time there is no signal have you any idea to get stable connection with gps in outdoor tracking please .
Thank you. Your clip is good details.
Good job! is the map for pay plan only? also the widget box? thanks.
gps not blinking.have put outside for more than 1 hour still no.pretty sure connection ok.when i take out gps and put it back led turb on but then off again no blinking.can help?
Thank u sir for the video. Keep continue upload more video. Good luck
sir, I have tried running but in Blynk it still says GPS ERROR. can u explain?
and also, the longitude and latitude not shown on Blynk
@@NorHashimahDasuki_ASM yes, me also. akak dah jumpa ke solution?
We can use Arduino nano instead of nodemcu
This tracker needs internet connection on both sides
It's better to use gsm based system that would not require internet
Nice project 👍
Hi man nice view. One question this gps tracjer need some sim card to work or no
Can Blynk map display more than one GPS signal ? my position and 3-4 more GPS signals from 3-4 arduino devices ?
Or is it possible to gather all that GPS signals to one aruino and then send them all together to Blynk map?
Thank you very much for your time. You have my respect.
Yes, it's possible... Just put the required amount of maps in blynk and change the pin of the map to some virtual pin and write the value from the GPS module to the map. Hope it helps.Regards
Broo, I'm getting error, I'm not getting latitude and longitude in serial monitor, I'm getting junk values, 🙁🙁
nice brother. can you make a long rang plane with gps ???
Hi, i have a question. can we control blynk map widget to find places like convenient store etc?
Good for basic understanding of gps but useless in the real world without gsm module
Bro can we send Gps coordinates to node mcu From the Mobile wirelessly over internet..? If it possible how?
That received coordinates should be stored in nodemcu.... Or it can be displayed on olid display.
Super project 👍👍👍
No sim port in this module so when we install this module in my vehicle and my vehicle go in other city so can i track the location of my vehicle from at home???
yes you can track your beloved car frame anywhere in the world as long as the esp 8266 is connected to a wifi or phone hotspot and even you can track it if it is in America also
thanks for this video, I however have a TTGO TCALL board, how can i use it for this kind of project
Bro what means no such file or direction? After I verify came out that
i have same problem. could you help me brother
@@sabinghalan1149 same goes to me, do you have a solution?
On the part where we put network name and password can we put code that can be continuously try to connect to any open WiFi??
And how can we integrate a GSM module so that we don’t rely on WiFi connection?
Satelite is not detected. When I checked the serial monitor, it says no "GPS detected, check the wiring". I have already checked the wiring and there are no mistakes.
could u please help us, sir?????
led is not blinking in the GPS location Tracker
I like node mcu projects
But I want this to be used in vehicle tracking. In that condition, how to use bro. If u checked that it works when it kept in closed box..
Hi may i know why my gps module doesn’t blink at all? Did i need to do this in open places?
I think this circuit already want to connect with the phone via Nodemcu wifi connection. So when we fix this circuit to a vehicle, we can't get the location from home. So, Sir give a solution for that.
Wow, how cool is that?! Thanx man!
Is it working only if both mobile phone and nodemcu are connected to the same wifi?
does it need internet?to work or do it need to connect it to my phone to track?
the node mcu is connected with the blynk server but in serial monitor i get "?????????????????" this kind of output
and in blynk app i get it is online since some time n date but no output.. it doesnt show any output please help please
If this gps system is far from home ,I mean no internet connection in nodemcu, it will work?
Sir suppose my friend lives in Mumbai and live in Kolkata if i give this gps to my friend can i connect my smartphone with the gps from kolkata to mumbai?
Yes
can i used any arduino board other than nodeemcu,,,,,like arduino mini pro /nano
Thanks for this tutorial! Do you have one for raspberry pi?
Cool One....!!
So it has to be connected to the WiFi the whole time? 🥺
Indeed, your phone must be connected all the time at the NodeMCU's hotspot, otherwise the app will not be able to receive GPS data. Moreover, in order to visualize the map you must need a data connection.
What's the point of a gps tracker that needs connecting to your WiFi?
you can use it without wifi also
@@joerivera7407 how ?!
@@mohamedmamdouh8862 using gsm sim module in place of wifi module
@@joerivera7407 So, using GSM module, have to insert sim a d activate through call? Or inserting sim would be sufficient? Please clarify.
@@ramraghu100 i used it directly
i think it depends on the service provider but if your sim has a lock,,,it can unlocked by putting a line in the void setup:-
// Unlock your SIM card with a PIN
//modem.simUnlock("0000");
Great !!
esptool.FatalError: Failed to connect to ESP8266: Timed out waiting for packet header
this is the error. can u help us
Does it still work if the phone far away from the gps tracker?
Make Women Safety system.
Jab bhi push button per pesh karenge
Ghar per live location Chala jaega + message Chala jaega ki main idhar hun mujhe help kar e a 🙏🏻
Does it only work inside your home Wlan?
Would it also work using a Keywishbot BLE Nano V3.0, Mirco USB Board Integrate CC2540 BLE Wireless Module ATmega328P 5V Micro-Controller Board?
can it works for a long distance???? like 1 or 2 kilometers
Why do we need to connect it to wifi, will it not work if it is not connected to wifi????
Hello, Great video! but where can I get the code? your website is down?
Super bro 👌
what if the wifi module hadn't connection? a simcard could it be used instead for providing internet?
yes, use a GSM module
@@mclo-fi1276 thxs bro
the location data is not showing on my blynk app. can someone help me out
But in this way you can only track the location when the tracker is inside your home, otherwise the tracker will lose wifi signal and it will not work anymore. Any idea to solve this?
Hey brother nice work
If I will place the GPS module to 10 -15 CM away from its original position will the serial monitor show different value
What us the minimum distance in which the data of GPS changes
Hi, Anyone can answer my question pls. I need an explanation is that project still work even its in different place? Like the gps is in the car and the smartphone is in the house?
Hey can i use this gps module in sp f3 evo flight controller?
Thanks. How we can install it and use for real time scenario. WiFi is not available in the vehicle
What kit do you use to build your projects?
I have a doubt, whether this project can work irrespective of distance(1000km) between mobile and gps locator or can't without a distance?
Distance between them doesn't matter
Can this be simulated online? if yes using which platform?
What if we don't have a WiFi nearby? Will we get the location?
This guy is a waste of time he never replies to questions give a thumbs down
Hey guys, my GPS light is not blinking even after uploading the code and following all the steps what should I do now ?
I'm using ESP32 instead of ESP8266 but it does not show anything on serial monitor and Blynk App,,, please assist
Did it always need WiFi?
Nice
Sir do you have this videeo but with esp8266 remote serial port wifi
Hi, Great tuto!!
Do you think it's possible to add something to put the tracker in sleep mode when not used? My idea is to connect the tracker to the vehicle's battery in order to charge it when the contact is ON and when it's OFF then a 18650 could take over. With that we could use the tracker 24/7 and when the vehicle start it can charge the 18650.
Can it be used on a high altitude probe?
hello
when i disconnect ESP32 with my computer ,i lost connexion between ESP32 and WIFI
can you help me for This problems
Bro isko PC me kaise GPS location dikhaye
Thanks for sharing
do you have any idea how to make the gps tracker without using wifi or sim
I hold several patents on IoT, AI fields. This is useless, only a school project. Only works when you are in the pre configured wifi AP.
how to use GPRS and track the GPS. (Lets say we don't have Wifi and I use GSM module for getting GPRS network).
Does it works without the WiFi connection?
What is the use of wifi here and How can I make the same without wifi or bluetooth
It's working with jio router..?
It is possible to display all codes in the Arduino program
Hey bro can I use SIM800L in state of NEO 6M GPS...
Hii bro i want this project for my project work. I want to contact to buy yhis
I need to interface accerometer to detect free fall along with gps module with nodemcu , can i get the code logic
3:28 wifi of computer or mobile???
Sir sorry to interrupt, but I want to make it , But I am not able to make the map widget as it need subscription Can u provide a solution or a free version of the aap please ?
Thanks a lot.
I have ESP32 and not 8266. Will it work
On which software this program runs ?
Is it possible to connect Nodemcu and cellphone, not with home network but to cellphones hotspot?
Yes, you can connect it with cell phone hotspot
Can i use google assistant to use this gps tracker?
Love your channel, only a fan of you.
sir... can i use this projek for my projek ☺️