Thank you for the video. I have six devices using Blynk v1 and was a little confused about setting up v2. Your video helped. I’m a little sad Blynk v1 will eventually be discontinued but I understand why it is being done. We non-professional Blynkers have been ‘freeloading’ for quite a while. Looking forward to more videos on this subject.
I tried to use a esp8266 with a arduino uno but a I’m getting 10 different fail messages all worked but the arduino stuff had a problem when I used the example I got a fail warning with the user_interface.h i asked chat gpt for help but it didn’t work and this was just the biggest fail message I got I also got Exit status 1 and other little things so can you create a new vid where you do it with The esp8266 instead i think it will help a lot off people including me I even changed where you took you esp thing to the esp8266 even the example
So with the first blynk you could simply connect your phone to a device with Arduino IDE and then add and remove buttons without altering the code , so now for example I need to rewrite code with 30 virtual pins on a Arduino Mega plus 5 other devices I'm using around the house which doesn't sound like an improvement for me.
Please make a tutorial on the without internet like you did for the previous platform as in the previous one we used the wifi library to configure and connect to our wifi but in this blynk is handling the connection. Can you ease make a no internet video for the new blynk cloud
Absolutely brilliant. Thank you. I've used Blynk for some time and this overview of v2 is exactly what I needed. May I ask why you don't use a current limiting resistor in series with your LED?
I got the esp set up done well, everything connected finally. Though I am having trouble seeing how to connect the LED to the breadboard. I am a complete noob, sorry, but I am trying. Could anyone explain how the LED is connected? or even link a diagram or something? Honestly I do not even know where pin 15 is, or how to wire that. Maybe I have been at this too long and I am going crazy. But thank you for your help. It is much appreciated
Please 🙏make a video on how we can change in old blynk code to run our old projects on new Blynk app using some changes in code it will Boom on internet
Thanks for your help. I don't understand why I got this error to compile my first temple. "exit status 1 'class axTLS::WiFiClientSecure' has no member named 'setTrustAnchors'". Can you help me? Best regards.
sachin bhai can make a vedio for 4 channel realy control with node mcu 8266 i try to do with node mcu 8266 but i can,t ,,,,,, my bro if you can make it???? it will be very usefull for me .. or if you have any link of code and you will share with me it will also goood,, please do something for me , thanks bro
Thank you for the video on Blynk new. They are all very helpful. I followed all the steps that you have given int this video and got successful in the first time. But after that my esp8266 board is not connecting to my iphone. The device hotspot is not shown in already connected devices. can you help with what might be the issue. I tried resetting esp8266 board, powered on and off modem, cleared and reinstalled blynk. but nothing is working out.
Thanks, dear. I was struggling to get my first program working until I came across your video. It was very clear and I was able to follow it easily. Except in the beginning when I tried to create the new template on web dashboard I got a message "You cannot create product for this Organisation" or something close to it. I had to go to settings and turn on the developer mode and then I was able to create the template and from them it was smooth.
hello, i have some problems adapting the simple led blink that you have on your video onto my wemos d1 mini... maybe you could help? i have this error: 'class axTLS::WiFiClientSecure' has no member named 'setTrustAnchors'
Thank you for the video! It was really easy to understand. But I got a problem, I had followed all your step but it still didn't work. when I click the switch, the notification said that the device is offline. Would you please help me to get the device online?
Bro can u please make full detailed video how to connect the nord mcu to wifi of my phone , if i connect to wifi of the nord mcu my internet doesn't work , please share the solution
Belive me guys, this is the best channel for IoT. You will find everything related to iot.
True
Blynk server link to GitHub gives a 404 error why this is happening? It got remove. will it become no longer open source???
Same issue what to do
WTF ? Why is my comments been remove?
Really???
Thank you for the video. I have six devices using Blynk v1 and was a little confused about setting up v2. Your video helped. I’m a little sad Blynk v1 will eventually be discontinued but I understand why it is being done. We non-professional Blynkers have been ‘freeloading’ for quite a while.
Looking forward to more videos on this subject.
whats that mean
This is far easier than the other tutorials I have found
Thank you for this video. I am trying new BLYNK app but i was not successful , but after watching your video I succeed. Thank you very much.🙏🙏🙏
Glad to hear this.
Do share this with others as well
Keep Sharing Keep Supporting
The newer version of Blynk allows Digital and Analog pins.
I am waiting for this video from last one week sir
Waited whole day for this 🤧💥
Now enjoy making 😇
@@techiesms pls upload home automation in new blynk app
Thankyou Sooo muuchh Your Helping me A LOT Thanksss soo much keep the good work up
wow your videos are amazing. big fan from Bhutan
Hi there nice video, could you please explain the code so we can make our own projects.
BTW Awesome videos
UPDATE: Now Blynk 2.0 has digital pins too!
it is easier, but it only goes up to 13
Thank you very much this one changed my learning process
YOUR ALL VIDEO'S ARE SUPER HELPFUL AND INFORMATIVE TO ALL OF THE PROJECT MAKERS.
THANKS 💙
How to use this with unity for augmented reality projects ?
Thank you!! you were a big help!!
Dude! Fantastic video….I saw SO many videos trying to introduce Blynk-for-Dummies….this is by far one of the best!! We’ll done 😊
If you speak Urdu or whatever language this dude speaks then you are OK
Thanks! Only solution that worked for me
I tried to use a esp8266 with a arduino uno but a I’m getting 10 different fail messages all worked but the arduino stuff had a problem when I used the example I got a fail warning with the user_interface.h i asked chat gpt for help but it didn’t work and this was just the biggest fail message I got I also got Exit status 1 and other little things so can you create a new vid where you do it with The esp8266 instead i think it will help a lot off people including me I even changed where you took you esp thing to the esp8266 even the example
Thank you so much Brother...i had tried this project it's working.....
Bro can u please explain how to use analog pin of esp32. Using new Blynk
So with the first blynk you could simply connect your phone to a device with Arduino IDE and then add and remove buttons without altering the code , so now for example I need to rewrite code with 30 virtual pins on a Arduino Mega plus 5 other devices I'm using around the house which doesn't sound like an improvement for me.
Very good video, congrats!
Thanks 😊
Please make a tutorial on the without internet like you did for the previous platform as in the previous one we used the wifi library to configure and connect to our wifi but in this blynk is handling the connection. Can you ease make a no internet video for the new blynk cloud
By the way, let's say we want to insert the Wifi details directly from the IDE; what do I do in this case.
Please make a tutorial on esp32 cam board by making camera to control aniware
Super video, waiting for more tutorials
Can you please explain analog pin to control led brightness
thank you so much for this video!
Absolutely the best tutorial video on this I have found after days of searching. Thank you so much! Very personable and great energy!
You're very welcome!
can't understand what this guy is saying, how can you call this a good tutorial
Absolutely brilliant. Thank you. I've used Blynk for some time and this overview of v2 is exactly what I needed. May I ask why you don't use a current limiting resistor in series with your LED?
Green LED 5mm. . . . Voltage = 3.5V, similar to ESP32 Digital Output.
Thanks for the help getting me up and running with V2. Great video
Indian tutor always the bestt
Bro,Is there Any Voice Control provision is updated to control device from new Blynk App??
They will soon provide integrated Alexa and google assistant support
I got the esp set up done well, everything connected finally. Though I am having trouble seeing how to connect the LED to the breadboard. I am a complete noob, sorry, but I am trying. Could anyone explain how the LED is connected? or even link a diagram or something? Honestly I do not even know where pin 15 is, or how to wire that. Maybe I have been at this too long and I am going crazy. But thank you for your help. It is much appreciated
Do the programming part wiring part is easy ..man
So much amazing
I will try this project
Nice video.
voiceflow can be used to control by voice commands in this new app.
Very Nice video. I have question that all devices are connected with same wifi? or we can control it all over the world?
I would like to do this and have manual push buttons to start and stop a pump. Can you help me add in buttons in the code?
could you please show us how to use slider?
Please how to add more virtual pins for more devices?..
Great
Does it support sharing like the old one?!
Is possible to put the sensor output on that like for example height of water using ultrasonic
Can you make tutorial about notification and email for new blynk ? Please🙏🙏🙏
me too . I want know how i can send notification using new Blynk . i searched and tried to send it but i failed .
Hello, great video!
I want to know if Blynk makes it possible to have the status of the LED updated if you also have a physical button.
How do I setup a virtual led when a switch makes?
Nice tutorial!
Hi , can you tell for how much you bought the lora 800mhz . I want to know the exact price to see if I it is too expensive only in my place
Sir a code explanation for the new Blynk Edgent will be really helpful
Brother can you use arduino with esp01 with new blynk app, it will be helpful. Thanks for this amazing video👍👍
I have done up to 13.53 exactly but I am not able to control the LED by app / Web cloud.
Please 🙏make a video on how we can change in old blynk code to run our old projects on new Blynk app using some changes in code it will Boom on internet
Nice tutorial !
Please make a video if we want to develop a commercial product using esp8266 for business purpose
Bro , ican'yt able to find that EDgent sketch example as shown over (I've included the library too.....) anything am missing
Where can i find your Blink LED code?
Hi. your video content really helps us in our research. I'd like to ask if Blynk has a feature where can input?
Hi aju nice start with blynk 2.0 ,plz add timer and fan dimmar function in next video
clear and understandable explanation thank you bro
Thanks for your help. I don't understand why I got this error to compile my first temple. "exit status 1
'class axTLS::WiFiClientSecure' has no member named 'setTrustAnchors'". Can you help me? Best regards.
Thank you for this new video.
I want to know how to share the created application with other phones
Well, if u don't have "auth-token", how to connect with google assistant and webhooks?
What should i add in code for connecting wifi module (esp8266 wemos d1 r1) to connect with wifi or hotspot????
Digital pins should have been included.
Just think the same project form this video could have been made without any modifications in code@
Helpful video. I'm having a hard time converting from the old version to the new version
thank you very much your contenct is amazing!
Can you please make the video on multiple MFM METER PARAMETERS taken in IoT
Sir could you pls expain how text input widget works on blynk?
very useful video thanks for helping me
Thanks a lot !
Hi ..nice video...which platform do you prefer .. Arduino iot ...or blynk...
Also please tell me ..why
Hello, may i ask if blynk app is capable of sending notification in multiple device?
thanks my brother.
Great presentation! i have question how to add bylnk library on raspberry pi ?
Hello,
What I add in arduino code in order to read some Analog value, from A0 for example?
Thanks!
great video guidelines 👍
Thanks! 👍
If i want to use 2 input(2 sensor) and 2 output,i need to pay or not?
kindly make a blog (Video) on TTGO T-call SIM800L board with GSM Connectivity in New Blynk IoT.
Plz upload one video on zeRGB control.plzzzzzzzzzz
Thank for the video bro🤘 is it possible to use multiple devices in same dashboard?
No one device one dashboard
sachin bhai
can make a vedio for 4 channel realy control with node mcu 8266
i try to do with node mcu 8266 but i can,t ,,,,,,
my bro if you can make it???? it will be very usefull for me ..
or if you have any link of code and you will share with me it will also goood,,
please do something for me ,
thanks bro
power bro, are they compatible with wemos d1 r2 yet?
thanks a lot it helped me a lot in
Thanks so much for the video. The link to download the free version of Altium does not work. I was not able to download it.
Thank you for the video it is very exlante
Hello sir
Can you tell how we can make an app for over the air programming of nodemcu ??
led is not glowing after the whole procedure pls help me out what to do?
Thank you for the video on Blynk new. They are all very helpful. I followed all the steps that you have given int this video and got successful in the first time. But after that my esp8266 board is not connecting to my iphone. The device hotspot is not shown in already connected devices. can you help with what might be the issue. I tried resetting esp8266 board, powered on and off modem, cleared and reinstalled blynk. but nothing is working out.
hye,
This project using esp32
Can I using esp8266 nodeMcu with same wiring, code and changing type of board at blynk app?
Please help me resolving my PCB issue , deigned in Altium 😔
can you show your schematic?
Thanks, dear. I was struggling to get my first program working until I came across your video. It was very clear and I was able to follow it easily. Except in the beginning when I tried to create the new template on web dashboard I got a message "You cannot create product for this Organisation" or something close to it. I had to go to settings and turn on the developer mode and then I was able to create the template and from them it was smooth.
how can you say that? That guy can't speak English
can new blynk app use follow me feature?? i would like to make follow me cooler but the blynk cant support bluetooth , what should i do please help.
hello, i have some problems adapting the simple led blink that you have on your video onto my wemos d1 mini... maybe you could help? i have this error:
'class axTLS::WiFiClientSecure' has no member named 'setTrustAnchors'
Can I do all the stuff on my PC intead of my cellphone?
Nice one bro. Waiting for the Blynk API TFT display remote you mentioned in the previous video.
Working on it 🔥🔥
Blynk server link to GitHub gives a 404 error why this is happening? It got remove. will it become no longer open source???
Very very awesome project !!!
Can you guide me how to use Blynk v2.0 to connect to google home?
Thank you for the video! It was really easy to understand. But I got a problem, I had followed all your step but it still didn't work. when I click the switch, the notification said that the device is offline. Would you please help me to get the device online?
Hi , can you explain how to use menu widget ?
Sir,can you explain how to edit the old blynk app code for the new blynk app
Bro can u please make full detailed video how to connect the nord mcu to wifi of my phone , if i connect to wifi of the nord mcu my internet doesn't work , please share the solution