explain to me. i almost wanna buy Blynk IOT service. seeing this video, is this gmaps service you teach me ' free to use'? If you move around, is it going to follow the coordinate like how gmaps usually do it when you drive?
@@znafesa3790 basically the ESP32 already has a fixed IP, now you can get that IP by looking at the IP in the list of connected WiFi users, so you can see it directly there
I followed all the steps successfully but in serial monitor I can't see the ip addres instead I take ip from my hotspot where the ESP is connected with but even I put that ip in my web browser I didn't shown any result ..please help me
In my location it may not ever connect as I have my house with metal roof and trees around. The Neo6m needs to see open sky for the first fix and then it may take a long time. The next time it connects it should be much faster as it will have updated the ephemeral table so it knows which satellites are available. Another option is to use a Beitian BN-220 as that series seems to be more sensitive and can find satellites easier.
can you do? like having battery on it? lithium batt i wanna use it on our capstone to use it to track real time a boat can i use this? please do so i have no clue using arduino we gonna be on web based can you do my request as one of your subscriber please
Used same code only changing WIFI credentials and the NEO-6M does not even start flashing. ESP board works fine as Blynk demo worked fine and connected to network and updated info in Blynk cloud. Theres something youre missing in video. Edit: some tutorials dont take into account the real mpdule volts, so it never boots up. What the maker of tutorial does not say is that your chip could and possibly has MINIMUM requirement of 3.5-5.5 volts, but esp board only provides 3.3 volts.
The board takes an hour sometimes to start blinking when it gets its first coordinates. I had this issue too until I left it plugged in and came back later to find it working.
Hi, like i got ip address but when i entered it, in 'latitude' and 'longitude', no values are being displayed! Please help
Check your GPS led status
@@TeachMeSomething yep, it's working. Thank you!
explain to me. i almost wanna buy Blynk IOT service. seeing this video, is this gmaps service you teach me ' free to use'? If you move around, is it going to follow the coordinate like how gmaps usually do it when you drive?
Hi sir, Can You tell with respect to change in latitude and longitude coordinates, in google map locations will also change
Yes. It will change
any chance it will integrate with Home Assistant?
Could anyone please send the pic of neo-6m gps module and wifi module connected to the arduino.
Does that type of pic is there?
It's node mcu
If I connect this gps to the car's usb, does the gps have to be connected to wifi or not?
For gps function Wifi not required.
For getting the data wifi or simcard required
I have followed all the steps correctly, but when I enter the IP in Chrome, nothing appears, the fan just keeps loading, please help
laptop & program wifi should be the same
Iam also facing the same issue. Did ur issue solved
@@muhammadaslam8484 yes i succeeded but not the IP from the serial monitor is taken, but it is taken directly from the ESP32 IP
@WawanTjk how did you get the ip from esp32?
@@znafesa3790 basically the ESP32 already has a fixed IP, now you can get that IP by looking at the IP in the list of connected WiFi users, so you can see it directly there
Nodemcu board kachray sa uthaya tha 😂😂
Hey, i have a doubt that Anyone can see the live location if i share website link
how to make a web app for this project?
Could you please sat How to install library for nodemcu esp8266
hi sir, will IP addres change every time upload the code?
NO, BUT IT WILL WHEN YOU CONNECT IT TO A DIFFERENT NETWORK
How about using to raspberry pi?
I followed all the steps successfully but in serial monitor I can't see the ip addres instead I take ip from my hotspot where the ESP is connected with but even I put that ip in my web browser I didn't shown any result ..please help me
After open serial monitor press reset button in nodemcu
@@TeachMeSomething yes I did but it not appears whether I want to change any html or js code to display the map?
@@TeachMeSomethingsame issue here no ip addresss coming up even after reserting
that nodemu board has seen things 💀
Sir, Please do a tutorial on how to do this tutorial on raspberry pi 4 or 5.😔🙏🙏🙏🙏
I have neo6m gps module but not working not tracking satillites
Watch my video & try
try outside or near window where sky is clearly visible
In my location it may not ever connect as I have my house with metal roof and trees around. The Neo6m needs to see open sky for the first fix and then it may take a long time. The next time it connects it should be much faster as it will have updated the ephemeral table so it knows which satellites are available. Another option is to use a Beitian BN-220 as that series seems to be more sensitive and can find satellites easier.
Can i use this tutorial if I'm using esp32 ?
Yes. Possible
@@TeachMeSomething can you tell me what to change in the coding if using the esp32 , please I'm still learning
@znafesa3790 needs to change the library header for esp32
@@TeachMeSomething okay thanks I will try !
YEP
what if im not in the same wifi network with the nodemcu ? can i still access the ip address ?
No
can i use this tutorial if im using the ublox m8n?
NO BRO
Can you provide Component specifications list
ESP8266, NEO GPS 6M, JUMPER WIRE AND MICRO USB TO USB CABLE
I get the IP address but when I put it in browser it doesnot show
Your browser also should connect with same wifi
can you do? like having battery on it? lithium batt i wanna use it on our capstone to use it to track real time a boat can i use this? please do so i have no clue using arduino we gonna be on web based can you do my request as one of your subscriber please
I will check it..
@@TeachMeSomething Thank you Ill wait ser
excuse me can I please have the code for the this project?
It's in the description, you little brat !
Do I use NodeMCU (ESP-12E) even when I use a ESP8266?
Yes
@@TeachMeSomething thanks
Used same code only changing WIFI credentials and the NEO-6M does not even start flashing. ESP board works fine as Blynk demo worked fine and connected to network and updated info in Blynk cloud. Theres something youre missing in video.
Edit: some tutorials dont take into account the real mpdule volts, so it never boots up. What the maker of tutorial does not say is that your chip could and possibly has MINIMUM requirement of 3.5-5.5 volts, but esp board only provides 3.3 volts.
If not flash it will not work
The board takes an hour sometimes to start blinking when it gets its first coordinates. I had this issue too until I left it plugged in and came back later to find it working.
@psi3000 👍👍👍
this only I am telling to all.
But all are expecting to work in 5 min.
Blynk isnt exactly free, map is behind some subscription
Is this service free of cost???
No
@@TeachMeSomethingthank you and is there any alternation option? Or any other way we can built free of cost? Do reply
how much did you need to pay for using google cloud service?@@TeachMeSomething
BUTOO LAAA
I have followed all the steps correctly, but when I enter the IP in Chrome, nothing appears, the fan just keeps loading, please help
*Connect your laptop with same wifi.
*. Get IP address from serial monitor.