i made this project 5 years back, the trigger/sos button was hidden in watch/ornament that you are wearing. its easy to activate the sos via external trigger than to reach out for the device in times of emergencies. Improvements: 1. Battery 2. Sleep mode: to save battery life 3. A high pitch buzzer to alert the nearby people 4.Save the latitude /longitude on a ftp server to track the location later and many more which i implemented in my project
Bro, I never have seen this kind of GPS tracking system, it is so easy, so compact, and, I have no words, how much good it is. Grand Salute for you,,,,,,,,,,,,,,
It's great if you can also have a speaker to talk to someone sitting on your bike and tell them to get off or just have a conversation with them using this. I'm trying to make a motorcycle alarm and remote but also with internet and GPS like this for a long time.
Super project . Please add mic and speaker in the project. It will be really helpful in emergency situation. I will be a super project for safety for all women and children etc.
What say about your projects! THIS ON IS THE BEST! And yeah! I am really looking forward to the DIY Phone call.... and I am sure it will be uploaded in approximately 10 days...my experience says! Anyways, Keep Up The Smart Work, Man! And nice features for emergency....
Great Work... It would be awesome if you can make it work as a more complex vehicle tracking project,... like cutting power and also tracking your vehicle without having to press any button, just by activating it in some kind of standby mode
Hey great video😘, was just curious, what is the battery capacity you used, and did you test what is the run time you are getting for continuous monitoring?
Well explained sir. Appreciate your dedication. If you can add kill engine feature and geo fancing option it will be amazing. Thanks for sharing your great knowledge and ideas.
1st in blynk app you select ESP32 dev board and in coding you select wrover module.I am confused about this.why you select different board in 1 project??please kindly clear this fact.
Hi, finally you did and it’s very nice. This project will be more fruitful if few changes/ additional features like setting geo location alert which sends the sms to mobile application if the vehicle moved from set geo location and need some inputs to find engine starting and stopped condition, inbuilt battery low level sms, and outputs like can immobilise the vehicle when command from the application if needed. And the important is all data like apn can we update OTA like what you did previously entered credentials in Blynk OTA.... my requirements may be added more but those or worth to added. Thanks for your knowledge sharing with us👍🏻
7:44 yes! Have been searching that project for quiet a while... so please make an emergency cell phone. Also, Your videos on IoT related projects are the best!!!
what battery i can use instead of lithium polymer 3.7v battery? lithium polymer is kinda dangerous when it's getting hot, and i need to put that gps device on my bag so the battery might getting hotter in that bag
I've setup the whole system and im having a few doubts.. 1) should we insert the sim card in the ttgo tcall board or just entering our phone number in the code is enough? 2) my neo 6m gsm module is not tracking any satellites even outdoor.. (led not blinking) 3) will the code uploaded in the ttgo tcall board be erased each time we switch it off or will it be present in the module all the time?
When i try to order PCb for your gerber file which is having more delivery charges (35 dollars) and board cost 7 dollars. How we can order cheap PCB board?
Hello! can you plz guide me; how to use this idea in giving every owner of this technology info about another vehicle to avoid accidents? just like V2V technology?
Bro in one live video with you when you making a real-time feedback home automation project. At that time you ask us which project, I have to make in my next video then I suggest u make a women safety project so we can use it in the emergency period. Bro, finally you make it. I just want to make like this project for girls & women. Personally, I am so happy because you complete the words which you committed to your audience.
Sir i have a question... Does this device can connect to more than one smartphone ?? Suppose if the the blynk app is installed in one phone and that phone is busy, but we want to track the tracker , can we do with another phone ???
I have faced an issue with Node MCU. The module keeps on disconnecting with the MQTT broker and it stops accepting any commands. The module has to be rebooted to make it work again. Is there any solution for that? Thank you
Yes expecting project like device like small GPS with panic SMS and call (tiny emergency device) button , and device should able to call specific person after pressing button and saying his or her name . As we can see in " taken "movie by --- Liam neeson(Bryan mills) and device can be operated through voice commands like : call George , send location to George. . .
Have you try it for about 3 - 5 hours? I have done this before, and it always getting error, because the gps always give a lot of "information" and blynk has its own limitation, i dont know, maybe its about tiny gps library or maybe siftware serial, did you use void check gps??
Can i use Esp32 to do the same thing? or is it possible to do 2 type of codes in the board mean 2 different functionalities like first is to get gps and second for other operation?
If I have a 4G module paired with ESP32, how can I share the 4G internet using ESP32 hotspot? So I can also have a Wi-Fi hotspot on my motorcycle with a working internet connection and it's not only a web server without internet connection.
In emergency times, it is very difficult to long press for contact other people..... It should be design to make call and msg without being a long button press on project board...
Sms is good feature, but you can make another blynk virtual pin and give it value either 0 or 1, and make an app that has maps or gps navigation software implemented, so when value on that v pin is 1 which means it's emergency, the app could send the notification and when you open it navigation is already started without you having to find the maps and then type the coordinates. I'm overthinking this simple invention, probably sms with ready coordinates to copy and paste is enough 😅
I have been just getting started with the board ttgo lilygo. When power up for the first time the led on the board were flashing as I Have uploaded blank sketch after that I'm not getting any response to any of code which is uploaded. Not even serial monitor prints any msg or led flashes. Any troubleshooting suggestions will be appreciated. Thanks
please help me, can you add a Fingerprint to the esp32sim800l module to turn on the motorbike, so I want to make security on my motorbike using a fingerprint and Gps tracker.
i made this project 5 years back, the trigger/sos button was hidden in watch/ornament that you are wearing. its easy to activate the sos via external trigger than to reach out for the device in times of emergencies.
Improvements:
1. Battery
2. Sleep mode: to save battery life
3. A high pitch buzzer to alert the nearby people
4.Save the latitude /longitude on a ftp server to track the location later
and many more which i implemented in my project
Please, can you share link to your project, I am working on similar idea but, I need help.
Can i get the link pls
Finally bro I was trying to make this same project since a year
Happy making 😇😇
@@techiesms plz do it with TTGO T-SIM7000G Module ESP32
@@aniszed3641 agree, would be so useful no videos yet with that product
The link you have provided isn't working for code and circuit diagram
Bro, I never have seen this kind of GPS tracking system, it is so easy, so compact, and, I have no words, how much good it is.
Grand Salute for you,,,,,,,,,,,,,,
Do make it by yourself and share with me
I would love to see that
@@techiesms Sure, I will do, Definitely.
do you make the projects@@yogendrajamsariya1193
This was great, i wonder if it would be possible to draw route of the tracker to the map? Was thinking about making gps collar to the dog :P
U could probably export the data to Google maps
It's great if you can also have a speaker to talk to someone sitting on your bike and tell them to get off or just have a conversation with them using this. I'm trying to make a motorcycle alarm and remote but also with internet and GPS like this for a long time.
Sir the link provided for the pcb and circuit , is not working
My GPS doesn’t function after I finished the project. Can u give me some advice?
You have the GPS Modul connected to RX and TX from the LilyGo T-Call board. But what are the pin numbers for the serial?
Super project .
Please add mic and speaker in the project.
It will be really helpful in emergency situation.
I will be a super project for safety for all women and children etc.
What say about your projects! THIS ON IS THE BEST! And yeah! I am really looking forward to the DIY Phone call.... and I am sure it will be uploaded in approximately 10 days...my experience says! Anyways, Keep Up The Smart Work, Man! And nice features for emergency....
I’ll make that
But I don’t think it’s possible within 10 days 😅😅
I want to see you holding TH-cam Silver Button as soon as possible 😍
Great Work... It would be awesome if you can make it work as a more complex vehicle tracking project,... like cutting power and also tracking your vehicle without having to press any button, just by activating it in some kind of standby mode
hey can we use an arduino instad of using esp
Hey sir we dont have that type of node mcu also maybe it is not available on amazon.
It’s available on.m banggood
I have mentioned it’s link in description
@@techiesms If possible try to make this using nodemcu or esp32 board.
This is bit costly to purchase from banggood and ship in india.
Great Vid. May I sugest you convert the format to that of Google maps. And send that text. An easier way to to see the location. Thanks
Sir there are some error so after connecting this with pc we can solve those problem.
Can I connect a gsm module to normal esp32 and upload same code. Well it work?
I too want to know the same
yes I also need to know this. please answer it...
It could work with a ESP32 without the GSM module? (Of course without the SMS/Call phone function too)
hello techiesms, does the TTGO TCALL board charge the battery attached if you plug in type c usb?
Yes
@@techiesms thank you very much
Hey great video😘, was just curious, what is the battery capacity you used, and did you test what is the run time you are getting for continuous monitoring?
Well explained sir. Appreciate your dedication. If you can add kill engine feature and geo fancing option it will be amazing. Thanks for sharing your great knowledge and ideas.
add a relay
Really Good and very usefull to our present situations sir I hope you make many projects all the best bro
Yes! it is mandatory to be able to make telephone calls.. Thanks for your amazing and ilustrative video..
I have made the same exact circuit.,but the phone call notification didnt work at all.,only sms worked well
What would the schematic look like if I did not use the emergency features?
1st in blynk app you select ESP32 dev board and in coding you select wrover module.I am confused about this.why you select different board in 1 project??please kindly clear this fact.
Very interesting project... I was looking for such a project. Thank you sir
Hi, finally you did and it’s very nice. This project will be more fruitful if few changes/ additional features like setting geo location alert which sends the sms to mobile application if the vehicle moved from set geo location and need some inputs to find engine starting and stopped condition, inbuilt battery low level sms, and outputs like can immobilise the vehicle when command from the application if needed. And the important is all data like apn can we update OTA like what you did previously entered credentials in Blynk OTA.... my requirements may be added more but those or worth to added. Thanks for your knowledge sharing with us👍🏻
7:44 yes! Have been searching that project for quiet a while... so please make an emergency cell phone. Also, Your videos on IoT related projects are the best!!!
Hi the link to your article isn't working, can you help me with that?
Thanks for sharing your expertise.
Please how can I interface a camera with using the same board in this project?
Sir the above mentioned link about code and connections is not opening
You deserve more Subscribers. Always made great projects with details explanation.
Love from Bangladesh.
what battery i can use instead of lithium polymer 3.7v battery? lithium polymer is kinda dangerous when it's getting hot, and i need to put that gps device on my bag so the battery might getting hotter in that bag
Does this work on the new version of Blynk?
rather than that this video helps me a lot in my college project, thank you very much.
Acha hai but aur chota hona chaheye GPS tracker ek 3x1 inche size and good appreciation also.
All the best
I've setup the whole system and im having a few doubts..
1) should we insert the sim card in the ttgo tcall board or just entering our phone number in the code is enough?
2) my neo 6m gsm module is not tracking any satellites even outdoor.. (led not blinking)
3) will the code uploaded in the ttgo tcall board be erased each time we switch it off or will it be present in the module all the time?
Excuse me do yo know how make a SOB feature (storage on board) mark locations when there is not gsm signal
And can I use blink application on multiple devices at the same time ? Will it work ??
Can't we send a link of location which direclty open in Google maps app. So emergency contact person can track us easily
Is it possible to add gps pattern tracking of start to end point?
I"M making a safty band and this was really helpful but i just wanted to see if you can still have a map on the new blynk app
When i try to order PCb for your gerber file which is having more delivery charges (35 dollars) and board cost 7 dollars. How we can order cheap PCB board?
It gives an error that there is no such file or directory in the blynk library. can you help me?
When you go out for the test, does it need a internet to work?
Is it possible to add a live stream camera also with it and also a l293d moter driver for controlling motor?
Hello! can you plz guide me; how to use this idea in giving every owner of this technology info about another vehicle to avoid accidents? just like V2V technology?
bro i want to store the history of vehicle location ........how can it be done
Hey the article link isn't working for the code/PCB, please update the link! Great work!
How can i store the data of latititude and longitudes on an S.D card or on my phone after every hour
Thanks for this me bahut sare vdo search kiya but finally jo muje chaiye tha mila but i have a doubt how can we charge the battery please bolo
sir , its compalsory need sim card to send sms and call ? or it can able to send msg without sim ?
Great Presentation followed by great work ! with your help we are moving forward , thank you very much guy ! big thumb .
It's a wonderful project 😊😊... I think should be design for register multiple numbers to send msg and calls...
Bro in one live video with you when you making a real-time feedback home automation project. At that time you ask us which project, I have to make in my next video then I suggest u make a women safety project so we can use it in the emergency period. Bro, finally you make it. I just want to make like this project for girls & women. Personally, I am so happy because you complete the words which you committed to your audience.
You make electronics fun again!
instead of sending Lat long as SMS text, you can also send a map link with lat long params. Opens directly in map.
Sir i have a question... Does this device can connect to more than one smartphone ?? Suppose if the the blynk app is installed in one phone and that phone is busy, but we want to track the tracker , can we do with another phone ???
hello sir can i ask does the nodemcu need to connect to any network ? or it can work in offline mode ?
Do you know what could be the reason I get a compile error for the Esp32 wrover module board? Can you help me please?
Can I send video esp32cam through gprs gsm module directly without wifi connection
I may work in without Network coverage area like hills ??
U are good G but I think the sms should also add your last location city or area
I have faced an issue with Node MCU. The module keeps on disconnecting with the MQTT broker and it stops accepting any commands. The module has to be rebooted to make it work again. Is there any solution for that? Thank you
Sir neo 6m gps module disconnect ho jaa rha. Koi best gps module bta dijye which is better then neo 6m
It's really awesome , keep doing and we are waiting for portable phone ( add mic and speaker)
Dear techiesms, Can we make this setup in nodemcu with neo 6m components without WiFi? Because we are placing this module in bike or car?
Excellent video I really liked, a question is possible to view two or more devices on the same map. Example person 1, person 2, person 3....
For that you have to create different hardwares and different project on blynk
Please do the same task using some other boards instead of TTG TCALL BOARD like arduino, etc. Please bring a video soon, waiting eagerly!
Yes expecting project like device like small GPS with panic SMS and call (tiny emergency device) button , and device should able to call specific person after pressing button and saying his or her name . As we can see in " taken "movie by --- Liam neeson(Bryan mills) and device can be operated through voice commands like : call George , send location to George. . .
Have you try it for about 3 - 5 hours? I have done this before, and it always getting error, because the gps always give a lot of "information" and blynk has its own limitation, i dont know, maybe its about tiny gps library or maybe siftware serial, did you use void check gps??
Hello SIr
I am Having trouble with Ublox Neo GPS 6m Module It doesn't search any satelites at all please help
I make the same board of yours, but it wasn't work. Pls help me! I live in VietNam
hello want to ask can i use this without the sms and call function?
Can i use Esp32 to do the same thing?
or is it possible to do 2 type of codes in the board mean 2 different functionalities like first is to get gps and second for other operation?
instead of messaging latitude and longitude.. You can send an google maps link attached with the lattitude and longitude
Can we make it make it using Arduino nano and separate module for GSM and gps? If so how do I modify the code? Please help, it for education purpose
If I have a 4G module paired with ESP32, how can I share the 4G internet using ESP32 hotspot? So I can also have a Wi-Fi hotspot on my motorcycle with a working internet connection and it's not only a web server without internet connection.
what is the duration of the battery? . is it necessary to work with sleep modes?.
regards
how can you change the contact number in your device using bylnk?
In emergency times, it is very difficult to long press for contact other people..... It should be design to make call and msg without being a long button press on project board...
Sms is good feature, but you can make another blynk virtual pin and give it value either 0 or 1, and make an app that has maps or gps navigation software implemented, so when value on that v pin is 1 which means it's emergency, the app could send the notification and when you open it navigation is already started without you having to find the maps and then type the coordinates. I'm overthinking this simple invention, probably sms with ready coordinates to copy and paste is enough 😅
Awesome video, It Really informative and interesting. Yeah, the emergency features are really helpful.
You only used NODEMCU and GPRS right?
Perfect project and i am waiting for next video which is built an phone..,..
Can we connect a gsm module (Sim800l separately) to normal esp32 and upload same code? It can work? If no, how can we do it ?
very nice, you should make your own phone project
The simcard needs to have internet data available all time for this to work or no data needed?
Yes it requires a data pack
What’s the name of the gsm module you used? I am working on a similar project…
How to make such project with node mcu, sim800l , and gps module
Nice content .. was wondering if some additional commands could be added like grounding some pins to trigger some relays
Or even respond to commands sent by sms and through the Internet
I get an error like exec: "cmd": executable file not found in% PATH%. Can you help me fix it?
What about if i Select the board nodemcu 0.9 Is It works? What other library works on this ttgo tcall board ?
Can we track multiple devices simultaneously on one screen???? How???
nice video everything explained well. thanks for helping me out
can we connect load cell sensor to ttg tcall ?
I have been just getting started with the board ttgo lilygo. When power up for the first time the led on the board were flashing as I Have uploaded blank sketch after that I'm not getting any response to any of code which is uploaded. Not even serial monitor prints any msg or led flashes.
Any troubleshooting suggestions will be appreciated.
Thanks
do you solved it? i got the same issue! :(((
@@sanerozak3134 yes, i got the problem solved. get latest software version of Arduino IDE and try.
BRO!! the 10k ohm resistor which you have used is of .25 watt or .50 watt???
please help me, can you add a Fingerprint to the esp32sim800l module to turn on the motorbike, so I want to make security on my motorbike using a fingerprint and Gps tracker.