DIY NP231 How to Rebuild Part 1
ฝัง
- เผยแพร่เมื่อ 27 พ.ค. 2019
- Get a NP231 Rebuild kit here amzn.to/2MqY999
In Canada get the Rebuild kit here amzn.to/2K704wv
This is part one of how to rebuild a NP231 transfer case. if you've been wanting to rebuild your np231 transfer case then this video is for you. This DIY NP231 rebuild video goes in depth to cover everything, every detail on rebuilding this transfer case. Most people get scared to this but it's not that bad at all - ยานยนต์และพาหนะ
Thank you for showing how the transfer case is disassembled and assembled. Right now I'm checking the transfer case of my s10 Blazer 91. Greetings from Mexico City.
I will probably never do a project like this - But I enjoy this series you've put together. Excellent Quality Video's - I like all the different camera angles. Will be great reference video(s) for the Jeep community for many many years.
I try to cover everything so the viewer can see and relate without second guessing
Enjoyed the video very much. You take your time and explain everything with great detail. Well done, thank you !
Thanks Jerry ! Another useful video. a Big help on my 1997 Jeep TJ.
Learned a ton of stuff from you
Good teacher
Very impressive video!
Very entertaining! and fun! love your videos.
This was so interesting!
i love your video i followed along rebuilding my sons and i love the comment using common sence lol great video
Good video, I'm just replacing my input and output seals but wasn't sure if there was supposed to be gasket or RTV between seal cover and the case, it appeared that it had an RTV seal, but there was barely anything there and I wasn't sure if there was supposed to be, now I know, thanks.
VERY NICE THANK YOU AGAIN
Parabéns pelo vídeo!
Me ajudou muito aqui no Brasil ! 👍
Thanks to this video I found out what the mystery pieces in my tcase are lol part of my planetary haha
Your planetary came apart ?
@@TestDontguess the thrust washer broke
If I were to use a np321C for my jeep, could I replace the np231c input and front case housing for the np231j? Essential making the np231c fit a jeep 6 bolt round pattern with 23spline input?
Beautiful work you doing that's the bottom of the transfer case doesn't that have a for the oil to go the other way greater less you are to me cuz I see you put it on the wrong way I don't know
What's the difference between the np231 and np233 I have a different front flange on my tcase then the one in your video but everything else looks the same
Whats the name or part # for the snap ring at 9:45 ? I lost mine somehow and im trying to locate on locally, hopefully
What year is the chevy 231c? What years work?
You really don't need a blind hole puller to get the bearing out of the input shaft. you can drive it out from the other side if you don't have a puller. I know it is necessary to get the bearing out of the rear case half. Just an fyi for the flat rater's out there.
I’ve heard you can heat it up and tap the case and the bearing will fall out but I have not tested that theory
@@TestDontguess I imagine you could do it that way. The bearing isn't very tight. I just used one of my small slide hammers and it popped right out. Took less than a minute.
What makes "Assembly Grease" any different then regular grease??
Assembly grease is designed for rebuilding motors as the film of grease has high anti seize properties to prevent scoring at first start up before proper oil lubrication can be achieved
The biggest difference is that it will turn into a liquid (dissolves) easily when heated and won't clog filters.
The number one thing i learned watching this video, is to use common sense.
Not your first rodeo I see.
hi BSK garage i injoy all you're videos no I wouldn't lose interest if you did the hole rebuild In one video I mean like the hole rebuild on like broke down unit's like the hole transfer case the another video for something else i Iike learning I my self am only a self taught grease monkey getting back in car's at 60 such as life wen't i wonder one do you have Handel I can call you by when i text you in stead of calling you BSK garage well good night 🌇🌆⛼🌃 oh and you can call me Cole C😎😎L