2005 Toyota Tacoma blend door actuator video 1
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Blend door replacement on Toyota Tacoma / recirculate servo / doorman part number 604-109 symptoms would be a clicking noise underneath your passenger dashboard while air conditioner is on recirculate.
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
Just wanted to take a second to say thanks for this… started doing this to me yesterday. Thanks for all the information and tools necessary. Really helped me out a bunch and saved a load of time… you’re the man
You’re welcome. I’m glad it helped you out.
Thanks a lot for sharing knowledge, just did this on my 2007 Tacoma, did it with a 7/32 socket with an extensor, handle is not needed as you can turn the screw with one hand tight holding the extensor, working like a charm now that the heat is on. right on time. Thanks again!
You're welcome.
Yeah man it's exactly the same on the third gen a few more steps to remove the glove box and airbag but exactly the same behind it got it replaced in 15 minutes and the noise is gone. Toyota dealer told me what it was and wanted $800 plus actuator to fix it that's when I decided to go on TH-cam and saw your videos thanks again.
You’re welcome. I’m glad it helped.
I just did this repair to my brother's 09 Tacoma. Your directions were great and I couldn't have done this without your video. Thank you very much for helping!
You're Welcome.
Awesome video . Thanks man, a little irritating getting that back bolt off with a 5.5 mm wrench and no room to do so lol . But all in all easy fix , save your money and do a fun little autobproject . Thanks again .
This video worked for me I fixed the problem for $30 and a little sweat! I wish I could thank this guy I would buy the bar for him. An auto shop might have charged me $300 or god only knows? If you have this problem you will do anything to stop the repetitive noise. You can't drive safely. He is correct a 7/32 standard works as well as the 5.5mm. I needed a 7/32 deep socket as short 5.5mm couldn't handle the top screw.
You're welcome. Thank for the nice comment. :)
Got the part but didn't know how to get at it and where it was located. Glad your video showed me how to go about it. Thanks!
You’re welcome.
@@Speedracer-jh9hf Just got the new part in thanks to the vid; and no more noise.
I got a 2017 third gen doing the same thing am going to check it out its probably very similar it's been driving nuts for a few months now thank you for the video
You’re welcome.
Thank you for putting this video out. Solid how to 👍👍
You’re welcome
question, is yours still working? I replaced mine twice with the doorman after market and it keeps going out every 2k miles. Wonder if I need to go OEM@@Speedracer-jh9hf
@@stevenmederos I sold that Tacoma about seven years ago. If I remember correctly, it worked the entire time I had it after I changed it, which was a year. I have had two new Tacoma’s since then, and have not had an issue with either of them. I would recommend buying the factory part being that it’s such a pain in the butt to change.
Thanks for making this! My 2010 does same thing
You're welcome!
Hey Bro
Thank you so much for posting this video. my 2005 Toyota Tacoma is doing the very same thing and I did not know what part to change !! And the noise was so annoying !!
Awesome video thank you for taking the time and making the video, really helped out a lot of us..
Peace
God Bless
You’re welcome.
Hey man, thanks for making this video, its a huge help. My 07 is clicking like this when the temp selector is in the full hot position, but it stops in any other position and heat works fine. I will go get this part now. Appreciate it.
You’re welcome.
I have the same issue with my taco…thanks for posting causes it really helped!!
Good to hear!
You sir, are a FUCKING LEGEND. Thank you so much for this video!
You’re welcome.
This might be related to my taco’s not closing the air vent flap. The problem is even if I put the circulation inside I can still smell skunk stink inside.
Try changing your cabin air filter. The blend door actuator usually makes a clicking noise if its not working. (From what I've seen anyways.)
Helped out a lot! Thanks!
Triumph TR6 you’re welcome.
Thanks
You're welcome.
This is misleading video.
To be precise this is the recirculation actuator. There is a second actuator for the blend door. The blend door mixes the heat and cool air set by the temperature knob.
The blend door actuator is a 4 pin connector and twice as much as the recirculating actuator.
Mines the same but when the circulation button is off is off it clicks
I think it would still be the same problem. The actuator only moves the flap that redirects airflow. I'd give iy a try.
My 05 Tacoma doesn’t make a clicking sound, but it blends the cold air with the hot air. Do you think it’s still the blend actuator that I need to replace?
As far as I know the blend door, only separates recirculate air from pass-through air. It is a little flap that allows the air to re-circulate or pass straight through fresh. I don’t think it would have something to do with hot or cold, but I am not an auto mechanic. I am a mechanic, but for small engines on jet skis, lawnmowers, motorcycles, etc. I would ask an auto mechanic. If so, I would just do it yourself. It’s really not that hard.
Hey, I am so glad I found this. I am a ton of money into a fix and it still is making this noise. Interesting that mine clicks when in defrost and not on recirc. Only goes off when I take it out of defrost and hit the recirc. How long did it take to swap out the part? Cheers!
About 15 - 20 mins but I've been a mechanic my whole life. I'd say 30 mins would be realistic for most people. Good luck!
Can you show video that shows the range of motion the linkage to actuator actually travels when correct,mine clicked for weeks then stopped clicking,yet i see linkage moving and foam insulation covered door move and inch inand out when hitting recirculating button ..
I actually sold that truck about four or five years ago. Sorry I couldn’t help you out. The part is not very expensive I would recommend just changing it. If you’re somewhat mechanically inclined you could get it done in 30 minutes.
Mine does the same thing. Except the noise goes away when I turn on the circulation button. Might be the same part. Thx
Randy - did this part replacement fix your opposite problem? My problem is the same as you that the clicking is when circulation is on
@@brianland4490 yes it did.
@@brianland4490 hey I have the same problem, did you fix yours?
How did you remove the top screw? It's almost impossible to reach!
Like a boss
It was hard. I had to feel for it. You can't see it.
How is the dorman sensor holding up? Should I just go with OEM?
I have not owned that truck for about four years now. It did a hold up for the full year that I owned it with the sensor in it though. I think it’s just as good as any other sensor.
is that the part number on the box correct-Dorman 604 - 109? because when i look it up it saying its not a match? Thank you
It has been a while since I've owned that truck and made the video but I do remember going to O'reillys and buying that part then making the video. I had a 2005 Toyota Tacoma regular cab 4x4 4cylinder. So if you have the same truck it'll work for sure. That was the exact box it came in.
5.5 mm = SAE 7/32
7/32