Thank you so much for the video. I used a lot of it to clarify some things I wasn't sure from the service manual to rebuild my 14 BRZ. Thanks again man, really appreciate this
A very complete video, you did a great job. I fear you made it harder for yourself though. Could have installed almost all of the accessories on the engine before install. Also, why did you take the hood off? Just move it to the service position. It's much easier and you don't have to worry about lining up the hood on reinstall.
You skipped right over the part I wanted to see. The intake manifold adapters that attach to the block. One second they're not there and the next second they're already installed. It's between 22:42 and 22:46.
I just rebuilt my ‘14 forester N/A. Everything is done engine in car all wires and everything hooked up. Car cranks but no turn over. Came down to testing the ignition coils. No spark. Do you have a solution? Could it be the crankshaft sensor? (Which was never unplugged) im stumped. Anything helps.
clean and tidy with all the important build up details >>> awesome :-)
Вот пример нашим людям как надо саберать чисто и научно все молодцы , вот нам тоже так нужно учится делать 👍
Thank you so much for the video. I used a lot of it to clarify some things I wasn't sure from the service manual to rebuild my 14 BRZ.
Thanks again man, really appreciate this
Great footage! Exactly what I was looking for.
Thanks!
@@btdgaragewhere did you source the rebuild kit?
👍👍👍 высококласный специалист приятно смотреть! 👍👍👍
fantastic video, makes me want a Subi again!
Gracias por hacer este vídeo, me fue de gran ayuda, tengo un subaru impreza limited 2016 creo que es el mismo motor , gracias amigo.
Wow amazing work. Very well done and great video quality.
Nice video,is this procedure assembly for all boxer engines?
A very complete video, you did a great job. I fear you made it harder for yourself though. Could have installed almost all of the accessories on the engine before install. Also, why did you take the hood off? Just move it to the service position. It's much easier and you don't have to worry about lining up the hood on reinstall.
It was on excellent video thank you very very much
Thanks!
At 15:35 I forgot to install those o rings. Would i be fine if I put silicone rtv around them?
It’s best to install those rings. Rtv might leak over time due to heat
I love you man, thanks a lot
Great job.
Awesome video! Is this a some kind of rtv around plugs that are next to springs valves ? And what it for? Thank you
When i remove the heads it had silicone on the head gasket gap by the front cover it came from oem but didn’t see u did it ? 16 wrx
You skipped right over the part I wanted to see. The intake manifold adapters that attach to the block. One second they're not there and the next second they're already installed. It's between 22:42 and 22:46.
GRATE JOB CONGRADULATION.
Very good 🎉❤
What where the specs on the shims you put in for the valves?
👍👍👍
Are these torque specs the same for a 2015 wrx engine rebuild having a hard time finding all specs
At 18:06 what are you using to put this on I'm stuck trying to get it off
What do i do if i font know were my chims were sitting?😅
Do you lube the bottom of the mean bearings? Or just the surface where the crank sits?
Put a thin layer of lube on it :)
I just rebuilt my ‘14 forester N/A. Everything is done engine in car all wires and everything hooked up. Car cranks but no turn over. Came down to testing the ignition coils. No spark. Do you have a solution? Could it be the crankshaft sensor? (Which was never unplugged) im stumped. Anything helps.
No spark in any ignition coils so i know its not one faulty coil.
Did you manage to find the no spark cause?
Started right up duder...
Greetings!
Can a use the same timing set for a fa20 non turbo from a 2013 frs?
Hi! I think it’s the same.
And here I thought the head gasket sequence was confusing!
HOW BAOUT THE FB25
Is it possible to swap an XT forester engine into an outback BS ???
26:23 what is this ? how to call it ?
What piston ring brand you use? And was the pistons new or used?
Hi, new rings from subaru
I can use the same torque for a non turbo frs?
Yes brother
@@btdgarage thank you bro
Is there a pdf manual you went off that I can find for the rebuild?
Wow
Thanks
filter ocv 4 ea
Muy complicado ese motor
assy
video bad.. profesional to the max.. u should be working in a automotive school .. 👍
You didn’t show the position the pistons go that’s where I’m stuck haha