D16 Turbo Hit the Dyno !
ฝัง
- เผยแพร่เมื่อ 4 ก.ย. 2024
- #d16 #d16turbo #dseries #singlecam #sohc #d16z6 #honda
if your New to the channel Subscribe !
hit that like and leave your comment below !
follow us on Facebook : 🔵 www.facebook.c...
Tik Tok : ⚫️ www.tiktok.com...
www.maxpeeding...
Make sure you check out Constantuned for Performance parts & Tuning
⚪️www.constantun...
Miah is the man! I’ll be bringing mine down to them when it’s time!!
Happy Father’s Day btw big homie?
Oh shit I didn’t know the cut all the trees down by his place. It’s been a minute 😂 freakin Ron’s even up there 😂
@@carpartsduckfarts2089 happy fathers day man! shes ripping has been ripping but we got numbers , i wish he could worked with my tuner but it is what it is
@@underestimatedgarage wdym worked with your tuner?
@@whatta7793 what do you mean?
Made good power!! Needs e85! Keep pushing!
yeah wish we had e85 out here !
@@underestimatedgarage I heard theres a shell station in marysville corner with e85 lolol
@@brokenboosted1515 for reals ?!?
dope man hope to see you on the streets!
im sure ill take it out more next year where you at ?
🔥🔥🔥🔥
thanks 🤘🏼
Need to advance that cam a degree or 2 and it'll pick up more power in the top end
i think we need a different honda tuner lol
@@underestimatedgarage @manolitotech from Puerto Rico
@Minienthusiast are you talking about the tuner?
What size turbo
this one was a 58 trim
need a better tuner probably make more with someone who knows single cams lol dude thinks he tuning a b series or something 21 degrees is crazy on pump gas im assuming
@@theorylolz yeah ended up finding out i guess i could of done way more hp less degrees on timing an not stressing the engine so much
21• Timing?!??!!???
thats what the tuner said
Car on the incline, oil is affected.
you think so? so better tuning in a flat surface ?
@underestimatedgarage Yes, just like checking oil.
@@aragrox might have to retune when i have all the changes make sure its leveled right
Great! like that ! i do on my youtube chanel 295 HP and 377 tq with an D15Z6 at 18 psi ! CIVIC DAV4WS Slip-peut on dyno if you interesting . congratulation from France !
thank you! those good numbers as well
How much boost???
i ended up at 22lbs
@@underestimatedgarageat 21 degrees of timing ?
@lilrider100 i think its 19..
Stock internals?
Css block
speedfactory no notch long rods 75.5mm
vitara pistons,
delta cam 272-2 , vms cam gear
ferrea valves , ported y8 intake manifold,70 mm throttle body
-4an fuel lines, aem fuel rail, top mount turbo, hondata s300 🤘🏼
@@underestimatedgarage That should make more than 280hp lol
@@xinx-fn8973 on pump? i know on E or racegas it will
@@underestimatedgarageI got d16 built no notch speedfactory rods 75mm vitara 70mm throttle body stock valve stock cam brain crower spring and retainers same turbo setup as yall pump gas made 305 on 18 lbs
@@diegorodrigues3854 all depends as well the tuner and how hot it is that day we tuned it was 98 degrees outside
plus car was getting warm so we hard to let it rest but i didnt want to go more because of fuel
No offense but your going about it wrong 21° of timing an talking about adding more ..its not an all motor car you should use the turbo to make power if not whats the point of having it on the car
your not the only person told me that but i let the tuner do it, im not a tuner or know much about it but i hope i get the hang of it more on my other build thats im going to have
If you add race fuel like he was suggesting you will need to add more timing because the fuel burns slower. But at the same time there is a fine line you have to ride when boosting because the more boost you add you'll have to pull some advance out of the timing.
@@JCMODS6969 I've had the opportunity to tune a lot of Vitara builds an on regular gas ethanol an. C16 an have made 400-700 HP an few of those set ups. 95% percent of the 450+ HP Vitara or Hondas I tune on ethanol don't ask for more the 12 13 of timing an make power an burn the fuel great
@curlyflores1344 I follow a youtuber and ive seen also cars you have tuned if im correct your off Arizona area and i know your a great tuner! also you guys have amazing cars 🔥 wish some tuners out here close by where as helpful as you guys are from what ive seen
@@curlyflores1344what rods and pistons was making 700hp? Stock sleeve