How to BEND a 4 Point Saddle - (ft. The Hoppy Bender)
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- Get the Hoppy Bender HERE: bit.ly/3tGo8iE
Easiest, fastest, and most accurate Pipe Bender
The Hoppy Bender is hands down the most innovative and smartest pipe bender on the market. We have revolutionized the way electricians bend pipe - it has never been easier or faster than it is now with the Hoppy Bender. Even the most complicated bends are made As Easy As 1,2,3. Offsets, 3 & 4 point saddles, 90 degree bends always perfect and done in a fraction of the time!
A “Stop” attached to the Bender head is used to create exact and repeatable bends every time.
Simplified “Multipliers” engraved into the bender for placing the “Stop” prior to making offsets and four-point saddles.
Special 22.5 and 45 degree marks engraved into the bender for placement of conduit bend marks as well as standard degree marks for stop placement, used together for bending three-point saddles without reversing the conduit in the shoe.
Handy reference charts attached to the handle for locating bend marks.
𝙁𝙤𝙡𝙡𝙤𝙬 𝙍𝙖𝙘𝙠-𝘼-𝙏𝙞𝙚𝙧𝙨 𝙤𝙣:
𝙄𝙣𝙨𝙩𝙖𝙜𝙧𝙖𝙢: 𝙝𝙩𝙩𝙥𝙨://𝙬𝙬𝙬.𝙞𝙣𝙨𝙩𝙖𝙜𝙧𝙖𝙢.𝙘𝙤𝙢/𝙧𝙖𝙘𝙠𝙖𝙩𝙞𝙚𝙧𝙨𝙩𝙤𝙤𝙡𝙨/
𝙏𝙞𝙠𝙩𝙤𝙠: 𝙝𝙩𝙩𝙥𝙨://𝙬𝙬𝙬.𝙩𝙞𝙠𝙩𝙤𝙠.𝙘𝙤𝙢/@𝙧𝙖𝙘𝙠𝙖𝙩𝙞𝙚𝙧𝙨𝙩𝙤𝙤𝙡𝙨
𝙁𝙖𝙘𝙚𝙗𝙤𝙤𝙠: 𝙝𝙩𝙩𝙥𝙨://𝙬𝙬𝙬.𝙛𝙖𝙘𝙚𝙗𝙤𝙤𝙠.𝙘𝙤𝙢/𝙍𝙖𝙘𝙠𝘼𝙏𝙞𝙚𝙧𝙨
𝙐𝙎 𝙎𝙄𝙏𝙀: 𝙝𝙩𝙩𝙥𝙨://𝙧𝙖𝙘𝙠-𝙖-𝙩𝙞𝙚𝙧𝙨.𝙘𝙤𝙢/
𝘾𝘼𝙉𝘼𝘿𝘼 𝙎𝙄𝙏𝙀: 𝙝𝙩𝙩𝙥𝙨://𝙧𝙖𝙘𝙠-𝙖-𝙩𝙞𝙚𝙧𝙨.𝙘𝙖/
When are you guys making a 1 inch bender
Is shrinkage the same as a normal hand bender?
Nice idea, but I’m skeptical. He says three inch rise, but the camera shot angle does not show this very well at all. Almost like you guys are doing it on purpose because it didn’t come out to a perfect 3 inch rise.
Nice⚡Any plans for a 1" Bender?
not at the moment!
Very good , thanks for the vídeo