How To Bend A Box Offset On EMT

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 322

  • @metaninja
    @metaninja 5 หลายเดือนก่อน +4

    If only there were more of you in the field and in the class room. This felt like a cool uncle, sharing the trade with his nephew. It is obvious that you enjoy the trade, and that's what makes your videos fun to watch. Thank you!

    • @MountaineerOutdoors
      @MountaineerOutdoors  5 หลายเดือนก่อน +2

      I totally appreciate this comment. Funny thing is, I'm actually gonna become an electrical instructor this upcoming year. Thank you for your kind words. I appreciate your comment and watching ☺

    • @DanielFoster-r7e
      @DanielFoster-r7e 14 วันที่ผ่านมา +1

      So , that was 2 bends at 10 degrees

  • @lespaul36
    @lespaul36 5 หลายเดือนก่อน +2

    I became an apprentice many years ago to help out a friend who was a journeyman. Let's just say, he lost his license to drive and I needed a better job. First bending I learned was box offset and he was a dude that had being doing it for decades and hardly measured and it came out right. He taught to get a feel for the pressure so I knew when I was about the right degree and to imagine certain lengths. Like you I practiced on scrap. In no time I was bending offsets with no measurement or really checking the angle, but the were good bends. Wish I had the opportunity to learn more complicated bends from him as he was just instinctive on his bends and life happened.

    • @MountaineerOutdoors
      @MountaineerOutdoors  5 หลายเดือนก่อน

      I know exactly what you mean. I wish I could have picked his brain more had I known what I know now. Thanks for the comment and watching ☺

  • @stephenb5757
    @stephenb5757 3 ปีที่แล้ว +6

    Fingertip measurement for offsets is awesome where has that been all my life , that’s $1 million tip 🙏 thanks!!!!!

  • @monruizo3896
    @monruizo3896 3 ปีที่แล้ว +13

    I've been bending for a week and this tutorial helps me a lot esp with the offset and measurements

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว +1

      Awesome I am glad that this helps you. I will be doing more videos in the upcoming months.

  • @trevorrhoades4489
    @trevorrhoades4489 2 ปีที่แล้ว +1

    I like hearing old dogs stories. I'm a year in, and im completely invested in the trade and work

  • @stevenle1760
    @stevenle1760 2 ปีที่แล้ว +3

    Conduit bending is like an art. Glad you teaching it.

    • @MountaineerOutdoors
      @MountaineerOutdoors  2 ปีที่แล้ว

      Well I appreciate it alot thanks for the comment and watching ☺

    • @kleptogiver
      @kleptogiver 6 หลายเดือนก่อน +1

      was thinking it could be a competitive sport, but def an art...

    • @MountaineerOutdoors
      @MountaineerOutdoors  6 หลายเดือนก่อน

      Agreed

  • @goldberg321654
    @goldberg321654 4 ปีที่แล้ว +34

    Just starting to learn to bend , I like the fact that you teach it in a way that anyone with a different skill level can understand. Keep up the good work!

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว +3

      Thanks man I appreciate you watching and commenting. I should have some more Up real soon

    • @cioch84
      @cioch84 4 ปีที่แล้ว

      Yes. Completely agree!!!

    • @davidalcantar6401
      @davidalcantar6401 ปีที่แล้ว +1

      Thanks for the well explained lesson.

    • @MountaineerOutdoors
      @MountaineerOutdoors  ปีที่แล้ว

      My pleasure thanks for watching ☺

  • @gr8white12_6
    @gr8white12_6 2 ปีที่แล้ว +1

    Very easy explanation, I’m going back to running conduit after 2 years and watching these videos is refreshing! Thank you!!

    • @MountaineerOutdoors
      @MountaineerOutdoors  2 ปีที่แล้ว

      Awesome good luck and I appreciate you watching and commenting ☺

  • @chuckholsclaw6829
    @chuckholsclaw6829 3 ปีที่แล้ว +3

    Your bending are very useful and helpful to me. I am an hvac installer here in Southern California. I install my own electrical circuits and sometimes I have to use conduit and make bends with a bender and I'm not the best at it for sure. This will help me improve.
    Thanks.
    Chuck

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว

      That's awesome and I appreciate your comment and watching ☺

  • @brenttlewis3370
    @brenttlewis3370 4 ปีที่แล้ว +3

    I’m an LEA and have never really had to bend pipe too often. Now it sounds like I’m going to need to learn so I appreciate your videos for they’re super easy to follow. I’m going to study the Cosan chart.

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว +1

      Awesome... I have been making alot of electrical videos lately... One question what is a lea?

    • @brenttlewis3370
      @brenttlewis3370 4 ปีที่แล้ว +1

      @@MountaineerOutdoors it’s a Limited energy “A” license. Also there’s LEB which the B license isn’t allowed to install pipe or work with Fire Alarm systems or Nurse Call systems. It’s all low voltage. Data, security, fire, nurse call, cameras etc.

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว +1

      Gotcha not sure where your from but in Virginia you don't need that kinda license.. That's why I asked you what it meant. I hold a journey man card and where I work that's all they require along with 4 year apprentice program.

    • @brenttlewis3370
      @brenttlewis3370 4 ปีที่แล้ว +1

      @@MountaineerOutdoors right on. Oregon requires you to at least hold an LEB to pull cat cable. But yea a Journeyman electrician can do it all! I did 6000 hours and 3 years of school to get my LEA. LEB only takes 2 years.

  • @ericking8578
    @ericking8578 4 ปีที่แล้ว +2

    I’m a apprentice. I’ve been in the field for 6 months. I appreciated ur story’s n teachings brother. Keepin coming‼️

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      Definitely will I have alot in the works thanks for watching and commenting ☺

  • @ManlyBurp
    @ManlyBurp 5 หลายเดือนก่อน +2

    I just started learning how to install access control and this will help me move ahead more quickly. Thank you for sharing this information! Excuse me now while I go hit that subscribe button.

    • @MountaineerOutdoors
      @MountaineerOutdoors  5 หลายเดือนก่อน

      Awesome and welcome to the family. I appreciate your comment and watching and subscription. Have a great day

  • @WelshRabbit
    @WelshRabbit 3 ปีที่แล้ว +3

    At 4:02, "$1000 words" are what English linguists like to call "sesquipedalian" -- from the Latin (sesqui -- 1-1/2 + ped -- foot) meaning "foot-and-a-half long words." Any word which is a foot-and-a-half is pretty long in anybody's book. Use "sesquipedalian" to impress and amaze your friends and neighbors next time someone uses unnecessarily big words to convey a simple thought when a little word would do. Say "ses+qui pe+DAY+lee+an" 3 times and the word is yours forever.

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว +2

      That word though. I don't think I have ever heard of it until now.

  • @smvideonow
    @smvideonow 4 ปีที่แล้ว +2

    I like your energy and philosophy of teaching. Keep it simple stupid, don’t give me your big words. I’ve always felt that people who can’t say something in simple terms either doesn’t know it or doesn’t want you to know it. Great tips. I’ll be practicing this week in my garage with scraps or maybe I’ll go buy some sticks.

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      Awesome keep practicing its the only way to get good.

  • @TheElectricalNut
    @TheElectricalNut ปีที่แล้ว +1

    I've been doing electrical work for 7 years, it's not the most common but I have had to bend emt in more than a few homes

  • @TrumpTrain911
    @TrumpTrain911 ปีที่แล้ว +1

    Awsome I’m learning pipe bending at my uncles low voltage company . This helped alot

  • @calebneiman3332
    @calebneiman3332 4 ปีที่แล้ว +3

    I work in property management and have an opportunity to run conduit for our parking deck. I am using your videos to learn! It’s going well so far loving the instructional videos.

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว +1

      That's awesome I'll be coming out with a few more soon keep an eye out for them

  • @deedolan399
    @deedolan399 12 วันที่ผ่านมา +1

    I greatly appreciate this video. Great instructor

    • @MountaineerOutdoors
      @MountaineerOutdoors  10 วันที่ผ่านมา

      Your most welcome and I appreciate the nice words. Merry Christmas 🎄

  • @googleevil9553
    @googleevil9553 9 หลายเดือนก่อน +8

    For math nerds, those multipliers are found under the "cosecant" table. Find your bend angle on the chart, then look under the cosecant tab.

    • @petermeilstrup9865
      @petermeilstrup9865 3 หลายเดือนก่อน +1

      And it’s pronounced co-seek-ant!

  • @robertfrate9738
    @robertfrate9738 2 ปีที่แล้ว +1

    Hi, you made it look effortless and simple ty, experience is the best teacher and you have the experience ty, Bob,

  • @MJCPeters
    @MJCPeters 8 หลายเดือนก่อน +1

    New bender, in a diy shed wiring project here. Thank you! I don’t need to become a pro but this will help me be instantly competent, without a tape measure, sharpie and trigonometry.😇

    • @MountaineerOutdoors
      @MountaineerOutdoors  8 หลายเดือนก่อน

      Awesome glad to hear that this helped you out. Good luck with your project. Thanks for watching and commenting ☺

  • @jessicaphinizee8294
    @jessicaphinizee8294 3 ปีที่แล้ว +1

    So glad I found your channel. Im learning more than when I was in class. You make things so simple.

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว

      That is great to hear and I appreciate you watching and commenting ☺.

  • @loganmaglietto5174
    @loganmaglietto5174 3 ปีที่แล้ว +4

    I’m just learning to bend conduit on roofs for solar, if you could post a video of an Offset(LB) to a 90 to another offset (Junction box) that would be very helpful!
    Videos are very helpful by the way. Thank you for posting them!

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว +1

      Good idea and I thank you for watching and commenting ☺

  • @Sjaubi-qf6wd
    @Sjaubi-qf6wd 2 ปีที่แล้ว +1

    How can I secure metallic conduit to a floor to put an outlet box on to it. So its loose 12/2 BX cable pulled through floor into metal conduit and through a connected metal 1 gang electrical box for an outlet . Also what size metal conduit for 12/2 BX cable? will 1/2 inch conduit be ok?

  • @sopoelectrician
    @sopoelectrician 2 หลายเดือนก่อน +1

    Wet erase pen works really well instead of sharpie. I prefer Blue so I can easily identify permanent from wet erase pen. Hope this helps.

    • @MountaineerOutdoors
      @MountaineerOutdoors  2 หลายเดือนก่อน

      Great advice thanks for sharing and watching

  • @Ron_C
    @Ron_C 4 ปีที่แล้ว +6

    Awesome! I love hearing about those tricks/tips...using your finger, etc. Good stuff Mike!

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว +2

      Thanks Ron...now when I have a side job I expecting you to help me run some conduit.

    • @Ron_C
      @Ron_C 4 ปีที่แล้ว

      @@MountaineerOutdoors Ha! Just have some extra conduit.

  • @adammontgomery7980
    @adammontgomery7980 9 หลายเดือนก่อน +1

    The sine of the angle gives you the vertical offset for each inch (or any unit) of length of the hypotenuse. In this case, sin(10 degrees) is roughly 1/6; so you just multiply your offset by 6 and make 2 marks that far apart. Electricians use 30 degrees a lot because sin(30 degrees) = 0.5 so you can just use a multiplier of 2.

  • @johntrauger68
    @johntrauger68 ปีที่แล้ว +1

    Question:
    What is the "shrink" for the 10 degree bend?

    • @MountaineerOutdoors
      @MountaineerOutdoors  ปีที่แล้ว +1

      Honestly it's not that much. I am working on shrinkage video hopefully by the end of the summer. Stay tuned

    • @johntrauger68
      @johntrauger68 ปีที่แล้ว

      @@MountaineerOutdoors
      I found a video that shows it to be 1/16"/inch.
      Indeed, that is not much when bending box offsets.
      Your video helped me show how to do the box offset to students that have access to a "Little Kicker" bender one of those companies makes. So naturally they take the easy way, thinking every employer will spring for those at around $350 apiece I assume.
      Thanks again!

  • @Hipit55
    @Hipit55 3 ปีที่แล้ว +1

    Thanks for the video,I would appreciate it if you could show a clear close up of the bottom of the pipe and how it must line up with the angle line on the Bender

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว

      I will definitely keep that in mind when doing newer videos. Thanks for the comment and watching ☺

  • @1119-w3u
    @1119-w3u 3 ปีที่แล้ว +3

    Wow this is amazing. Thank you so much. I got me a first job to do next week and I can't wait, but it already involves conduit bending, because it is a failed inspection job, and I got to redo the wiring in conduit. 😃

  • @chananyaschiff206
    @chananyaschiff206 ปีที่แล้ว

    This video was supper helpful, and can you please make a video on the chart on how to do all bends with the multiplier chart.

  • @gerrymcintosh4477
    @gerrymcintosh4477 4 ปีที่แล้ว +1

    I’m about to bend conduit in my shop, and really appreciate your videos. Cheers from Canada.

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว +1

      Awesome, hope it turned out awesome. so how did it go????

    • @gerrymcintosh4477
      @gerrymcintosh4477 4 ปีที่แล้ว +1

      @@MountaineerOutdoors thanks to your videos and the Sparky Channel things turned out very well. I really enjoyed using my Klein bender and happy to report my shop has several new outlets, an electric heater. Next, I will add a security camera and light to the outside of the shop. Thanks again for sharing your experience. God Bless.
      Gerry

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      That's awesome I appreciate it when I hear that my videos have helped. Thank you so much for watching and commenting ☺

  • @joegonzales8855
    @joegonzales8855 4 ปีที่แล้ว +3

    Can you do a video on 3-point Saddles with a push through method. When the conduit is too close to the box to bend a 3-point the regular way

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      I'm not sure exactly sure what you mean. If you can make me understand it I definitely will

  • @GBlaque
    @GBlaque 2 ปีที่แล้ว +1

    Any chance you could do a box offset with rigid steel? I guess it’s the same idea?

    • @MountaineerOutdoors
      @MountaineerOutdoors  2 ปีที่แล้ว

      It's definitely the exact same measurements However, I'm working on getting s Chicago bender so watch for it.

  • @james77011
    @james77011 ปีที่แล้ว +1

    Yes , please do a video showing how to use the formulas

  • @calvintucker3078
    @calvintucker3078 3 ปีที่แล้ว +1

    Love this guy just like me. no need for million dollar words.

  • @tolydukhovny682
    @tolydukhovny682 ปีที่แล้ว +1

    i am rewiring the warehouse aqnd i;ve bought the junction boxes , and when they came, i;ve found the ko's are staggered. i have to maqke the offsetsto keep the main emt length horizontal.
    p amsure there's a lifehhack for this situation.
    would you care to talk abot that?
    thanks.

  • @bahmannosratollah7017
    @bahmannosratollah7017 3 หลายเดือนก่อน +1

    Thank you so much for your hard work and great explanation

  • @jayinmi3706
    @jayinmi3706 3 ปีที่แล้ว +1

    C ould you just use some acetone to clean sharpie marks off of the conduit?

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว

      Yes you could alot of the times we just remark it and wipe it off.

  • @garrettjohnson1382
    @garrettjohnson1382 3 ปีที่แล้ว +2

    Thank you so much mike gonna start grabbing bunch of scrap pipe and doing some homework

  • @beansmalone1305
    @beansmalone1305 2 ปีที่แล้ว +1

    what is the minimim distance between bends that will fit in a 1/2 in and 3/4 bender without messing up the first bend while bending the second bend?

    • @MountaineerOutdoors
      @MountaineerOutdoors  2 ปีที่แล้ว

      Honestly not sure each bender is different so you would have to play around with it to see how close you can get. Use the finger method and you can't go wrong

  • @mikehaines5467
    @mikehaines5467 5 หลายเดือนก่อน

    can you help with this one -- I build commercial boilers and they are just a huge drum - 8ft+ diameters, we have to bend to the same radius of the boiler as well as laying boxes 3/8 offsets and managing to keep them conformed to the radius so they screw down flat. Some times they are 1-1/2" high box offsets - all prefab code boxes- but sometimes we have to drill out holes in other control boxes that may require a 4in high offset into a long 90 elbow -- This isn't too hard because we can bend by anchoring the 10ft conduit on a lifting lug welded to the top of the boiler-- we can use this to bend the full piece almost completely around it -- The problem we have is when we have to say go up 6 ft following the radius- then break to the left for 3 feet running across the boiler then having to kick back up 90 deg and then take remaining last ft to a 3/8 offset --- that makes it hard for us because we cant use the hard shell of the boiler and that lifting lug to bend the whole 10ft -- its awkward to use the hand bender to try and make all them changes etc... any advice - maybe you can experiment for me please --

  • @UnicornAdvisory
    @UnicornAdvisory ปีที่แล้ว +1

    Thanks bro. First day bending pipe today as a level 3. Lol

  • @luisamador1521
    @luisamador1521 3 ปีที่แล้ว +1

    Thanks for the videos straight to the point and very helpful 1 month apprentice.

  • @victormendoza6306
    @victormendoza6306 2 ปีที่แล้ว +1

    I would like to know like your do it I’m going to work on your way you show until get it

  • @pobrecpt1398
    @pobrecpt1398 3 ปีที่แล้ว +2

    When doing a box offset and making another bend say a 90° with it, how do you figure out how to bend it..and for it to come out the right direction that you want it to go.

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว +2

      I use a piece of scrap wire. I may have to do a video on it..

  • @michaelbraue240
    @michaelbraue240 3 ปีที่แล้ว +1

    Could you do parallel offsets and 90

  • @oscarmontes4066
    @oscarmontes4066 4 ปีที่แล้ว +1

    What size emt does the finger trick work for also thank for putting this information out there

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว +1

      I use it for all size up to one once. Gotta adjust it since the 1 inch is a bit bigger. But 1/2 & 3/4 no problem. Thanks for watching and commenting ☺

  • @matthansen736
    @matthansen736 4 ปีที่แล้ว +2

    I use the finger technique all the time. I teach it too my apprentice's as well

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      its the perfect gauge thanks for watching and commenting

  • @frankymoreno8935
    @frankymoreno8935 3 ปีที่แล้ว +1

    How would you do it on 3/4 pipe? Ive tried it with 10 degree and the math puts the 2 marks to close and it doesn't really work out.

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว +1

      So honestly I have not marked a piece of pipe for a box offset in years. For the 3/4 I use my finger technique so I can always have a reference. It doesn't take much for a box offset. Just make sure you keep your bends in check and roll they pipe 180° I know that isn't the answer you are looking for but I will try to work on it to get the math right.

    • @frankymoreno8935
      @frankymoreno8935 3 ปีที่แล้ว +1

      @@MountaineerOutdoors thank you.

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว +1

      My pleasure..

  • @adrianhernandez-lg2td
    @adrianhernandez-lg2td 4 ปีที่แล้ว +2

    Can you do how to do 2 offsets on opposite sides on a same emt

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      Excellent idea... I will Definitely work on it. Thanks for the video tip and watching.

  • @jrpritchard1622
    @jrpritchard1622 10 หลายเดือนก่อน +1

    THANKS FOR THE TIP I WILL BE USING IT FOR SURE ON BOX OFFSET BE SAFE

    • @MountaineerOutdoors
      @MountaineerOutdoors  10 หลายเดือนก่อน

      You as well thanks for watching and commenting ☺

  • @emilioescobedo3024
    @emilioescobedo3024 3 ปีที่แล้ว +1

    Thanks u make it so simple keep up the good teaching

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว

      I appreciate it alot thanks for the comment and watching ☺

  • @denvercharlebois699
    @denvercharlebois699 3 ปีที่แล้ว +1

    How do you make measurements based off of the ceiling. I work on a project at a university and never know how to measure things in respective of the junction box so my conduit runs straight in.

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว

      I am assuming you mean from ceiling to wall? Same exact way as from the floor. Or are you meaning running the conduit straight line?

  • @stanleyrowell5090
    @stanleyrowell5090 4 ปีที่แล้ว +1

    Is it possible for you to demonstrate a compound 90 degree bend.

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      Yes that's a great idea. I'll be starting back up the electrical videos very soon

  • @Markdoubts
    @Markdoubts ปีที่แล้ว +1

    Nice work, but I thought the multipler for 1/2 emt was 2?

    • @MountaineerOutdoors
      @MountaineerOutdoors  ปีที่แล้ว +1

      Do you mean on a 30 degree bend? Yes it is

    • @Markdoubts
      @Markdoubts ปีที่แล้ว +2

      @@MountaineerOutdoors Sorry-yes 30 degrees. He is using 6 in the video. Why? Thank you !

    • @MountaineerOutdoors
      @MountaineerOutdoors  ปีที่แล้ว +1

      So yes I do use the 30 degree in my bending when doing an offset. However this is a box offset so I used a 10 degree offset and for that the multiplier is 6. Does that make sense?

    • @Markdoubts
      @Markdoubts ปีที่แล้ว +1

      @@MountaineerOutdoors sure does. Thank you sir. God bless.

    • @MountaineerOutdoors
      @MountaineerOutdoors  ปีที่แล้ว

      Same to you.

  • @jamesellisjr3965
    @jamesellisjr3965 4 หลายเดือนก่อน +1

    Did you do a cosign video??

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 หลายเดือนก่อน

      th-cam.com/video/yz81Ya9kXek/w-d-xo.html. Sure did let you know what you think

  • @bahmannosratollah7017
    @bahmannosratollah7017 2 ปีที่แล้ว +1

    Thank you so much for sharing your knowledge.

  • @richarddiaz8248
    @richarddiaz8248 4 ปีที่แล้ว +3

    Thanks for your knowledge and experience

  • @Chapp2crazy
    @Chapp2crazy 3 ปีที่แล้ว +1

    What's the name of that Bending chart??

  • @richardhernandez6402
    @richardhernandez6402 3 ปีที่แล้ว +1

    Lotta help. Thank you for yur videos

  • @spikedavis4867
    @spikedavis4867 8 หลายเดือนก่อน

    Is that 3/8” to the centre of the hole?

  • @batfamilymember5350
    @batfamilymember5350 2 ปีที่แล้ว +1

    are all offsets bent in the air

    • @MountaineerOutdoors
      @MountaineerOutdoors  2 ปีที่แล้ว

      Most are yes but here is a video showing on the ground th-cam.com/video/N54mrmyM22w/w-d-xo.html

  • @timinwisco4921
    @timinwisco4921 4 ปีที่แล้ว +2

    Waiting on your chart....well maybe not the chart but the video on how to use it. I'm going across corrugated steel and need to get to about 1 3/8" then... you vids are great MAGA

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว +1

      Here is the video I did on it th-cam.com/video/yz81Ya9kXek/w-d-xo.html

    • @timinwisco4921
      @timinwisco4921 4 ปีที่แล้ว +1

      @@MountaineerOutdoors Thanks...looks like I missed when you posted it

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      Np hope that helps if not let me know and I will try to help you

    • @timinwisco4921
      @timinwisco4921 4 ปีที่แล้ว

      @@MountaineerOutdoors Yes, I appreciate the offer.... The offset I want it 1.125 (1 1/8") Do I still use the 10 degree? Would the mark be at 6.75 (plus the 3" from the end) making it 9.75 form the very end?

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      What size pipe?

  • @hardworker8048
    @hardworker8048 4 ปีที่แล้ว +1

    Thank you, Happy New year 2021

  • @edgarroque8578
    @edgarroque8578 4 ปีที่แล้ว +1

    Do you use the arrow for 90’s and offsets?

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      For the most part yes. I have a video telling you about the star on the bender and when to use it as well

  • @timhewitt9526
    @timhewitt9526 3 ปีที่แล้ว +1

    Can you do one on back to back 90s

  • @amac4194
    @amac4194 4 ปีที่แล้ว +1

    Do those same measure ments work. On 3/4

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว +1

      I'm gonna answer your questions honestly... I don't know however I think it should. I've been Bending so long without putting the marks that I'm not totally sure. That's something I will have to try myself. Now you have me thinking 🤫

  • @Josiahdunham
    @Josiahdunham หลายเดือนก่อน +1

    will this work for 1”?

    • @MountaineerOutdoors
      @MountaineerOutdoors  25 วันที่ผ่านมา

      Kinda might add more room for the bends since the shoe is bigger

  • @juliangallardo5307
    @juliangallardo5307 5 หลายเดือนก่อน +1

    First mark 3 inches and second mark 2 and a quarter 👍

  • @alfonsodavila5093
    @alfonsodavila5093 ปีที่แล้ว +1

    Need a four point saddle video thnx

    • @MountaineerOutdoors
      @MountaineerOutdoors  ปีที่แล้ว

      Ask and you shall receive th-cam.com/video/UT-3DBdV29Q/w-d-xo.html

  • @felipea1844
    @felipea1844 3 ปีที่แล้ว +1

    Please do a video of 2x box offsets (Height 3/8 or .375") with a "back to back" ( 2x 90*) at a distance of 72", and a height of 12". Thank you in advance.

  • @jhonnyrestrepo6780
    @jhonnyrestrepo6780 3 ปีที่แล้ว +1

    Thanks for sharing your knowledge man.

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว

      Always my pleasure. I appreciate you watching and commenting ☺

  • @bolongonasal3265
    @bolongonasal3265 4 ปีที่แล้ว +1

    Very interesting presentation. It looks kind of fun...

  • @WifEyesWideShut
    @WifEyesWideShut 3 ปีที่แล้ว +1

    Nice video man! I will definitely want to try that finger method. I seem to have not as much trouble trying to other bends like 90’s and some offsets, but box offsets kill me. I think it’s me not leaving enough space between the hump I made in the first bend. Anyhow, I’ll give your finger trick a shot! Thanks so much! I subbed!

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว +1

      I appreciate it.. Let me know how it works out for you. And welcome to the mountaineer outdoors family ☺

    • @WifEyesWideShut
      @WifEyesWideShut 3 ปีที่แล้ว +1

      @@MountaineerOutdoors finger trick works! And, the 3 inch starting measurement is a great place to start the offset! Thanks again! I’m looking forward to more of your videos!

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว

      That's awesome so glad to hear that this helped you. Starting in January there will be electrical videos every week for a few months. Looking forward to seeing you there. Have a happy Thanksgiving and happy holidays

  • @imageartifact
    @imageartifact 4 ปีที่แล้ว +1

    is there an easy way to replicate conduit bends? I'm trying to replicate a bed bow for a tent trailer,

  • @techmarte2826
    @techmarte2826 3 ปีที่แล้ว +1

    nice one sir i learned a lot thank you so much

  • @elitesoccerblogs4947
    @elitesoccerblogs4947 4 ปีที่แล้ว +1

    Thank you for making it so easy to understand!!

  • @kirknoble2234
    @kirknoble2234 4 ปีที่แล้ว +1

    When should you do a 45 bend just asking

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      Only when you are in a tight space. They are hard to pull through especially when your conduits are packed full.

  • @CuringDaHOOD
    @CuringDaHOOD 4 ปีที่แล้ว +2

    Can you do a video on 90's with a kick?

  • @johnjohns2333
    @johnjohns2333 2 ปีที่แล้ว

    Thank you very much! I’m starting out doing this stuff and was a very helpful video

  • @anthonycurtis4422
    @anthonycurtis4422 4 ปีที่แล้ว +1

    Do a video on the chart man! Ur helping me a shit ton

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      I will be working on it very soon. Glad to hear that I'm helping you.

    • @anthonycurtis4422
      @anthonycurtis4422 4 ปีที่แล้ว

      Mountaineer Outdoors I’m an apprentice in the making myself keep up the good videos !!!

  • @alberthicks9201
    @alberthicks9201 3 ปีที่แล้ว +1

    I always went 2" from the end of my pipe put my 1st mark then go 2 7/8 for second mark

  • @tonygorton1874
    @tonygorton1874 3 ปีที่แล้ว +1

    Thank you for the great content man!

  • @kincaid05
    @kincaid05 3 ปีที่แล้ว +1

    I needed that last part with the finger. I don't wanna do math for 5 min. I dont wanna mark the pipe. Just wanna know how much to bend it. That last finger-method could be a 30second standalone video. Thank you

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว

      Definitely I agree the finger method works every time

  • @adelcamac8681
    @adelcamac8681 3 ปีที่แล้ว +1

    Beau ti ful ! Thanks !
    Woouu this is Amazing .

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว

      I appreciate it thanks for watching and commenting ☺

  • @sohailjanjua123
    @sohailjanjua123 3 ปีที่แล้ว +1

    Hi , I like your video. Thanks

  • @michaelprosperity3420
    @michaelprosperity3420 3 ปีที่แล้ว +1

    Thanks. Great advice.

  • @mariochavez431
    @mariochavez431 3 ปีที่แล้ว +1

    Any chance you would give private lessons maybe a one on one I’ll pay you? I really need help I’m getting a new job and it’s more commercial I’m good in residential

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว +1

      Absolutely what kinda lessons are you needing

    • @mariochavez431
      @mariochavez431 3 ปีที่แล้ว +1

      @@MountaineerOutdoors I’m joining the union and they require knowing bending pipe. All my 5 years of being an electrician I’ve been a residential guy now I need to know how to do comercial. How can I contact u Sir?

    • @MountaineerOutdoors
      @MountaineerOutdoors  3 ปีที่แล้ว

      facebook.com/groups/mountaineeroutdoors/ join here on Facebook we talk there

  • @kleptogiver
    @kleptogiver 6 หลายเดือนก่อน +1

    cosine chart????

  • @vn1880
    @vn1880 4 ปีที่แล้ว +2

    Such a great video

  • @edwardduong254
    @edwardduong254 3 ปีที่แล้ว +1

    Video on preventing dog legged bends please

  • @leonardchristensen9309
    @leonardchristensen9309 4 ปีที่แล้ว +1

    thanks for the tips

  • @nasircooper9260
    @nasircooper9260 4 ปีที่แล้ว +1

    Hey do the detailed video on all bends plz

  • @virtual_fame8967
    @virtual_fame8967 4 ปีที่แล้ว +1

    Great video, this explained it well

  • @juniorrojas6938
    @juniorrojas6938 4 ปีที่แล้ว +1

    Very good Video. Inspiring

  • @edwardguevara3673
    @edwardguevara3673 4 ปีที่แล้ว +2

    Liked it a lot , thank you for being so relaxed about it. You are so right Journeymen can sometimes be real as------s. So thanks again. E

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว +2

      Yep just remember that when you are a journeyman try to teach and not be too hard on your apprentice. He's there to learn. Thanks for watching and commenting ☺

  • @DragnBarZ
    @DragnBarZ 4 ปีที่แล้ว +1

    Yes explain multipliers

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      Coming very soon, very soon... Keep an eye out... And thanks for watching and commenting

  • @brandonknight7240
    @brandonknight7240 ปีที่แล้ว +1

    Wht not mark the tip of the pipe face at 1 any point then 180° and line up on each so you dont get a dog leg and you dont have to guess

  • @timdouglass4934
    @timdouglass4934 4 ปีที่แล้ว +1

    I don't like big words either. New subscriber here.

    • @MountaineerOutdoors
      @MountaineerOutdoors  4 ปีที่แล้ว

      Welcome to the mountaineer outdoors family.. Thanks for your subscription and watching ☺