Can you help me with this issues I replaced my bulbs with led everything was ok until this morning I turned the map light on and didn’t work they on if I open doors the automatic lights but the one you push button doesn’t even the one on rear area can you advise me please
Alright bud, I back through my video history to track you back down to tell you this lol. So I don't have a fix, but I think that I've found a work around. I believe the the issue has something to do with the low power draw on the module. So a temporary fix for me has been to turn on one or both front map lights and the center dome light at the same time, they then all come on and after they seem to work normally for the duration of the drive. Hope it helps until we find a better solution. Let me know if it works for you.
I did this and when my motor isn’t running there right it when I turn car on and push them there really dim I have to use switch to make them bright but they stay on any solutions
@@notsofast2325 Thanks for getting back to me. I have turned the bulbs 180. Seems that they only work during hours of darkness. But they do work when needed, since I don't need them during daylight hours. Thanks for the real informative vid's you make. They are really good!
So when i did this. i did all the interior lights, and When i did the Sunvisor lights started flickering. after that they turned off and they dont turn on anymore. Neither do the back seat lights work. only the dome lights when opening the door and locking the car. What do you think is wrong? A Fuse?
Need to know what that little black thing is off to the side of the light noticed it was there when I put the sun visor down because it is slightly hidden by the sun visor what the hell is that little black thing it's like a switch that you can move back and forth and yet I don't know what it's for
When I put a led light in the left dome of my Denali, my dimmer stop working. My lights still work but I can turn them all on with my dimmer anyone know how to fix it?
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
Thanks to your videos I was able to upgrade all the lights on the Yukon outside and inside.
Glad I could help!
Can you help me with this issues I replaced my bulbs with led everything was ok until this morning I turned the map light on and didn’t work they on if I open doors the automatic lights but the one you push button doesn’t even the one on rear area can you advise me please
I have the exact same issue in mine. Just replaced them all as well.
Alright bud, I back through my video history to track you back down to tell you this lol.
So I don't have a fix, but I think that I've found a work around. I believe the the issue has something to do with the low power draw on the module.
So a temporary fix for me has been to turn on one or both front map lights and the center dome light at the same time, they then all come on and after they seem to work normally for the duration of the drive.
Hope it helps until we find a better solution. Let me know if it works for you.
you may have dirty contacts. Remove and check and clean the contacts. Good Luck!
I know it’s an old video but take the reflector out first and it’s easier to get the bulb out.
thanks for your input.
Piece of cake! Thanks.
no problem, thanks for stopping by.
Sound alike I need to buy a pick!
You can find them at harbor freight for about 3 bucks. Comes in a 4 pack . Each one is a little different in shape.
I did this and when my motor isn’t running there right it when I turn car on and push them there really dim I have to use switch to make them bright but they stay on any solutions
Replaced both bulbs but neither light worked. It was during a noontime event, with much light. Any Ideas? Thanks
Are all the other lights working? If so turn the bulbs 180. And Check to see if you are getting power to the socket. If no power check fuse.
@@notsofast2325 Thanks for getting back to me. I have turned the bulbs 180. Seems that they only work during hours of darkness. But they do work when needed, since I don't need them during daylight hours. Thanks for the real informative vid's you make. They are really good!
So when i did this. i did all the interior lights, and When i did the Sunvisor lights started flickering. after that they turned off and they dont turn on anymore. Neither do the back seat lights work. only the dome lights when opening the door and locking the car. What do you think is wrong? A Fuse?
maybe bad bulbs
Need to know what that little black thing is off to the side of the light noticed it was there when I put the sun visor down because it is slightly hidden by the sun visor what the hell is that little black thing it's like a switch that you can move back and forth and yet I don't know what it's for
Thank you
No problem, thanks fir stopping by.
Bulb numbers would've helped in an instructional video
thanks bro it was very helpful
your welcome,
How did you grab the bulb, I have small fingers and can’t get to it.
have a kid help you.
@@notsofast2325
Any recommendations on led headlights, I have 01 suburban
When I put a led light in the left dome of my Denali, my dimmer stop working. My lights still work but I can turn them all on with my dimmer anyone know how to fix it?
It's because most LED lights are not dimmable. Unless you bought dimmable LED bulbs, it's not gonna work.
Do you have a link to the LED bulbs you used?
here you go.
www.ebay.com/itm/233296874141
Just push in on the lens and twist, falls right out
thanks for your input.
Yeah there you go, the wonderful smell of WD40 as a new fresh air scent...
It goes away..Unless your sensitive
@@notsofast2325 you know it has fish oil in it, right?
@@spydrmngenius been doing this for years with no problem..