Chevy Tahoe Suburban GMC Yukon XL with Escalade Tail Lights Conversion How-To Install LED 2007-2014
ฝัง
- เผยแพร่เมื่อ 10 ก.ค. 2024
- amzn.to/49hEFbV Chevy Tahoe Suburban GMC Yukon XL with Escalade LED Tail Lights Cadillac 2007 2008 2009 2010 2011 2012 2013 & 2014. How-To Change Taillight Bulb Assembly on a 2007-2014 GMC Yukon & Chevy Tahoe Suburban! SLE, SLT and Denali XL. EASY Step by Step Escalade LED Taillight Replacement! I will show you how to remove the entire tail light assembly. Easy step by step installation and removal tips. Instructions also apply to other cars!
►Support the Channel & Purchase WorkingWithWimberley Mug!◄
www.workingwithwimberley.com
As an Amazon Associate I earn from qualifying purchases
Tail Light Assembly: amzn.to/49hEFbV
Headlight Assembly: amzn.to/2RHauXv
Grill (Upper): amzn.to/3ngUU1z
Grill (Lower): amzn.to/3n2NC1c
Craftsman Socket Set: amzn.to/37fwBZW
GoPro Hero 7 Black (What I Use to Record): amzn.to/2NCDCwf
► Subscribe: th-cam.com/users/WorkingWithWi...
► Website: www.workingwithwimberley.com
► Instagram: / workingwithwimberley
► Facebook: / workingwithwimberley
► Twitter: / wkwithwimberley
► TH-cam: / workingwithwimberley
STEPS:
1. Use a phillips screwdriver to remove three screws
2. Disconnect light wiring harness
3. Remove taillight
4. Remove fourth phillips screw
5. Remove trim panel
6. Install new light tail assembly
7. Connect the wiring harness
8. Install four phillips screws
TOOLS USED:
1. Phillips Screwdriver
This is a how-to video for the “Do-It-Yourselfer” working in the home, driveway or garage. No fancy or crazy expensive tools. I'll show you step by step how to get the job done!
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing*
Music by @tru_inferno: truinferno.bandcamp.com
Disclaimer:
Due to factors beyond the control of Steven Wimberley & WorkingWithWimberley, I cannot guarantee against improper use or unauthorized modifications of this information. Steven Wimberley & WorkingWithWimberley assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Steven Wimberley & WorkingWithWimberley recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Steven Wimberley & WorkingWithWimberley, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Steven Wimberley & WorkingWithWimberley.
0:00 Intro
0:52 Remove 3 Screws
1:00 Installation (Right)
1:25 Disconnect Connector
1:45 Remove Taillight
2:00 Remove 1 Screw
2:19 Remove Trim
3:15 Install New Taillight
3:44 Reinstall 4 Screws
4:08 Light Demonstration & Outro
Escalade Taillights LED for Chevy Tahoe Suburban GMC Yukon How-To Install Light Assembly 2007-2014 #WorkingWithWimberley Episode 50 - ยานยนต์และพาหนะ
Very simple and fast explanation
Thank you so much man . A new sub
Thank you! I appreciate the support. I will have more videos on the Yukon soon!
The coldest video ever. Ordering my lights at this moment. 💯💯💯💯💯
Thanks! I’m glad the video helped!
When you said God bless you all I automatically hit the thumbs up.
Thank you! I really appreciate that. And I meant it. God bless you! 🙌🏽🙏🏽
Great! Easy to understand and watch video. I really loved how you showed where the connection was under the vehicle and the tabs behind the side window. Great work. Subscribed!
Thanks! I definitely appreciate the subscription. I’m glad the video helped!
One of the best upgrades you can do for those suvs...with they had a set for the older models
Right, that’s what I had in mind.
They don't have any for a 04 Yukon?
It looks bad on the Tahoe but good on the Yukon’s and Escalades
0:05 seconds in "Oh he from the DMV" LMFAO good video my brother!
Thanks for the feedback & subscribe if you haven’t done so already! I try my best to give clear and simple instructions to help people save money and do these jobs themselves. This was one of the easiest jobs, but it makes a huge impact on the look of the SUV. Do you drive one of these GM SUVs? Are you going to do the tail light swap?
This was perfect. Thanks for the quick and simple step by step instructions. Appareciate you!
You’re welcome! I’m glad the video helped!
You made the installation real easy man thank you
Thanks for watching & be sure to subscribe if you haven’t already! You’re welcome and thanks for the positive feedback! I like to keep my videos detailed and straight to the point.
Man I was just driving home from work and Thinking about doing this to my suburban, got home and opened up TH-cam and this video was the fifth one. I think that’s my sign lol Thanks bro for the vid. Respect
Hey, no problem! I’m glad I could help!
Saw a co-worker the other day with a truck with that hack ..I was like "how was that possible!".... amazing thanks for sharing...
You’re welcome! It’s a pretty simple mod that makes a huge difference. 👍🏽👌🏽
Like how you touched the video up with more GO than SHOW and doing. Love bro
Thank you! I definitely try to keep all my videos straight to the point.
I love watching your videos and you have helped me do a lot of upgrades in my Escalada on my own. So simple and easy to understand even a woman can do it!!! Thanks so much and keep uploading new videos!!!
You’re welcome! I’m glad the videos are helping. That’s definitely my goal! There will certainly be more to come. Doesn’t matter who you are, man or woman, anyone can do these repairs! 👍🏽👍🏽👍🏽
I actually think those taillights looks a lot better on the 07-14 Escalades than they do on the newer body styles.
They do look cool! 😎
yo bro thanks for the video i get my 08 tahoe in a few days cant wait to update it
Thanks for the support! Be sure to subscribe if you haven’t already. The Tahoe is a great SUV. What mods do you have planned for it?
Very cool video. Simple replacement and completely changes the look of your SUV. Looks great!
Thanks! Much appreciated!
Game changer! Just paid mine off and I simply MUST do this mod.! Thanks mane!!
You’re welcome! I’m glad the video helped!
Video was very helpful. I have an 2010 Cadillac esv and I'm ordering my tail lights and i was gone pay someone to install my tail lights but thanks to your video ima do it my damn self.👍👍👍👍
Awesome! That’s exactly why I make these videos!
I hope they are easy to install because I just ordered a set for my 2010 Escalade! I am not mechanically inclined but it looks so easy, any advice on installing these things. I would appreciate any heads up!
Planning to do this on my 08 Escalade
Awesome!
You’re my best TH-cam mechanic!!
Thank you so much! That really means a lot to me!!!
i don't even have a tahoe, i was looking for videos for my '17 silverado great video fam
Thanks lol! Sometimes I watch repair videos on cars I don’t have too.
Don’t have a Tahoe or Yukon but those tail lights are sweet bro!
Thanks lol!!!
I just got a Yukon and I really want to do this conversion, too bad gas prices are eating up any extra money I would have for new lights
I see your fleetwood in the background , more videos on that ,,, 🙏
Luis Carlos Absolutely! Keep in mind any video on my channel that refers to the LT1 motor, or Impala SS is work done on the Fleetwood.
Perfect, I was looking at this product and happy to find your install video. Thanks for what you do.
You’re welcome! I’m glad the video helped!
That's pretty simple... I saw a Tahoe on Pinterest with the Cadillac taillights and thought it would be an expensive upgrade. After doing a basic search and seeing this video, I'm eager to get a set for myself! Thanks!
It’s a pretty simple installation. The aftermarket did a good job of making these a direct fit. Thanks for watching! I hope the job goes smoothly for you!
To bad this isn't available for a 92 1500 Blazer 🥴
Those lights set it off 👌
Overdose480 Thanks fam! It definitely makes a big difference.
Video was perfect. I should have mines by Friday and now i know how to install them
Thank you! I appreciate the compliment! This is definitely a job you can do yourself. 👍🏽
Wow simple and best how to video I've seen
Thanks! Much appreciated!
This was GREAT! Simple, quick, efficient, overall great upgrade I never knew it could be easily done on your own.
How well have the lights been working for you since you have had them?
Thanks for watching & subscribing! This install is very simple. I’ve had the lights for two years with no issues. I would recommend putting windshield sealant around the seam of the light to keep condensation out. I did that when I bought them and it’s worked great!
@@WorkingWithWimberley Solid!
Anyway you could send me a picture as to where exactly and how much to put on? I do not want to mess that up.
THANKS SO MUCH!
I’m working on a video right now where I install new fog lights on my Escalade. In that video I show how to apply the sealant. There’s really no trick to it. You just put it on and if you put too much on, just wipe off the excess. But the fog light video will actually show the process. That video will be out next Saturday.
@@WorkingWithWimberley SOLID! Much appreciated and respect!
I’m in DC of the DMV too, what’s a great shop you can recommend that I can get my taillights installed, brake calipers painted and emblems removed and painted ?
Unfortunately I don’t have a recommendation. I do all my work myself. I would ask coworkers, family and friends if they can recommend a local mechanic or shop who has done good work on their cars. The jobs that you want done aren’t that complicated so I think you’ll be ok.
I would never think to put those lights on a another truck but that was a awesome job sir. I just might put them on my suburban. The outcome was amazing 👍🏽👍🏽👍🏽
Thanks! It’s a simple job and it makes a big visual impact!
I saw ur Yukon in Niagra Falls the other day, I got a 2018 Cadillac Escalade ESV and u did a great job
Thanks for checking out the channel and subscribing! I really appreciate it! The 2018 Escalade is super nice. I just traded in my Yukon and bought a 2012 Escalade EXT. You can see it in my latest video. 👌🏽👍🏽
I see these on the road everywhere, they look good too
I agree. These lights look cool!
Now can you do one for the head lights and make the whole car look like the new body style 😂
I did one on a headlight assembly swap. I’m not sure if the aftermarket has made a newer Escalade style head light though: th-cam.com/video/D0M0NroqsaM/w-d-xo.html
Thx for making this video I am purchasing my Suburban next Friday and the lights immediately
You’re welcome! I’m glad the video helped!
Escalade Tail Lights Conversion - Very good vid. I love the gmc looks but wanted those "Lightsaber" taillights so much I thought I was going to have to buy an Escalade. Now I don't have to and now know how cheap and simple the switch is to do. Thanks.
You’re welcome! I’m glad the video helped!
Awesome hey notice your third brack light that goes all the way across. Where did you find that?
Thanks for watching & be sure to subscribe if you haven’t already! I bought the 3rd brake light off eBay. Just search “escalade style 3rd brake light” and you should see it.
@@WorkingWithWimberley hey man does it bolt directly on? thanks man
of all the vids you win best one out there that show the right diy way. thanks
Thank you! I try to make the videos the way I would want to watch them. Detailed and straightforward. I'm glad you found it helpful, and thank you for subscribing!
Bro this so damn easy. I asked around and shops wanted to charge almost 500 dollars. Talking about they have to do custom work. Thanks for this video brotha.
I think the 37 dislikes on the video are from 37 shops that have been getting over on people! 😂
This is next on my mod list!!! Nice truck man 👍 🔥
Thanks! It’s a really easy mod and it makes a big visual difference.
Easy, fast, and simple. Thanks homie.
You’re welcome! I’m glad the video helped!
I love that this was in my suggested. I have a 2011 Tahoe PPV (the police edition) and the wiring is just a bit more complicated but damn that's clean. Might get rid of my PPV and just get a regular 07-11 tahoe so I can clean it up like this.
Those lights are clean.. I just bought me an 07 Tahoe hopefully I can get this upgrade soon
Thanks! You should definitely be able to do this on an 07 Tahoe.
Made it very easy to understand and simple explanation.
Thanks! I’m glad the video helped!
Stumbled on this video and have a 09 Suburban that I wanted to so this to and didn't know if they would work . Man your truck looks good with the swap. Thx
Thanks for the feedback & subscribe if you haven’t done so already! I appreciate the compliment. I just wanted to show everyone how easy this swap is to do.
Great demo vid. Very well explained !!
Thanks for watching!
That was very simple and easy, nice job man.
Thanks. I’m glad the video helped!
Yeah that’s the easiest install I’ve ever seen that make a big change in the way my truck would look!! Thanks for posting
You’re welcome! Thanks for the support and for checking out the channel!!
@@WorkingWithWimberley I’m doing it now about to smash that subscribe!!!
@@rschris 🙏🏽
Thanks for that now I feel better about buying these tail lights
Ok cool. Good luck with the installation!
That's BADASSERY man! Thank you for the video!
You’re welcome! This is a job anyone can do to change the look of their SUV!
Really cool....Now to go looking for my 2014 Tahoe. Thanks to max
You’re welcome! I’m glad the video helped!
SO EASY. NICE JOB. THANK YOU.
You’re welcome! I’m glad the video helped!
This looks sick brother, just got an 08 Escalade excited to order my set of tail lights.
That’s awesome! Just make sure you order the ones for the Escalade and not the Tahoe/Yukon. I think they have different connectors.
Im so excited about tricking out my suburban!!! Thank you so much
You’re welcome! I’m glad the video helped!
Very informative! Great job short sweet and to the point! Thanks bro
Thanks for watching & be sure to subscribe if you haven't done so already! I appreciate the positive feedback. My goal is to be clear and direct in these videos!
That’s awesome!!! I’m definitely getting a pair for my 2012 Escalade! Thank you bro!!
You’re welcome! Make sure you get the lights made specifically for the Escalade and not the ones for the Tahoe/Yukon.
Looks good easy install. Nice wip.
Thanks!!!
Bruh!!!! That was clean transition! Thanks for the vid
You’re welcome! I’m glad the video helped!
Quick and easy install thank you for this video you just earned a subscriber !!!
You’re welcome! I’m glad the video helped!
Thank you brother for explaining that nice and simple 👍
You’re welcome! I’m glad the video helped!
mine came in and was done in about 30 min, the hardest part was unplugging the harness but it worked out fine all is well thanks for the information it made it a lot simpler and fast
You’re welcome! I’m glad the video helped!
Thanks for the tutorial. It was very helpful and clear.
Thanks for watching! This definitely a job you can do yourself!
Thank you For showing us this Simple Mod 2010 escalade gone be nice with this upgrade
You’re welcome! This is one of the most simple mods that makes the biggest appearance difference! 👍🏽👌🏽
Thanks for making that super simple!🙏🏾
You’re welcome! Thanks for checking out my channel! I always try to keep my videos quick and straight to the point.
Clean! surprised I don't see more tahoe's and burban's done like this. Wish they had this kit for my 04.
I definitely think it’s a cool look!
Looks good bro. Simple and great upgrade.
Thanks!
Thanks bro just got mine I’m gonna install right now.
You’re welcome! I’m glad the video helped!
Best vid. Very simple. You got my sub
Thank you! I appreciate every sub earned!!!!
Super Clean install 🔥 📛 🚒
Thanks!!!
Great video. If anyone has a lot of trouble disconnecting the underside tail light connectors, clean the dirt out of where you have to push down with a flat head screwdriver or a knife. Freed mine right up.
Thanks for the tip!
Holy crap! That is awesome man!
Thanks!
My next project thanx to this man
You’re welcome! I’m glad the video helped!
Great video. You made it simple and to the point
You’re welcome! I’m glad the video helped!
Very well put video my guy!
Thank you!
Thank you explained well and to the point!
You’re welcome! I’m glad the video helped!
Very helpful! Im thinking of getting these for my 2011 Escalade
They definitely make these for 2007-2014 Escalades. Installation should be pretty much the same.
Shout out to your camera person too! great job
Thank you! I was the camera person. I had the camera on a tripod for the still shots and I was holding the camera in my left hand for the moving shots. I've had a lot of compliments on the channel but you are the first person to ever compliment the camera work lol! Much appreciated!
Simple as that man 🧔🏻👍🏼..I have a Yukon 09 and thinking to put this on mine..great video!!
You’re welcome! I’m glad the video helped!
i seen this was confused but you explained GOOD video 👌
Thanks. I’m glad the video helped!
Oh man it’s On !!!! Awesome video thanks for sharing, I’m subscribing !!!
Thank you! I definitely appreciate the sub!
Good job man explained perfect. Thanks
You’re welcome! Thanks for watching.
Wow 😮 I’m bout to buy this now!! Thanks bro
Thanks for watching & be sure to subscribe if you haven’t already! It’s a really easy installation job. I’ve gotten a lot of compliments on the lights. I hope your job goes smoothly!!!
Perfectly done video. Even I can do it after watching this. Thanks
You’re welcome! I try my best to make these videos easy to understand!
@@WorkingWithWimberley yes, simple and to the point. I watched another guy do this same conversion on youtube yesterday and had no clue what the heck he was talking about lol
Lol! That’s why I make these videos. And if someone has already made one on the same job, I still make my video. I just want to get straight to the point and send you on your way! I use TH-cam to learn how to do things too, and it sucks when someone goes on and on about nothing and then they don’t even explain the job properly. I make sure not to do that! 👍🏽
Thanks Brother. That was an awesome tutorial
You’re welcome! I’m glad the video helped!
Great video. Nice upgrade.
Thank you! It definitely changes the look of those SUVs.
Damn bro sick video thanks was gonna buy a newer escalade but now will just save the money by 07 or newer n put those lights subscribing for sure!
You’re welcome! I’m glad the video helped!
Damn i never thought to do that. That is pretty easy thanks for the video
You’re welcome! I’m glad the video helped!
HI. VERY NICE AND SIMPLE INSTALLATION. NICE AND CLEAN CUT INSTALLATIONS WELL DUNE. THANK YOU SIR.😊
You're welcome! I'm glad the video helped!
Really good video bro thank you!
You’re welcome! I’m glad the video helped!
That was a Excellent video ! many thanks
You’re welcome! I’m glad the video helped!
Mind blown. Nice tip, may do this to my Tahoe
Ok cool!
Really appreciate your video easy
Thanks! I’m glad the video helped!
Thank you very much for the video, if i get a old escalade i will do this.
Ok cool!
Simple,fast,short really much than others great job man
Thank you! I try to make these videos quick and easy to understand!!! I appreciate your support!
Just bought ‘13 escalade, Gonna have to do this, great vid thx
You’re welcome! The process is pretty much the same, just make sure you purchase the lights for the Escalade and not for the Yukon, Tahoe or Suburban. I think the connector may be different for the Escalade.
WorkingWithWimberley alright will do thanks again
Great explanation!!! Keep yooo the good work homie
Thanks for watching bro! I appreciate the support! I’m doing new videos every Friday and Saturday!
Thanks for the video bro.. learn one more thing today..keep on Charing .God 🙏
You’re welcome! I’m glad the video helped! 🙏🏽
Ah man it looks so great!
Thank you! It definitely changes the look of the SUV!
I appreciate ya putting this up doing it on my 07
Might be a good idea to throw some dielectric grease on the connector before plugging back in.
Yes. That’s a good suggestion.
thanks, bro, I am waiting on mine to come so I can install them looks like I should be able to do this you make it look easy will let you know
Ok cool. It’s pretty easy to do.