I went through two sets of VLAND LED headlights and each one failed, on three of them, the low beam sealed bulb came out of the tiny clips and shined upwards, the fourth problem was the bottom half LED stopped working and all this in last two years. I just purchased OEM LED Chrome Headlights for $2,500.00 from Ford Dealer, purchased two LED Ballasts and Wiring harness from Black Flame for $550.00 I haven't forscan yet; all lights work, however, with the engine running and I turn the BRIGHTS on, high beam really flickers, low beam flickers some. With the engine off, no flickering at all with Low, High and Fog on, only if engine is running.
I had 2020 stock halos on my xlt, I just swapped them for 2020 leds and have everything wired up but can’t seem to find the forscan codes. Can you do a tutorial on that
I have same setup with black flames harness, install was fine but with using fuse 36 the lights will only work properly with accessories on. When the ignition is on the only thing that will work is the low beam. the drls (halo) wont light up with running lights setting and will not illuminate with low beam on and the high beam flickers. I have tried using different fuses and the only other result I had was they would function correctly except high beam would still flicker and the drls will not shut off even after truck is off. any suggestions?
@@gadriana97 yes. There was an issue with their harness which they have since resolved. I would also recommend triple checking that it’s connected to the right fuse.
Question. I have a 2015 f150 xlt 2.7 eco. to which i recently did a 2019 front end swap with oem led headlights. I did all the forscan reprogramming and everything seems to be working fine. The only issue is that my DRL’s don’t seem as bright as other trucks like lariat’s, platinum’s, limited’s, etc. I also didn’t plug in the fuses that came with the harness because regardless of where I’d plug it into, my DRL’s stayed on even when my truck was off, lights switched off, no key in ignition, and truck locked. Any suggestions on how to make my DRL’s brighter ? And where to plug in the fuse ? I know it has something to do with do with the fuse but i may wrong but I ran out of ideas on where to plug in to. Please and thanks
Hey I have these headlights aswell! So with my wiring harness it has two 15amp fuses in it. Do I just take both of those out and plug in the 10 amp fuse?
I have question about function on the DRL. Does it have a full power mode and a dim mode? It did not appear that the DRL dimmed when you turned on the low beams.
Tony - after you’ve got the OEM headlights installed, and before you do the forscan, how functional are the headlights? Just curious if I can do the forscan later, or if that would cause a problem with the ballasts.
I’m in Dallas looking to get this done to my truck. Waiting on the harness to arrive but ready once it’s here. What’s the shop address if you don’t mind. Thanks in advance
Hi I have 2020 lariat and it did not come with the led headlights. Do you have a location in San Antonio texas? Id like to get these headlights installed ASAP
Hi Steven. We do not have a location in San Antonio, however we’re located in Dallas and wouldn’t mind making the trip there. Give us a call or shoot us a text tomorrow to discuss details. 469-227-0573.
If memory serves correctly, driver side is DRL is grey with blue stripe and passenger side DRL is violet with white stripe. I would definitely double check though.
The easiest way is to remove the clips from the fender itself, and place them on the flare and clip them back in. Otherwise you’ll struggle all day trying to get them back on.
Tony is the GOAT, got my lights installed about a year ago and have been flawless so far
Thank you Daniel! 🙏
You changed the LED Headlights to Halogen Headlights and used a conversion kit which one was
I went through two sets of VLAND LED headlights and each one failed, on three of them, the low beam sealed bulb came out of the tiny clips and shined upwards, the fourth problem was the bottom half LED stopped working and all this in last two years.
I just purchased OEM LED Chrome Headlights for $2,500.00 from Ford Dealer, purchased two LED Ballasts and Wiring harness from Black Flame for $550.00
I haven't forscan yet; all lights work, however, with the engine running and I turn the BRIGHTS on, high beam really flickers, low beam flickers some.
With the engine off, no flickering at all with Low, High and Fog on, only if engine is running.
You need to Forscan to alleviate those issues.
I had 2020 stock halos on my xlt, I just swapped them for 2020 leds and have everything wired up but can’t seem to find the forscan codes. Can you do a tutorial on that
Sure can. Will work on it when we get back in town.
Jake have you found some? My led lights flicker
I have same setup with black flames harness, install was fine but with using fuse 36 the lights will only work properly with accessories on. When the ignition is on the only thing that will work is the low beam. the drls (halo) wont light up with running lights setting and will not illuminate with low beam on and the high beam flickers. I have tried using different fuses and the only other result I had was they would function correctly except high beam would still flicker and the drls will not shut off even after truck is off. any suggestions?
Give us a call at 954-643-3627. Once we figure out an exact solution, I’ll post here for others to view. My name is Tony.
@@hidexpresslighting5965 I am having the same situation. Did you figure out a solution for this?
@@gadriana97 yes. There was an issue with their harness which they have since resolved. I would also recommend triple checking that it’s connected to the right fuse.
Question. I have a 2015 f150 xlt 2.7 eco. to which i recently did a 2019 front end swap with oem led headlights. I did all the forscan reprogramming and everything seems to be working fine. The only issue is that my DRL’s don’t seem as bright as other trucks like lariat’s, platinum’s, limited’s, etc. I also didn’t plug in the fuses that came with the harness because regardless of where I’d plug it into, my DRL’s stayed on even when my truck was off, lights switched off, no key in ignition, and truck locked. Any suggestions on how to make my DRL’s brighter ? And where to plug in the fuse ? I know it has something to do with do with the fuse but i may wrong but I ran out of ideas on where to plug in to. Please and thanks
Hi. This sounds odd. Where did you purchase the harness?
Very nice! I hope you still have this in stock. Looking for possible appointment but hard to get ahold of you guys.
Hi Doug. The number is 954-643-3627. If we don’t answer, please shoot us a text and someone will get back to you.
Hey I have these headlights aswell! So with my wiring harness it has two 15amp fuses in it. Do I just take both of those out and plug in the 10 amp fuse?
Looks exactly the same just different colors but one looks way out of adjustment which was the leds!
I have question about function on the DRL. Does it have a full power mode and a dim mode? It did not appear that the DRL dimmed when you turned on the low beams.
Hello. Yes there is a full power mode and a sim mode whenever the headlights are engaged.
Tony - after you’ve got the OEM headlights installed, and before you do the forscan, how functional are the headlights?
Just curious if I can do the forscan later, or if that would cause a problem with the ballasts.
Not functional. You’ll have a plethora of issues.
I’m in Dallas looking to get this done to my truck. Waiting on the harness to arrive but ready once it’s here. What’s the shop address if you don’t mind. Thanks in advance
You ever get them done boss
Hi I have 2020 lariat and it did not come with the led headlights. Do you have a location in San Antonio texas? Id like to get these headlights installed ASAP
Hi Steven. We do not have a location in San Antonio, however we’re located in Dallas and wouldn’t mind making the trip there. Give us a call or shoot us a text tomorrow to discuss details. 469-227-0573.
But where u r pointed your finger that's not fuse 36......
I have fat fingers but the good thing is that you have a fuse box diagram that can show exactly where it is….
On the OEM LED connector which wire or PIN is the power for the DRL?
If memory serves correctly, driver side is DRL is grey with blue stripe and passenger side DRL is violet with white stripe. I would definitely double check though.
Do you guys do installations? And if so how much do you guys charge for installation?
Hello yes we do. Assuming that you have all the parts needed including headlight housings and relays, installation will be $150.
Hey you think I could put that grill and OEM headlights on 2017 Ford F-150 lariat
It can be done but you will need quite a few parts and some harness rewiring and programming.
how did you put back the fender flares i am having real issues clipping the 2 clips back in pls help
The easiest way is to remove the clips from the fender itself, and place them on the flare and clip them back in. Otherwise you’ll struggle all day trying to get them back on.
Did you figure it out ?
Where can I buy exactly the same harness?
Here you go! hidexpresslighting.com/shop/ols/products/ford-f150-oem-led-conversion-2018-plus
This is oem led or vland?
Oem
@@hidexpresslighting5965 how much you charge for the install
how to distinguish the oem n the vland?
VLAND's Turn Signal or Blinker lights up the entire LED AMBER.
@@edykam5590
Why are your morimoto headlights hella more money than other places?
The same reason that you’re asking this question on TH-cam versus any of the listed contact methods….
What size tire?
I need harnesses for 2017 lariat
Can u help?
Sure thing. Give us a call or text tomorrow morning. 9546433627.
In the forscan 726-50-01 what do I put?? I need help thanks.
08xx
Edgar have a link?
where are you guys located
We’re located in Frisco Texas. Feel free to message us at 954-643-3627.
Dang 2 G’s . Spendy
3500 Morimoto blows them out the water
Over priced
Fairly priced. What’s over priced is fuel, groceries, taxes, homes, rent….. yeah.