Definitely. I have the Gen1's and I swear they're crosseyed. The driver's side beam pattern crosses all the way over to the passenger side. I know how to adjust them up and down, but not sure what the deal is with that driver's side.
Just installed these on a 2018 F-150 WITH factory LED headlights. Here are two things they are wrong about and will save you a big headache. 1) sequential must be PLUGGED IN to work 2) even with factory LED’s you still have to run the fuse box wire to have DRL’s. Great headlights fit and functionality is very good.
Wish I saw this comment literally 2 days ago just took off my whole front end once again to figure out why the startup sequence wasn’t working and I just got an email back from morimoto saying to run the drl harness and I was confused because this video said the exact opposite if I didn’t see this comment I would still be confused THANK YOU 🙏 🙏🙏 Edit: now I’m realizing I have to take apart my front end for the third time 😭🤦♂️ I also don’t understand why morimoto can’t make a video on how to install their headlights with factory LED’s smh
@@BenVincelette I believe I paid 1400-1500 for the pair. I was going to install them, but was under the weather at the time, so a buddy put them in for me. Pretty straightforward install. Just time consuming taking everything off to put them in. No issue with them thus far, knock on wood.
I have the Gen 1 XB LED for the 2018+ F150. As nice as these are it's definitely not worth upgrading. The cost of repurchasing it plus the headaches of installing it makes it a no go. My truck has the fender flares and it's a pain to release. For new purchasers this is a MUST.
I watched a review headlight revolution did for the Gen1 Morimotos for a 2015 F150 and the lows are 1330lux and a high beam of 4150lux. Either the Gen2 aren’t brighter, or their reviews are not consistent.
I just installed mine but i connected the turning signal plugs, not knowing it wasnt gonna give me the sequential turning light, :/ now i have to go back and remove to get it the way i want it, thank you guys for explaining the wiring as i was confused when i was installing!!!
install video is on point , installed mine today no issues . on another note . i was expecting brighter bulbs . not on my impressed scale for brightness .
If you are talking about the XB LED Headlights, that light outout that we get from those is amazing! I would suggest aligning the headlights to give you the most amount of light output down the road, let us know what you come up with!
Glad you got that taken care of, they sure do shine bright down the road when they are properly aimed! If you need anyting else, we are here to help! Have a great day!
So far they seem to be working but my inside turn signal on driver side is hyper flashing. The passenger side is not. Both signals are working though. Any idea why only one side is hyper flashing?
Thank you! You can purchase them from our website and have them installed at most automotive shops. I couldn't give you an approximate install cost since everywhere will be different!
I had the Gen 1 on my '17 F150. Always had radio interference with or without the optional magnets. I seem to be in the minority. Do you have any radio interference with the G2? Would like more light in my '19
This isn't an issue we've heard of before. Did you ever try reaching out to our support team to see if we could help you fix that? We haven't seen that issue thus far on the Gen 2s either!
That is odd, if you are looking for the link to the headlights in this video, that is the same link as we have listed in the video descroption, and I have linked that for you again right here: www.headlightrevolution.com/ford-f150-xb-led-headlights-B-LF501_2?quantity=1
Just wanting to verify. Do I still need to run the DRL wire to the fuse box if I currently have an LED wired truck. 2020 Limited. Thanks in advance and thanks for the great video. Will be purchasing soon.
Sorry, sir, I have no intention of offending. 🤣🤣I also recognize your test and like your video very much. 🤩I have been following you and hope to share good products with more people. I hope to share with you my headlights.I can send you a set of lights for your test.Would you like to have a try！
No offense taken my man!😂 Thanks for the offer, we are not looking to take on any new products at this time, but we will let you know if that changes down the road! Have a good one!
That is for if you have an OEM LED truck, but if you do not have OEM LED then youwill just leave that as it is! If you have any other questions, let us know! Have a great day!
@@HeadlightRevolution The video you did for the 2015 F150 the XB low beam was 1330lux and high beam was 4150lux. Is this product not brighter or did you guys mess up on the testing? The high beams have a 2740lux difference?
Going to install the second GEN 2version today on my 2018 F150. My truck is also lifted 6 inches, is there a good video or process to adjust the headlights? I didn’t know if there was any thing I need to do different because my truck is lifted
You will want to check out the video linked below on how to align those headlights, and you will want to make sure to align them lower as you have a lifted truck. If you need anything else, dont hesitate to ask! Video link: th-cam.com/video/OIow5YgdRro/w-d-xo.html
I am not sure if they will be coming out with that, if so, we haven't heard anything at this point. We will keep you posted on when/if those are going to be available!
weird. mine are backwards. for mine to be sequential i have to have them plugged in BUT they will only go sequential for a sec & then they stay solid. need help :/
I am sorry to say that there is nothing that can be done to get that to work as they did with that factory headlight, you will have to simply use the headlight switch. Sorry about that!
Hello. I just installed these. My startup sequence is not even remotely close to what you guys show, and I did doulbe check they are the Gen 2's. My startup sequence has the amber sequential activate once. What did I do wrong?
That sounds very odd, that should not be functioning like that. Any chance you could email in to us with a video of this happening, so we can get a better understanding of what is going on? Shoot that over to us and we will do our best to get this issue resolved! Sales@HeadlightRevolution.com
@@HeadlightRevolution I will try to take video's soon. I did do some troubleshooting beofre dropping ti off for an audio appointment: When hooked up the way it says to, I think its fus 26 or 36 or whatever, the startup sequence does in fact work, but only on one side, and it doesnt 100% do it correctly, and then only one drl comes on after that, so thats why it got switched to the 2nd option for the fusebox, and then everything works correctly.....except the startup sequence.
That is odd, have you tried tapping that into fuse #16? That would be another fuse that you could tap it too, that might help with some of the issues you are seeing! Try that and let us know by email what you come up with! Sales@HeadlightRevolution.com
@@HeadlightRevolution I tried fuse 16, same thing. Is it possible that 1 or both of the fuses on top of the that pigtail/jumperharness that plugs in could be bad? No response from Morimoto in 10 days......
Any idea what would cause the lights to turn on by themselves? I've noticed that they do it every now and then, truck off, key fob nowhere near the truck, lights come on for a few seconds then turn back off
It's amusing just how many people who show how to work with vehicles always say they will "go ahead" to do something. You cannot count how many times these people "go ahead" to do something LOL...
Anyone find a workaround with the fuses? because my DRL stay on for a good while after I turn off my truck, please let me know if anyone has a solution
Just wondering, had these for a few months now, still trying to figure out if im happy with my aiming- are people aiming these left and right or do they seem decent out the box?
Pull your truck close up to a wall as close as possible and mark the center of the wall with tape. Back up 25ft and adjust beams to hit those marks. There more detailed instructions out there but that's a simple version
@@Doodooheadguy-fishing thanks I tired this method a few times. The beam pattern on these headlights is terrible… once you back off the wall your clean beam pattern is gone. Totally not worth the money, I had better results with a simple LED bulb upgrade. I regret buying these every time I drive at night. And then don’t get me started on the high beams, they’re trash.
These will totally work with that vehicle as the title states! As for our address, I have included that for you here: 2281 Defoor Hills Rd NW, Atlanta, GA 30318
Just curious on why the original +2018 video shows stock halogens as low beam 560 max lux and high beam 1210 max lux. But this video for the gen 2 +2018 shows stock halogens as low beam 290 max lux and high beam 710 lux?
You know, that is very interesting! I am not sure why they were different, but I would assume that the reading in the old video was a little off due to that old video being in the old shop. Not sure if that would change anything, but that new video does have the correct numbers!
@@HeadlightRevolution I thought it was interesting also. I appreciate the response. The gen 2 look like a very nice upgrade. I currently have the OEM led's. Looking at upgrading in the near future.
This is absolutely the best description & installation video I've seen for the XB's, thank you.
Videos showing how to adjust these lights will be greatly appreciated! Lots of installation videos, but none on how to adjust them.
Definitely. I have the Gen1's and I swear they're crosseyed. The driver's side beam pattern crosses all the way over to the passenger side. I know how to adjust them up and down, but not sure what the deal is with that driver's side.
Just installed these on a 2018 F-150 WITH factory LED headlights. Here are two things they are wrong about and will save you a big headache.
1) sequential must be PLUGGED IN to work
2) even with factory LED’s you still have to run the fuse box wire to have DRL’s.
Great headlights fit and functionality is very good.
Thank you for your feedback
Are they much better then stock leds are they worth the money and time?
My Sequential wire is plugged into each other and they are still solid turn style?
Wish I saw this comment literally 2 days ago just took off my whole front end once again to figure out why the startup sequence wasn’t working and I just got an email back from morimoto saying to run the drl harness and I was confused because this video said the exact opposite if I didn’t see this comment I would still be confused THANK YOU 🙏 🙏🙏
Edit: now I’m realizing I have to take apart my front end for the third time 😭🤦♂️ I also don’t understand why morimoto can’t make a video on how to install their headlights with factory LED’s smh
Awesome video guys.
Love the lights.
Just need to explain to my wife that need these 😂.
Thanks for watching, hope she agrees! 🤞🏻
love the look, wish they came in more colour ways than black, would like to match the OEM Ford look.
Thank you for the feedback
Doing my F-150 in a black/white theme, just ordered these yesterday, looking forward to seeing them in the truck.
How much did they run you and how did the install go?
@@BenVincelette I believe I paid 1400-1500 for the pair. I was going to install them, but was under the weather at the time, so a buddy put them in for me. Pretty straightforward install. Just time consuming taking everything off to
put them in. No issue with them thus far, knock on wood.
@@josephanderson3551 I had factory halogens.
These are amazing but good lord they are are expensive. Hope they are made in the USA for that price
Made in Taiwan, very high quality!
@sam " made in taiwan " lol
I have the Gen 1 XB LED for the 2018+ F150. As nice as these are it's definitely not worth upgrading. The cost of repurchasing it plus the headaches of installing it makes it a no go. My truck has the fender flares and it's a pain to release. For new purchasers this is a MUST.
Sorry to hear you don't think they are worth the upgrade! They have blown us away, wish they did the same for you!
I watched a review headlight revolution did for the Gen1 Morimotos for a 2015 F150 and the lows are 1330lux and a high beam of 4150lux. Either the Gen2 aren’t brighter, or their reviews are not consistent.
@@HeadlightRevolution I'm sure they are great, however I don't feel like spending a fortune on another set.
I just installed mine but i connected the turning signal plugs, not knowing it wasnt gonna give me the sequential turning light, :/ now i have to go back and remove to get it the way i want it, thank you guys for explaining the wiring as i was confused when i was installing!!!
Happy the video helped you!
Hate to be that guy but what size lift and tires 👀
What is the wheels and lift specs please and thank you ‼️‼️🔥🔥
Love the look of these headlights. What size wheels and tires are you running on this truck? I love the stance on that truck😍
This was a volunteer truck, not sure about those details. Sorry man!
You guys don’t have it for the 15-17models???
Right here!
www.headlightrevolution.com/ford-f150-xb-led-headlights-15-17-B-LF502_2
Can you replace the bulb if it goes out or no?
What bulb? This is one unit non serviceable parts.
You can't remove the bulb, but if you ever had one go out, we would get that replaced for you entirely under warranty!
@@HeadlightRevolution What if its over 5 years?
install video is on point , installed mine today no issues .
on another note . i was expecting brighter bulbs . not on my impressed scale for brightness .
If you are talking about the XB LED Headlights, that light outout that we get from those is amazing! I would suggest aligning the headlights to give you the most amount of light output down the road, let us know what you come up with!
@@HeadlightRevolution that’s what it was . needed adjusted . they were shooting out high and far :)
Glad you got that taken care of, they sure do shine bright down the road when they are properly aimed! If you need anyting else, we are here to help! Have a great day!
Will there be gen 3 coming out?
Ask Morimoto!
will there be a gen3 coming out ?
So far they seem to be working but my inside turn signal on driver side is hyper flashing. The passenger side is not. Both signals are working though. Any idea why only one side is hyper flashing?
Odd only one side is doing it, can you reach out so we can help? sales@headlightrevolution.com or 218-755-5200
Awesome video. All, best place to buy and get it installed? And approx installation cost? Thanks!
Thank you!
You can purchase them from our website and have them installed at most automotive shops. I couldn't give you an approximate install cost since everywhere will be different!
Do they work on 2018 F150 Lariat with OEM LED headlights?
Yep, I just emailed them about my 2020 with factory LED’s. They said they work on them all.
I may have had way to many beers but is Caleb the boost auto parts guy?
Not the same 🤣
Is it possible to have the DRL glow amber instead of white?
Unfortunately, that is not possible with that headlight, sorry about that! Let us know if you have any other questions or concerns!
been waiting for that 4 low beam at once? damn.
Pretty nice with all that light output! Thanks for the support!
I had the Gen 1 on my '17 F150. Always had radio interference with or without the optional magnets. I seem to be in the minority. Do you have any radio interference with the G2? Would like more light in my '19
This isn't an issue we've heard of before. Did you ever try reaching out to our support team to see if we could help you fix that?
We haven't seen that issue thus far on the Gen 2s either!
How much will they be on sale on cyber Monday. Willing to wait a month lol
Wish I knew thoes numbers, they do not tell us that until right before the sale goes live. We will keep you posted!
i wish some of these awesome headlight comes to upgrade the expedition 2018+ , not only f150 all the time :(
Hopefully Morimoto will get something going for those Expeditions!
The link you provide to purchase isn't working this morning.
That is odd, if you are looking for the link to the headlights in this video, that is the same link as we have listed in the video descroption, and I have linked that for you again right here: www.headlightrevolution.com/ford-f150-xb-led-headlights-B-LF501_2?quantity=1
Just wanting to verify. Do I still need to run the DRL wire to the fuse box if I currently have an LED wired truck. 2020 Limited. Thanks in advance and thanks for the great video. Will be purchasing soon.
If you have the LED DRL strips from the factory, you will not need the DRL fuse tap harness!
Does that work for the Raptor too?? I just installed mine and everything appears to be working!
Is it possible to disable the startup sequence?
Its programmed in unfortunately
Do the lights come pre-aimed and adjusted?
No, they will be close to where they need to be but will need some fine-tuning.
is forscan needed at all?
Nope!
so i cant put these on my f150 because it didnt origianlly have LED?
Yes
If your truck came with halogens from the factory you can run these housings.
What song is that during the intro? It's awesome. Just installed mine today, thank you for the great install video!
I wish I knew that, unfortunately I do not have that information for you. It must have been an open source song out there, sorry abou that!
Do you need higher, brighter, more concentrated LED bulbs？
Everyone does! Thats why we carry products like the XB LED Headlights, you really can't beat them!💯💪
Sorry, sir, I have no intention of offending. 🤣🤣I also recognize your test and like your video very much. 🤩I have been following you and hope to share good products with more people. I hope to share with you my headlights.I can send you a set of lights for your test.Would you like to have a try！
No offense taken my man!😂 Thanks for the offer, we are not looking to take on any new products at this time, but we will let you know if that changes down the road! Have a good one!
Headlight Revolution Good products take time to be found and good video makers worth waiting. 🤩👏Thanks man！
Thanks for the support my man, let us know if you have any other questions! Have a good one!🙌
I just finished installing the gen 2 and my check engine light is on and I don’t get the start up sequel what can be the problem?
Please reach out to us,
218-755-5200
Sales@HeadlightRevolution.com
What is the single orange wire connector for that has a plug with a blue dot on it
That is for if you have an OEM LED truck, but if you do not have OEM LED then youwill just leave that as it is! If you have any other questions, let us know! Have a great day!
Is there a picture comparing the light output of Gen1 vs Gen2?
We do not have a comparison yet, but we will get one out to you since that will be a commonly asked question!
@@HeadlightRevolution The video you did for the 2015 F150 the XB low beam was 1330lux and high beam was 4150lux. Is this product not brighter or did you guys mess up on the testing? The high beams have a 2740lux difference?
Is there an actual aiming guide to this ?
You can use the general headlight aiming guide on our page!
My truck doesn't have any leds @ all do any of these headlights adapt to that?
These would be completely plug and play with no issues!
Going to install the second GEN 2version today on my 2018 F150. My truck is also lifted 6 inches, is there a good video or process to adjust the headlights? I didn’t know if there was any thing I need to do different because my truck is lifted
You will want to check out the video linked below on how to align those headlights, and you will want to make sure to align them lower as you have a lifted truck. If you need anything else, dont hesitate to ask!
Video link: th-cam.com/video/OIow5YgdRro/w-d-xo.html
Do these Gen2 XB's come in Chrome?
That gear is a real shotty way for headlight adjustments, my alpha Rex headlights has the same thing and it’s a pain to adjust compared to the oem
Those bad boys actually use adjuster screws that are in roughly the same position as the factory adjusters! Nice and simple!👍
Are they going to have a gen 2 for the 15-17 version?
I am not sure if they will be coming out with that, if so, we haven't heard anything at this point. We will keep you posted on when/if those are going to be available!
weird. mine are backwards. for mine to be sequential i have to have them plugged in BUT they will only go sequential for a sec & then they stay solid. need help :/
Reach out to our CS team so we can help you with this!
218-755-5200
Sales@HeadlightRevolution.com
Is there any certain thing you have to do to make auto on/off hi-beam still work with these?
I am sorry to say that there is nothing that can be done to get that to work as they did with that factory headlight, you will have to simply use the headlight switch. Sorry about that!
Hello. I just installed these. My startup sequence is not even remotely close to what you guys show, and I did doulbe check they are the Gen 2's. My startup sequence has the amber sequential activate once. What did I do wrong?
That sounds very odd, that should not be functioning like that. Any chance you could email in to us with a video of this happening, so we can get a better understanding of what is going on? Shoot that over to us and we will do our best to get this issue resolved! Sales@HeadlightRevolution.com
@@HeadlightRevolution I will try to take video's soon. I did do some troubleshooting beofre dropping ti off for an audio appointment: When hooked up the way it says to, I think its fus 26 or 36 or whatever, the startup sequence does in fact work, but only on one side, and it doesnt 100% do it correctly, and then only one drl comes on after that, so thats why it got switched to the 2nd option for the fusebox, and then everything works correctly.....except the startup sequence.
That is odd, have you tried tapping that into fuse #16? That would be another fuse that you could tap it too, that might help with some of the issues you are seeing! Try that and let us know by email what you come up with! Sales@HeadlightRevolution.com
@@HeadlightRevolution I tried fuse 16, same thing. Is it possible that 1 or both of the fuses on top of the that pigtail/jumperharness that plugs in could be bad? No response from Morimoto in 10 days......
Any idea what would cause the lights to turn on by themselves? I've noticed that they do it every now and then, truck off, key fob nowhere near the truck, lights come on for a few seconds then turn back off
If you're still having issues email service@morimotoHID.com
Are the beams preset to factory settings?
They need to be reaimed.
Damn, just bought the gen 1s for that truck 2 months ago
They are still some fantastic headlights, but if you want to upgrade just let us know! Have a good one my man!
So they don’t fit the 2015
These specific headlights don't, but these are made for the 15!
www.headlightrevolution.com/ford-f150-xb-led-headlights-15-17-B-LF502_2
It's amusing just how many people who show how to work with vehicles always say they will "go ahead" to do something. You cannot count how many times these people "go ahead" to do something LOL...
Anyone find a workaround with the fuses? because my DRL stay on for a good while after I turn off my truck, please let me know if anyone has a solution
Shoot us an email, we can recommend some different fuse locations! sales@headlightrevolution.com
Dang i just bought the hybrids 2 months ago lmao
You are still good, this is the Gen 2 for the full XB LED headlights!
Just wondering, had these for a few months now, still trying to figure out if im happy with my aiming- are people aiming these left and right or do they seem decent out the box?
We always recommend aiming them so you know the pattern is correct.
Pull your truck close up to a wall as close as possible and mark the center of the wall with tape.
Back up 25ft and adjust beams to hit those marks. There more detailed instructions out there but that's a simple version
@@Doodooheadguy-fishing thanks I tired this method a few times. The beam pattern on these headlights is terrible… once you back off the wall your clean beam pattern is gone. Totally not worth the money, I had better results with a simple LED bulb upgrade. I regret buying these every time I drive at night. And then don’t get me started on the high beams, they’re trash.
@@Mat0 wow. I was already wary just based on price tag. Plan on going with the first Gen Xbox hybrid
Almost 2 grand a piece?
That's for the pair!
Wondering it work on XLT F150 2020
Can I have your location Address
These will totally work with that vehicle as the title states! As for our address, I have included that for you here: 2281 Defoor Hills Rd NW, Atlanta, GA 30318
Man Ford buttons down these vehicles like they’re going into space. So many screws and panel clips 😅
They really didn't make it the easiest, thats for sure!😄
It's a hell of a lot better than Volkswagen's panel clips, that's for sure.
Not sure I have had the pleasure of running into those yet, but I know BMW plastic clips and how bad they are!
Just curious on why the original +2018 video shows stock halogens as low beam 560 max lux and high beam 1210 max lux. But this video for the gen 2 +2018 shows stock halogens as low beam 290 max lux and high beam 710 lux?
You know, that is very interesting! I am not sure why they were different, but I would assume that the reading in the old video was a little off due to that old video being in the old shop. Not sure if that would change anything, but that new video does have the correct numbers!
@@HeadlightRevolution I thought it was interesting also. I appreciate the response. The gen 2 look like a very nice upgrade. I currently have the OEM led's. Looking at upgrading in the near future.
Those OEM LEDs are fantastic, but you get that awesome face lift with those Morimoto XB LED Headlights, nice to change up the font end look!
$1600 is a lot for cosmetic upgrades
Not really when you consider there perform better than OEM and have a 5 year warranty.
Can the light bulbs be replaced/upgraded ?
No, these are sealed units.