I’m glad I have a 14 too many clips and stuff in the way just to remove headlights 😂.. looks good though 🤙🏼.. if that brown one didn’t clip throw some electric tape on it just to keep it from coming off with the vibrations or anything
Yup, electric ⚡️ tape for sure 😂 But I don’t think I should have to do that. well some people believe they get what they payed for but $700 is pricey bro. They should be designed better.
I went through 2 different sets of VLAND LED projector headlights and ALL four headlights had problems; three of the LED projector rectangle bulbs came loose and shined UPWARD or DOWNWARD and one LED halo stopped working on the lower half. I had to remove them and install my Halogens until I purchased OEM LED Headlights for $2,400.00 from Ford.
Not sure if my answer is valid. I only had the head lights for 2 months. I do like them so much but I did face an issue with the passenger turn signal. you can always buy the platinum or lariat with a harness and make it work on you truck check out instagram.com/retro_customzfan? They have some nice headlights oem headlights paint match 👌🏼
Yes, you can fix it with fordscan www.amazon.com/Forscan-Scanner-ELMconfig-FoCCCus-Diagnostic/dp/B07MQ8GHG3/ref=mp_s_a_1_5?crid=2MFL4ON3NFRV7&keywords=ford+scan&qid=1659096848&sprefix=ford+scan%2Caps%2C103&sr=8-5
@@Built4SpeedRacing on the forscan which one should go for I have vland headlights and anzo taillights with resistor. I have a that hyper flash on my dashboard
I’m having problems with driver side. looks like that brown connection is trash after all 😤 turn signal turns on and off as it pleases. I’m thinking of splicing the cables but a buddy suggested to buy the black connectors for these lights.
@@relsoc yes, i have my eyes on somthing like this th-cam.com/video/91DKRNGMphg/w-d-xo.html but retrocustomz1 on ig have good light too more stock looking like the ones I have right now
Hey I have em on my 2020 F150 Stx 4x4 do the daytime stay on all the time. I already try the settings and it still stay on. Are they supposed to be like that.
@@Built4SpeedRacing how do I turn them off I plug everything right and it all good and double check. I already went to the dash settings and disable it and it still on. I bought the full animation
I just installed vland headlights on my 21 f150, and ur video was perfect for the installation. Suprisingly the only one out there that does an installation of vland lights for f150. But, I was wondering if you also had this problem: my turn signals blink faster inside the truck but are perfect outside, did u have something similar?
@@Built4SpeedRacing also, I noticed today (2md day after install) that passenger side drl only turns on when engine is on. When I press unlock with keys, only driver side drl is turning on. Do you know what could be causing this?
I’m guessing you have a governor on your truck. A tune usually takes it off, but just let your tuner know. I was always able to go over just not as fast 😎.
On both of them ? I would suggest to put pressure on the connections to see if thats the problem. I had problems with the brown connection and the DRL lights so I just splice them directly and problem solved.
@@Built4SpeedRacing Alright so yea the high beams and the right light turn signal didn’t work bro so I messed with the brown connections and the turn signal work put it all together and only one light the led bulbs work and High beam work on only one smh.. should I put it together again.
@@Built4SpeedRacing gotcha. I just had a shop install them today. They didn’t hook it up to the fuse relay. Everything is working fine. But I noticed when I turn the blinker on, the blinker icon will flash fast for a couple secs then go back to normal. But the blinker does stay on consistently. Very odd.
@@Built4SpeedRacing i bought these headlights from my cousin, but i guess he didn't had that adapter that goes from stock halogen to LEDs (3 to 1 plug), and i wasn't told before buying them. But i just found them for sale on ebay, along with the fuse for the DRL lights. Hopefully i should be good to install once I get them.
@@Built4SpeedRacing had to lol, after taking everything apart and finding out i couldn't even hook them up because of that.. 🤦🏻, he ended up paying for half of it tho. But thanks!
They look super clean 👌🏽👌🏽
Thanks for the content sinister !
I’m glad I have a 14 too many clips and stuff in the way just to remove headlights 😂.. looks good though 🤙🏼.. if that brown one didn’t clip throw some electric tape on it just to keep it from coming off with the vibrations or anything
Get that fiesta st 3rd brake light already for the focus that white one 👎🏼 😂
Yup, electric ⚡️ tape for sure 😂
But I don’t think I should have to do that. well some people believe they get what they payed for but $700 is pricey bro. They should be designed better.
You Sure are right 😁I’m order that one right now👍🏽
@@Built4SpeedRacing that’s not good on their behalf 😂.. or a zip tie I’ve seen that too
thanks i struggled with mines that piece of plastic
man
I went through 2 different sets of VLAND LED projector headlights and ALL four headlights had problems; three of the LED projector rectangle bulbs came loose and shined UPWARD or DOWNWARD and one LED halo stopped working on the lower half. I had to remove them and install my Halogens until I purchased OEM LED Headlights for $2,400.00 from Ford.
This is the kinds mechanic that gives your truck back with zip ties where body pins used to be 😂
🤣 I promise, I never done such thing 😓
Hi do you recommend to buy it ?? I’m planning to buying vland but I saw some reviews they usually faces issues after 6 months.
Not sure if my answer is valid. I only had the head lights for 2 months. I do like them so much but I did face an issue with the passenger turn signal. you can always buy the platinum or lariat with a harness and make it work on you truck check out instagram.com/retro_customzfan?
They have some nice headlights oem headlights paint match 👌🏼
@@Built4SpeedRacing u mean hyperflash for the turn signal ?
@@VzezV no ,like it literally stoped working no turn signal at all
🔥🔥🔥
does the led beam stay on while your driving?
Yeah,if I turn it on. The problem I had was the turn signal cee strip. I fixed it by splicing the connection made a video about it.
Did your headlights ever make the turn single on the dash hyper flash? Because it’s happening to me and I’m not sure how to fix it
Yes, you can fix it with fordscan www.amazon.com/Forscan-Scanner-ELMconfig-FoCCCus-Diagnostic/dp/B07MQ8GHG3/ref=mp_s_a_1_5?crid=2MFL4ON3NFRV7&keywords=ford+scan&qid=1659096848&sprefix=ford+scan%2Caps%2C103&sr=8-5
@@Built4SpeedRacing on the forscan which one should go for I have vland headlights and anzo taillights with resistor. I have a that hyper flash on my dashboard
@@amadoberumen7714 th-cam.com/video/PsQoQ9wbkzc/w-d-xo.html
Looks good! I just ordered a set for my f150. How are your still holding up?
I’m having problems with driver side. looks like that brown connection is trash after all 😤 turn signal turns on and off as it pleases.
I’m thinking of splicing the cables but a buddy suggested to buy the black connectors for these lights.
@@Built4SpeedRacing that’s kind of what I’m afraid of. So if you were in my shoes would you go a different route?
@@relsoc yes, i have my eyes on somthing like this th-cam.com/video/91DKRNGMphg/w-d-xo.html but retrocustomz1 on ig have good light too more stock looking like the ones I have right now
Hey I have em on my 2020 F150 Stx 4x4 do the daytime stay on all the time. I already try the settings and it still stay on. Are they supposed to be like that.
What!? No bro. Not all the time, just when you have the lights on.
@@Built4SpeedRacing how do I turn them off I plug everything right and it all good and double check. I already went to the dash settings and disable it and it still on. I bought the full animation
@@amadoberumen7714 did you make sure to plug-in the fuse in the right slot ?
@@Built4SpeedRacing yes I even look at it when you told me and look at the manual too
@@amadoberumen7714 mmm🤔I want to see how you connect looks. you got Instagram?
where did you buy the harnesses
They come with the head lights. I ended up splicing them that plug was trash.
Where did you get the conversion kit from ?
Headlights are plug and play. If you have halogen bulbs like what I had before then they are 100% direct bolt on👍🏽
I just installed vland headlights on my 21 f150, and ur video was perfect for the installation. Suprisingly the only one out there that does an installation of vland lights for f150. But, I was wondering if you also had this problem: my turn signals blink faster inside the truck but are perfect outside, did u have something similar?
is been a while but you can fix all that with fordscan
@@Built4SpeedRacing also, I noticed today (2md day after install) that passenger side drl only turns on when engine is on. When I press unlock with keys, only driver side drl is turning on. Do you know what could be causing this?
not really bro. did you watch the other video on the head lights maybe is the plug @@HyderAli-qu8sd
@@Built4SpeedRacing which other video?
@Built4SpeedRacing nvm I found it. Damn, I'm really gonna have to take off everything again.....lol
Hey there where did you buy this harnesses?
It came with the head lights. I ended up splicing the cable’s directly. still no problems
Do they still work?
Yes,no problem so far 👍🏽
Are you in Chicago ?
No bro tx but I like going down to Mexico to 🏎 💨
Will it fit a 2020 lariat
No bro these are for the non led like xl xlt stx
What tune to go over 106mph ?
I’m guessing you have a governor on your truck. A tune usually takes it off, but just let your tuner know. I was always able to go over just not as fast 😎.
My high beams don’t turn on mines what can it be ?
On both of them ? I would suggest to put pressure on the connections to see if thats the problem. I had problems with the brown connection and the DRL lights so I just splice them directly and problem solved.
@@Built4SpeedRacing Alright so yea the high beams and the right light turn signal didn’t work bro so I messed with the brown connections and the turn signal work put it all together and only one light the led bulbs work and High beam work on only one smh.. should I put it together again.
@@10r80richyrich okay then switch the head light on the left to the right and the right to the left just to see if is not the bulb that Is burn out
@@10r80richyrich this is what I did just make sure you save your stuff just in case you have to go back
th-cam.com/video/hkw4Xai6-yI/w-d-xo.html
What’s the reasoning to using the fuse relay? Is that needed.
I don’t remember but I think it was the DRL not blinking when you put turn signal
@@Built4SpeedRacing gotcha. I just had a shop install them today. They didn’t hook it up to the fuse relay. Everything is working fine. But I noticed when I turn the blinker on, the blinker icon will flash fast for a couple secs then go back to normal. But the blinker does stay on consistently. Very odd.
Where can I get that adapter
adapter ?
@@Built4SpeedRacing i bought these headlights from my cousin, but i guess he didn't had that adapter that goes from stock halogen to LEDs (3 to 1 plug), and i wasn't told before buying them. But i just found them for sale on ebay, along with the fuse for the DRL lights. Hopefully i should be good to install once I get them.
@@mr.anonymous.4012 sorry to hear that brother. did you kick his butt at least? and nice! glad you got it sorted out.
@@Built4SpeedRacing had to lol, after taking everything apart and finding out i couldn't even hook them up because of that.. 🤦🏻, he ended up paying for half of it tho. But thanks!