How to adjust the trunk latch on a car - Ford Focus
ฝัง
- เผยแพร่เมื่อ 17 มิ.ย. 2013
- If the trunk latch on you car is loose, or if your car's trunk lid rattles and doesn't close tightly, here is how to tighten the car trunk latch and make your trunk close tightly.
- ยานยนต์และพาหนะ
2020 and still a legend. Thanks
You’re welcome.
Legend! My boot/trunk has been leeking slightly and then I noticed the lid moves slightly when I push it. This should solve it a treat! Thanks man =)
You're welcome!
Pretty helpful vid, especially considering that I have a Ford Focus as well. Thanks man.
You're welcome. If your Focus has the SOHC engine, you should watch this video:
th-cam.com/video/fx8Ta871wZg/w-d-xo.html
If you have the Ztec engine, you don't need to worry about it.
Helpful vid btw
Thanks.
he didn't mention most important part , what is the torx bit size ???
Same problem with a mk2 '06 Focus, but there are no visible screws so I could tighten or loosen them.. :/
I wonder where they are? Maybe rivets on the inside?
This is a headache. Thank you for the info. I have the same problem on my Crown Vic. I will try this and see what happens.
+Carlos Elias You're welcome. I hope it works.
Thank you I’ll check for that I think that’s my problem
Its just an Interceptor badge off a Crown Vic V8 Interceptor cruiser
My trunk won't latch close on a 2015 Chrysler 200... Any suggestions
Look for obstructions and alignment issues. Also look for bolts you can loosen and tighten to move things around.
The open door light came on in my Ford Focus and it's the trunk. The problem is the when I close it , it closes but won't lock. I hope this helps. Not trying to spend money lol
I hope this works for you.
" if you have a clean car "😂😂😂
Hey, thanks for the vid! i have this exact same problem! i was wondering what's the name of the type of screwdriver you are using to open those screws?
It is a torx screw.
@@hoohoohoblin thanks! i got it but i still cant quite get the mechanism to line up properly! Ford focus here. i think i'm going to give up and take it in to get looked at!
Thnx!
You’re welcome
What size is the TORX bit?
+dennbro I don't remember. I sold The car so I can't check.
Ok, thank you.
i need to shift my latch up? www.dropbox.com/s/p9rts4v2g01zc4v/Screenshot%202014-02-28%2018.29.15.png my trunk lid doesnt sit flush with the wings
You should be able to shift the latch mechanism around a little bit the way I did it in the video. if you move it down, it will make the trunk lid sit higher.
***** thanks for that, should also fix it