08 Ford Focus Boot won' t open
ฝัง
- เผยแพร่เมื่อ 15 ม.ค. 2020
- Watch Marc Diagnose and rectify a 2008 Focus with a boot/tailgate that wont open.
first we check if we can hear the lock actuating when trying to open the boot via the button.
in this case, we can hear the lock, so we know there is power to the lock which rules out a blown fuse.
we have to open the boot/tailgate from inside the car luggage area and strip the panelling down to expose the lock itself.
these locks are operated using a small internal motor with plastic gearing and are quite common to fail. we had a replacement part on hand and we were able to plug it straight in and test for correct operation.
we realise this isn't always the case, so we will go more in depth in a future video on bench testing the original lock.
due to a lack of an emergency release on this type of lock unit, the latch loop will still be attached to the lock when removed. you will have to open the plastic box (which is very brittle) and dismantle the internal mechanism to free the latch.
then its just a case of re assembly and testing before closing the tailgate to ensure no further issues. - ยานยนต์และพาหนะ
Great video 👍 there is a quick release found it while cutting mechanism open. While still attached to boot there is a little hole on the right hand side where if you pop a small screwdriver in it will release 👍
Thanks! Helped sort out my friend's one - he'd shut a bag handle in the mechanism and jammed it shut.
Thanks for this, its appreciated.
Thanks!! Very helpful! Well explained!
Thanks mate helped me change my one over easy.
Thanks a lot. That helps me to fix mine.
Hi.... My central locking system. Work however I am not haring the actuator activating. I am getting 12v on the first pin. And all the other pins are reading as a ground. Any ideas? Also, how were you able to seperate the actuator for the strike?
Great video! This perfectly mimics my 2005 C-Max. Currently awaiting the replacement lock mechanism. Thanks for sharing!
On my MK2 focus, the boot keeps randomly unlocking and clicking. Any advice? 🙏
If will not open with the button but will open by the unlock on the key.
What do I need look at
How to adjust the striker its better to go down or up the place cause i adjusted an d now i have knocking noise coming from the boot ?
Thank you great video. Also great background track. Who is it please?
I'm curious: Is there a way to open the booth from inside, like the booth release button?
I recently had my tailgate lock on me in my Ford Focus 2007 when i closed the tailgate lightly so it would stay open, i came back to it and the tailgate wouldn't open and the catch didn't seem to fully unlock, i could hear the locking mechanism ok so luckilly after checking another door to see if the car was actually fob locked i pushed down on the tailgate to check if it had fully engaged the lock and it fully locked into place then i was able to use the catch once again to open the tailgate.
Hey! Thanks for the video. Very helpful.
I have the same problem. My focus 08 trunk won't open. The central lock works but I don't hear any sound from the trunk. Do you believe that I should replace the lock 🔒?
Thank you
Hey, if you aren't getting any sort of sounds or operation of any kind from the lock, after getting the trunk open I would first check the multiplug.
You want to check you're getting correct voltage readings easy way to do this is plug in your multimeter and with the lock latched. Try locking and unlocking with the key fob to see if you're getting any readings.
If you're getting good voltage and it's still not working, it's an indication the lock itself may be defective.
Always worth ruling out bad wiring before replacing a part.
Hope this helps.
How much was the replacement unit from the main dealer?
Love these cars. But why the he'll didn't they add a manual released???
Very helpful. My boot is open and the lock is replaced by a used one
Awesome! , glad this helped.
Hello, my Ford Focus 2008 has a boot that won't open. Are you anywhere near Birmingham perchance ?
West Wales sorry, hope you managed to get your boot problem fixed.
I have the problem where the key fob opens it but the button doesn't. It's an ex cop car, so wondering if they disabled the button somehow.
It was very useful but you didn’t show us how you opened the latch of the jammed one to get the U lock metal part
Nice one
Had the same problem. First thing to try is to make sure that the tailgate is fully locked by pushing firmly
down on it. If the tailgate has not slammed shut at any time i.e. gently lowered, it will only have half latched and will not open from the half latched position.
Thanks for this tip Gary! Saved me the whole procedure.
Anyone know where the fuse is located on a 2009 model
This video saved my life! How much torque on the latch bolts?
Hello, my boot will only release via the fob. Is the switch easy to access please?
If you're able to get the boot open, at least you know the lock \ latch is working. Once you take off the interior panel you should be able to see if there's any fixings that need to be undone to release the switch.
Great video but what if you can’t hear the power sound. Is there a fuse or does it all need replacing
What was your issue I have no sound so not sure whether it’s the lock or the rubber switch
Where did you get the replacement mechanism from?
For electrical components such as locks. We always order from the main dealer where possible.
Mines just gone. I’ve read you need to ensure it’s 4 or 5 pin? What’s the difference please?
Also mines an 08 focus.
I had to change the lock in my cmax from 2008 and saw your video how to do it. The lock has now been changed and works fine and it also closes fine. But in the display it says that the trunk is open and I can't figure out why it says that since it closes fine. Anyone have an idea what it could be?
The new lock should have an electrical connector on it.
There is a sensor internal to the lock which should register closed or open.
If this function was working previously then it could be the replacement lock which is faulty.
@@MTMMotorServices ok, yes it worked with the old lock, so maybe it's a bug with the new lock
Thanks for your reply, btw 🙂
The fuse wasn't the issue in this case but sometimes it can be. Maybe next time, show where the fuses are.
That's great! Still, I have to buy a new lock, apparently :(
My lock won’t open or click when pressed is there a fuse just for the booth
Yes, there is, the fuse box is located under the glove compartment. It's the second fuse on the top line. Check this video:
th-cam.com/video/hfCoY_Bwlvk/w-d-xo.html
Look the User's Manual to find out which fuse are you looking for. Or look at this other video:
th-cam.com/video/yvX3BzroIqA/w-d-xo.html
@@ralves58different car the link is for 2015
My switch on door aint there there is a little button but no power going to it where do i go from here
if you know you haven't got power i'd look up the fuse in case it's blown. if all is ok there and you still cant open it, i'd recommend doing it the same way i have in this video if you've got the same model. when the panels are off you can check out the wiring. the wiring loom by the tailgate hinge can be a trouble area for broken wires.
MTM Motor Services thanks mate do you no what fuse number it is
@@sellingthisandthat5160 not off the top of my head. I think there's a few videos online that cover fuses for the tailgate. But if I find out I'll comment back on here for you
My lock is not actuating and not getting power all fuses are fine I tried to have a key programmed today programmed to the car perfectly but will not activate the central locking or unlock the boot what is the issue please checked all fuses and they are fine and all been replaced today when I press the button on the boot it’s making no noise at all
If your central locking doesn't work as well as your boot lock then there could be an issue with the controller either not receiving the signal to lock or unlock or not sending that command to the locks. That should have shown a fault when programming though. As part of the program procedure the receiver should test that its receiving signaled commands from the keys.
If your fault was with only one door or just the boot lock my next step would be to check it has a good earth connection and see what voltage you're getting at the unit. Could be an open circuit or a short.
MTM Motor Services the central locking doesn’t work on the fob or when I put the key in the door, the key is giving 4.33ghz out on unlock and lock but nothing on the car is happening at all, the only door that unlocks on the key is the driver door that’s it
@@charltsevenoaks1691 if you press the key fob and the drivers door unlocks then that shows the body control module is sending the signal to unlock the doors. If you have diagnostic equipment you'll be able enter the module and control the central locking to see what works and doesn't work. I would suggest doing this while also checking voltage at each individual unit while being actuated via diagnostic. It's a little more on depth than your normal DIY job so I would advise you take it to a garage as you are dealing with a delicate system and electrical diagnosis.
MTM Motor Services when I press the key fob nothing unlocks on the car at all I’m thinking maybe it could be the GEM module but then I’ve come across on the focus forum that if the GEM has been changed it can deactivate the central locking
@@charltsevenoaks1691 a way to confirm that is going into the Diagnostics and seeing what's active and what isn't. You'll be able to view all the settings as well as test modes to make sure everything works.
With my key I'm finding it very hard to open my car with the button on the key. My battery is new and so are the batteries in my key fob which I'm changing every few day is it a fuse do you think or issue with button? Please really need help it's annoying the fuck outta me
So, how exactly did you open it?
You'll be able to unbolt the lock from the door but I had to break it apart in order to release the latch
@@MTMMotorServices Wow, ok,thanks, very helpful,i'll take from there;
i have a 2014 Mondeo diesel here,from my neighbour, with the same problem, boot won't open; wish these manufs. were made by them GOVs to install some sort of a pull cord there , why not ? after all,they peck at every other nick nack shite!! :(
th-cam.com/video/3ulh0SLcC4o/w-d-xo.html my mk 2 focus is doing this mate any idea what could be the problem?