How To Install an Amplifier and Subwoofer Into a Mitsubishi Lancer CJ
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- How to install Subwoofer with Amplifier into a 2009 Mitsubishi Lancer CJ.
-Detailed step by step guide
-Amplifier is a Kicker 400.1 Mono Channel Amp
-Subwoofer is dual JBL 1000 WATT GT4
-Music is the respected content of its original owner. I own no rights to this music.
Legend!! Finally a very informative video, with all the steps!! Specially the tricky part of running the wires through the firewall in a RHD lancer, thanks!!
One of the most informative videos I've found. Great video & much appreciated.
Thank you so much! I'm glad that the video was helpful.
Yeah i agree🤗
Thank you so much for this video! i had so much trouble trying to find the damn rubber grommet in the firewall before seeing this video especially since i have a RHD Australian RA Lancer as well.
Glad I could help dude! Cheers
Best Tutorial Video, nice and simple as well straight into the point. No BS
Damm. The carpet covering the groomet from inside. That explain why i can nnot find it. Thanks mate. Your video really helping me.
No worries man! Glad I could help
Brilliant video, gonna help me so much when i come to do my sub in my saloon lancer. Was looking when installing my dash cam for a gromet in the passenger footwell but couldn't see one, now i see why.🤣👍 might actually put the wires in ready for the amp and save my self the trouble before i grab the 10 inch screen
Thank you - finally a useful piece of information on how and where to run the power wire.
Hahahah no worries Michelle! Glad I could help
Great video, likely tomorrow I am going to drag my self outside to do this with my 08 Lancer.
Really wondering if going though the left side is best on North American models, I'll have to poke around & see for my self.
If not, its no big deal, just makes more sense to be to keep everything on the same side.
I'll be doing two wiring kits at once, one for my 4 channel Infinity Reference amp, and another one for my subwoofer & whatever amp I end up buying for it.
I'm a big fan of Harman Kardon so I'll be putting 4 Infinity Reference 6.5 in the doors.
There not going to fit, so I'll either have to make something out of wood to raise them, or cut the holes bigger or both.
Subwoofer wise, I was busy bargain hunting, so I just got my hands on a cheap "dual" brand subwoofer already in a box.
I might just end up buying an amp from the same brand..... there cheap & I would assume it would be the best pairing.....
Technically everything I got is cheap bargain hunting, only paid $100 Canadian for that 4 channel amp from an employee who took it off a display unit from a large Canadian electronics retailer that went under a few years back.
The speakers were all used, paid $40 for them all.
& the subwoofer I got $36 on eBay advertised as "refurbished" but I am pretty sure its a new item that just got returned when someone changed there mind....
Heck my double din Pioneer head unit I already installed was only listed on eBay for $86 "refurbished" & I used a eBay coupon plus my eBay "bucks"
So I paid like $55 for it.
Only thing I paid full retail for was my dash kit & wiring kits. Even then on the lower side of their pricing spectrums...
Perfect. I'm looking for the best speakers to put on the boot pockets of a galant sport-back.
Best video to learn thanks man
Great video, it was awesome! I was hoping to see how you ran the power wire in the engine bay to the battery. It said in the vid you will show it later but I didn't see it.
Maybe I missed it?
Hey man. All I did was run the power wire along the strut brace, cable tied, and down to the battery. I put the fuse holder there as well and it was all nice and neat. That’s pretty much it dude
I dont understand how u connect the blue wire (input to output wire) in the stereo.
Brilliant tutorial man. What was the length of the power cable from battery to the boot for this Lancer?
Hey pah what were the colors for the left +,left -,right +,right - I can’t find a good schematic that shows them 😪
My sorry ass followed these fucking steps perfectly took me about 30min, just to find out that my fucking head unit doesnt have fucking rca outputs, plz end me
"boot" always makes me chuckle.
Aussie Aussie Aussie hahah
This is probably a silly question, but I am not super familiar with head units in new cars, but a 2017 Lancer SE factory head unit would have the RCA ports right?
Factory units, no.
You’ll need hi-level converter use the rear channel on headunit easy process
How to connect a Rockford stock on a gt to a Lancer 2017 is it compatible?
Just a quick question because I didnt really noticed. But did you changed you stereo or was it the original :)
Hi can I ask what did you tap to get RCA input for the amp? +FR and -FR speakers and +RR -RR ? I cant get a feedback
Did you figure it out yet cuz I’m in the same situation
What are the colors of the Front +/- speaker wires for the head unit
Hey how much power wire did u use??? Estimated amount if possible.
Hey man. I'm not sure exactly how much sorry, but if I had to take a rough estimate it would be about 5-6 metres all up! Hope this helps!
Do you just ground it under that bolt you showed? i cant get mine out for the life of me
Yeah man! Its the best option I could find, so If you're able to ground it, do it. You may need some heavy duty tools to remove the bolt, but make sure its free of any paint before connecting. Thanks dude
How many feet of power wire did you end up running to your amp?
Can you please tell me how to connect 2 subwoofers and 2 speaker to a 4 channel amp
Assuming your subwoofers are enclosed, you should easily be able to run speaker wire from your amp to your subs and speakers, however I can't help you without the loads of each sorry
Does it require the Rockford Fosgate stereo system from factory?
Tanishq Matharu no it doesn’t. This install was all done without the factory Rockford fosgate sound system
So I got a subwoofer installed about 7 years ago. And
now the left passenger subwoofer disconnect reconnect when driving on bumpy roads please help my friend. Any ideas?
Just sounds like faulty wiring/dodgy connection man. Especially if it’s coming off and on. Make sure it’s a solid secure connection to the Sub
Thank you. I will check the connections. The place where I took it did a bad job.
what? you couldn't find any smaller speaker wire?
Hey man. This is what comes in speaker wiring packs. Thanks for your comment though!
Hola como puedo poner el rca en un radio de frabrica
Roberto Michell compra un output convertidor y usa las bocinas de atrás para tener señal
The sub wire looks way too small. I don't even use that small a gauge on my mids and tweets. Get some 16 gauge AT LEAST! 🤭
Awesome job man! I am SO glad my video was able to help establish the fact you didn't use this gauge wire on your mids and tweets. Happy to help
@@tomelliott8096 Don't be salty. Didn't mean to criticize. Just think its best to get decent wire since you and others are spending hundreds/thousands on stereo equipment and then skimp on wire.
Did it pound.
Yeah man! Got some huge bass without even tuning the amp. But have tuned it now and it goes well!
would this be the same process for a stock head unit lancer?
Calvy Films depends if ur stock head unit has rca outputs (won’t work properly without rcas) you may need a hi-level converter to use stock head unit if it doesn’t, but yes similar process just rcas may be an issue
Bro, the reason those speaker screw fixtures have a hole in the top is so u can feed the wire into that top hole and pull the connector nut up the wire, wrap the wire around the connection and screw that over the top so the feeds up n out of the top of that screw nut, not hanging out bottom like tap worm hanging of a dogs arse! 🤣🤣🤣
Ice Coffee hey man. I’m really sorry but I have no idea what you’re talking about? Also I think you mean tape worm? But thanks for the views ✌🏻
hi i like your face
This is how people start their car on fire, small power wire guage and speaker wire. Smh
brian salas are you actually being serious.....? Or.....like....are you just being silly like your profile picture? Go comment on another video please. But also please subscribe
Tom Elliott at least its not a v6 like yours, or maybe a v4🤷♂️😮
brian salas u really gonna flex a car u dont have?😂